PERC 6/E and PERC 6 / i Firmware download - it's actually the same file?
My Dell PowerEdge R710 has two PERC 6 / i and PERC 6/E installed. Both with RAID arrays active. I do an update of the system (BIOS, iDRAC, the life cycle, OpenManage and PERC firmware). I noticed that I have downloaded two files DUP of the firmware for the PERC 6 / i and 6/E and they seem to be identical in all but name.
Do both?
- SAS - RAID_Firmware_3H5G8_WN32_6.3.3 - 0002_X00. EXE
- SAS - RAID_Firmware_F96NR_WN32_6.3.3 - 0002_X00. EXE
It is advisable to run updates for internal/external controllers, because they "may" have differences in the firmware. The payload for updates in THIS version are the same... an update can update them both, but I suspect it will update the device it was intended.
Tags: Dell Servers
Similar Questions
-
Can I install and use 2 versions of Mac OS x on the same HARD drive?
Can I install and use 2 versions of Mac OS x on the same HDD MacPro?
Or do I need 2 discs for each version of the system?
I have only to consider their use aIternately. I wouldn't run them both at the same time.
The machine is running OSX v.10.6.8
I downloaded OSX El Capitan, but not tried to install it.
Here are the basics of the machine:
Presentation of the material:
Model name: Mac Pro
Model identifier: MacPro3, 1
Processor name: Intel Quad - Core Xeon
Processor speed: 2.8 GHz
Number of processors: 2
Total number of cores: 8
L2 cache (per CPU): 12 MB
Memory: 4 GB
Bus speed: 1.6 GHz
Boot ROM version: MP31.006C.B05
Version of the SCM (System): 1.25f4
multiple partitions on a single drive, but they must be partitioned and it can lead to confusion with the rescue partition but I have 4 OS on my Mac Pro and I can boot to one of them. 5 in fact, I have XP as well.
-
I use firefox as my home page. On a regular basis, it tells me im not not using the latest version. When I click on the help icon it says im update. Sometimes a large orange icon appears to the left of the part that says im not not using the latest version. Have uninstalled and downloaded again but still the same.
Help would be appreciatedFirefox is a web browser, not a homepage.
Looks like you have the old www.google.com/firefox/ start page to be the default home page in Firefox before Firefox 4.0 sometime. It is not maintained by Google more so either ignore the message or while in Firefox, go to tools-> Options-> general-> home page section and change your home page.
-
Hi all, I have icloud email and password of the last iphone user, but iphone is blocked and he don't remember security questions. Send the same as apple ID. I have all chansements to unlock in the appstore?
You can not unlock with the AppStore. Request a refund or ask the previous owner to retrieve his password:
Check these items and follow the instructions.
If you have forgotten your Apple - Apple Support ID
-
I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day? I tried to make the old default iphoto but picture still open when I plug in my iPhone?
I tried to make the old default iphoto but picture still open when I plug in my iPhone?
When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar. Do this for all your iPhones. The hook should be unmarked for each device individually.
-
Write a string and an integer and a table all in the same file?
Hello
I am currently it several different types of values with LabView.
I have a shot, a few numbers and several paintings.
Thus, for example, I have a timestamp of the chain, several values of "integer" amplitude of the signal for example, RMS value, frequency and I have several paintings - table of signal, the FFT (PIC and location) values.
Basically, I'm trying to find a way to write all the values in a single file. I can write all the individual types to separate files (so I can write the RMS, amplitude and frequency to a single file, some of the tables in the other)
but is it possible to write a string and an integer and a table all in the same file?Pointers would be much appreciated,
Thank you
Paula
Your file will be all text... any format in a table of text, to build as a single table, "table chain worksheet", to write to the file.
(I'm sure this has been on the forums before... a search it would have thrown upward)
-
How to record the numbers and words in the same file
Hello:
I did a vi where I record the spectrum and its integration in different positions of a two-dimensional net. I save the information in two spreadsheet with the comand "write to file measure."
Now, I am recording the parameters initial positions, end X X and space between measurement points. I want a file with two columns that looks like:
Initial position X 1000
final position X 2000
space 100
But idon't know how to save the words and numbers in the same file.
As I have to perform several steps I want to automatically choose the name of the file (something like parameters_1, parameters_2...)
Thank you for your attention
Hi bitxor.
You can use all the functions of the WriteTotext file to write strings to a file.
Then you could set up WriteToMeasurementFile' to add new data to existing files (instead of overwrite or renaming)...
BTW. It is not a good idea to mix lvm files containing arbitrary spreadsheet data!
-
I get the same files repeat KB and how to stop it?
I get the same files repeat KB and how to stop it?
The KB record number are KB2478663 and KB2518870.
Mike
-
I get a window in my toolbar lower repeating me low disk space and when I click it to try to remove the old files, it does nothing... so what should I do to get rid of the files in a "D" file...?
Please perform these steps and the back of the report.
Click Start, click computer, and it will display your hard drives and their letters. Normally C: is your operating system and where everything is stored (user: files, programs, Documents, photos, etc.). The D: is your RECOVERY partition and contains a copy of the first installation of the plant. The D: is small, about 9 to 15 GB, depending on the version of Windows.
For example, my C: displays 306 GB free (unused) 374 GB (hard disk capacity). D: shows 2.11 free 11.5 GB GB. This is normal for HP, Compaq and others. New HP (Win 7) include an E: with less than 1 GB of capacity, to store a program utility tools. These so-called hard disks are in fact partitions installed on a physical hard disk, but not to concern. The c: partition free space is your important answer. BeAware that the D: and E: (if you have the configuration described above, are never to be used as restore points, or your personal files, they are allocated by the manufacturer to support the reinstallation of the operating system.) My example shows that my C: partition made only 68GB used on the disc, 306 GB is free (unused) 374 GB capacity.
(1) report with numbers, and you can be helped.
(2) Vista writes copies ghosts of all your documents (previous versions of the files). These can take many GB.
(3) when he gets less than 20 percent free, you start to have problems with the disk defragmentation. Less than 10% results in critical problems, the problems of performance and for the worse.
(4) if the number of free GB is really a low disk space issue, you need to move some of the large data files (pictures, videos,...) out on CD or DVD.
If it helps, let me know. I'm not a moderator, just a user trying to use simple language to help others.
-
Hello, just set up a new computer laptop and wanted to reinstall CS5 on it. The system is El capitan. When I finished the download and try to install I got a message saying the installation file is damage and saying it s better power eject it. I tried to download several times and in different places. That is wrong. Does´NT CS5 run on El Capitan? Or what else? Thank you.
CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan
-which means you are trying to use CS6 and earlier at YOUR risk of having problems
-You can get CS6 and previous programs to install and run, or you can not (some do, some don't)
-Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html can help
Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)
-also a TEMPORARY security change https://forums.adobe.com/thread/2039319
-the guardian https://support.apple.com/en-au/HT202491
-
I bought the design Adobe CS6 and premium and I need to download my product on my new laptop computer, however I don't have the CD came it with my purchase. How can I download my product without the CD files
Download and Installation Help-
https://helpx.Adobe.com/download-install.html
CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html
You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html
-
When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual. What can I do to be able to open it?
Good luck to the project is corrupted.
Be happy, you have an auto save, even if you've lost some work.
-
Need to re - register a completed form on in Acrobat Reader and keep the same file name.
I did collect a form developed for our client in. They need to access and save it several times without making several versions.
Now that they can open, fill out some fields and "save under" a different file name. They must then go back and edit or add additional information to train at a later date.
He won't let not the re - save the file with the same file name, only "save under". It is not very practical because they will end up with many versions of the same shape and all earlier versions would be obsolete and useless for them.
You must disable the preview in Windows Explorer or close Windows Explorer.
-
I have lightroom 6 and just got a nikon d7200, lightroom now reads the tiff file so I can not download my pictures on lightroom
You really produce TIFF files? If you are, no matter what version of LR read them. Files NAVE, not so much. For NEF files out of this camera, you can either upgrade to the latest 6.4 or CC 2015.4, or you can download the latest free Adobe DNG converter software and use it to convert your files to DNG and import those into LR 5.7.
Back to TIFF format. If you are trying to import those and get a message that the files cannot be read. You will need to change the permissions on the folder that you copy the image to. Change the permissions if you have read and write access.
-
What is the difference between the package from photography to Photoshop and Photoshop on his own? Photography Photoshop has the same capabilities as the single app?
Hello
Greetings!
Photography package to include Photoshop and Lightroom.
However, if you choose Photoshop as a single application you get 20 GB of cloud while in terms of photography, you get 2 GB of cloud.
Plan of photography is less expensive than the only application.
Check here: https://creative.adobe.com/plans
Concerning
Jitendra
Maybe you are looking for
-
some thing to find that was submitted on Safari on a Web site
My daughter applied for a volunteer work on a Web site and she was lost. Something like that can be restored?
-
How can I keep two separate backups?
I have Macbook Pro 10.9.5 (Mavericks). I have been using G-drive to make backups with Time Machine. I intend to travel and I want to add an extra backup to take with me, while leaving the original G drive at home. Yesterday I backed up by the new dri
-
Satellite Pro A300 PSAGDA won't start at all after flash Bios 1.90
I have an A300 PSAGDA-01Y00R. I tried to Flash the bios to version 1.90. He started the process, and when I came back an hour later the cell phone was off. When you turn it on, it has nothing now. I tried removing the battery and running on sector on
-
printer Officejet 4630: keybord on printer
I've just set up the new printer when I get to the IP address, I can't get the keybord to print a 9 I see the 9 on the second line, but when I push the key it gives me just w, x, y and z and will not go to the line with 9 in who am I'm doing wrong
-
When I try to find a LAN printer "directory service is not available" error appeas in XP
My laptop computer, an IBM T43, works in a room separate from the printer. The printer, a HP Photosmart C6180, is connected by a CAT5 cable to the wireless router, a Linksys WRT54G. When the laptop is connected to the printer with a USB cable, it fi