Performance issue Windows 7 after installing a game Psychonauts

Similar Questions

• Is after installing a game on Windows 7, get message msvbvm50.dll is missing, it OK to install?

  I have window 7 and installed a game that says msvbvm50.dll is missing and it hurt window7 to install it to run I have to install msvbvm50.dll?

  Hi Moonjacks,

  Not sure if the runtimes VB 5 works in Windows 7, but you can try this.

  FILE: Msvbvm50.exe installs Visual Basic 5.0 run files:
  http://support.Microsoft.com/kb/180071
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• How can I do I check Windows Update after installing Windows 7 if my internet interface does not work?

  My only internet connection is done by an AT & T USB Connect 881U (mfg Serra wireless). Windows 7 update Advisor indicates that

  I need to check Windows Update after installing Windows 7 to make sure that I have the latest driver for this device, otherwise it can not work.
  If this does not work I have no way of checking Windows Update. Any suggestions of how I could get out of this situation if it happens.

  When all else fails RTFM:

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• SideBySide errors after installing the game.

  0

  I installed a game (netKar pro) in XP 32and now find littered the observer of events with the following errors - these below after simply copying some files from one place to another on the same drive. :

  Event source: SideBySide
  Event category: no
  Event ID: 59 generate activation context failed for C:\WINDOWS\System32\erasext.dll. Reference error message: the operation completed successfully.
  .

  Event source: SideBySide
  Event category: no
  Event ID: 59

  Solves the that partial assembly failed for Microsoft.VC90.MFC. Reference error message: the referenced assembly is not installed on your system.
  .

  Event type: error
  Event source: SideBySide
  Event category: no
  Event ID: 32

  Dependent Assembly Microsoft.VC90.MFC could not be found and last error was that the referenced assembly is not installed on your system.

  Event type: error
  Event source: SideBySide
  Event category: no
  Event ID: 59

  Description:
  Generate activation context failed for C:\WINDOWS\System32\erasext.dll. Reference error message: the operation completed successfully.
  .

  Event type: error
  Event source: SideBySide
  Event category: no
  Event ID: 59

  Description:
  Solves the that partial assembly failed for Microsoft.VC90.MFC. Reference error message: the referenced assembly is not installed on your system.

  Something has been corrupted/crashed? How to get back to where I was?

  System:
  XP Pro. service pack 3
  Abit IN9-32 Max
  BFG GTX 285
  Core 2 duo Intel E6700 2.67GHz
  2G Corsair Twinx DDR2 6400 C 4
  SATA2 Seagate 2x500G
  X-fi Fatality
  850W Coolermaster Real Power Pro RS-850-EMBA
  Reference Dell 2407WFP (1920 x 1200 x 32)
  No overclocking

  

  Hello

  You can try to install the Visual C++ Redistributable package to your computer and check if this helps solve the problem.

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a7b7a05e-6de6-4D3A-A423-37bf0912db84

  Follow the above, given the link to download and install.

  You can ignore the error message in the event log.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• machine is trying to perform a PXE boot after installing updates-"operating system not found error" when PXE boot

  Original title : Aucuns OS after installing updates save broken disk how to reinstall windows vista

  I installed the microsoft updates on my Vista laptop and now the system does not start. Error message is:

  Check the connection of the cable! PXE - MOF:
  exit Intel PXE ROM.

  Operating system not found
  Backup of disks were damaged
  starts from disc downloaded ubuntu, so no problem with a hard drive.
  Cannot access then unable to return to the last good configuration safe mode?
  where can I download vista to reinstall?

  Hello

  Contact your computer manufacturer and ask them to send a set of recovery disks Vista.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Read the responses in these links on the false boot order and network devices.

  http://www.techsupportforum.com/forums/F16/PXE-MOF-exiting-Intel-PXE-ROM-41235.html

  http://www.computerhope.com/issues/ch000706.htm

  See you soon.

• Faulty Windows Update after installing Vista sp1

  I finally got windows vista service pack 1 to install on my computer. After installing, windows update keeps failing when trying to update.

  I get the error code 80246008

  I checked the BITS/Background Intelligent Transfer Service, and he was arrested. It is set as automatic (delayed start). When I try to run it it gives the error 1068: dependency or the group could not start

  Checking dependencies, I found that the COM event system + is thus stopped. It is located in autostart. When I try to start what it gives error 193: 0xc1 and says could not start the system event COM + on the local computer "Windows".

  
  

  I couldn't find anything on the forums which has worked so far

  @umchief only: Riffs on Mike's response, try this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Should I still had windows updates after installing Service Pack 3 on Wndows XP Pro

  I need my latest updates I installed after installing Service Pack 3 on windows xp pro? Because I'm trying to use less memory as possible, and I like 2 gigs of updates before I installed service pack 3. So I can go and remove the latest updates, or should I be?

  See this discussion, Thomas: http://aumha.net/viewtopic.php?f=62&t=33827 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot run Windows 7 after installing Windows XP.

  Hi all, I have a problem with my windows system. I've been a happy user of Windows 7 Professional, but I missed my old XP, then I installed it, and... I can't run Windows 7 now. I can't choose the OS I want to use, but Windows XP runs as all other systems were not. You know, where is the problem? Need help please, if you can.

  Thanks for all the help.

  / Sorry for my mistakes, I'm from the Poland, and I learn again :)

  If you overwrite your Windows 7 partition in the process and you have valid licenses for both systems, then you can try to change the Windows XP boot manager to restore the Windows 7 operating system:

  http://support.Microsoft.com/kb/306559/en-us

  The article is a bit old, but its principles will probably still allow you to dual boot Windows 7 and XP provided you delete the Windows 7 partition when you reinstalled XP.

  While the dual-boot will probably work for you, I think it would be better for you to perform a Windows Anytime Upgrade to Windows 7 Pro or above and then use the XP compatibility mode:

  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  [This assumes that your hardware is fast enough for this.  Most newer computers with Intel Core-2 or better processors have hardware virtualization that will allow the smoothly]

• Cannot re - install windows 7 after installing the new motherboard

  I have a desktop HP, circa 2010, running Windows 7. It it a machine of HP brand with a product windows key that is related to specific hardware when I bought it. The motherboard died last week and the original is not available any more, so I had to install a motherboard ASUS. The PC starts fine until windows recognizes that this is a different material. The system restore fails also in the same Manor.

  Finally, I will restore this original sate is that it works even fines, it is a quad core with 8 GB memory and always runs fast. I have a new SSD drive I want to swap in and upgrade to Windows 10 after I return to a good state.

  I tried to install windows 7 from scratch for the new SSD, but I can't because the product key is a marked HP one and Microsoft does not accept it.

  Is it possible for me to get Microsoft to give me a new key proeduct, after all that I feel that I own this copy of windows and I have the right to re - install windows

  Any suggestions other than buying a new copy of windows is appreciated.

  Thank your for the answers. It looks like another office of Linux for me. Interesting to note that when I did a clean install of Windows 7 original Activation of Windows code on the side of the case worked well.

• Performance issues in XP after removing the Trojan horse, now get "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  I have a Toshiba laptop older, bought in a shop of second hand computer, running XP Home. I have no "Setup disk.

  I get this pop-up message: "the application or DLL C:\Windows\system32\qnwzuc.dll is not a valid Windows image. "Please check this against your installation diskette."

  I also get about 20 pop different messages, like this: Image Bad - Isass.exe, bad Image - OSA9.exe, bad Image - msimn.exe, mbamgui.exe, bad - services.exe and so on

  Just download and run StopZilla, which found Trojan called TDSS and removed him, but these messages are unchanged.

  The computer is much slower that used to be, sometimes turns off automatically.

  If I bought a used computer, no matter who previously owned, the first thing I have with it would be to reinstall the operating system itself. You know not how the computer has been maintained, which has been incorrectly installed, what is missed, what virus and spyware, there may be, etc. I would not live with someone of another errors and problems, possibility of kiddy p0rn, etc, and I would not recommend anyone else to do.

  Your choice of course, but in my opinion, you're playing with fire if you reinstall Windows properly.

• Windows Vista is not starting right after installing the game on Steam

  I had problems with my computer... I recently got a game on Steam, my computer asked me to allow a program. When I welcomed this program it restarted my computer. Now I can't open files or anything either, but Google Chrome works, steam is running. I'm puzzled about what is going on. I don't know if it's a virus or something much worse. Since I welcomed this program I have not been able to start my computer correctly, I have done analyses and a recovery disk to start problems.

  Problem event name: Startup repairV2

  Signature of the problem 01: AutoFailure

  Prob Sig 02: 6.0.6001.18000.6.0.6001.18000

  Prob Sig 03:6

  
  Prob GIS 04:786444

  Prob Sig 05: Corruptvolume

  Prob Sig 06: NoRootCause

  Prob GIS 07:0

  Prob GIS 08:2

  Prob Sig 09: WrpRepair

  Prob GIS 10:87

  OS version: 6.0.6001.2.1.0.256.1
  Local ID: D

  If any of you have any solution please reply or send me an email. Thank you very much.
  -Brian Evnas

  Hello

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Issues of device after installing Windows 7 driver

  I did a clean install and now my drivers do not work. I can't even a network connection, because the network driver could not be found. I can't find what use my backup drive.it has been named D:\ now my cd/dvd drive is named D:\ im so lost! Thank you very much to all those who can help

  * original title - driver problems after reinstall *.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  The computer you are using now if you have an Internet connection with the other > download / save drivers > copy them into Flash Drive > transfer / install on another computer/laptop.

  D: is normally a recovery disc you wouldn't use backup.

  The recovery discs are imaged during the manufacturing process.

  See you soon.

  Mick Murphy - Microsoft partner

• Shutdown of Windows XP after installing an application problem

  Windows xp stop prblm

  I use Windows XP service pack 2
  I install an application, which also initially upwards
  After the installation of this application system could not stop
  Please help me

  Hello tomyjose,

  In addition, I noticed that you're always on service pack 2.

  Is there a reason why we have not been updating to SP3?

  Please use the following link to update the service pack after testung at issue in a clean boot.

  http://support.Microsoft.com/kb/322389

  Best regards

  Matthew_Ha

• Problems of fonts Windows Mail after installing IE9

  I just installed IE9 (March 14, 2011) and started this complex problem. Have Vista Ultimate and use Windows Mail. My default font is Verdana "BOLD" by 10 points. With IE9, it seems much too fat (never appeared like that with IE8). Other fonts appear also too fat.
   
  Another strange aspect of the same problem, at the bottom of the HTML emails, you have three buttons (source combined, called edit): Edit Source overview.  Since IE9, they appear in bold - possibly a slightly larger than before in IE8 font.
   
  My emails stored in folders are in HTML format and on which they are considered, the fonts have changed since installing IE9 on many emails - but not all emails. The fonts must be Verdana 10 pt bold or some other fonts are now appearing in Times New Roman 10 points.
   
  There is a second distinct problem with TNR in Windows Mail. I used TNR 12 pt for an email and after you send the email, it appears therefore as TNR 10 pt when a response is received. Regardless of the source of the answer. I never use TNR 10 pt because it seems too small for most people. Somehow 12pt changed to appear over and over again as 10 pt. And now, he continues this model since I use IE9.

   

  A possible connection to explain to the police by changing the above problem. The default value for IE9 is TNR. [Tools > Internet Options > general tab > Fonts] Shouldn't some Web sites appear in TNR? They ALL appear in some other fonts, possibly Verdana. Affecting TNR font in the results of the accessibility in all fonts in all the websites appearing in TNR. I suspect when I changed the accessibility implementation, that in addition to changing Web sites, it also changed policies to e-mail in Windows Mail. I've since unchecked accessibility and "Fonts" are defined by default (TNR). The stored emails continue to show police TNR, that they do not return to Verdana.

   

  Anyone with similar problems?  Anyone has any ideas how to fix these issues?

  You can set the default font in Internet Explorer to the font you want in the mail via Tools client | Internet Options | Fonts.  Otherwise in IE9, you're stuck with what you have for Windows Mail.  The changes are again DLL located in IE9, and you cannot change these DLLs unless you go back to IE8.  Products of its Microsofts, so that they are accountable for your results.  Yes, delivers his "squarely" by Microsoft.