PC running very slow XP after installing SP3, can I reinstall?
My PC is turned sssslloooowwwwwlllyyy both since the installation of SP3. I do not want to troubleshoot SP3 for now, so can I remove and reinstall? My PC is quite old in years of PC, but performance has been acceptable for me up until SP3 came.
Thank you
Bidwin
It is important to disable programs such as Webroot before installing SP3. Personally, I prefer to install the stand-alone version of SP3 while I'm offline and after setting up a clean boot:
http://www.Microsoft.com/download/en/details.aspx?ID=24
Also, have a look here:
If you want to solve your problem of performance, set up a CleanBoot and systematically add back programs/process until you figure out the problem:
http://support.Microsoft.com/kb/310353
Also make sure your transfer mode:
http://www.technize.com/is-your-hard-disk-CDDVD-drives-too-slow-while-copying/
You have Windows Search 4.0 installed? (It can be a nightmare performance!)
Automatic updates is spent in form Windows Update Microsoft Update? That can be a problem, too.
Tags: Windows
Similar Questions
-
Very slow PC after installing xp sp3
I recently installed windows xp SP3 on my PC. Once all installed began to go very very slow. I ran avast antivirus, once disabled or uninstalled the PC worked fine, so I removed and replaced by AVG 2011. The same thing is happening again. It seems to be a conflict between the installation of SP3 and both of these virus protection software.
Does anyone have experience of this and how to fix it?
Or someone has a suggestion of a different virus software to use?
Thank you very much
Hi Gordon,.
Try the following.
Method 1: You can check if installing Microsoft Security Essentials of AVG in place can help.
Method 2: Check to see if this article helps you.
How to set performance options in Windows XP
See also:
-
ZoomBrowser ex running very slow after reloading.
Recently restored my HP 2000 return to settings factory & all works well except the Canon Zoombrowser ex, running very slow. Had no problem before reloading. Any suggestions?
Hello stephanie,.
You may simply update to the latest version to fix this problem. Visit the Canon Website, here, for the latest version information.
You will need to follow this link and enter your model information when prompted.
-
my computer runs very slow, what can I do?
my computer runs very slow, what can I do?
* original title - performance and security in Internet Explorer *.
Hello
Use the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps and happy holidays!
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Windows Update or automatic updates no longer work after installing SP3?
Recently I photographed two XP machines. A a Latitude D600 and also an Optiplex 745 with Windows XP SP2. I can deploy SP3 in our process of the image. First run I did. Once installed SP3 updates no longer work. I found this article KB http://support.microsoft.com/kb/943144 and tried the suggestions here and FixIt MS, no luck. Then I thought why not try again maybe all the trial and error messed up something. I reimage but this time choose to do not to install SP3 immediately. Once done I run Windows Update and it works, until it installs SP3 then is no longer functions. I tried the above steps once again, no luck. I then leave the PC for 48 hours to see if the automatic updates the shot but they do not have. By other suggestions online I wrote a small batch file that updates several components of Windows Update (dll) which made no difference, and yes I'm in the last WindowsUpdateAgent. Please any help on this would be welcome. We move away XP but we have still a few dozen or more systems deployment running XP and this question slows down my work courses as I spend time troubleshooting instead of being able to finish and move along.
Hello
I suggest you to download and install Windows XP service pack 3 manually and check to see if the same problem happens:
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3It will be useful.
-
DVD player doesn't work after installing SP3 for Windows XP.
DVD player doesn't work after installing SP3 for Windows XP. That it disappeared from "MY COMPUTER". Device Manager sees it, but there's a yellow exclamation mark over it. See the BIOS of the motherboard and it still works in the BACK. I know SP3 is a collection of updates, but I'm not sure that is my problem. I suspect it's one of the more recent cause I have Windows automatic updates is turned on. Thank you.
Hello Superhornet142,
Thank you for your message. Click HERE and run the FixIt! Please let us know if it did or did not help to solve your problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
My computer hp pavilion laptop runs very slow please help
I bought a computer hp laptop pavilion g6 with i3 4 GB of ram and 1 GB graphics. It is only 9 months old and I've used it about 50 ~ 70 times alone. And now, it is very slow. I installed only 26 programs and no any program is larger than 1.5 GB but now it is running very slow and am very lag. So please help me what should I do?Open the troubleshooter of Performance
http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-TroubleshooterOptimize Windows 7 for better performance
http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performanceWays to improve your computer's performance
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance -
Some games run very slow on Windows 8, as...
Some games run very slow on Windows 8 as (chicken Invasion "v1, v2, v3" in red alert 2, Age of Empire 2)
but on Windows 7 on the same Machine perform perfectly, I tried to install DirectX,.
and tried to install the latest Version of the Driver VGA for Windows8 and tried to change VGA (Nvidia, AMD, Intel)
but the games (not all games just a few) still running slow...? !!!
Help, please...Wrong, wrong, wrong.
This is entirely based on compatibility to a level beyond what is offered in the standard "Windows compatibility" section. In addition to this, everything you said had absolutely nothing to do with the question. This has nothing to do with starting or whatever it is in the same direction.
What is happening is that something is interfering with the normal functioning of the game because of changes in the kernel of the operating system because it has been updated / rewritten since the inception of Windows XP.
@SOVIETTION
The most likely solution for you has nothing to do with the videobuffer here is how fix you it:Find the Red Alert installation directory and find the file * md.ini.
In revenge for Red Alert 2/Yuri, it will be 'RA2MD. INI"(feel free to make a backup of the file before proceeding)
Open it with your favorite text editor (Notepad for most people)
Scroll down until you find the section [Video]
Just below you will add this line-
VideoBackBuffer = no
Save the file in the same place and load the game.Enjoy!
The VideoBackBuffer = none works perfectly, but in my case I also had to set the compatibility mode to Windows XP SP2.
Bravo for you!
-
My windows 8.1 is running very slow and freezes from time to time.
My windows 8.1 is running very slow and freezes from time to time. So I ran sfc/scannow. It finds corrupted files, but could not correct. So I ran "dism / online/cleanup-image /restorehealth ' but there as well. Please help as soon as possible. Thank you!!!
Original title: find files corrupt after sfc/scannow and could not repair
Hello Akash,
Thanks for the reply.
As you said, after completing the scan found SFC, you get an error message indicating that there is corruption but was not repaired. Then, please follow the following suggestions to solve the problem.
Use the System File Checker tool to repair missing or corrupted system files
(Refer to: manually replace the corrupted file with a good copy of the file)
http://support.Microsoft.com/kb/929833/en-us
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
-
Games led by 7 Microsoft running very slow and draggy
I still have a problem to play all the games on my new computer, which is managed by Windows 7. The game runs very slow and response of the mouse and other controls are slow and draggy. Please notify.
What video card you are using as well as the model and brand of PC?
Have you updated all readers more recent? If this is not the case consult your OEM and download all the latest drivers for Win 7
MCP. MCDST. LVL 80
-
After installing CC15 can remove CC14?
After installing CC15 can remove CC14?
You can have both versions on the same computer.
However, if you want to uninstall the CC 2014 version, you can go ahead and uninstall.
-
Satellite L855-14R: games running very slow after installing Win 7
Hi guys,.
I have the L855-14R satellite, which came with windows pre-installed 8.
I used win 8 during a time and games have been works ok.
So I decided to install a copy of windows 7 ultimate 64-bit.I downloaded all the drivers from toshiba support and it seems to work fine until I started the same game I played before.
He was running very very slow even on low graphics settings.
No idea of what went wrong after the win 7 installation?
Have Hmm you installed the driver of ATI graphics card?
Maybe the game uses the Intel HD internal graphic that is part of the Intel Core i7-3630QM processor? -
My macbook air 13 "(2015) is very slow, even after a clean install"
Hello
I have a macbook air 13 "from 2015 and it is VERY slow. I did a clean install from scratch of El Capitan (10.11.06) and always very slow.
Etrecheck give ' "Performance: poor"»
Is there a hardware problem? or what to do?
Thank you
EtreCheck version: 3.0.6 (315)
Report generated 2016-10-05 10:18:11
Download EtreCheck from https://etrecheck.com
Duration 17:11
Performance: poor
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Computer is too slow
Description:
too slow
MacBook Air (13 inch, early 2015)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook Air - model: MacBookAir7, 2
1 1.6 GHz Intel Core i5 CPU: 2 strands
8 GB RAM not extensible
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en0: 802.11 a/b/g/n/ac
Battery: Health = Normal - Cycle count = 40
Intel HD 6000 graphics card
Color LCD 1440 x 900
OS X El Capitan 10.11.6 (15-1004) - since startup time: less than an hour
SM0128G SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) / [Startup]: 120,10 (Go 104.05 free)
Storage of carrots: disk0s2 120.47 GB Online
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
[no charge] 6 tasks Apple
tasks of Apple 166 [loading]
[running] Apple 58 jobs
[killed] 9 tasks of Apple
9 killed process lack of RAM
[no charge] 47 Apple jobs
[loading] 158 jobs Apple
[running] Apple 77 jobs
[killed] 8 tasks of Apple
8 killed process lack of RAM
[loading] com.macpaw.CleanMyMac3.Agent.plist (2016-10-04) [Support]
[loading] com.bittorrent.uTorrent.plist (2016-10-04)
[loading] com.macpaw.CleanMyMac3.Scheduler.plist (2016-10-05)
iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
uTorrent program (/ Applications/uTorrent.app)
CleanMyMac 3 Menu program (/ Applications/CleanMyMac 3.app/Contents/MacOS/CleanMyMac 3 Menu.app)
Default browser: 601 - SDK 10.11 (2016-09-03)
QuickTime Plugin: 7.7.3 (2016-07-09)
None
Time Machine not configured!
14% WindowServer
4% kernel_task
0% SystemUIServer
0% cloudpaird
Top of page process of memory: ⓘ
670 MB kernel_task
Mdworker (11) 188 MB
Com.apple.CommerceKit.TransactionService (2) 41 MB
Finder 41 MB
Mds_stores 33 MB
5.02 GB of free RAM
2.98 used GB RAM (1.82 GB being cached)
40 MB used Swap
5 October 2016, 09:38:39 test - passed
Hello, have you tried to reset the management system (SCM) controller on your Mac - Apple Support?
-
Black screen with mouse pointer count on reboot after installing SP3
I tried to install Service Pack 3 on a PC running XP Home Edition (new installation).
Although Microsoft Update has finished installing SP3 and the computer reboots, I get the XP installation screen base with the message "Please wait...". ", which disappears after a few seconds, leaving me with a black screen with only the mouse pointer.
The mouse pointer moves then the PC broke down, well that no matter how long I leave nothing happens.
I tried to uninstall SP3 and do it again (when I Uninstall SP3, Windows starts very well) and also uninstall SP3 as well as my Antivirus and try the installation again. But whenever I'm just left whit black screen.
Try to update with the custom option. I had problems like this before. Usually you are missing a driver or something of this kind that makes you hang. To update while the custom option, with the exception of SP3. Reboot several times the installation of updates with the "Custom" option Once all updates have been installed except SP3, you can try SP3 and see what happens. This usually takes care of it when I have the same problem. Serving the community one computer at a time www.therushvillecomputerguy.com please post a reply to let us know whether or not our response helped.
-
Hello ~
We had had this IMac for more than 7 years and recently started running very slowly. I do not understand, by EtreCheck the RAM we are weak, but someone else can guide me on what else can do, by this report, to fix the slowness?
EtreCheck version: 2.9.10 (261)
Report generated 2016-03-25 10:23:15
Download EtreCheck from https://etrecheck.com
Time 04:22
Performance: good
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Click [delete] to remove the adware.
Problem: Computer is too slow
Description:
My computer is very slow
iMac (24 inch, early 2008)
[Data sheet] - [User Guide] - [warranty & Service]
iMac - model: iMac8, 1
1 2.8 GHz Intel Core 2 Duo CPU: 2 strands
2 GB RAM - Insufficient RAM! Extensible - [Instructions]
BANK 0/DIMM0
1 GB DDR2 SDRAM 800 MHz ok
BANK 1/DIMM1
1 GB DDR2 SDRAM 800 MHz ok
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
ATI Radeon HD 2600 Pro - VRAM: 256 MB
iMac 1920 x 1200
OS X Yosemite 10.10.5 (14F1605) - time since started: about one day
Hitachi HDP725032GLA380 disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 319,21 (Go 40,79 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Built-in ISight from Apple Inc..
Fitbit Fitbit Inc. Base Station.
Apple Inc. BRCM2046 hub.
Apple Inc. Bluetooth USB host controller.
M400 Polar Polar Electro Oy
Computer, Inc. Apple IR receiver.
Mac App Store and identified developers
~/Library/LaunchAgents/com.onlineapplicationnotice.AppNotice.plist
An adware file found. [Remove]
/ Library/Extensions
com.joshuawise.kexts.HoRNDIS [no charge] (6 - 10.6 SDK - 2016-03-22) [Support]
/ System/Library/Extensions
com.Aliph.driver.jstub [no charge] (1.1.2 - SDK 10.7 - 2016-03-22) [Support]
com.olympus.CamBlockCommandsDevice [no charge] (2.0.0 - 2016-03-22) [Support]
com.olympus.CamBlockCommandsDeviceUP [no charge] (2.0.0 - 2016-03-22) [Support]
/System/Library/Extensions/OlympusDSCDriver.kext/contents/plugins
com.olympus.CamFWSerialBusProtocolTransport [no charge] (2.0.0 - 2006-11-30) [Support]
com.olympus.CamUSBMassStorageClass [no charge] (2.0.0 - 2006-11-30) [Support]
ParallelsDesktopTransporter: Path: / Library/StartupItems/ParallelsDesktopTransporter
Startup items are obsolete in OS X Yosemite
[loaded] 6 tasks Apple
[loading] 144 tasks Apple
[operation] 42 tasks Apple
[killed] 20 tasks Apple
20 killed process lack of RAM
[loaded] 44 tasks Apple
[loading] 136 tasks Apple
[operation] 67 tasks Apple
[killed] 15 tasks Apple
15 killed process lack of RAM
[failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-02-21) [Support]
[no charge] com.oracle.java.Java - Updater.plist [Support]
[failure] com.sophos.uiserver.plist (2012-12-26) [Support]
[loading] com.adobe.ARMDC.Communicator.plist (2016-02-21) [Support]
[loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-02-21) [Support]
[failure] com.adobe.fpsaud.plist (2016-03-07) [Support]
com.Apple.aelwriter.plist [loading]
[operation] com.fitbit.galileod.plist (2015-10-30) [Support]
[no charge] com.oracle.java.Helper - Tool.plist [Support]
[loading] com.skype.skypeinstaller.plist (2014-03-07) [Support]
[failure] com.sophos.autoupdate.plist (2012-11-07) [Support]
[failure] com.sophos.intercheck.plist (2012-11-07) [Support]
[failure] com.sophos.notification.plist (2012-11-07) [Support]
[failure] com.adobe.ARM. [...]. plist (2011-10-07) [Support]
com.apple.SafariBookmarksSyncer.plist [failure]
[loading] com.google.keystone.agent.plist (2016-03-03) [Support]
[operation] com.onlineapplicationnotice.AppNotice.plist (2016-02-22) Adware! [Remove]
~/Library/application support/tap/AppNotice
iTunesHelper UNKNOWN (missing value)
Jose UNKNOWN (missing value)
Safari application (/ Applications/Safari.app)
AdobeResourceSynchronizer UNKNOWN (missing value)
Maxillary Updater application (jaw Updater.app/Applications /)
FlowSync application (/ Applications/FlowSync.app)
Fitbit connect Menubar Helper Application (/ Applications/Fitbit Connect.app/Contents/MacOS/Fitbit Connect Helper.app of the menu bar)
[ongoing] com.aliph.Jawbone_Updater.61660
[ongoing] com.fitbit.GalileoMenubar.88924
[ongoing] fi.polar.FlowSync.94036
[loading] 360 tasks Apple
[operation] 126 tasks Apple
[killed] 40 tasks Apple
Web of Google Earth plugin: 6.0 (2010-11-23) [Support]
Default browser: 600 - SDK 10.10 (2015-07-16)
Flip4Mac WMV Plugin: 2.4.0.11 (2011-10-16) [Support]
CouponPrinter-FireFox: Version 1.1.5 (2010-02-01)
OfficeLiveBrowserPlugin: 12.3.6 (2013-04-28) [Support]
AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-14) [Support]
FlashPlayer - 10.6: 21.0.0.182 - SDK 10.6 (2016-03-12) [Support]
Silverlight: 4.0.60531.0 (2011-10-16) [Support]
QuickTime Plugin: 7.7.3 (2015-10-26)
Flash Player: 21.0.0.182 - SDK 10.6 (2016-03-12) obsolete! Update
CitrixICAClientPlugIn: 11.2.0 (2011-10-26) [Support]
iPhotoPhotocast: 7.0 (2010-04-03)
AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-14) [Support]
CANONiMAGEGATEWAYDL: 3.0.0.2 (2009-03-06) [Support]
CouponPrinter-FireFox_v2: Version 1.1.6 (2011-09-20) [Support]
MeetingJoinPlugin: Unknown - SDK 10.2 (2015-08-13) [Support]
BrowserPlus_2.9.8: 2.9.8 (2010-09-09) [Support]
fbplugin_1_0_3: unknown (2010-02-26) [Support]
CustomerAid (2016-03-07)
SlickSavings (2015-12-06)
BrowserPlus (2010-09-09) [Support]
Citrix Online plugin (2011-10-26) [Support]
Flash Player (2016-03-07) [Support]
MacFUSE (2009-06-03) [Support]
Skip system files: No.
Mobile backups: OFF
Automatic backup: NON - automatic backup disabled
Volumes to back up:
Macintosh HD: Disc size: 319,21 GB disc used: 278,43 GB
Destinations:
My book [Local]
Total size: 999,37 GB
Total number of backups: 8
An older backup: 21/03/10, 19:02
Last backup: 12/04/10, 23:00
Size of backup drive: Excellent
Backup size GB 999,37 > (disk size 319,21 GB X 3)
24% mdworker (6)
3% WindowServer
1% fontd
1% kernel_task
0% com.apple.WebKit.Plugin.64
Top of page process of memory: ⓘ
Kernel_task 332 MB
Com.apple.WebKit.WebContent 199 MB
Safari 59 MB
Mdworker (6) 51 MB
Com.apple.WebKit.Plugin.64 35 MB
44 MB of free RAM
1.96 GB used RAM (377 MB cache)
45 MB used Swap
24 March 2016, 15:21:01 test - passed
Thank you
Silvia
1. Uninstall sophos av-ware in accordance with the instructions of developers.
It robs your system of valuable resources and not necessary with OS X
2 remove any UN-nessessary launch, the user login items and Internet Plugins user.
line flow and execution less stuff at the same time
3. upgrade your RAM.
a. for the Apple Installation Instructions
See > install memory in an iMac - Apple Support
b. 2 x 2 = 4 GB kit from OWC macsales.com is only $32
See > http://eshop.macsales.com/shop/memory/iMac/Intel_Core_2_Duo_PC2-6400
Maybe you are looking for
-
Changed the time on pc and suddenly will not work Skype?
Hi I just got this phone today and have already run into large sum of problems. I misclicked by set up of windows 8 and taken the wrong time zone, forget I did what I leave the laptop itself implemented, I didn't know it until I had already installed
-
Anyone having problems with iOS 9.2.1? Storage problems, apps not working?
-
I can't access my hotmail account more because of a message that tells me to disconnect, and then click my account from Outlook web; which then brings back me to ordinary sign in because I have no direct application on the web. original title: can co
-
long-lasting problems after windows scammersr had remote control of PC
I got Asian male phone call to the effect that I had serious problems with a virus on my computer. He claimed to be the appeal on behalf of Microsoft Windows. Is not not in computer, I followed a number of directions to him which eventually led to hi
-
In Windows XP, when I go to 'Start' in the 'search' and specify a word in the name of the file and then highlight that it is a PDF file I'm looking for, it is unable to locate the file. I know that the file is there. Why is this happening?