What services should be checked in the system config? All are now checked.

Similar Questions

• Cannot install on XP Pro SP3: "Service Pack 3 Setup error - the system cannot find the file specified."

  I am trying to install SP3 on my XP Pro.  I get a notice on my screen, stating: "Service Pack 3 Setup error - the system cannot find the file specified."  Don't know what I'd do.  Thank you.  Peter glass

  That's good news. I think you also need to analyze of rootkits being on the right side. So, now:

  Search for rootkits with a program SPECIALLY designed to detect and remove the (aswMBR):

  http://public.avast.com/~Gmerek/aswMBR.htm

  Download this file to your desktop. Double-click the icon to run the program. When the opportunity to download and install the latest Avast definitions do.

  Run a scan. Results in red indicate that this was not a false positive! Do you need to remove the rootkit (including "FixMBR" if necessary).

  And finally, leave your PC on overnight and search for viruses, using this site:
  http://www.eset.com/us/online-scanner/
  Once we are convinced that your PC is clean, here are my instructions (just in case where you still cannot run batch of Geek-Tech file, etc.):

  1. download the installation of SP3 and IE8 (beforehand) files. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links for the installation files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  (You need to install IE8 AFTER SP3! Trust in me.)

  IMPORTANT NOTE!

  It is VERY important to ensure that Internet Explorer is at the level IE6 before installing SP3. In case you have IE7 or IE8, you must uninstall it / them, using the Control Panel Add / Remove programs. Let us know if you need assistance with this.

  Once again:

  Make sure that IE is IE6 level before installing SP3. You can go directly from IE6 to IE8 after SP3 has been installed.

  2. disconnect Internet. Also unplug all unnecessary devices.

  3. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  4 set up a clean boot. The last thing you need is for a program that runs in the background to interfere with these updates! (It happens!) For more information:

  http://support.Microsoft.com/kb/310353

  (Note that this is the same as setting up a "Diagnostic boot.")

  Reset.

  5 install the SP3. Restart TWICE.

  6 switch to IE8. Restart TWICE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  7 unscrew the clean boot. (That is, return to the Normal startup).

  8 make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  9 visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  10 re - enable automatic updates.

• What burning CDs in Windows Media music system prepares all the files listed.

  What burning CDs in Windows Media music system prepares all the files listed.  When the system starts writing the files on the disc it gets through about 4 songs and then goes to finalize the disc and ejects the disc.  The disk does not appear to have anything on it.  Can I do anything locally to solve the problem?

  My system is XP.

  I burned the disc a lot in the past

  There has been no major changes to the system

  The files I am to burn to the disc are previously ripped files on the disk hard, some of them were burned on another drive before.

  I tried to slow down the burn speed, but that did not work.

  CD burning problem

  Hello

  • You receive an error message when burning CDs?
  • What were the changes made before the issue started?
  To resolve this problem, do one or more of the following and then try again:

  a. Verify that the CD burner is properly connected.

  b. clean the disc and verify that it is not damaged.

  c. try a different brand of blank discs.

  d. If another program is currently burning files on the CD, wait until the burning process is completed.

  e. Quit other programs that may be using the CD burner.

  f. restart Windows Media Player.

  g. restart your computer.

  h. use the Windows error-checking tool to find system errors of files with bad sectors on your hard drive. For more information about the error-checking tool, see Windows Help and Support.

  You can check: http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5145&id=C00D10DA&contextid=30&originalid=C00D0019

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to download the trial and the system says "you are using an operating system that is no longer compatible with Photoshop. See system requirements for a complete list of the supported platforms. What can I do?

  Hi, I am looking to download the trial and the system says "you are using an operating system that is no longer compatible with Photoshop. See system requirements for a complete list of the supported platforms. What can I do?

  My laptop is a MAC Pro

  Well, what IS your version of operating system?

  MINIMUM requirements for programs of cloud... scroll down and check each program

  -http://helpx.adobe.com/creative-cloud/system-requirements.html

• My pc is slow to start. What programs should be included at the start?

  My pc is slow to start.  The analyzation said: "several programs at startup.  Question: there are so many programs listed to start at the beginning, I don't know which ones is essential and those that are not.  Can you help me with this?

  Original title: what programs should be included at the start?

  To improve the performance of your PC to run this tool:

  http://support.Microsoft.com/mats/slow_windows_performance/

  It will ask you to stop the startup program, you should NOT disable anti-virus and security software and you may disable those that you don't use regularly might be messanger or other software.

  Do defragnment and disk cleanup

• The system cannot open session now because the domain is not available

  Hello

  I met the problem of windows cannot open a session after I installed the MicrosoftFixit50588.msi.

  I need to turn on the CredSSP and download & run the site MicrosoftFixit50588.msi Web [url] http://support.microsoft.com/kb/951608/en-us [url]

  He asks to restart the PC after the installation is complete. After that I restart my pc and I could not log on to windows and get the error message "the system cannot open session now because the domain is not available.

  the user's machine: Winsows XP Pro SP3

  Anyone know how to fix this? I urgent need, thank you.

  Kind regards
  Grace

  Hi Grace,

  1. is the computer connected to a domain?

  2. are you able to boot into office?

  I suggest you follow the link below and check them with the question:

  The system cannot open session now because the domain is not available:

  http://support.Microsoft.com/kb/824302

  I hope this helps.

• Smart phone BlackBerry Smartphones does not meet the system requirements that are needed to support Blackberry App World

  Hello

  I just all new BB Curve 8900 on Vodafone. Its the first BB I've owned and I seem to have a bit of trouble. When I try to download the App World, I get the following error message:

  "Device does not meet the system requirements that are needed to support Blackberry App World"

  How can this be?

  OK then... interesting for Vodafone to push support far... Well, by I guess.

  So I guess that I change their instructions... rather than to remove an installed version of the AppWorld in the way they suggest, I suggest go to:

  Homescreen > Options > Advanced Options > Applications

  See if BB AppWorld is listed as installed. If so, highlight (but do not click) it and then press the BBKey and select Delete. If she wasn't there, then continue on these steps.

  Then do a batt pull reboot:

  With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.

  Then re - activate your THS:

  Homescreen > Options > Advanced Options > host Routing Table > BBKey > sign up now

  Then re - send all the service books:

  http://www.BlackBerry.com/BTSC/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB02830&SLIC...

  Then do another reboot batt-pop.

  Then, get a new link for AppWorld from here:

  http://NA.BlackBerry.com/eng/services/appworld/download.jsp#tab_tab_download

  And re - download and install it.

  I hope it's going to go right. If not, then it could still be useful a call to Vodafone...

  See you soon!

• Best practices for storing the Logs of the system for all newly improved ESXi hosts?

  Hi people,

  What are the options and best practices for the Logs of the system for all newly improved 5.1u1 ESXi hosts?

  Do I need to have the Syslog server or it can be safely ignored?

  Thank you

  Evening,

  Syslog is preferred, but VMware has provided a collector of syslog on the vcenter installation disc can be installed on any windows host or your vcenter. I can't count the number of times where I had guests CMTF or newspapers lost... Fortunately for the syslog which collects up to the accident.  It is not necessary, but it's really a good idea without any real cost since you can use your vcenter host.

  Here is an article on how to install it:

  Set up Syslog ESXi collector | VMware vSphere Blog - VMware Blogs

  Thank you

• the system cannot open session now because the domain d57jz6d1is is not available

  IM computer work for someone elis I get this error (the system cannot open session now because the domain d57jz6d1is is not available) when trying to open a session even in safe mode has the computer versions xp with sp2 on it it is a mistake to real windows or if someone know a work around for help would be appreciated.

  The cached credentials are limited or their expiration, you must connect to the domain to log on or you need to log on with a local account.

  John

• I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through. Now what? I tried to repeat the process about 6 times now!

  I am trying to reinstall vista on another laptop and when I get to the last step (end Installation...) it stops, about 70% of the way through.  Now what? I tried to repeat the process about 6 times now!

  Sorry for the confusion.  I must be useless to English.

  Forget the two laptops.
  I have a problem with a laptop that I tell you all (the Inspiron 1720).
  The disc that I use is labeled as a Windows Vista reinstall disk and provided with the computer when I bought it.  I'm not trying to use it on another computer.

  Reference Dell it is a problem with a process of recovery of Windows and, therefore, a problem of Microsoft.

  See you soon

  Problems with the Dell restore process, contact Dell.
  Dell wrote their recovery process and provided you with this DVD, NOT Microsoft...

  It is their software.

  Ask them for a different recovery DVDs.

  You say that the hard drive has failed.

  He could have more than just tough that failed.
  You can have other hardware issues.

  Hardware issues are beyond the scope of these Forums.

  Good luck with Dell.

  See you soon. Mick Murphy - Microsoft partner

• When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver I can change to take account of my images to be self

  When I'm in split mode, I can't see my pictures.  I think it is due to the fact that the server my images are now only support connections made on TLS version 1.2.  Is there a setting in DreamWeaver, I can change to take account of my images be seen?  Then I see mode live view but not in the edit view.  I use DreamWeaver CS5

  It's normal when you are in mode split with Code and design, while the external use referenced images. There is no setting to fix it.

  As a work around, I normally keep a copy local images in a file of site when working on an html email, then just before the code for the e-mail service hovers over, I'll do a quick search & replace to add the absolute paths for images server copies.

  Live View mode should show images correctly, but editing is not possible in DWCS6 although later versions now have an editor in Live mode.

• What priority should I put in the QOS to work with IP voice service

  I have a new router Cisco RV180W and don't know which priority should I put in the high, medium, low possibility of QOS

  in order to work properly with the Ip voice device.

  The default values are 61, 31 y 10 but in a net with 12 PCs

  I think that this configuration 61 voice Ip and only 31 to the rest of the net

  is a value that is too low. This is definition 2 VLANs.

  How I can well criteria to configure these values of priorities?

  In the previous (a WR210 of Cisco router), the only thing that was

  set up which was the Ip voice connected in Lan 2 Port number with a high priority.

  I'm stuck with this matter and it should resolve quickly

  Thank you very much

  Daniel Di Matteo

  Hi Daniel, the claim of LAN should not affect the performance of the internet. All that is on the local interconnection, make queries on the local network will not use an internet connection. So as long as your servers/computers/cameras, etc. are using Cat6 cable and are all active GigE products, it will not be a large part of the review.

  But for your connection internet, you may be correct. 4/1 connection is not much.

  I need you to understand however, the WAN QoS for download speed only. Is not for download speed.

  You can make the profile works in 2 ways. You can keep the amount of download speed to a device or you can ensure that a device does not take more than he should.

  To set up a WAN profile correctly-

  QoS-> WAN QoS profiles

  Choose the maximum flow

  Specify your bandwidth

  Save

  Back to WAN QoS profiles, at the bottom there is a WAN QoS profile table, click Add. In the drop-down list, select the priority. Set the minimum and maximum bandwidth, and then click Save.

  Then you have to bound the profiles for the traffic selector. Go to QoS-> binding profile

  There is a service drop down choose which desired protocol

  Then choose the QOS profile you had a precedent set

  The last part, choose the IP address you want to assign.

  You can do this individually or in sequence. If you choose to be forbidden to use a device too download so that the beginning and the IP is the same. Conversely, if you have a range of devices, you can use their IP ranges if they are consecutive.

  Apply the profile, restart the router.

  I hope that I wrote this clearly for you.

  -Tom
  Please mark replied messages useful

• Windows Installer service is stopped 3 error "the system does not have the specified path.

  Original title: Windows Installer Service is stopped

  When I try to start the windows service install, I get: Windows could not start the Windows Installer Service on local computer.
  Misconception # 3 "the system does not have the specified path.

  Hello

  Try the methods below and check if the problem persists.

  Method 1:

  I suggest that you follow the steps under the heading Windows Installer issues in the link below to fix the problem.

  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer

  http://support.Microsoft.com/kb/2438651#reso1

  Method 2:

  You can also try running a Scan SFC (System File Checker):
  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC /scannnow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

   

• Windows search service couldn't start. The system does not have the specified path. How can I fix it?

  I'm having a problem where IE takes up to five minutes for a web page.   I see the mistake of follow up in the event viewer:

  Log name: System
  Source: Service Control Manager
  Date: 14/08/2012 21:14:10
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Owner-PC

  Description:
  The research service Windows could not start because of the following error:
  The system does not have the specified path.

  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event ">"
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      391647
     
     
      System
      Owner-PC
     
   
   
      Windows Search
      %%d Ko
   
  

  When I run the program Microsoft FixIt Center I get 3 error messages that do not reach the difficulty.

  ---------------------------------------------------------------------------------------------------------

  (1) Windows Search is crashing or not fixed failing

  Windows Search crashes or breaks down after that that she has started.  In addition, an event ID 7042, 100 or 1000 is logged in the Windows event log, or the Windows Search Service is not running.

  (2) search Windows does not start and gives an error message no fixed

  Windows Search does not search results show and there is an error at startup.  A 3024 or event ID 1006 is logged in the Windows event log, or the Windows Search Service is not running.

  (3) Windows search shows no results not fixed

  Windows Search shows no results.  In addition, an event ID 7040 is logged in the Windows event log, or the Windows Search service is not running.

  ---------------------------------------------------------------------------------------------------------

  Someone at - it solutions?  Oh, I'm running Vista 32 Home SP2

  Thank you

  Hello

  Did you change to the computer?

  I suggest you to see the links and check.

  The problems with the search

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-searching

  Improve Windows searches using the index: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/improve-Windows-searches-using-the-index-frequently-asked-questions

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-your-computers-performance