PCI Lock should be checked in MSConfig?

Similar Questions

• Processor does not reach 100% of the speed of the clock when 'PCI Lock' is disabled in the Advanced Start parameters

  Hi guys,.

  Ran into a strange problem, so thought I'd give this forum to try. Tried to discuss on the Windows forums community but they have been seen nothing of all this.

  I noticed that the machine felt slow in the last month, but never gave him much however. Today, for some reason, I opened the Task Manager and noticed that no matter how much charge the CPU is obtained, the speed does not pass more than 2.28 GHz (Standard clock speed is 2.3 GHz). Now, at first I thought that it could be the power settings, since I got the butterfly processor speed previously by reducing it to 95%. After a few game, I spread the power settings, since the system does not meet them if you cut the State of maximum power, the processor speed drops too. When the value to 100%, it does not more than 2.28 GHz. In other words, since it's a pocessor mode, because it reaches its full capacity, it won't in mode.

  I updated the drivers and BIOS from the manufacturers Web site. The only way to fix this is by checking the box 'PCI Lock' in the advanced in msconfig startup options. When the box is checked, the computer restarts and the processor works properly, increasing up to 3.3 GHz. The only problem with either once the box is checked, problems with other devices, for example, the network card is not recognized at all. Uncheck box reboot and network card functions as it should, but the processor is throttled.

  I don't know if it could have a bearing on the question somehow, but fails the secondary HARD disk spin down according to the power settings. It is supposed to stop after 1 minute, but despite having no activity (in resources, or audible reads/writes monitor) it keeps spinning. If you have any advice on the processor, maybe you have an idea on this instead? His eating his power and producing unnecessary heat and noise because the hard drive is used for backups.

  The specifications are:

  Reference Dell M3800

  Windows Pro 10

  CPU i7-4712HQ 2.3 GHz (up to 3.3 GHz)

  16 GB OF RAM

  512 Samsung SSD (with BONE)

  Secondary 1 to

  I don't know when the issue started, since performance was slow for about a month and I can't blame new facilities for this. The PCI lock seems the only way to solve the problem temporarily. All the drivers are up to date, even tried downgrading and upgrading the BIOS. Only the PCI lock seems to have no effect.

  Any help would be greatly appreciated!

  Hi cc171,.

  Thank you for your continued support.

  After a few more game, I'm desperate and "reset" of the operating system (keeping my files). That, to my surprise, did not help. I've done some windows system checks in the cmd (sfc and dism) and tools are a few corrupted files (which they were unable to repair due to files being corrupted as source). I then provided dism an iso windows fresh to keep system files to and managed to fix the image. Unfortunately, this does not solve my problem.

  Here are the corrupt system file that could not be repaired:

  Could not reproject corrupted file [23 ml:24] "? \C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll"; source file in the store is also corrupted

  I then proceeded to do a complete factory reset (because I lost all my applications anyway, there was nothing else for me to lose). The system restored to W8.1, which is really strange, because I deleted all the files of previous windows.old through disk cleanup. Even if I had retired, good news. The limitation was missing, and the drive turned down when realized. I've been invited to upgrade to W10, I did (the download process and installation is rather time consuming...) and once up and running, the CPU still works correctly.

  Of course, my next step, has been updated all my drivers using my product key on the DELL Web site.

  I downloaded everything manually and kept checking my processor after each installation/reboot. Everything worked fine until I installed the:

  * Intel platform dynamic and thermal setting driver *.

  After a reboot, the Task Manager showed once again to the top of the formidable GHz 2.28. I put a system restore point, just like windows has fully booted, before updating the drivers, so I decided to restore it at this point. No luck, the processor still be strangled. Because I have nothing to lose, once more, I do a reinstall full (which once more, the rolls be back to W8.1. After around an hour, the W10 up and running. I went to update all my drivers, exuding the platform driver and dynamic thermal setting, with reasonable success. The processor is no longer limited. The only problem, after installing the motion sensor driver, the HARD drive stopped spinning down. At this point, I don't have time to play, decided not to back down.

  Thus, at the end of the day, the culprit to my problems were the official DELL drivers:

  System utilities | Intel platform thermal and dynamic framework pilot (104 MB)

  &

  ST Microelectronics LNG3DMTR pilot sensor of movement (35 MB)

  With the new installation of Windows (and the Motion Sensor installed Driver), once more SFC/scannow found errors that cannot be repaired. Thorugh DISM, I managed to repair the image of the system, but the HARD drive always turns freely. More importantly, the limitation is GONE.

  Regarding your questions above, I don't have a chance to check if there is power or the current limit, but there's certainly been no thermal regulation. The CPU is still relatively fresh, and fans did turn, even if very quietly (now with the processor works properly the temperature rises up to 84 degrees (up 3.29 Ghz) and fans spin very hard under prolonged load).

  Regarding the HDD, no system or other utilities consulted the reader (analyses excluded antivirus, indexing and so forth that unchecked, the disc is only used as a manual backup). Even if the HARD drive isn't spinning down, no limit certainly makes life a lot easier. Ill wait for a new version of the driver for the motion detector see if it solves the problem, if not, disconnect the drive from the motherboard may be my only option.

  I don't know why the official Dell drivers could corrupt the file system, since they were after all, designed for this particular system, on this particular operating system. There are no other programs interfere with their installation and operation, given that the pilots were the first things to be updated.

  At the end of the day, I found the problem, it's a good step forward, but it seems that the resolution is out of my reach.

  Thanks for your help!

• that the boxes must be checked in msconfig for start up

  I have a HP for 5 years, what boxes should be checked in msconfig

  Hello

  Nothing THAT Msconfig startup should be checked. If you uncheck something then those
  programs will not start and you may lose their added features.

  Autoruns - free - see what programs are configured so that it starts automatically when
  your system boots and you connect. Autoruns also shows you the complete list of the registry
  and where applications can configure Auto-start for the files settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  I have a Mid-2010 Mac Pro Tower running OS Yosemite to which I would like to connect a Tower (G-Technology) G-Speed Q RAID via eSATA connection.  What type of card PCIe eSATA should I install in my Mac Pro tower to enable such a connection?

  https://eShop.MacSales.com/item/NewerTech/MXPCIE2E2U3/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6G2S2/

  https://eShop.MacSales.com/item/NewerTech/MXPCIE6GRS4E/

  https://eShop.MacSales.com/item/sonnet%20Technologies/TSATA6PROE2/

• What services should be checked in the system config? All are now checked.

  What services should be checked in the system config? All are now checked.

  Hey Micky,

  1. what exactly is you are doing?

  2. you try to disable all services?

  By default, all services are turned on.

  For more information, you can consult the following article:

  Using the System Configuration

• Windows 7 - after an update, receive 'records should be checked for consistency.

  Since this update, when I start windows, I get a message saying disks should be checked for consistency. Messages to appear that I have create a restore but then disappear until I can read. Windows starts normally. My Norton diagnostic report said that there is a problem in the C: Partition.

  Thanks to all who responded, but I contacted support Norton and they have managed to solve the problem very quickly.

• Should be checked for consistency

  I received the following message during the time I turn on my computer, "one of your drives should be checked for consistency. You can cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press a button within 10 seconds. »

  Then I press any key to cancel, but restart the computer again and the same message on the screen shows. Please let me know how I can fix this problem, thanks.

  After a regular stop. Turning off too soon may cause chkdsk run. But I guess you do.

  Interestingly, something different may be at stake.
  http://support.Microsoft.com/kb/831374 tells a similar message if there are too many files on the disk and that you are not running the latest service pack.

  If this happens during more than once then-
  Well, if it was the 1st time in 2nd or 3rd then maybe you don't shut down the computer properly, can you just don't let the scan disk utility (the tool that checks your hard drive for consistency) to complete its work when the pc starts. But if this is not the case, then maybe your hard drive has developed bad sectors, or there may be another problem with him.

  To check the conditions weather, the above is true then right-click on the drive on which is checked at startup and select scan disk. See the results and you will probably notice the problem yourself.

• Error: "one of the drives should be checked for consistency" to start the computer

  The original title: disk space

  My laptop is an Acer Aspire 5000 running with XP Home Edition. At a hard 100G drive with 2 partitions fat. Recursively shows problem at startup. The message displayed is "one of the drives should be checked for consistency. So when he was checked always check disk space and get stored at 41%. I tried to restore several times, but it is once again no place for a long time.

  Could you help me with this?

  Hi RodrigoGodinez,
   
  Sometimes the disk check always starts check the file system on one or more drives for consistency. If no button is pressed, the disk check is aborted. In fact, it is because a data structure of the disc or file is corrupted which can not be recovered and check disk always runs at Windows startup.
   
  Restart the computer and run the command chkdsk from the recovery console.
   
  To boot into the recovery console, see the following article:
  Description of the Windows XP Recovery Console for advanced users
   
  Additional reference on:
  Recovery Console overview
   
  For more information about the disk check, see:
  How to perform disk error checking in Windows XP
   
  Note: While running chkdsk on the drive if bad sectors are found on the hard drive when chkdsk attempts to repair this area so all available data on this risk to be lost.
   
  If the disk check done in start the computer every time, here is an article that could be useful for:
  Chkdsk.exe or Autochk.exe starts when you try to shut down or restart your computer

• I can't get my internet to open using my wireless connection, what should I check for?

  I can't get my internet to open using my wireless connection, what should I check for?

  Hi RosaSchiroo,

  1. are you able to access internet via wired connection?

  2. have you done any hardware changes or software on your computer before this problem?

  3. you receive an error message or code?

  You can follow this link and check if the problem persists.

  In the Windows wireless network connection problems

  Hope the helps of information.
  Please post back and we do know.

• "Your drive should be checked for consistency.

  Hello

  I was wondering if you could help us?  I am running Vista on a Dell laptop and recently have been receiveing "your drive should be checked for consistency" at the start - it, then crosses the chkdsk to BACK process.  It goes through the process very well, deleting some files and move others. However, once I have connected to Windows, my laptop does work for a few minutes before freezing completely upwards. I thought it was just streaming elements that aggravate freeze it, but it seems to freeze no matter what I do.  I continue to have force a switch to stop/off that I can't even restart.

  Its been my computer completely unusable - is there something I can do to solve this problem, apart from buying a new one?

  Thank you!

  Katie

  Thanks - how could I do?  Is this a hardware problem?

  Sounds like it... You said, "it goes through the process very well, deleting some files and moving others." which tells CHKDSK is to find questions and tries to compensate for them.  However, who can only go so far and if there are internal physical damage on the disc itself (disk drive I guess - not an SSD) then the damage could extend.  Sooner or later, you might get to a point where you don't even have the option to boot.

  What your backups?

  You can find the manufacturer of the hard drive itself and get their diagnostic utilities and test the drive entirely with those.  That will tell you if you have real bad sectors and like it or whether a zero and writing with their utility and the new installation of the operating system could help.  It is more likely that it is a pity however.

• get one of your drive should be checked for consistency

  I have windows 7. Yesterday windows live essentails updated on my computer. I went out and went - there was a brief break and my computer was not shut down cleanly. When I restarted the... one of your drives should be checked for consistency c drive came. I pass through and every time it gets stuck at halfway through step 2 and don't cross. I have to turn off the computer to the power source.

  Maybe it helps

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/a7d5c759-c8c6-49cc-80af-589e28f13a65/

  Or

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html (method 2)

• Where exachk reads the list of Storage nodes that should be checked?

  Automatic exachk is trying to verify a storage node that is closed. Where exachk reads the list of Storage nodes that should be checked?

  He finds :-) /etc/oracle/cell/network-config/cellip.ora

• MessageRadioButton should be checked by default

  Hi all
  
  "We have a requirement where we have 2 MessageRadioButtonas Yes and no." no "should be checked by default when the page loads. What size I should change or can I do it using MessageRadioButtonBean?
  
  Kind regards
  Hey

  Hi Kamal,
  Can you please try the following...

  OAMessageRadioButtonBean radioBean1 = (OAMessageRadioButtonBean) webBean.findChildRecursive("RadioBean1");
  radioBean1.setSelected (true);

  Moreover, even in the previous approach.
  You said... 'Response1' is attribute of view. The two messageRadiobuttons have same view attribute...

  I guess you must have different point of view attribute to command different radio button.

  Kind regards.

• Should I check republish it?

  I ' ve been publish my project to the network every night and have not used any delimited compilation conditional tags yet. When, finally, I do should I check the box republish everything? The reason I ask is because I wonder what happens to all the files that had previously been published in the network folder. I hope I'm making sense.

  The publication takes the files that have been changed (most recent timestamp) and their copy in the destination folder (in this case, your network folder).

  Apply conditional tags to topics (at the level of the subject or the content) is a change for subjects, and publish without republish it all option must copy the changed files in the network folder. The (latest) copied files replace files with the same name in the network folder.

  Any files that you do not change will not be crushed on the network unless you "republish all."

  -Ben

• What type of card PCI USB should I get for a PowerMac G3 1997?

  I have a 1997 beige PowerMac G3, running system 9.2... I bought a USB PCI card to the computer, because it has not taken USB, but the operating system supports the. The description of the article says ICP should work for G3 G5 PowerMacs, but from what I've heard, it is quite a bit of difference between beige PowerMac G3 of 97 and the blue and white of 99. The eBay listing didn't say anything either, only that the product is supposed to run on a PowerMac G3, which, in all technicality, I.

  So I bought and installed, this is where things went sour. The PowerMac has 3 PCI slots, and before you buy this card, I got a card for mini SCSI in the Central slot, which was actively working. As soon as the first installation of the USB PCI card (and by installing, I mean open the computer and plug on the motherboard), once the computer was back together again, he did that freeze the computer, and it would not start, only to turn and sit with the black screen.

  Now, I had put the card in the slot below the SCSI Mini card and after trying to plug into the slot above the mini SCSI card, which only lead to the same result. So I then took the SCSI mini and put the USB PCI card into the Central slot. This time the computer is power up, but does not recognize my flash drive when plugged into the new USB card. I tried a USB and optical laser mouse light up, but the computer has not responded. And audit under the system of Apple, I noticed the card USB PCI did not appear in the material, while the SCSI card mini had done before.

  I think that the computer with a PCI card in a location any of freezing in the Middle may be a quirk of this old computer, but I don't think that I use the bad PCI card for the machine, and I don't want to shoot trouble more as taking the computer outside whenever it freezes become tedious.

  If someone could shed some light on this situation and direct me in the right direction to find something to put USB on my PowerMac, that would be greatly appreciated.

  Thank you

  Aidyn

  What company manufactured the chip USB controller on the card (not the brand of card)?  You may need to take off a sticker to read the name.  Is it VIA or Opti?  These maps have been problematic for the beige G3s and could cause the gel.  I have had success with a card from IOGEAR USB 2.0 2-port in my fleet of beige G3s, which I attribute to them have a controller NEC chip.