Cannot run Windows 7 after installing Windows XP.

Similar Questions

• Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  Why my iMac (27 inch, mid 2011) cannot run Windows 10 in boot camp? And if he can't, he would work in something like parallels?

  To be honest, Windows 10 is compatible with your Mac, but Apple does not release from Windows 10 drivers for it. There are various guides on the Internet to install the drivers for Boot Camp Windows 10 even if your Mac is not supported, but follow them at your own risk (don't forget that you won't receive help to make).

  However, you are free to run Windows 10 on a virtual machine. To do this, you can use Parallels, VMware or VirtualBox, but remember that a virtual machine will give you less performance than Windows natively on your iMac. Read-> Windows in BootCamp or Virtual Machine?

• Cannot run Windows 7 SP1 on big HDD (1 TB)

  Hello

  I just realized about this very recent which is apparently now closed:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=275105

  I had same problem with a Toshiba 1 TB drive - I lost on that day and tried at least 10 Windows 7 installs with various behaviours/settings/partitions and still the same result. Cannot run Windows Update.

  I also tried to install Windows 7 SP1 from a DVD and have failed with a catastrophic mistake. I also tried to reformat the disk, the WIndows repair tool (ha!) update and installation when you're standing on my head while reciting the works of Shakespear.

  I gave up in the end and decided to NOT use it as a system disk at all. Instead, I installed Windows 7 on a smaller drive and uses the 1 TB and successfully as a secondary on the same PC drive with a single partition of 1 TB.

  I'm likely to have problems - maybe when the player is more complete and if I might be wise to split into 2 or more partitions?

  I just bought the drive so I can send it if it's going to be a waste of time.

  Thank you very much.

  And what model of Toshiba laptop do you have?

• Cannot run Windows Update from the PC that was previously on a domain.

  Original title: cannot run Windows Update

  I got my PC of my former company with a local login. However, the PC has been joined to a domain. The company no longer exists, but because the PC has submitted to its group policies, I can't run Windows Update. Is there a way around this problem? Thank you.

  Strongly suggest that you contact the administrator of the domain so that it can correct or remove strategies group that are applied to the system.

  In addition, ask the installatiion Media for the edition of Windows installed if you don't have it now.

  MowGreen Services update - consumer safety

• file loss or damage after running automatic updates, cannot run windows without having to re - install

  I am currently running Windows vista 64-bit, but I'm unable to allow automatic updates to run because it results in loss/damage/corruption of files.
  It will install everything as usual and reboot the computer, but instead of windows startup, it reports that windows cannot open because there is a missing or damaged file. The pc is not repairable by placing it in a previous restore point or using the at startup repair shop and I find myself having to reinstall VISTA to get the pc working again. Accordingly, Iam unable to install service packs for Vista or other updates to the system because I don't want to reinstall my computer is there a patch or fix for this error?

  J0seph1ne,
  If you have a question whenever you install an update with the loss of corruption\file then it is possible that you have a problem with your hard drive or with and infection.  You can try the tools\links below.  I suggest you then install just a few updates both to seek only possible that poses a problem.

  Disk error checking

  Get rid of malware

  Can I clean an already infected computer?
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My graphics card cannot run windows 7.

  Before I installed the graphics card, I'm able to run windows 7 perfectly, but when I installed its splash screen only windows 7 graphics card saws, and I try to re-installed windows 7 is not windows 7 manual screen only saws saws when I start windows 7 dvd its saws windows 7 loading files, but not showing me manual screen of windows 7. I only be able to run windows xp.

  Graphics card dealer told me that your computer needs a resolution more but I test on large LCD around 19 to 20 inch lcd, I couldn't NET 7 manual, the problem is still above.
  I have a Nvidia gerfoce gt 520 2 GB DDR3 graphics card, I bought 1 or 1.5 months ago.
  My motherboard is ZXI945-LM4 2 GB of ram, 160 GB of HARD drive.
  Please help me.

  Hi Dounibiligda,

   

  Thanks for posting your question in the Microsoft Community.

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you update your BIOS settings and check the issue:

  BIOS: Frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/BIOS-frequently-asked-questions

   

  Warning of the BIOS:

  BIOS change / oxide of additional metal (CMOS) semiconductor parameters incorrectly can causeserious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists then I suggest you to contact support Nvidia Geforce from the links below:

  http://www.nvidia.com/page/support.html

   

  http://www.GeForce.com/support

   

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

   

• CODE 80072EFE: cannot run windows update

  I had some problems with my computer Windows Vista - Business Office.  Here are the ones I've noticed so far.

  1. I can't run windows update, I get error code 80072efe when I try.

  2. I get continuous popups.  Not all the time and not every time I have a Web browser open.  Sometimes my browser will open only to Web sites at random, for most of the sites trying to sell me something.  I've just close it before it ends even loading and it will be generally fine for awhile.

  3. on my desk, I'm going to organize my icons where I want that they around my screen (work icons in a spot programs, browsers/email in another, records of files on my second monitor, etc.)  Whenever I restart all my icons automatically group either by date or name, and I have to go through the re-organization.  (This one is obviously not really important but I thought that I list all symptoms).

  4. I tried to do a system restore, my computer has a restore point when you start if you press F11 on the scree of HP (or enter the boot menu by pressing F8 or F5, etc) and it will not allow me to enter this screen.  I can't enter the menu start and any other menu it lists on this screen, but the system restore seems to be disabled in some way.

  I tried to run the scan on windows.live.support (or whatever the site is) and he found a lot of problems and 1 question he couldn't solve, so now I'm stuck.  I tried running malwarebytes scan and it does not pick up any viruses.

  Any suggestions?

  Launch TDsskiller (Rootkit removal tool)

  http://support.kaspersky.com/downloads/utils/tdsskiller.zip.

  After that, restart the computer and check for updates

  And if there is a pop - up use the scanner found at http://safety.live.com

• Cannot run Windows 10

  I don't understand what that means. He told me to look at a problem of compatibility. I clicked on the overview report it says "you're good to go and my PC runs Windows 10. I have all green checkmarks. The only thing I don't have on my PC's touchscreen. My monitor is not like this. So, I don't know what the problem is. I had checked my laptop and I'm able to download Windows 10, because it has Windows 8. My computer has Windows 7. If the computer is Windows 7 and not Windows 8? I didn't download Windows 8 at the time because I go to school and I didn't want to cause disruption with my studies at school.

  I want to download Windows 10 before the date, but I don't know what to do.

  Please help me.

  Thank you

  Carrie.

  Try to upgrade manually:

  If the Upgrade Wizard of Windows 10 becomes blocked or unresponsive to 99%, wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

  If you encounter an error about enough space to perform the upgrade, see the instructions:

  How to install Windows 10 on devices with limited space

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1: Using the media creation tool

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  Select upgrade this PC now and then click Next

  

  Option 2: upgrade using the file ISO for Windows 10.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
  • Support your default BIOS reset BIOS.
  • Check if there BIOS updates available for your system, and then to apply them.
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.

• Cannot run windows applications 8 on my computer toshiba satellite laptop

  Hello

  I have a Toshiba satellite laptop and I recently installed windows 8 on.
  but when I try to run windows store applications such as mail, people, message the app is shown as it loads then it is hidden.
  so I can't run any application, it disappears immideatly and does not load.
  could you help me solve this problem.
  Thank you!

  Hi Benjamin,

  For the question links to applications, please try the following steps.

  Method 1:

  You can see the steps from the following link.

  What to do if you have problems with a soft

  Method 2:

  Please check if a proxy is enabled, if necessary, turn it off. Follow the steps below:

  (a) select the Internet Explorer tile on the start screen.

  (b) turn left click on the settings icon in the lower right.

  (c) select Show the desktop. You will be guided to desktop Internet Explorer.

  (d) select settings (speed) icon in the upper right.

  (e) select Internet Options in the menu drop-down.

  (f) go to the connection tab on LAN settings from the lower right of this window.

  (g) uncheck the box that says "use a proxy server for your LAN settings.

  Please post with the State of the question.

• CANNOT RUN WINDOWS UPDATE ON VISTA

  So I can't update anything on my computer that uses windows update, its been like this for about 3 days now, I tried to figure out how to solve this problem, but I do not receive either where can someone please help?

  Windows Security Essentials gives me the error code 0 x 80004002

  In addition to the information requested, try these troubleshooting of beginning steps and let us know the results from them.

  Clean boot your PC, and then run Windows Update.

  Reset the Windows Update components

  Perform operations of KB883825

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot run windows 7 64 bit, but the computer is capable.

  I ordered the online download of windows 7 64 bit by accident.  My computer is capable of running windows 7 64-bit, however, I'm currently running vista 32 bit.  Is there a way can I return my order online for the 32 bit, or do I have to download the 64-bit version and has two operating systems on my computer?

  We are dealing with Windows Update features in this forum, not the upgrade of Windows. Transfer your question here http://social.answers.microsoft.com/Forums/en-US/w7install/threads or contact Support MS. ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• Blue screen, cannot run Windows Update

  I was browsing Reddit when all of a sudden my laptop decided NOPE and closes everything down to make an update. It was 03:00 so I wasn't thinking straight and closed on the rise and went to bed. The next day, while in the class my phone showed me a blue screen with some writing for everything... long enough not to read what was then asked if I wanted to start in different security modes. I thought that this could be because I interrupted an update and I tried to run Windows Update, but it will still not open.   I can't access anything whatever, and I have a paper in four days... Help, please!

  We need the DMP file because it contains the single record of the sequence of events that led to the accident, what drivers have been loaded, and what has been loaded.

  
  

  WE NEED AT LEAST TWO FILES DMP TO SPOT TRENDS AND TO CONFIRM THE DIAGNOSIS.

  
  

  If you're overclocking (pushing components beyond their design) return you to default at least until the crash is resolved. If you don't know what it is that you're probably not overclocking.

  You may be able to get the DMP files without crashing by booting in SafeMode (F8) with networking.

  If you are overclocking stop.  (chances are that if you are unsure if you are, you are not)

  To allow us to help you with symptoms BSOD on your computer, download the contents of your folder "\Windows\Minidump".

  The procedure:

  * Copy the contents of \Windows\Minidump to another location (temporary) somewhere on your machine.

  * Zip up the copy (compress)

  * Please download to a service like Skydrive or "Rapidshare" to share files and put a link to them in your answer.

  Link to find out how to download below.

  http://www.WikiHow.com/use-SkyDrive

  To ensure the minidumps are enabled:

  * Click Start, in the search box, type: sysdm.cpl, press ENTER.

  * On the Advanced tab, click Startup and recovery... Settings button.

  * Make sure that automatically restart is unchecked.

  * Under the writing debugging information header, select image partial memory (256 KB) in the list box drop-down (varies from 256kb).

  * Ensure to that small Dump Directory is listed as % systemroot%\Minidump.

  * OK your way out.

  * Reboot if changes have been made.

  Please also run MSinfo32 and download the output as well.

  To run MSinfo32 please go to start > run > MSinfo32

  Go to 'file', 'save' and download the PDF is saved with the DMP

  System specs are extremely useful then please include everything you know.

  
  

  Blue screen view and that crashed are often wrong and should only be used in case of emergency...
  
  
  Troubleshooting of Windows/source here
  You can learn more about BSOD here
  You will learn how to test your memory ici 
  An effective question gets help more quick read how here
  Pilot auditor-stalking a GIS behave driver here
  
  
  Co-written by JMH3143
  Team Zigzag3143.com  

• Cannot run Windows Explorer using the interactive services detection

  Hello

  I have the tool using the interactive services detection to display applications. I have to refrain from using the Terminal Server services for the moment and the DSI is the only option I have. Now the problem is, this tool must run Windows explore periodically as well as other applications Viz Notepad, wordpad. It shows notepad and wordpad but always fails to open windows Explorer. Any ideas on that?
  PS: everything what I described above works great with the Terminal Services
  Thank you
  Madhu

  Hi Madhu,

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 security TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Cannot run Microsoft games after upgrading Windows 8 Pro

  After you have installed Windows 8 Pro I found my old Microsoft games (Solitaire, etc.) in the Windows.old file and used successfully and Favorites to the start menu.  The next day (after several Windows updates) they would not start in the start menu or from the executable file in the Windows.old folder. Tried to restore the (only) listed restore point but received a message that it cannot restore.  Tried the troubleshooting of compatibility without success. Uninstall the updates and restarted the resolution of compatibility issues, with the same results.  Have right click on executable, open properties and set to run in Windows 7 compatibility mode and run as Administrator without success.  How can I get my games to run on this POS?

  Hi Bruce,.

  Thanks for the reply.

  I suggest you check this question in another user account if you have more you can create a user account by following the steps in the link below.

  Creating a user account:

  http://Windows.Microsoft.com/en-GB/Windows/create-user-account#create-user-account=Windows-8

  Let us know the status of the issue.

• After re-formatting computer, cannot run Windows Update on Vista

  Well, I recently re-formatted my computer. I bought my computer through Aaron, and they never gave me a recovery disk, until a few weeks ago. My computer was originally came with Windows XP and now I have Vista. Now, I can't start my windows update. It does not give me an error code it keeps just to the search and the search with nothing else coming. I was also playing Second Life before I changed to Vista, and now I can not play because it says that my drivers may need to be updated or reinstall. Other tests show my everything works fine, but I can't find the updates for one of my drivers. I can't get the right code for Vista because I don't have the code for it. I have a very hard time with this. I need some kind of help. Please, I beg you!

  * original title - I can't run my Windows Update/Driver problems *.

  If you do not have the product key for Vista, we can not help you on the PK if you ever had a product given to you key.

  If you had one and he lost, read this:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista operating system is still active and running, use one of the programs above to find your product key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For driver problems:

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  For Windows Update problems:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  We do not know how Vista has been installed on your machine.

  Reinstall the access path is normal: Reinstall XP (because that's what was originally on it) > then go to Vista.

  I suggest that return you to where you had installed Vista and ask them to install/repair properly.

  Cheers.

  Mick Murphy - Microsoft partner