PC stop dow unexpectedly

Similar Questions

• Windows (Vista) stop way unexpectedly in the middle of sessions and caused the problem would BlueScreen. Here are more details: OS Version: 6.0.6002.2.2.0.768.3

  Frequent unexpected stops in the middle of sessions.  Problem event name is BlueScreen.  This problem is related to the Service Pack 2.0.

  Hi Mir,

  1. do you get an error with the Blue Screen Error of death (BSOD) code?
  2. When you get this error message?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the steps in the link and check if that helps.
  http://support.Microsoft.com/kb/958233

  Method 2: You can also check out the link and check if it helps.
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: This link is also applicable to Windows Vista.

  Method 3: Check related error in the observer of events and after return.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• checkbook has stopped working unexpectedly

  checkbook has stopped working

  What is "checkbook"? What is an application that you downloaded?

• USB ports stopped working unexpectedly

  Hi, I am currently on "Toshiba Satellite C655"run"Windows 7 Home Premium". It's a laptop of 2009 model (2 GB). Last night (24/02/14) my USB Ports stopped working, they have been and continue to read anything every time I have to plug my devices. I usually only connect a cooling block and a USB mouse to the computer. They worked perfectly until I disconnected the. When I reconnect them, they work momentarily, and then I hear the beep sounds when you eject a device. I tried to connect several flashdrives, a printer, and one I tried the following hotfixes:

  Note: The order of numbering has nothing to do with the order, I tried to apply each patch unless specified elsewhere. This computer had Windows 7 Home Premium REINSTALLED at some point. Just for your information. This message was made when there are others with the same problem is due to the fact that no solution not specified by Microsoft Technical Support or the Microsoft community were effective.

  1) System Restore to the last known point, where they worked (and still). (Point restoration @ 15/02/24)

  2) Windows Update

  3) turn off the computer, disconnect the battery and the power supply and holding 'On' button for 10seconds.

  (Note: whenever I turn on the computer now they work only for a moment, usually from 60 to 180 seconds.)

  (4) Start > research ' Device Manager '> "De Bus USB controllers" Expand and turn off and restart the computer. They are re - activate automatically but my problem persists.

  (5) download and run "Microsoft FixIt.WinUSB... ", on the 1st, I had a problem with devices not updated. But I actually watch updates by using Windows Update and ""searching for hardware changes "" on USB Bus controllers "." I then did a 'System Restore' and now Microsoft FixIt found no problem but the USB Ports don't always work.

  (6) will ' services.msc"and change the Startup Type of Manual to Automatic for Windows install and restart Windows."

  7) regedit

  8) sfc/scannow

  I am really lost with this problem now. My laptop works and worked perfectly fine until this problem occurred. I have fixed minor problems with computers before, but this is a bad joke for me now. If someone could please help me with this problem I would appreciate it a lot. Thank you very much.

  Thank you for your help, but I discovered something funny on my computer. My cooling package (product name: Laptop Cooling Pad NSB;) HYCF-6181-2 model number) is to disable my USB ports when I plug. If I leave it unplugged and restart my computer, my USB mouse is still working on a port. Also tried using my USB and other devices. The problem is my block of cooling that strangely disables my USB ports, whenever I plug. Thank you very much for your quick response, fortunately the answer might help me in the future. For now, I have solved my problem.

• BlueScreen, stop Windows unexpectedly, BCCode: a

  Hello

  My computer has been restarted by itself at random times. I have the files .dmp and sysdata.xml saved and ready to download/send if needed to help solve my problem. This problem has just started after installing a SSD which replaced my original non - SSD hard drive. I installed a new copy of Windows 7 (had XP on previous hard disk). Last message I received was:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.1
  Locale ID: 1033

  More information about the problem:
  BCCode: a
  BCP1: A49DA4FF
  BCP2: 00000000
  BCP3: 00000000
  BCP4: 818C88F6
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\071513-8392-01.dmp
  C:\Users\Josh\AppData\Local\Temp\WER-11824-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Hi Josh,.

  Download and install the hotfix from the link below and see if it helps.

  Error message on a blue screen on a computer that is running Windows 7 or Windows Server 2008 R2: "STOP: 0x0000000A"

• Adobe InDesign stop way unexpected-Mac OSX

  Today, I got the message "Adobe InDesign unexpectedly closed" while trying to open InDesign CS.  By clicking on "Restart" only brings back the same error message.

  I tried trashing preferences, which is the main thing that everyone says to do.  The only thing different that happened today, it was there was action Adobe Updater, which I do not much pay attention to.

  I'm on OSX 10.5.8.

  I use InDesign CS1, PhotoShop CS3, Bridge CS3 and LIghtroom2.

  Any ideas on how to get ID works again?

  Thank you!

  It looks like to what could be the same problem as described in this article, which I regret I didn't know at the time you posted. InDesign and Illustrator CS or CS2 fail to launch after you apply the update to Mac OS X Acrobat 8.2

• Mobile suddenly stops the post 10 ios upgrade

  My iphone6 intermittently stop unexpectedly post the upgrade to ios10.sometimes the phone is too slow to react. Can someone help me on this?

  Hello surehsusin,

  Welcome to Apple Support communities.

  I see that your iPhone 6 to stop intermittently, unexpectedly after updating to iOS 10, and the iPhone is slow to respond. I certainly wouldn't want that happy to my iPhone, and I want you to be able to rely on your device. I can help you with this problem.

  Since you just updated to iOS 10, I take a look at the App Store and ensure that your applications have the latest updates. After a new version of the iOS software, developers will often release new versions app measure compatibility improvements.

  Please follow these steps:

  1. Open the App Store and press updates.
  2. If updates are available, click all to update.
  3. If requested, enter your Apple ID.

  Then please reboot your iPhone, iPad or iPod touchand test to see if you get the same result with the iPhone intermittently closing.

  All the best.

• Satellite P70-A-11 q - Windows 8.1 stops during the boot process

  Hello.
  I have a q P70-A-11. almost from the first day I got the camera that I have problems with starting.
  The OS is installed on a 250 GB SSD.

  Treat it as I turn on the laptop and its still the boot stops down unexpectedly without an error message.
  This happens almost every time 2nd, I try to start the laptop.

  I know this isn't a lot of information but I don't have any newspapers, or something that I can help you.
  Concerning

  You are right. There isn't a lot of information on this virtual path, it is not easy to say what the problem is.
  What is your laptop preinstalled with original OS that you got with it? I presume that the only change is upgrade SSD, right?
  So if I understand you well you traded original HDD with new SSDS and original recovery image is installed.
  This problem started immediately after the upgrade to SSD?
  When you put the old HDD inside the same thing from happening again?

• Visa read stops execution

  Hi all

  I have a little problem with the control of my power supply E3631A Agilent via Labview:

  I downlaoded all drivers and with the help of you guys I even persuaded that it is running properly.

  At least that's what I thought.

  Turns out he didn't really. At some point the VI just stops.

  Using the execution mode of nail I knew where the problem was:

  The VISA read error query of the configure output has stopped working.

  I have no explanation for it. I get unpredictable and I have not yet managed to influence by changing the different settings.

  (And I tried it for a while now..)

  I built a very simple example VI to show you where the problem lies.

  Explanation:

  I'm basically feeding the output a voltage variable and at the same time measuring how long the vi fonctionnee already has...

  I thank you very much in advance,

  keksbold

  OK it looks like as the time to copy this section of the FAQ: (posted in a place not yet public ~ ~ ~ Hey Jordan? is still FAQ on the right way?)

  "

  In this topic, we will discuss some of the common problems that have been observed using devices with LabVIEW on Windows operating systems.  Many of these points apply also in other environments, but the examples will use the Windows 7 operating system.

  FAQ 1: USB device stops working unexpectedly.

  The first thing to look at is the OS power save options.  There is a global trend towards "Green" electronic development and energy the coast to stars become fairly common.  "If his is used not to turn it off" is not new.  Cave men learned how to Bank a fire in order to preserve the energy that would otherwise be wasted.  Similarly, the Windows operating system has an energy saving function to stop power to the USB hubs when no user activity is present.  In automated systems, this feature can cause problems since remove power USB hub will stop the USB device.   Solution: use Device Manager to change the Power Options USB hub.

  

  FAQ2: I put the power options and my device connection is still not reliable: Don't forget, the USB ports on the computer are often the least expensive that can be mounted on the chassis and system share the PC power supply USB-powered. Most of the uses of USB are temporary connections such as a USB key or a camera.  These connections don't require high reliability because there the user interacts with it.  Mounted sudden power and fault tolerance at worst cause the operator to retry the transfer of data.  Automated systems require a bit more robustness.  Solutions:

  1) ALWAYS use a free external powered hub. Perform your due diligence genius and to inspect devices specifications too - if you do not find them for this device which should clue pick you a product from a vendor who published their specifications.

  2) high noise environments require the use of ferrites on the USB cable- and do not buy the cheapest cable either! The good markets are poorly protected.

  3) PROTECT connections HUB-if you have a USB 2.0 device and Joe User plugs in a 1.0 device into an open slot, managed by the same hub-Bingo all ports on the rear hub can convert USB1.0.  WORSE, there are a lot of damaged or marginally engineered USB devices out there.  Joe User should cause power fluctuations when it is inserted or removed from the hub just don't let it happen!

  FAQ3: I test USB devices and the operating system can not find more.

  It is a Plug-and-Play feature that deserves exposure.  When you connect a device P - n - P BONE remembers his serial number in an entry in HKEY registry (hive-Key).  This is useful when (for example), you want a specific instrument, say a NOR-USB-6008, to appear as a device DAQmx with VISA Alias "MyDAQ1" whenever it is plugged.  On the other hand, if you want to test a range of USB-serial converters that can be problematic because the pilot of P-n-P will mount the first serial number like "COM3" and the other as "COM4" Add infinitum until the controller of the enumerator in the registry and the VISA recognized alias adjust upward.  Solution: use the Windows registry API and the API of hardware in LabVIEW to clear unused VISA alias and HKEY entered.   Speak with your professional COMPUTING staff structure HKEY and possible side effects before developing a plan to modify registry entries.

• Questions on the computer stop, must try to stop twice

  Original title: twice to close...

  Windows xp-Dell Latitude E6500... when I try to shut down or restart, I have to try twice before his arrest... What's wrong?

  Hello

  Remember to make changes to the computer before this problem?

  I suggest you to disconnect all external devices such as printer, scanner, etc, that are attached to the system and check if the issue persist.

  Follow these steps:

  Method 1: I suggest do you a clean boot and check if you are able to close download the computer correctly.

  How to configure Windows XP to start in a "clean boot" stat
  http://support.Microsoft.com/kb/310353

  Note: -after troubleshooting, turn on the computer to a normal startup.

  Method 2: Advanced Troubleshooting for shutdown problems in Windows XP

  http://support.Microsoft.com/kb/308029

  See the article:
  
  Windows unresponsive during Windows XP stop dow
  http://support.Microsoft.com/kb/307274

• Computer stops when the power to the computer to sleep, on computer virus problem

  Hello

  When I put my pc sleep and wake him up, a window pops up saying that the machine has stopped unexpectedly, and then the pc automatically reboots by itself,.

  after reboot, a window box comes in saying that the pc rebooted one... and that Windows will inform me what to do.  What happened yesterday and today.

  I must say however that Friday evening, August 24, my pc was slow work, since a few days I noticed, but Friday it was slower, I could see that something

  moving in often via the little blue wheel icon that shows that something is happening.

  I "had" McAfee Total Protection in my machine since 08/05/2012 and last night I clicked on the McAfee to do a full Scan of my pc, because I thought there was something fishy in it.  McAfee Full Scan clicked, a blue page with white letters arrived, quick and deep that I saw Dump numbers going up to 100, then the blue screen came out and restarted my PC.  After reboot a small box of Windows came to say that the machine had stop unexpectedly, he

  has run a control bar, when in fact something like 'your stop machine unexpectedly and windows will inform you what to do', something like that.  I then

  new click the McAfee icon, click the full sweep, the same thing happens again anywhere.

  Then, I went to the website of McAfee and talkative with Technical Support, he came into my pc to see for himself, he opened the Navigation button and had IP

  address to which McAfee was 'downtime '.  He told me I had a virus in my computer... He gave me a phone # to call for assistance in the removal of the virus. I called, the man

  did not come into my PC to see, he said, I had to pay $89. something taken him. I closed with him, went with the customer, aksed for my refund...

  sad situation, but I withdrew my PC with McAfee.

  I've downloaded Malwarebytes, checked my PC had 2 Trojan horses, you click on Remove to remove the.  Still had Malwarebytes in pc, I went to Trend Micro, which I had before in my pc for years and renewed my Sub. with them and has installed. After doing a full Scan, no virus.

  I made a 'machine checking if' work properly AM early this morning.

  This afternoon, August 25. I opened my pc, the audit began, time + after pc restarted normally, then all of a sudden the blue window came with white letters, dump numbers went up to 100 then pc rebooted, Windows little box came "... unexpected" and normal ran pc after.  Worked a bit on the pc then place to sleep so I could go somewhere, when I clicked on the mouse to wake up, as I always do in the pc, it awakened, blue page with while that the lettering came, took place on the same things as above.  PC ran good, had to go eat, put the pc to sleep, came back same thing occurred again

  I searched what happens and found nothing.  I went to the community, there nothing either.  So I'm here today to help hoping that you know what is happening.

  Thank you for your time and your help.

  Bebb

  Hello

  Currently, you have a program full-time antivirus installed on the computer?

  If you do not have one, I suggest you to install Microsoft Security Essentials.  Follow this link to download.
  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials

  Follow these methods.

  Method 1: Run a Scanner online from Microsoft.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2: To remove the virus manually, see the article:

  How to remove a computer virus?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

  Important: The Troubleshooting Manual in the link above steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Gel iPhone... !

  I am facing problem with my iPhone on gel, it stops abruptly by acting and just gel util I block and unblock again

  I tried hard reset and restore all but the problem remains the same

  Please gave me some tips how can I solve this problem, because it becomes a headache for me now. Thank you!

  IPhone-6

  software update 10.0.2

  Hello Has1710,

  Welcome to the communities of Apple Support!

  I see that your iPhone is icy and stops working unexpectedly. You lock and unlock the iPhone, and then he answers. Also, you did a restart of the force and restored, and remains the same question. We appreciate certainly take you time out of your day to contact us about this, and I am sure that you are ready to get this resolved.

  You mentioned that you have restored. You have restored to factory settings? If this isn't the case, let's go and save the data to your iPhone (if you haven't already done so) and restore settings to see if you get the same problem after that. Restore factory settings removes all added applications and software on the iPhone which could be causing a conflict.

  The following articles will help with this:
  The backup of your iPhone, iPad and iPod touch
  Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

  Please let us know if that helps.

  Best regards.

• Equium L300 shut downs suddenly because of overheating

  This computer is 5 years old.
  Original OS is Vista and I clean install of Windows 7 Ultimate 32 bit...
  I was improving the disk of 320 GB and 2 GB of Ram.

  I opened two or three times to clean dust from the FAN.
  It heats up so fast and so often that when I watch a video in full screen it stops itself.
  When I touch under the touchpad area, he's almost hurt to burn my fingers.

  When I press the power button to turn on the computer, the fan starts at the same time.

  is there a simple way to cool it fan and below the laptop? How to stop closing unexpected downs. ??

  > is there a simple way to cool it fan and below the laptop? How to stop the unexpected closure of downs?

  How to stop? Of course, the internal temperature is too high and therefore the machine will stop.

  Why the temperature is too high? Well, either the cooling modules may not cool properly the internals (CPU and GPU) or these parts (GPU and CPU) also produce a lot of heat.

  (1) cooling modules:
  Where the dust and debris prevents fans spin faster, the temperature would increase and laptop would be closed. You must make sure cooling modules are free of dust and that fans can run with performance of Paris.
  In the Windows power management settings, you can set the method of cooling performance. Optimized battery setting, the propeller would rotate more slowly, but it would increase the working time of battery.

  (2) you could decrease the performance of the processor. This can be done in Windows power management too. You can affect the performance of the CPU max 80-70%

  Another solution: try to use some external cooling blocks. There are a lot of devices on the market that could cool the laptop from the underside.

• Power supply does not work

  Hello

  I have a few problems with my Toshiba/plug of the adapter. A few weeks ago that my adapter just stopped working - don't know why, he suddenly didn't work.
  My MOM also has a Toshiba Satellite laptop, and our sheets are the same, then we could use hers.

  However the other day, its power cable also stopped working unexpectedly. Out of curiosity, my father has replaced the fuse on his own and it worked fine, until today when he stops just again! It flickered on a second and then stopped.

  We are not sure if it's the fuse again, but if it is someone there ideas why he continues to be?
  Could this be a fault with our electro folk guitars?
  I'm pretty useless with these things, so don't really have a clue. This is the engine we time mad - she got a lot of work to do on his laptop and he needs to take to work etc.

  Any help would be most appreciated!

  Hello

  On this path, it is not easy to say what may be the problem. Maybe the electronic power pack get in trouble, but only a detailed study can give you accurate answers. On this path we can only speculate what may be the problem.

  It will also be interesting to know what models of laptops you have.

• ReadyNAS 104 upgraded to OS 6.4.0 halt

  After upgrading to this version, I am unable to stop.

  The system hangs with "stop dow. Good bye. "- let him in this state of the day to the next.

  Power must be removed to a complete stop.

  Can he confirm beta 3 does correct none the shoutown with number custom MTU.