PCOIP fails, but RDP works
New installation * and very green at VMWare View!
I have my default protocol PCOIP and for some reason any RDP is the Protocol that I find myself using the value. I don't know that I have something configured miss. Any help would be good.
Try with the workaround and a vm solution, check the driver version.
customers of r which are affected by the problem and wish to continue using PCoIP, use this workaround:
Log in the virtual machine (s) affected with administrator rights. It is a virtual machine that has shipped with ESX 4.0 Update 2 installed VMware tools.
Rename the folder C:\Program File\Common Files\VMware\Drivers\Video to C:\Program File\Common Files\VMware\Drivers\Video CENTENARIANS.
A virtual machine to work, copy the folder C:\Program File\Common Files\Vmware\Drivers\Video in C:\Program File\Common Files\Vmware\Drivers\ on a VM affected.
Click Start > settings > Control Panel > system.
Click the Hardware tab, and then click Device Manager.
Expand display adapters.
Choose VMWARE SVGA II. Right-click on it and choose Properties.
Click the driver tab. You are presented with the SVGA driver properties.
The version is 11.6.0.34 (Driver Date 03/01/2010).
Click on update driver. The Hardware Update Wizard displays.
When you are asked the question, "Windows connect to Windows Update to search for software?", click on no, not at this time and click Next.
When you are prompted with the question, "want you want the wizard to do", click on install from a list or specific location (Advanced) and click Next.
Click on do not search. I will choose the driver to install and click Next.
On the next screen, you are presented a list of two or more VMWARE SVGA II Versions to choice. For example:
The VMWARE SVGA II Version: 11.6.0.31 (21/09/2009)
The VMWARE SVGA II Version: 11.6.0.32 (24/09/2009)
The VMWARE SVGA II Version: 11.6.0.34 (03/01/2010)
Choose a version older than VMWARE SVGA II Version: 11.6.0.34 (03/01/2010).
In this example, you could choose either VMWARE SVGA II Version: 11.6.0.31 (21/09/2009) or VMWARE SVGA II Version: 11.6.0.32 (24/09/2009).
Click Next. The driver begins to install.
When Windows notifies you that VMware SVGA II has failed the Windows logo test, click on continue.
The driver installation is complete.
Click Finish.
Click YES when you are prompted to restart your computer.
Verify that PCoIP now works.
Por don't favor no olvides calificar las responses that you were should o ayuda valiosos.
Please, do not forget the points of call of the "useful" or "correct" answers
Best wishes / Saludos
________________________________________
ING. Diego Quintana
VCP 410 - VCP 310 - VAC - VTSP
Join the Virtualizacion en Español group in LinkedIn
! http://feeds.feedburner.com/WetcomGroup.1.gif!
Tags: VMware
Similar Questions
-
View 5.0 upgrade cannot connect through security on PCOIP server but RDP works very well
We have improved the sight of 4.6 to 5 and we are no longer able to connect through pcoip via security server. When you connect remotely if you select rdp everything works fine, but pcoip goes to a black screen and then return and error message of 'the connection to the remote computer is done '. Everything worked well in 4.6 before the upgrade and no settings have been changed. Any help would be greatly appreciated... Thank you
Just had this problem, same solution, external IP had changed its internal IP DMZ, it switched back - totally fixed.
-
Deployment of the IOM has failed but OIM_Server1 works fine
Hello
When I start the server admin it shows oim_server running. But when I click on it and see the deployment, it does evidence application IOM (11.1.1.3.0) failed. I try check it out but not succeeded. I check my db connection is fine. I reinstall but once again even.
The error light is when I run the console of the IOM on (localhost:14000 / IOM) it gives me error 404 not found.
Error 404 - not found
RFC 2068 Hypertext Transfer Protocol--HTTP / 1.1:
10.4.5 404 not found
Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
any help would be appreciated.pleaseHello
Open the weblogic administration console, go to server and click on IOM server and then click deployments and see the State of all things confirm in return.
Kind regards
kK -
PCoIP works on a subnet, but only RDP works on another?
Hi all
I Don t know why what is happening, but if someone can help, I'd appreciate it.
My set-up:
Subnet A have: ESX Server, VCenter Server, login server VMview (with 2 network cards, connected to subnet A, NIC1 NIC2 the subnet B - there is no communication between subnets A & B), a model for subnet A DHCP Server clients
Subnet B has: DHCP server, model for clients on the subnet B (with the entrance of host file for 2 NETWORK card on the login server VMview).
Created 2 pools, PoolA uses a model with a card NETWORK connected to the subnet, PoolB uses a model with a NETWORK adapter connected to subnet B.
Test user has permissions to use the pools.
With the help of test user on a physical client computer in the subnet A:
PoolA connection, I can connect to VMview PCoIP with customers very well.
Connect to PoolB, when I connect using PCoIP it seems to connect but then "crashes" to a black screen. I can minimize the black screen and maximize again but it doesn´t change. Also the screen does not disappear after 5 seconds (as I read in other configurations).
If I change the RDP Protocol, however, I can connect to PoolB very well and without problems.
I tried to look an article that was recommended on these forums with a list of things to check if you see the black screen, but everything seems to be configured correctly.
Does anyone have any ideas as to what could be the cause?
Is it (as I think) something related to the fact that subnets Don t get a communication between them?
I have tried yet, haven´t as I am new off-site, but do you think that this behavior will not occur for PoolB if I connect with a physical client directly connected to the subnet B (using the IP address for the connection to the server of NIC2 on the login server)?
Any ideas?
Thank you
Mark
If you are using the connection as a bridge server, which NIC has the default gateway? I am I think you may need to add static routes on the login server. It is most likley that the problem is with UDP, which would explain why RDP works.
-
VMware View - RDP works, PCoIP mit error
HI Leute
ICH habe bei meiner VMware View Architektur das problem, dass ich beim Verbinden uber den View Client nur das Protokoll RDP use kann. DAS will work wunderbar. As soon as ich aber das PCoIP Protokoll auswahle, kommt also Fehlermeldung beim Verbinden:
Dieser Office steht zurzeit nicht available. Try later Rubis, eine connection Sie mit diesem herzustellen office, oder wenden Sie sich an your Systemadministrator.
ICH use VMware View 4.6, mit zugehorigem vCenter Server und connection to the server. Alles ist auf dem could Stand. Am is nicht mit einem Security Server. Lafut're too im trainee alles Moment.
Die virtuellen Maschinen, die ich mich verbinden laufen auf mit Win 7 x 64
Hat eine idea, wo yesterday someone das problem konnte liegen? Habe ich vergessen oder please konfiguriert something?
ICH würde mich freuen, wenn einen Losungsansatz had someone.
Grüße
Bopa
OK, so I ran it through a translator and got the below.
People in the back, I have the problem with my VMware View architecture that I can use the minutes RDP with the connection by the Client to view only. Will work wonderfully. As soon as I select the PCoIP minutes however, the following error message is delivered with connection: this office is not available at the present time. Try again later connection with this desktop computer or contact your system administrator. I use VMware View 4.6 with partner vCenter server and connecting to the server. Everything is on the latest terms. I'm not however with a security server. It lafut so for now everything in-house. Virtual machines, on which I connect run me with Win 7 x 64 does anyone have an idea, the problem could lie where here? A I forgot something or configured incorrectly? I would be happy, if someone had a solution. GreetingsSo, it sounds like RDP works but you are having problems with PCOIP and everything is internal. Have you checked that PCOIP is not blocked by any firewall? It uses the port 4172 so make sure that you unlock that. Also is this a problem with this particular machine or all of your machines?
-
All downloads are indicated as having failed but are still online.
Whenever I have download a file and go to Downloads it shows the file failed, but the Firefox icon displays a download progress bar and the file will end if left alone. The real problem I encounter is that I have no idea how fast that downloads a file and I can't estimate when it will be finished.
I'm tempted to reinstall Firefox and disabling all add-ons, but none of these worked.
Thanks in advance.
Thanks, I think that's the theme I was using. It was actually both, in the toolbar and in the downloads folder.
-
My iphone 6 s screen has totally blacked out, but siri works. What is its cause?
My iphone 6 s screen has totally blacked out, but siri works. What is its cause?
Press the sleep/wake and home buttons and keep them for at least 10 seconds.
If this is not enough, take a look at these articles Support from Apple:
If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support
Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.
As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.
More info here:https://support.apple.com/en-us/HT201263
If these steps do not work, contact Apple and ask for help.
-
Sent items from MS outlook do not appear in Thunderbird, but it works in the reverse (envoys since Thunderbird appears in Outlook). How to solve this problem?
I guess you have a pre existing account using the POP Protocol, that not only downloads the contents of the Inbox.
Hotmail, Live, MSN, Outlook dot com now support IMAP which is a synchronized messaging service, changes in one are reflected in the other.
File menu (alt + F) > New > existing e-mail account and add your account to the Thunderbird again. Make sure you have "account type selected IMAP and your all synchronized will.
If it's like my account, your IMAP e-mail account will come with a subfolder under the pop called deleted folder that contains all mail I have downloaded in the past years.
If you right-click your \new IMAP account in the folders pane on the right immediately after you create it and choose to subscribe you can unsubscribe from this folder if you don't see it
-
I have firefox OS x 19 and silverlight 5.1 but firefox doesn't recognize, but silverlight works fine in safari what else can I do?
OK, not really sure what I did, in addition to dumping firefox and silverlight on my hard drive and reinstalling everything, but its not working.
-
Touch I D is does not work (but it worked until 3 days ago)... iOS 8 bug...? Solution available?
Try a simple Reset: hold down the Home and Power buttons until you see the Apple logo (15 to 20 seconds).
If this does not help, you may need to restore your iPhone.
BTW, say you iOS 8, but your footer says iOS 9.3.1
-
A Web site will work on Mozilla or Explorer... but it works for friends
For the last 3 days, I was not able to get this Web site, or with Mozilla or Internet Explorer. All other sites work very well as usual. I can't connect to this Web site on another computer in the House either. But it works very well for friends. I deleted the cache and cookies. My COMPUTER knowledge is limited and I don't know what more to do. This is the message that I get up when I try to go to this site:
The server at www.bookcrossing.com is taking too long to respond.
The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
Any ideas?
Thanks for your help! Since posting here, I managed to get in touch with the technical support of the site as well. I was happy to discover that it wasn't just me - it was a problem at their end that seemed to block a few users (although no one I knew!). Touch wood, it seems to work now.
-
I can't use the link 'Check the seats' on the website of Delta Airlines when I use Firefox, but Safari works fine. I get the message "not available at this time" when you use Firefox, but when I go on Safari it works just fine. I love Firefox but it sucks!
This problem may be caused by corrupted cookies.
Clear the cache and cookies from sites that cause problems.
"Clear the Cache":
- Firefox > Preferences > advanced > network > storage (Cache) offline: 'clear now '.
'Delete Cookies' sites causing problems:
- Firefox > Preferences > privacy > Cookies: "show the Cookies".
-
Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?
Try Firefox SafeMode to see how it works there.
A way of solving problems, which disables most of the modules.
(If you use it, switch to the default theme).- You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
- Or use the Help menu option, click restart with the disabled... modules while Firefox is running.
Do not choose anything at the moment, just use 'continue in safe mode.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.
If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.
http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themesCan be caused by an add-on to the AVG.
When find you what is causing that, please let us know. It might help others who have this problem.
-
The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube. This happens when I use Safari, Firefox and Chrome. Yet if I'm in Safe Boot mode it works fine. I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked. I'm not very computer savvy either so don't know much of what I do with this technical stuff. I emptied the caches, but that did not work. Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test. I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below. Help, please!
The system version: OS X 10.11.1 (B 15, 42)
Kernel version: Darwin 15.0.0
Boot Mode: Normal
Model: MacBookPro11, 1
FileVault: on
The System Diagnostics
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
2016-04-13 desmoides crash
Diagnosis of the user
2016-04-12 AssetCacheLocatorService crash
Accident of GarageBand 2016-04-12
Kernel messages
Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019
Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level
Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit
Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052
12 apr 17:20:51 0xe00002db questioned the file opening error
-the last message repeated 1 time.
Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066
Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level
Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit
Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765
Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN
Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.
Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476
Apr 12 21:54:58 opening error 0xe00002db questioned the file
-the last message repeated 3 times.
Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988
Hi AussieEgypt,
Thank you for using communities Support from Apple.
If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac. Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:
Test your login items
Choose the Apple menu > System Preferences, and then click users and groups.
Click on your account under the current user name, and then click connection points.
Make a list of the login items, you will need to remember later.
Select all the elements of connection, and then click the button Delete .
Choose the Apple menu > restart.
If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.
If the problem persists, follow the steps above to remove only the last element of connection that you added.
OS X El Capitan: If you think you have incompatible connection points
See you soon.
-
I can't open the images in Yahoo mail with 7 Firefox, but IE works.
After several years of success with Yahoo mail and Firefox, I can longer open mail of Yahoo (jpg, bmp) images. I can open them in gmail with Firefox or IE. I can open them in Yahoo mail using IE. I am running Firefox 7.0.1 and I think, but am not sure, all my trouble started after the update to this version of Firefox.
RESOLVED: Here is the solution to "I can't open the images in Yahoo mail with 7 Firefox, but IE works." Just before I log on my E-mail Yahoo site I turn on cookies, but I never enable third-party cookies. That has always worked very well until October 2011. Just after I installed the new Firefox 7 this problem started. Now I just found out that the problem is solved, if I enable cookies from third party. Users should not have to enable cookies from third party read the Yahoo mail via Firefox!
Maybe you are looking for
-
Bay of cluster fails to initialize constantly
I have a program where I have a table of cluster that enters a while loop like a shift register, and then is then indexed in a loop for to act on each item individually. To do this, the Bay of cluster must be initialized before the while loop, other
-
How to recover programs that are lost after using the software Ccleaner.
I have a Windows Vista Home Premium computer laptop, before I used the Cclearner I was playing Spider Solitaire, now it has been taken fromand I don't know how to get it back.I tried every way I can think of, but nothing works, can you help me please
-
Help, please! How I have ubuntu unsunstall and reinstall windows?
I bought a used computer, that I love, but I need to uninstall ubuntu and install windows? I have recovery disks. Thank you for your help. I hate ubuntu!
-
How change the password if I don't remember my original password?
How change the password if I don't remember my original password
-
My screen keeps on growing like.
I tried to find instructions in the Control Panel, but there was nothing to help this situation. I used to have a 'zoom' down button on the right, but he disappeared. I know it's a small problem, but it's very aggravating!