PdfAppend Diadem

Similar Questions

• Export Excel in DIAdem 15

  Hello

  I use 15 DIAdem and trying to export values in the data portal to a XLS (Excel) file.

  I tried to look for similar tasks a previously in this forum and found a few directions.

  (1) ExcelExport function - appears to be eliminated in the recent version of DIAdem,

  (2) extension IPM: gfsexcel (?). DLL - also absent in my files DIAdem

  (3) export TDM/CSV using instead...

  ((3) seems to be possible, from now, but it would be great if I can use Excel export directly (as 3) needs a few extra clicks..)

  In detail, I want to export values in my data portal (not much data; 1 rank & max. 20 columns) for the excel file, and it would be better if exported excel file opens automatically (I assume that this was possible with the function ExcelExport before).

  If there is no idea, please let me know.

  Thanks in advance,

  Young.

  If you want to try the CSV export, it is possible to configure it to match your local excel import.

  If it responds, it automatically loads to Excel.

  Option Explicit
  
  Call DataFileSave (CsvParameters ("C:\temp\out_ger.csv", "ger"), "CSV")
  
  Call DataFileSave (CsvParameters ("C:\temp\out_eng.csv", "eng"), "CSV")
  function CsvParameters (byval filePath, byVal lang)
  
    Select the lang case
  
      case "ger".
  
        "CsvParameters =""& replace (filePath," & ","&") &",  JJ. "Mr. YYYY HH: mm:"
  
      case "eng".
  
        "CsvParameters =""& replace (filePath," & ","&") &". , " MM/DD/YYYY HH: mm: pp.
  
      other cases
  
        CsvParameters = filePath
  
    select end
  
  EndFunction

  Classically, there are three things that you have to adapt to the local context

  • decimal point
  
  
  • seperator
  
  
  • TimeFormat

• What is DIAdem?

  Someone could expain to me what tiara? I am a user of Labview, and I use it not only for the acquisition of data, but also for the analysis of the data.

  We have a Campus license, order to Diadem is included, but I don't know if it is the effort to examine it or not worthing. So, please, could someone explain to me what can do Diadem and impossible Labview?

  Thank you

  Hello gnappo,

  It's a good question, and I'll try to give a brief answer.

  Tiara is an application of post processing and data communication (you can also write custom in LabVIEW code for). I'll try to make an analogy with the ecosystem of Microsoft here. LabVIEW is a tool of programming (such as Visual Studio in the world of Microsoft), and the tiara is an application (we will compare to Excel in the world of Microsoft).

  You can certainly schedule a specific analysis and reporting processes well in LabVIEW, but anything that requires that greater flexibility is better served by DIAdem.

  Among the highlights of DIAdem for me are:

  1. DataPlugins - ability to load data from more than 500 files formats directly in DIAdem without the need to create custom players, including Excel and ASCII files using wizards
  
  
  2. DataFInder - creates an automatic index of all the files and their metadata that can instantly be searched from the research free text or keyword
  
  
  3. Easily load data from multiple files for comparison in a set of data online (data portal), including subsets of data (individual signals or groups) according to specific conditions
  
  
  4. Interactive control of data using the sliders, with the ability to synchronize the video, GPS signals and other sources of data in an easy to use interface
  
  
  5. A comprehensive mathematical analysis of the curve fits the statistics and analysis of signals - more libraries Extensible forms and automatic unit conversion
  
  
  6. Creating multi-page graphics, dynamic and reusable report templates including 2D, 3D graphics and tables, polar plots, and images inline and variable
  
  
  7. Automation thanks to recorders macro, with the possibility to expand the macros into VBScript, create custom menus, bars of tool and icon, dialogues and all user interfaces

  These are a few things that come to mind - you can visit the page DIAdem here on ni.com (http://www.ni.com/diadem/) for more details, or call your local office of OR and ask for a personalized presentation of DIAdem.

  Let me know if you have any additional questions,

  Otmar

• How can I pass data between DIAdem and LabVIEW?

  Hello community,

  in fact I use a LabVIEW application to control a test system, collect data and store it in a file.

  DIAdem is executed (using ITOCommand) and then create a report (PDF).

  This works already.

  But also, I would like to receive a return value of tiara, a real number, as for example the register R1.

  No idea how can be achieved?

  Thank you!

  Espelkamper

  Declare records, variables in the script of tiara that store the calculated result. Read records in labview

• Report of the Diadem display modes

  I created TDMS files in LabVIEW with a chain in time.  I know that the time channel is UTC because I said it when I read my timing card time (6682).  In DIAdem Windows seems to substitute time and display according to the time zone setting.  How can I avoid this without creating a new channel of time in tiara and giving it a UTC fudge factor?

  I was afraid of this

• Cannot acquire with cDAQ in hardware mode timed using DIAdem DAC

  Hi all

  I use DIAdem DAC to acquire the cDAQ + 9225 + 9219. 9219 acquires the use of single point mode that works very well. However, I tried to acquire waveforms 50 kHz 9225 with the file attached dac. However, I found a problem on the block of the clock, as shown below.

  

  How could I solve this problem and gain the waveform with 9225 using DIAdem DAC?

  Sincerely, Kate

  Hello Kate,

  You must connect the NIDAQ-In1 exit the Save block block. In addition, you must change the parameters of the horloge1 block. The material is always measured in mode "DAC-kernel". "The software clock" is used for frequencies of up to 10 kHz clock (depending on the material and the PC). If you want to measure more quickly, you can use the "Clock" mode

  Greetings

  Walter

• DIAdem 11 Setup error: object required: navigator, display.currdataProvider

  On the Diadem 11.0 installation, I get a popup error message when I open the program first (and subsequent) time and the browser, view tab is corrupt:

  

  Object required: ' navigator, display.currdataProvider.

  Also when the program is first opened after installation, a message appears warning about mistakes during installation and to check the log file but I can't.

  I use windows vista 64 bit.

  Thank you, Steve.

  Hi Steve,.

  Thanks for the screenshots reposte - they gave R & D a better understanding of what's going on.  They now believe that the tiara installs fine and that the problem is a mismatch the launch between DIAdem and a Windows hotfix.  We see normally this problem when a DIAdem installation work for awhile and then all of a sudden does not launch after the customer installed an update of Windows or a new version/update of AutoCad or SQL Server, etc..  This fix for Windows is often bundled with other software so that you do not know that you're getting.  What it does is tell specifically Windows ignores the version (stored in the Windows registry) Windows DLL as tiara said the operating system installer to use and rather use a new version of the Windows DLL that does not work with the tiara.

  I posted an executable to our outgoing ftp site that has been very successful to this problem and allow DIAdem throw again.  Note that this file "St3ve.exe" will be there for a few days.

  ftp.ni.com/outgoing/St3ve.exe

  Please let us know either way what is happening

  Brad Turpin
  Tiara Product Support Engineer
  National Instruments

• How to customize the DIAdem report export function Menu PowerPoint?

  H all,.

  I can define another "Power Point of export" script to run when you select the menu if "Diadem report' drop-down"Export PowerPoint"a file?

  I know that this menu using the template file to "C:\Program Files (x 86) \National 2012\Resource\PowerPointTemplate.ppt.    My problem is that I cannot 'customize' the PPT template enough to get some items to position correctly on the slides.

  What I did change the script "C:\Program Files (x 86) \National 2012\Examples\Documents\REPORT_Layout_to_PowerPoint.VBS" with the changes I need, set the model to use ppt.  Run the script, and it works as it should.   (This script is not related to the pull down menu function - I maybe something set wrong somewhere).

  I want to get out of having to open this script whenever I want to create a ppt.  I'd rather select the menu drop-down.  Do the traction to the low 'export PowerPoint' use a defined script?

  Thank you

  John

  Hi John,.

  If you are using DIAdem before 2015, you old syntax to change the menu. Here is an example:

  Dim strPanel, strMyMenu, intCount
  
  strPanel = 'REPORT '.
  
  strMyMenu = "list of menus in DIAdem ' & strPanel & «:»»»
  
  Call WndOpen (strPanel)
  
  Call MenuItemCountGet (strPanel, "M1")
  
  IntCount = 1 to MenuItemCount
  
     Call MenuItemInfoGet (strPanel, "" M1. "") & intCount)
  
     strMyMenu = strMyMenu & + "\n" & MenuItemTitle & "-" & intCount
  
  Next
  
  Call MsgBoxDisp (strMyMenu)
  
  strMyMenu = «»
  
  Call MenuItemInfoGet (strPanel, "M.1.14")
  
  strMyMenu = "pos. 14: '& MenuItemTitle '.
  
  Call MsgBoxDisp (strMyMenu)
  Call MenuItemChange ("REPORT", "M.1.14", "My PPT", "call Msgbox (""Hello" "\" "")
  
  

  Greetings

  Walter

• GfSExcel.Dll nicht available in 2015 Diadem

  SERVUS together,

  wanted Ich habe heute Diadem 2015 installed und wie gewohnt (last Version tiara 2012 genutzte) die GfSExcel.DLL in den GPI-extensions "aktivieren" um .dat files in Excel zu if files. Leider finde ich zwar jede Menge others dll aber nicht mehr die Excel Dll. Wo ich denn die as Excel Dll block out it?

  Danke fur eure Hilfe im Voraus!

  Beste Grüße

  MaKo

  Hallo,

  Sharp ist nicht mehr available in DIAdem 2015:

  http://www.NI.com/PDF/manuals/375399a.html

  GPI files filters are no longer available. That's why the following filters are available:

  ...

  GfSExcel.DLL: Use the wizard to use Excel.

  >>>

  Grüße

  Christoph

• What is the algorithm/method used by Diadem for advanced research?

  Hi all

  Can you please let me know what method/algorithm is used by Diadem for advanced research? Please note I am familiar with search function of DIAdem peak, but I need to know the theory/algorithm it uses to find the vertices.

  Thank you

  Hossein

  Hossein greetings

  Verify the last paragraph of this document.

  Let us know if this answers your question or if you have more information on this subject. Good day!

• How to go ChnListBox selection Script Diadem

  I have a dialog box with a ChnListBox that the user selects some channels to use the multiple selection option.  I would like to pass the index of the selected channel to a variable to use in a script.

  So far, I tried using the 'TV' when global variable based on the user selection when you press the button 'OK' of dialogue with the code below:

  Sub Button1_EventClick (ByRef This) ' creates the event handler
  For i = 1 to ChnListBox.MultiSelection.Count
  TV (i) = ChnListBox.MultiSelection (i) .value
  MsgBoxDisp (TV (i))
  Next
  Dialog.OK
  End Sub

  I also tried to set the variable on the change of the ChnListBox event.  In both cases the MsgBoxDisp of 'TV' display the index of the selected string correct but are not transferred as "NOVALUE" when you attempt to read the variable in the script of DIAdem.

  Any thoughts on the correct way to do this?

  Thank you

  BG103

  OK, I could understand it with the help of a user defined a global variable to connect the tiara script dialog box instead of the predefiend tiara Global Variables that seem to have such specific applications that use with text or long integers.  I remembered see updates warning against the use of user defined globals at some point, but it seems to do the job.

• How interface bronkhorst RS232 communication flowmeter in DIAdem DAC?

  Hello

  I am Thiyagi.I am working in WABCO INDIA Ltd. I bought Bronkhorst Flowmeter. I use the tiara DAC Professional version. I want the meter to DIAdem.Flowmeter of the interface have a RS232 communication. In my pc, I have a COM1 port. DIAdem DAC which icon I want to use to connect the flow meter.

  Hello hmongz

  You can already succeeded, but still, here's what I used to do:

  I could do this with flowmeters mass Bronkhorst and Brooks, and had a pretty good success using their method of DDE (dynamic data exchange). To do this, download their software from FlowDDE of Bronkhorst.com, start the DDE driver and he can communicate with the MFM. Once it works, insert a DDE lockk in CAD DIAdem, configure it appropriately and it should work.

  Greetings

  Michael

• Google Drive not visible in the tree structure Diadem Navigator

  Hello!

  In our company, we use Google Apps. Google Reader is a handy tool to use to ensure the instant backup of your files. However, my problem is I don't think Google Reader in the Navigator tree structure, at least not systematically. There were occasions where the drive was visible, but now I can't find. The reader has no doubt exists and is accessible in Windows Explorer. Anyone know what could be the problem and how to fix it (except avoid Google Drive as working space)?

  Hi Brad,

  Thanks for your suggestion, it worked very well worked.

  But before I tried to add a new drive, I've been playing with different modes in the browser tab. I discovered in the mode 'Data bank' with 'My computer' as source (or root), the directory structure has no problem to display Google Reader - works fine.

  High til' today, I didn't know there are two display modes available, I've always been using the mode "data search". In the mode "Data search" Google Reader does not appear when you try to navigate to the local C drive. In the 'data' finder Google Reader mode is only available when add you it as a drive in Windows Explorer.

  So long story short, if you want to have easy access without problem to your Google Reader in DIAdem, add it as a drive in Windows Explorer.

• Collective responsibility / duty cycle in DIAdem calculation

  It's probably pretty simple to do, but still I only got halfway there, I could use some help!

  Basically I have a tree of torque and speed of files datalog, where I want to extract an array of number of revolutions of the tree to discreet couple levels to be used in CAE fatigue, as this analysis:

  423 tours @ 1000 Nm

  569 towers @ 1200 Nm

  143 laps @ 1400 Nm

  The script to "quantify" gets me halfway there - this allows to reduce the torque of 200 Nm operations curve and it is quite easy to integrate the speed to give the total number of revolutions, but now I need to count the number of laps at each stage of quantified couple and generate results.

  There must be a way to do this with all the tools available in DIAdem, but being a new user, I am struggling to find the right method.

  Any help would be appreciated, thanks.

  JohnGrove salvation,

  It seems to me that you must use the 'Classification' ANALYSIS functions to count the number of revolutions in some compartments of preset torque.  You can specify exactly what conditions couple to use for counting in the "Classification" ANALYSIS function.

  So the main question is the creation of a channel of revolutions according to the data that you're starting with.  It is not clear to me that this can be done with just a speed channel.  You have a tachometer channel, or you know the circumferance of the wheel and is in contact with the floor at all times?  As soon as we have the tachometer channel you will be free from home.

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• Y axis Auto scale does not work in 11 DIAdem

  Hello

  A few years ago, I created a user dialog box to select and display strings in the mode of DIAdem.

  It has worked well for all DIAdem versions 10.X, but there is a problem with the scale of the value axis for DIAdem 11.X.

  The channels are Eurorest [n systems (linear)]

  In DIAdem 10.X axis y for each separate chart would be put on the scale automatically accoring to the minimum and maximum values of the displayed string.

  In DIAdem 11.X of the axis y for each graph is scaling of 55.0397 to 133.7655... for all channels, regardless of the displayed string values.

  When I click on the button 'Zoom Off' scaling becomes correct.

  What should I put my script correctly scaling of the y-axis?

  The following code is used to set the scale (no scaling of the axis are not is defined):

  R1 = SelectedStartTime ' there is a variable defined previously in the code
  R2 = SelectedEndTime ' there is a variable defined previously in the code
  View.ActiveSheet.Cursor.X1 = R1
  View.ActiveSheet.Cursor.X2 = R2
  View.ActiveSheet.Areas (1). DisplayObj.XScaling = "RangeZoom".

  I tried to add this code, without result:

  View.ActiveSheet.Areas (1). DisplayObj.YScaling = "n [physical] systems."
  View.ActiveSheet.Areas (1). DisplayObj.YScalingMode = "automatic".

  Thanks for you response Andreas.

  Your suggestion has probably works well for the DIAdem11.X, but I need (preferably) solutions that work for both DIAdem 10.X and 11.X (so that the same script can be used for both versions).

  10.2 DIAdem (which is the version developer I) there seems to be no property named XScalingMode for CurveChart2D (only YScalingMode).

  However, I found something that worked for both versions, namely:

  View.ActiveSheet.Areas (1). DisplayObj.ZoomCursor = "BandZoomCursor".

  After you set this property (in addition to the code in my original post), graphs are put to scale properly (on 10.X and 11.X).