PE 2900 6 TB don't ext

Similar Questions

• clear Ext hard disk partitions in El Capitan to return to a single

  I have a disc of lightning (WDC) 2 TB ext.  I had it partitioned with 2 partitions - but now I want to use the entire disk as a single partition.

  I searched the web a solution (re El Capitan) and found this solution below

  BUT whenever I have to erase partitions and then as soon as the volume test to find the space by removing the partition - but the sign less is grayed out and only the sign is available.

  I did the operation to clear the partition and then tries to take over the space of the volume - as suggested - but I can't do it if it is grayed out!

  I lost hours tonight - can someone please help?

  Thank you!

  ------------------------------

  Step 1: Partition Erase

  To begin, open disk utility while searching for it using Spotlight or find in Applications > utilities.

  Then click on the partition that you want to remove in the left panel.

  Screenshot by Matt Elliott/CNET

  With your selected partition, click the clear button in the upper part of disk utility. This will bring up a window with a clear button. Click Remove , and then click done.

  Step 2: Delete Partition

  With your partition erased data, you should always delete the now empty partition in order to reallocate space for the rest of your hard drive.

  Screenshot by Matt Elliott/CNET

  To do this, select your hard drive in the left panel and then click on the button at the top of the disk utility Partition. In the graph of the pie on the left, click on the corner that represents the partition you just deleted. Click on the button "-" and then click apply.

  Are the partitions involved "OS X Journaled" format?

  C.

• Airport Ext Radio stop broadcasting

  This 3rd Gen airport Ext is in mode bridge as part of a network of Airport Time Capsule. The Extreme broadcasting this wireless diagnosis when the radio is off (Bridge Mode). When the extreme is physically disconnected from the supply, then Wireless Diagnostics tables correctly this radio report.

  The only clue I have is that it is wireless the network. I know it's different from the radio... I don't know, this means that it is a signal to get out (or is it a received signal)?

  Any thoughts appreciated

  The Extreme broadcasting this wireless diagnosis when the radio is off (Bridge Mode).

  Hi buz.

  'Off (bridgé Mode)' would have nothing to do with the question of whether or not the wireless radio broadcast. This function determines if the airport acts as the "primary" router that distributes the IP addresses to network devices, or if another router is in control of the management of this network.

  If you don't want the AirPort Extreme to broadcast a wireless signal at all, then you will have to turn to "Off" the function Wireless to the router from the airport.

  

  This is easy to do using AirPort Utility on your Mac.  (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the aircraft from the airport

  Click Edit in the window that appears

  Click on the Wireless tab at the top of the next window

  Change the settings of the Network Mode to "Create a wireless network" (emits a wireless signal) to 'Off' (no not a broadcast signal)

  Click Update at the bottom right of the window to save the changes you made, and reboot the device from the airport.

• Electrify: Ext SD Card

  I have looked in other air but don't see how to get programs to use the ext sd card. Most great on for me is the tape recorder. I need to be able to record my recordings on the ext sd card, as some of my recordings will almost 2 hours in wav format so that they are easy to play anyware.

  On a different note, this phone is awesome. The signal for data and wifi reception is unreal it beats any phone I have ever owned.

  The developer can fix the problem by using the following document.

  Mark

  Support Forums Manager

• Red question mark on the desktop for inadmissible USB Ext HD icon

  My new WD 1 t ext HD works on other computers.  On mine, after downloading an update of windows XP is no longer is recognized.  Works fine before that for backup, etc. After update of windows, the desktop icon remains, but there is a red question mark on it.  I can't find the drive letter or device in my computer and other suggested methods. The power supply to the hard drive light stays on. But restarting, restoring the system, change the location of the usb connector, plug the cables all tried without success.  Sometimes it is his own. Not lately.

  By trial and error, discovered what is not clearly described elsewhere.

  Windows Update is the culprit. Proven by repeating its use.

  But there is something to "unplug" and "reconnect" the HD position to have your PC "recognize" after the problem occurs.

  All the following must be done AFTER PC IS SHUT DOWN:

  1. Remove and reconnect the power cord HD

  2. Remove and then reconnect the USB cable to the HD connector.

  3. pull out and then plug the other end of the USB cable to a USB port.

  THEN RESTART your PC.

  MS should explain that more clearly - and should recognize this problem of Windows Update.

  From my experience, Windows Update causes many problems still unrecognized in XP SP3 and possibly other versions of Windows.

  Only hope it helps others in the meantime.

• WRT610N & ext HD via USB (for the use of NAS)-can not move files to the external

  Linksys WRT610N v1
  -Firmware Version: 1.00.03 B15 (updated about a month ago)

  Western Digital My Book Mirror Edition 2 TB model # WDH2U20000
  - http://www.wdc.com/en/products/products.asp?driveid=466
  -NTFS,
  -mapped with my M: drive, and
  -named WD 2 TB-MIRROR.

  HP laptop (Windows 7 Professional 32-bit)
  -normally wireless, but currently hard connected via Cat-5 Ethernet cable.
  -That is the only computer at home and I'm (of course) the admin ".»

  While I'm the 'computer' guy for family and friends, I turned in the novice because of this; I'm lost and feel beaten.  Please be as complete as possible with instructions/answers.  Guess I'm a noob.

  My plan is to use the WD external hard drive as a backup of my files and run the music/movies, etc out of it to my TV installation / audio salon through my Playstation3 or whatever.  My problem is simply to obtain the files copied to the external hard drive.  And being that this is a fairly simple HDD, I think that the issue could be with the USB (SIN) / configuration of the connection through the router.  That, or maybe there are authorization implementation issues.  I know that the HD has a setting for the mode 'sleep' - I did get to a point where I can adjust.  Anyway, I was able to get a record created but nothing to copy.  Then, I was (finally) able to delete the folder, etc..  I don't know if I'm missing some configuration/installation or if the scenario is just climbing.

  And for those of you who know software MioNet and/or WD Anywhere Backup provided with outside, I have installed the software on my computer laptop but has not been signed by all accounts and do not use them.  So I think that they are not a factor.  Just thought I would include this info just in case it is important.

  Here are several screenshots which can help you diagnose my problem:

  • Ext HD not found by Windows Explorer, even if you can 'see' it. He slept?
  • Ext HD "Properties".
  • Ext HD "Properties - Security.
  • Management Administration WRT610N
  • The shared folder of WRT610N
  • The WRT610N storage administration
  • Disk storage WRT610N

  On the router configuration page, rather than share the public folder, share the whole score. Once done, on the computer, map the drive and check.

• I don't know what I'm doing...

  -Very well, so I'm exaggerating, but I'm still stuck. I have 4 servers newly Squires of my college. They are: POWEREDGE 2900 - with 2 dual core Xeon 3.2 GHz - 4 GB RAM - and a RAID0 configuration - 3 x 146 GB 10 000 TR/MIN/3 GB/s HARD drive from adding up to approximately 446 GB of space. POWEREDGE 2800 - with 2 dual core Xeon 2.8 GHz - 8 GB RAM - and configuration RAID0 - x 5 36.4 GB 15 000 TR/MIN/3 GB/s adding up to about 160 GB of space. POWEREDGE 2600 - with 2 single core Xeon 2.4 GHz - 3 GB RAM - single RAID0 config - 1 x 73.4 GB 10 000 TR/MIN/3 Gbps. POWEREDGE 2600 - 2 single core Xeon 2.4 GHz - 1.5 GB of RAM - single RAID0 config - 1 x 73.4 GB 10 000 TR/MIN/3 GB/s. So basically, I would like to know what I can do with these. I hope I can do something with the 2600's as used as a small farm of rendering for Blender? Is this possible? And the 2900 with Ubuntu LTS 16.04.1, I already use as a dedicated server hosting films and making accessible with Apache2 as a Web site. Regarding the last 2800, he has also run LTS Ubuntu 16.04.1 as a game for MINECRAFT server. Don't get me wrong, all this work is absolutely perfect. I do not see these that use them to their full potential. I mean, come on them, I have 4 PowerEdge servers! Freaking stupid, even if they are a bit old (OK a lot of old). So, as I said, I just want to know if this can happen, and what they can really do. Also, if that RAM and CPU max components they contain would be useful. (Bring on the tech talk please.)

  James Ching

  I just want to know if this can happen

  Sorry, but I don't know exactly what is the issue.

  2900 - if max of 64 GB of RAM review II or III, 32GB if I review.

  2800 - max 16 GB RAM (4x4Go).

  2600 - 12 GB max (6x2Go).

  I saw the 26 x 0 and 28 x 0 in rendering farms, but I don't have all the details on how this was accomplished.

  What specific questions do you have?

• The pitfalls of migration from Server 2003 to 2012 R2 on Power Edge 2900

  I have a Power Edge 2900 2003 Server to Server R2 2012.

  The known pitfalls?  Going, I have a problem with the SAS6/iR Raid Controller?

  I made a few new installations on other machines with Server 2012 R2, bur never upgrade. Just a little nervous, I have the weekend to work on it.

  Thank you

  I don't think that you can pass directly from 2003 to 2012 R2, but R2 2012 is fully supported on the 2900, so there should be no problem running it on there. I strongly suggest you update the system firmware (BIOS, GER/BMC, PERC (first pilot)) before moving on to 2012 R2.

• PowerEdge 2900 on board sata ports

  I have a PowerEdge 2900 server and would like to put in a single spare 2 TB SATA for additional storage (non-critical).  The motherboard has two onboard SATA, A & B ports.  When I try to connect the drive onboard SATA ports, the BIOS does not detect anything, and when I change the type 'Auto', save the settings and restart settings are not stored in the BIOS.

  I don't know if the SATA motherboard ports supports hard drives, or if there is other reason things do not work.  I tried different cables and tried the drive in another computer, and everything works fine in another computer.  Plan to put in some additional SAS drives in the drive box, I'm looking for an intermediate solution.

  Any help is appreciated.

  Thank you
  Josh

  I've seen this same problem and fixed it. He must go to "Shipped" in the bios and enable "Onboard Sata".

• Need help with a dell Poweredge 2900

  Hello and thank you for taking the time to look at my post. I'm new to the part of the server of having to learn for my new job and the computer. at the moment I am working on the poweredge server 2900 of the company. the main person of tech IT is eager to start the operating system, the front-wheel drive, but whenever I tried to install the server in the window on them. they appear at all. I went into the raid controllers and they appear but none where els. He said that it had removed them or something, so I had to re install the configuration for the raid controller will pick up. I don't know if what he wants can happen. I know possible with normal computer, but like I said. I'm still new to the part of the entire server from the computer. Thanks for any help in advice :)

  You have to be careful with the use of the following words, because it is confusing if evil is used:

  Disks - physical hard drives used to store data
  Drivers - software used to tell the operating system how to use a particular device

  Start CTRL-r, highlight the controller on the VD MGMT, F2 screen, Create/New... don't forget to tick the boxes advanced and Initialize When creating new arrays. With two players, you can create a RAID 0 or RAID 1 - again, don't use not RAID 0. (If all tables exist, delete them all first.)

  Once the table/VD has been created, you can start the OS installation disc to install. There is NO need to define "master boot record"... This will be done automatically during the installation of the OS.

  What OS you install? With 2003, you must load the drivers during installation... Avoid using too much at this point: 2003. With 2008 and later versions, the drivers are included, it is not necessary to load them during installation.

• PowerEdge 2900 Perc 6 / i internal Raid Controller

  OK, so I use a server Dell PowerEdge 2900 with a PERC 6 / i integrated RAID controller

  I have configured the RAID array very well, installed Windows 2008 R2 and works fine and dandy

  The only problem I encounter is that, when starting the server (Post), I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  Thank you

  Hello

  joeyjojo56

  I get a message on the cable SAS B are not connected or misconfigured.  The bottom of the basket on my server, which goes to the internal drives, has only a port where I can plug a cable between the Perc 6 / i.  Where is the 2nd wire supposed to go?  I can't find the second port.

  PERC connector 0 goes to the bottom of basket. Connector on the PERC 1 connects to the modular Bay. If you don't have the module Bay optional then you ensure that you use the 0 on the PERC and not the connector 1.

  Thank you

• The PowerEdge 2900 server RAID

  Hello everyone and good day

  I have a PowerEdge 2900 which was erased and raid configured with 2 discs and ready for os install. However when you try to use the Server Wizard, I get an error that his stats can not detect readers or they are not initialized. I do all the raid configuration and should be ready. I took a peek in the bios of the main server and I do not see listed in the boot sequence raid controller. all I see is cd rom on b sata and hard drive. until the server has been annihilated the raid controller has been listed in the boot sequence menu. I changed a setting that I shouldn't have or I am missing a part of the process? No matter which lend a little and fix this? I would like to get the server operational return. the server has a perc 6i

  When I got is the server was running. However, he came from a health care facility and had to be wiped.

  I have it wiped myself just by going to the raid controller and removing the VFD and reconfiguring with new configuration.

  Please tell me that I don't have just the weight of the heavier paper in my office.

  You must configure AND initialize the virtual disk (table)... tick all the boxes advanced and Initialize during the creation of the VFD.

  You can also use a version of "server Wizard" (obsolete) that does not support the hardware in your server.

• Drive HARD Ext cant allocated, it is said: the request could not be performed because of an i/o device error

  Hello world. IM new here.
  I would like to ask questions about the allocation of disk

  My drive HARD Ext (WD my passport) will not appear. so, I check in computer management, and my disk not allocated
  When I try to assigned by the following method
  It is said: the request could not be performed because of an i/o device error

  Please... is if everyone there a solution to this issue?

  I tried to update the firmware, WD Essential, WD utilities

  but this does not solve the problem...
  When I try to checkdisk in promptcomand but I don't know how to put it, because the drive isn't there...

  Please help me...

  Hello

  This error may be coming because of unavailable storage required for the motherboard drivers. You can follow the steps one by one, mentioned below and check if that helps.

  Method 1: Uninstall, and then reconnect the external hard drive. This method solves the problems where the currently loaded USB driver has become corrupt or unstable.

  1. Click Start, type Device Manager in the box Search
  2. Click Device Manager in the returned list.
  3. Click disk drives in the list of hardware
  4. Right click on the USB external hard drive with the question and click Uninstall.
  5. Once the hard drive is uninstalled, disconnect the USB cable.
  6. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  7. Look for the USB key in Windows Explorer

  Note: Connection of your USB external hard drive to a non powered USB hub can cause a lack of sufficient power to operate the external drive. Instead, plug it directly into your computer.

  Method 2: Install the latest Windows updates.

  This method will install the latest drivers for your external hard drive USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  If your problem still exists, go to method 3.

  Method 3: Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. Click Start, type device in the area Manager Search , and then click Device Manager.
  2. Expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.
  3. When finished, restart your computer. Your USB controllers will automatically install.

  If your problem persists, go to method 4.

  Method 4: Disable USB selective suspend framework. This method prevents your power off USB external drive.

  1. Click the Start button, type power management in the search box, and then click choose a power plan.
  2. Next to your currently selected plan, click Change Plan settings.
  3. Click change advanced power settings.
  4. Click in the box USBsettings, and then expand the USB selective suspend settings.
  5. Click on the area, and then click the menu drop down and select disabled.
  6. If you use a laptop, click the cell, and then click the menu drop down and select disabled.
  7. Click apply, and then click OK.

  If this does not resolve your issue, go to method 5.

  Method 5: Install the latest drivers for your motherboard chipset. This method updates the chipset of your motherboard drivers, so that your computer will use your external USB hard drive.

  1. See the documentation for your computer that will contain the name of the manufacturer of the motherboard.
  2. Visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers
     (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)
  3. Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  Please post with the State of the question.

• Project of restoring links on the other computer, with the ext hdd same source files

  I was working a project with all the source files for the project on an ext hdd. This machine in particular, then crashed and I have more access to it. data recovery after extensive (and expensive), I got the program from the old pc files and some of them include the first pro files. Is it possible to link these data, creation of a new pro, always the same machine using the ext hdd with the source files? Thank you

  That's the advantage of keeping your external media.

  Just open the project first on the new computer.  So you should not need to be reprinted media if the external drive has not changed its name from Volume and is saved as the same drive letter (PC).

  Worst case, when you open the project of the missing file dialog box will open.  Make sure to repeat others is checked and navigate to the folder / outside looking.

  Once reconnected, save the project and then...

  go and drop your auto save preferences to the external location, so you don't have to retrieve project files crashed in the future!

• My Ext HD gets full. How to move my files containing all original photos for a new HD Ext.

  I use LR 4 and the Ext HD is full that contains all the photos. How to move to a new HD Ext. I can't take any chances, I have a lot of images. Thank you. I am running Mac 10.8

  Can be done in Lightroom, but some recommend this method.

  1. close Lightroom,

  2 COPY the FILE MASTER containing all of your subfolders images for the new HD Ext Finder/Explorer or copy of the software, (using "copy", you can compare files to check that there is no corruption of the files being copied).

  3. open Lightroom.

  4. in the folder LR Panel-Right click your MASTER FILE and select "update folder location.

  5. in Finder/Explorer window opens - choose the new location of HD Ext. LR will then reference your images here.

  6. when everything works well from the new HD Ext you can remove the master file of the internal disk images.

  7. do you have a second HD Ext to make a "Clone" of the new HD Ext as backup.

  Read the chapter in this link-"Location of the update folder"

  Adobe Lightroom - find moved or missing folders and files

  Congratulations Jim - you just posted first!