PE7 windows 7 without video, only sound

Similar Questions

• get a green screen with no video only sound

  Why do I get a green screen with no video only sound?  Is this a driver problem?

  Hello

  Try a new installation of the Flash plug-in as follows.

  First, download the Flash uninstall utility on the link below and save it in your downloads folder.

  Flash Player Uninstaller.

  Once the download is complete, close all the browser windows, open your downloads folder and run the program uninstaller.  Once done, restart the laptop.

  Then (unless you already have it), download and install Firefox , then using Firefox, download and install the latest version of Adobe Flash. Note: You can deselect the option to include McAfee Security Scan Plus before downloading.

  Close all browser windows before you run the installer of Flash.

  Start Firefox and see if the videos etc. play Ok in this browser - if they do, close Firefox, open Internet Explorer and click on the same link Adobe Flash above to get a command prompt to install the Flash component.  Once completed, restart Internet Explorer.

  Kind regards

  DP - K

• WMP 11 windows xp without video, sound only

  Windows media player 11 plays audio but no video avi

  HELLO Andrea,

  This is because WMP is not the video Codec for this file, you need to download Codecs or VLC
  VLC is a media player as well and a lot more codecs.
  See you soon ~

• AVI files - no video, only sound problem

  Hello!

  I'm affected by some very strange and _very_ annoying problems with my Adobe Premiere Pro CS5 software - my. AVI files have no video.

  I recorded a lot of video for a remake of the video on my camera: Toshiba Camileo X 100 HD (720p60frames).

  I the play well in Windows Media Player and VLC Media Player and others, but when I import into first, I get only audio - video NO.

  I've been searching around the Internet for a solution - but found - it really gets on my nerve as I look forward to edit my video .

  The solution that would work, was Super (a conversion program) to download and convert my AVI files into MP4, h.264/AVC with AAC LC codec, but it will take years, and I'm also having difficulties in finding good quality video as the original file - ergo, I don't want to lose quality when converting. Convert all my files will take years - got about 10 GB - and I only see this as an emergency solution.

  I bet that there MUST be a fix for this, and my AVI files may work correctly for Adobe CS5 first. I need help - please help!

  Thanks in advance!

  p.s. I'll just say that I work with files before AVI, another project, but these cases recorded with FRAPS on my computer.

  There must be another solution!

  There are; transcoding is a waste of time, space and quality:

  1. Download and install VLC.
  2. In the folder containing your AVI files, create a new text document, called "avi2mp4.bat" (without the quotes). Be sure he has the. BAT extension. you need to remove the. TXT extension, which is added by default.
  3. Paste the following text in the command file, and then save it:

     @ECHO OFF
     for %%a in (*.avi) do "C:\Program Files (x86)\VideoLAN\VLC\vlc" -I dummy "%%a" --sout=#:file{dst="%%~na".mp4} vlc://quit
     
     

  4. To run the package, simply double-click, or you can drag and drop the AVI files on it, and they will be repackaged as MP4s with the same name as the original. If you use the approach drag / move, you can save this file anywhere on your hard drive, and all the files dropped on it will be converted and placed in the same folder as the original.

  That's all. The MP4s properly is important in the first, and you will no transcoding.

• WMPv11 for XP with SP3. No video only sound to avi DVD

  Am able to playback, BBC TV show recorded on DVD, on my desk, but not on my Toshiba laptop.
  I hear only about the latter.
  The files on the DVD are avi.
  I use Windows Media Player v11 for OS uses XP with SP3.
  Apparently, there is no difference in video Codecs on the computer.
  Any suggestions?

  Notice never played right? They should not have. Download the Pack K-Lite full for your machine.
  http://www.codecguide.com/download_k-lite_codec_pack_full.htm

• No images - only sound in Internet Explorer

  Hello

  When I test my build on local everything seems to work in Chrome, Firefox and IE (on Win7), but when I test the same files downloaded on my server there are no images in the video - only sound. There is no problem for Firefox and Chrome.

  I don't think it's a problem with codecs because it works when I play the video files on the. And its probably not a security, error because the file is loaded and I can hear the sound...

  Anyone know this problem and what can be done to solve the problem? Any help would be appreciated!

  The file loading is done through the VAST library

  UPDATE: tested on MAC with Chrome and Safari. The same problem is also here: no images...

  Update2: Tested on pc Win8.1: it works with IE but not audio or images in Chrome. I'm really confused now!

  OK, I think I solved it myself. It fails on IE when wmode is direct and stageVideo is true... It had to do more tests to see how it works on other platforms.

• Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Media Player. I have a few movies on memory stick, but when I open the media player it only plays the sound track without video. Can help you!

  Hi Jim,.

  1. What is the operating system installed on your computer?

  2. What is the format of the file you are trying to play?

  3. it worked earlier?

  I suggest you to follow the steps and check if it helps.

  Installation of the Codec and check if it helps.

  Codecs: Frequently asked questions for Windows 7

  Codecs: Frequently asked questions for Windows Vista

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• No video is coming, but only sound, when I play in windows Media Player 11, os is xp

  No video is coming, but only sound, when I play in windows Media Player 11, os is xp

  Hi james_pl1973,
   
  -Is this type of specific file to some issue or is it the same with all types of files?
  -You get an error message or error code trying to watch the video for files?

  It is likely that the codec is correct / encoder is not installed or is installed but has been corrupted by another program.

  A codec is a software to compress or decompress a digital media file, such as a song or a video. Windows Media Player and other programs use codecs to play and create digital media files.

  A codec can consist of two components: an encoder and a decoder. The encoder performs the compression function (coding) and the decoder performs the decompression function (decoding). Some codecs include both components and some codecs only one of them.

  For example, when you rip a song from an audio CD on your computer, the player uses Windows Media Audio default codec to compress the song into a compact WMA file. When you play that WMA file (or any WMA file that may be broadcast from a Web site), the player uses the Windows Media Audio codec to decompress the file for music can be played through your speakers.

  Follow the steps listed in the article given below to resolve this issue.

  You receive a codec error message or play audio but video does not play when you play media files in Windows Media Player 11

• Windows Media Player will only play a sound with no video .avi and .mov

  I started having a problem where the Windows Media Player will only play the audio portion of my .avi and .mov video files.

  These files were created by my FlipCam or my Sony Handycam.

  I never had problems until recently and think that it is due to some kind of Windows Update.

  Both my computer and my wife's computer had the same problem and we are both using Windows XP Home Edition.

  I apologize if this topic already on this forum.

  Thanks for any help and advice.

  CoDec = compressor decompressor.
  A program is used to compress the file. You then need to unpack the file to play, you need the codec used to compress the file to decompress it on your pc.
  You need DVD playing software installed to power the mpeg codec, or you can buy a codec to just run in media player.
  AVI is a wrapper and may well contain more than 800 different file types, it has 800 different codecs!  Thus, to read an avi file, you should know what codec was used to do and have that installed on your pc to read.
  DV.avi is made with the dv codec, divx.avi is made with the divx codec.
  Of course, that manufacturers make their codecs, you must make sure you have the latest being, to be able to read files made with it, so everything just because you downloaded the codec divx 12 months ago does not mean it will play files created with codecs of today!

  I hope this explains it is ok for you.

  It surprises me that you say that you have downloaded all the updates of altest, but are still running wmp9, where we are now on WMP11 for XP and 12 for win7.

  I would update my WMP version first.

  Here is a page that will tell you that the codecs are on your pc and who has access to WMP 11.
  http://www.myvideoproblems.com/tutorials/HowToFindCodecs.html

  Here is a page that will tell you how to know what codec was used to create the file that you are trying to watch and also if you have the right codec for it
  http://www.myvideoproblems.com/tutorials/AVIcodec.html

  It is generally accepted that the codec packs adding is a bad idea, so if you need a codec to read a certain file, google it's manufacturer and just install the one you need.

  I would work just on the pc at the same time when you found what the problem is, you can fix on the other 2.

  Need more help with this, just ask.

• video downloaded to my lap top from an SD card, cannot get picture only sound

  video downloaded to my lap top from an SD card, cannot get picture only sound

  Hi Pauline,

  as volunteer asked J format that the videos were saved is the most logical question here.

  All films registered as media of Windows, or MPEG, avi files, should be good.

  B Eddie

• my player windows media apart when I try to play the video the sound works but there is no picture just a black screen and all my music files are there and play very well sound just video that gives trouble?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: my Media Player does not work when I play video all I get is the sound, the screen is just black hear any picturedoesn can't if it's a DVD or a download on the internet its just sound and a black screen?

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem
  Hello
  
  1. have you made changes on the computer recently?
  
  Method 1.
  Change hardware acceleration
  You can try to change the hardware acceleration in the middle and check (you can try another level too.)
  a. right click on a space empty on the desktop.
  b. go to the resolution of the screen.
  c. click Advanced settings, and then click the "troubleshooting."
  d. set the hardware acceleration in the middle. (here you'll get the only option your video card sound support).
   
   
  Method 2.
  a. you can also check that Windows is up-to-date to check updates for your hardware.
  You can also run the difficulty below that diagnoses and identify codecs that can cause windows to become unstable or stop responding.
  http://support.Microsoft.com/GP/video_freezes_or_crashes
   
  b. if the problem persists, you can check the latest video card driver provided by the manufacturer of the PC that is compatible with Windows Vista is installed.
  You can also check out the article below which explains to update hardware drivers.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  
   

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card?

  How can I download photos and videos from my camera digital/dvr (panasonic sdr s50) to my computer that has windows MediaPlayer, WITHOUT erasing the cameras SD memory card? (I am running windows xp professional).

  PS - I'm a senior and not warned, any computer do pls 'non technical' answers as possible.

  Thanks in advance for the answers to my question!

  Hello Fred!

  • First create a new folder by right click on an open space on your desktop
  • hover the mouse over the new, & click on new folder
  • right-click on the new folder and choose Rename
  • write your selected folder name
    
  1. Connect your data cable USB & POWER to the camera or insert the memory card
  2. Open the files and Select the files you want to save
  3. Select files butten now the mouse left click and move the mouse over the files
  4. then right click on the selected files and click copy
  5. go to the folder you named and open
  6. right-click and select Paste & that's it!

  I hope this works!
  Do not hesitate to ask, I don't mind!

• Video and sound glitches windows xp service pack 3

  How can I repair internet video and sound glitches?

  Discover the mfg, go to their web site & get the latest drivers/software.

  Make sure that Direct X is also underway.

• Problems with Windows Movie Maker: video/Audio, cut and cutting

  I recently did some videos, but there was this thing really annoying happening in the middle of the video. Okay, let's say I put together all the clips in Windows Movie Maker for my taste, and it's how I wanted it to be. I saw it and then suddenly in the middle of the video the sound shuts down or freezes the clip or it will just empty. I have not been able to solve and so I can't do more videos without him just hide or cut.

  Please help, I need to make a video for a deadline but nothing I try suddenly freezes or cuts in a specific clip. How is what is happening and what can I do to stop it. I've accidentally done something or it just freezes.

  Thanks, I need all the help I can get!

  I use Windows Vista. And this has only been produced recently, that my previous videos have been very well.

  Well well... once again, without success. The same thing happens, it freezes in the middle of the clip. I get the FLV file by orbit actually, but I don't know who is a hoarder of corrupted file. What should I do?

  ==============================================
  Don't know what to tell you... apparently the original .flv video clip is damaged.

  The following free download includes a utility to convert .flv, but to this
  point that I am not convinced that you will have success.

  Pazera Video converters Suite 1.2
  http://www.Pazera-software.com/products/vcsuite/
  (click on the blue Download button not the Red)

  FWIW... the name of the file that you download is:
  Experience of digital media of John Inzer - MS - MVP - 'Pazera_Video_Converters_Suite.zip '.

• The upgrade to windows 7 without the HP Windows 7 program

  Hello

  I think the upgrade of my HP pavilion with windows vista laptop Windows 7 but missed on the upgrade program. I would like to know if the programs that came pre-installed on my laptop as Cyberlink DVD Suite Deluxe, microsoft Works Manager and recovery would still be there after a clean install or can I download these programs at HP and if so could you give me a link. I would also like to know if I can make the disc bootable recovery for windows 7. I would also like to know how to get the software/programs and drivers for windows 7 for my laptop and the best way to install windows 7 without programs to upgrade windows 7 HP.

  Thanks for the reply. I wandered just so I can get a download to a compatible HP Recovery Manager on Windows 7

  I don't believe that you can. The Recovery Manager which comes with a HP installed W7 is supposed to work with some serious W7 DVD's, not Vista. You can try it, but I don't think it will work. If so, that's fine.

  Here is a link of Cheryl to download some third-party programs that will create recovery discs. Then you won't need the Recovery Manager:

   

   http://h30434.www3.HP.com/T5/operating-systems-and-software/copying-a-recovery-disc/m-p/249208#M35802

    

  This is the last post from Cheryl.

  and also, I would like to know if the recovery partition is still there after cleaning installed

  If you choose not to delete the Vista recovery partition, it will always be there, but the once you have created your recovery DVD of Vista, you no longer have any in any way. Some people have kept and tried to make it active all in W7 and it did not work. This is because it is designed to work with Vista. I got rid of all the baggage of Vista when I did my installation on my HDX.  It provides a clean slate to work from. Vista recovery disk you did is bootable DVD and does not require the present recovery Vista Manager or partition.

  When you read the tutorial that said you that you will create "unallocated space" it erases the hard drive nice and clean so there is no more contradictory left applications for Vista. I deleted the entire disc and left nothing of Vista, including the Vista recovery partition.

  and if I use my vista recovery disks can I still go back to windows 7 using the installation disc or if I have to buy windows 7 again.

  You can use the Windows installation disc as many times as you want. as long as it's on this machine. If you go back to Vista just put the W7 disk in and try again. If you follow this tutorial of Cheryl and my instructions, you shouldn't have any problems. Here's a useful tip. During the installation of W7 you will be asked to enter your product number and activate it online.

  Choose not to: use it as a 30 day trial and when you are satisfied that everything is up and running then you can activate it on your own, as long as it is in this 30 day window.

  Just to point out, you can use the disk on any machine for a 30 day trial. If you have a friend who wants to try W7 you can lend him the disc. They will have no choice, but to use it as a trial because you have the only key to product. The product is on the box plastic and not anywhere on the installation disc. The drive is useless with a legitimate product key.

  After 30 days, Microsoft will lock them out of their computer if they do not enter a key.

  P.S. I don't have the HP Windows 7 Upgrade option. I'll buy Windows 7 in my computer store

  When you buy your drive of W7 make sure and get the upgrade because it is cheaper. It will allow you to perform a new installation you have a Vista OS works.

  The only time where you need to purchase a full version is if you install on a computer with no previous operating system on the hard drive.

  Tip: After loading of the W7 the first driver you want to install is for the video card (NVIDIA I think) you'll find out why.