PDF Conversion files do not install with 3rd party software.

Similar Questions

• 10.11.3 mission Control "Show Desktop" does not work with 3rd party keyboard

  I use a KENIMBENI Multi sync Bluetooth keyboard as seems to be the best solution when you want a wireless keyboard with a numeric keypad on a Mac.

  The KENIMBENI keyboard has its own combination of keys rather than Apple-command 'Mission Control' 'Show desktop '. It was working fine until 10.11.2. But now, after upgrading to 10.11.3, I find no way to make this button (or any other combination of the command 'Show desktop') works. Some key or combination of keys I enter the keyboard and/or the Mission Control preferences pane, will be shown on the screen, but the system does not react to it. I also tried switching to use several spaces to use a single space extending on my two monitors, assuming that it could have to do with behavior change - but none of this helps.

  I have an another Mac Apple original wired keyboard, and here the command-'Mission Control' combo works fine as expected.

  Can any that confirm - and perhaps know no work around? I'm a little old school management Finder and file and so use orders 'Show desktop' several times a day. Thanks in advance for your suggestions!

  You should discuss with the developer of the material. If it works for your OS with material Mac the fault lies with the proponent to provide a usable instance of this device with a newer OS, if they wish. In addition, we use a Logitech wireless keyboard solution full size and they are solar powered so no battery and no problems so far.

  http://www.KANEX.com/contact/TechSupport

• When installing CD collection national geographic Gets the error, "the version of this file is not compatible with the version of Windows that you are using".

  Original title: the version of this file is not compatible with the version of Windows you are using. Check your computer system information to see if you need a X 86 (32-bit) or X 64 (64-bit) version of the program, and then contact the software publisher.

  I have a large CD collection published by National Geographic. The difficulty lies in the installation of the program that displays the pages. Setup of the program ends. ins.  These Photo CD were produced by mindscape. When you try to contact them, they are based in France, and it is impossible to get support for this product. Is it possible to get the installer on the CD to do its job to provide a way to turn the 'pages '?

  Hello malaglinskom,

  In addition to what Azam offered, you may try the following:

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  Hope this information helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error - file does not begin with '% PDF -'.

  Hi all

  I am getting an error for all my reports 11G BI Publisher saying PDF file does not begin with ' %PDF-'Local\EWHj-

  Where I'm able to see the data in HTML, Excel show etc...

  All these reports are works fine until last Thursday and no change was made to the models. I saved the sample data in the data model and associated with report BEEP again, but still no luck.

  When I tried opening in the generator of Template for troubleshooting it shows error below saying Preview failed.

  Template:\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tmp\tmp.RTF

  SetLocale RTFProcessor: en - us

  SetData FOProcessor: Oracle\BIPublisher\TemplateBuilderforWord\tmp\0\download_data.xml

  SetLocale FOProcessor: en - us

  oracle.xdo.template.fo.area.NoAvailableAreaException: not quite render region. Please look in the output file incomplete for cause.

  at oracle.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:854)

  at oracle.xdo.template.fo.elements.FormattingEngine.checkInfiniteLoop(FormattingEngine.java:845)

  at oracle.xdo.template.fo.elements.FormattingEngine.createNewPage(FormattingEngine.java:549)

  at oracle.xdo.template.fo.elements.FormattingEngine.startLayout(FormattingEngine.java:346)

  at oracle.xdo.template.fo.elements.FormattingEngine.run(FormattingEngine.java:143)

  at oracle.xdo.template.fo.FOHandler.endElement(FOHandler.java:752)

  to oracle.xdo.common.xml.XSLTHandler$ EEEntry.sendEvent (XSLTHandler.java:595)

  at oracle.xdo.common.xml.XSLTMerger.startElement(XSLTMerger.java:51)

  at oracle.xdo11g.parser.v2.XMLContentHandler.startElement(XMLContentHandler.java:182)

  at oracle.xdo11g.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1322)

  at oracle.xdo11g.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:366)

  at oracle.xdo11g.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:312)

  at oracle.xdo11g.parser.v2.XMLParser.parse(XMLParser.java:218)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)

  at java.lang.reflect.Method.invoke (unknown Source)

  at oracle.xdo.common.xml.XDOSAXParser.invokeParse(XDOSAXParser.java:166)

  at oracle.xdo.common.xml.XDOSAXParser.parse(XDOSAXParser.java:122)

  at oracle.xdo.template.fo.FOProcessingEngine.process(FOProcessingEngine.java:408)

  at oracle.xdo.template.FOProcessor.generate(FOProcessor.java:1231)

  at RTF2PDF2.runRTFto (RTF2PDF2.java:484)

  at RTF2PDF2.runXDO (RTF2PDF2.java:343)

  at RTF2PDF2.main (RTF2PDF2.java:235)

  Please advise on how to fix this ASAP.

  I'm using version: Oracle Business Intelligence 11.1.1.7.141014

  Thanks in advance...

  Concerning

  Olivier

  Thanks, got the fix. The issue is due to disk space on the server - not enough memory.

  Made available space, and now My PDF files work well in BIPublisher.

  Thank you very much..

  Olivier

• File does not begin with '% PDF -'. Error opening PDF files in the browser

  When the user rent a report via internet explorer, it shows "file does not begin with '% PDF -'". I reinstalled acrobat, but it still does not.

  

  Configuration as follows

  Adobe Acrobat Reader X

  Name of the operating system: Microsoft Windows 10

  Browser: Internet Explorer Version: 11.00.10586

  The file you are trying to open is not a (valid) PDF file. Contact the Web site from which you guessed it, and report the problem to them.

• "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program.

  Hello

  I seem to be having problems when you try to install a program on my Windows 7 that allows to launch on my Windows XP and Windows Vista. I used the tool to solve compatibility problems and selected these settings in the CONFIGURATION file, but nothing seems to work the error message I get is as follows:

  "This version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program, and then contact the software publisher. »

  Is it possible to set my computer to allow this program to run successfully? Any solution would be greatly useful.

  Hello Rdforbe,

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  To find out if your computer is running 32-bit Windows or 64-bit, follow these steps:
  System opened by clicking on the button start , by clicking on the Control Panel, click System.
  Under system, you can view the system type. This will describe if you have 32-bit or 64-bit.

  You can also try compatibility mode.

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  Use the following steps:

  (1) right click on the program

  2) click Properties

  3) click on the Compatibility tab

  (4) select run this program in compatibility mode and select Windows Vista or other operating system, the program has been run successfully.

  Check out the link here: make sure to run older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  If you are running Windows 7 Professional or Ultimate version, install Windows Virtual PC and Windows XP mode (http://www.microsoft.com/windows/virtual-pc/default.aspx) and run your software in Windows XP.

  If you run Windows 7 Home Premium, try VirtualBox (www.virtualbox.org) or VMware Player (www.vmware.com), or any other software virtualization part 3^rd and install a separate copy of Windows XP (family or professional edition) for this purpose. You can find the virtualization software free that will run on Windows 7 Home Premium.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CS3 will not install with windows 10

  I can't install CS3 will not install with windows 10 pdf dll file missing

  Use compatibility mode.

• I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  I have uninstall it by accident with Adobe Acrobat PRO DC with third party software.  Now I can't install Adobe and creative cloud does not load apps.  How a fix it?

  Hey bellmarg,

  Please uninstall Adobe CC using this cleanup tool use the Adobe Creative Cloud cleaning tool to solve installation problems, restart your computer & reinstall it using this link Adobe Acrobat Pro DC: PDF Converter, convert PDF files from anywhere.

  Let me know how it goes.

  Kind regards

  Nicos

• Firefox worked, today has not started with the error the version of this file is not compatible with the version of windows you are using.

  Computer is Windows 7 Ultimate 64 bit. Firefox has work fine for over a year on this computer. Nothing has been changed or updated updated except Windows update indicates that it installed updates on August 19. I had computer week before because only out of town, back entrance and began August 18, but Firefox has worked that day. Does not use FF again until today. Today August 22, firefox does not start, shortcut icon changed program not there. Exe in the folder when you click Poster error message says the version of this file is not compatible with the version of Windows, I am running. Exe of Firefox shows created on 20 August. I suspect the update, Windows or FF but lean towards windows, which was spent, who broke things. I noticed that IE 10 updates, updates of .NET framework and the malicious software removal tool have been installed. I tried to restart the computer, has not set. Tried to run as administrator, did not work. I don't want to uninstall FF, at least have to because of all the things I have here, bookmarks, last past passwords, etc..

  Hello

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files (not the profile folder, where the bookmarks are stored) and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• Running game - this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program

  I'm having the same problem that is described in this topic: http://social.answers.microsoft.com/Forums/en-US/vistagaming/thread/f15edea1-f88f-492e-bb42-4db2b06fdf05

  My error message is: "this version of the file is not compatible with the version of Windows you are using. Check your computer's system information to see whether you need a x 86 (32 bit) or an x 64 (64-bit) version of the program and then contact the software publisher. »

  I tried to run the program in question (Castle of the winds) in each mode of compatibility that is on the list and it is giving me this error message every time. Other people have managed to get the program to work, so I don't know, it does not work on Windows 7, but I can't make it work for me.

  Help?

  Hi autohaptic,

  (a) on the computer what Edition\Version of Windows 7 operating system do you use? What type of system? 32-bit or 64-bit

  If you are running Windows 7 64-bit operating system, you can install the 64-bit computer game program.

  (b) on the computer which the castle of the winds game version are you running?

  I want to clarify, if you try to install the program or trying to run.

  Step 1: Put the computer in a clean boot, and then try to run the game

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  You can consider the right version of the game for your computer relocation program.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the installation of Microsoft Flight Simulator 2004, the following error occurs: the version of this file is not compatible with the version of Windows you are using.

  Former title: Microsoft Flight Simulator will not install on Windows 7

  I have Windows 7 Home Premium 64-bit.  I try to install MFS 2004.  The first 3 discs work fine, but when I insert disk 4 to complete the installation, I get the following error message:

  "The version of this file is not compatible with the version of Windows you are using.  Check your computer's system information to see if yo need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I have a Dell Studio 1558

  Intel i5 - 520 M

  ATI Mobility Radeon HD 5470 graphics card

  8 GB RAM DDR3

  What can I do?

  Hello
  
  1. which edition of Windows are you using? Is - this edition is 32-bit or 64-bit?
   
   
  Given that the game is compatible with Windows 7, I suspect that the conflict can be 32-bit or 64-bit architecture.
  The link below shows the compatibility of this game with Windows 7.
  http://www.microsoft.com/windows/compatibility/Windows-7/en-us/Details.aspx?type=Software&p=Microsoft%20Flight%20Simulator%202004%3A%20A%20Century%20of%20Flight&v=Microsoft&uid=&pf=1&pi=3&c=PC%20Gaming&sc=Simulation%20%26%20Driving&os=64-bit
   
   
  Method 1.
  We must ensure that the edition of the game must correspond with the operating system.
  If you use 64-bit in this game, you need the 64-bit Windows to install it.
  Method 2.
  If the above information matching I you recommend to start the computer in clean condition and then try to install the game.
  See the article below for instructions on how to start your computer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Program, managing your money get the version of the file is not compatible with Windows Vista

  I'm trying to run an old program, manage his money, on Vista Home Premium 64 - bit. It ran OK on Win XP. When I try to run the setup.exe, I get error - "the version of this file is not compatible with the version of Windows hou are running." I tried to use the program compatibility Wizard. No help. Same mistake. Anything else I can try?

  If you get this error and the Compatibility Mode doesn't help, then the program simply is not compatible with this version of Vista, and if you want the program, you will need to check with the manufacturer to see if they make a full install version which is compatible with Vista and buy the program more recent.  If they do not have such a version, then I'm afraid you're just out of luck with this program.  The only other option MIGHT be Virtual PC, but even that is not a guarantee and is a little extreme just to get an old program running.

  Sorry if this isn't what you wanted to hear, but it's like that.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HP pavilion. Recently, an "out of memory at line 17" message keeps popping up and - web pages and files DO NOT OPEN, with browsers scrolling forever.

  Original title: out of memory at line 17

  Using Vista system op on an old HP Pavilion of 3 year. Recently, an "out of memory at line 17" message keeps popping up and - web pages and files DO NOT OPEN, with browsers scrolling forever.

  Help, please

  Hi Scott,.
  1. are you using Internet Explorer?
  2. If so, what is the version of Internet Explorer installed on the computer?
  3 are you facing this problem in all Web sites?
   
  I suggest you to follow the link below and check if it helps.
   
   
  Method 1: Follow the link mentioned below and check if it helps.
  How to resolve script errors in Internet Explorer on Windows computers
   
  Method 2: You can also try the steps and check if it helps.
  You may receive an "Out of Memory" error message because of the limitation of in Windows Vista or Windows 7 desktop heap
   
  Reference: that should do about Internet Explorer script errors?
   

• The version of this file is not compatible with the version of windows you are runing problem.

  IM facing problem installing some software: the error message is below to:

  The version of this file is not compatible with the version of windows that you are running, check your computer's system information to see whether you need a x 86 version or x 64 of this program and then contact the software publisher

  

  while trying to change the compatibility to windows 7 option does not appear

  

  Windows 7 will not be included within the compatibility list, because you are already using Windows 7. Your only option is to contact the Publisher of software (the company that built the program) and get a version that works with your computer type (64 bit or 32 bit, whichever one you have).

• Error message: "the version of this file is not compatible with the version of Windows that you are using", when you try to run an old ms - based back program in Win-7 Ultimate 64 bit.

  Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs

  I get this message when you try to run an old MS-DOS - based program in Win-7 Ultimate 64-bit.

  "The version of this file is not compatible with the version of Windows you are using. Check your computer system information to see whether you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. »

  I understand that I am under a 64 bit OS, but is it possible to get this program to run? I was wondering if anyone has tips :)

  Hi Bcopeland,

  Thanks for posting your question in the Microsoft Community.

  Based on the information, you are trying to install and use an old ms - dos program based in Windows-7 Ultimate 64-bit.

  The problem is a software that was created for Windows 95, 98, and Windows XP has no way to work correctly with an operating system that didn't even exist when the software was written. However, the error message you get normally means that you have a 32-bit software that you are trying to install on a 64-bit system.

  You can check the compatibility of the program with Windows 7, in the Compatibility Center.

  Compatibility Center

  If the program is not compatible, then you try to install and run the program in compatibility mode.

  a. click right on the program.

  b. click Properties.

  c. click on the tab compatibility.

  d. Select run this program in compatibility mode and select Windows Vista or whatever to use the system, the program was executed successfully.

  Here is an article that gives you more information on this:

  Make older programs in this version of Windows

  If the problem persists, you can get in touch with the software vendor to see for the latest version of the program to use the same system of 64-bit Windows 7.

  Hope the helps of information.

  If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.