Performance issues at the opening of business rule
HelloWe work in collaboration with Hyperion version 9.2.1 and we have performance issues when opening the business rules. I have analyzed the issue and discovered that it has something to do with the assignment of access privileges to the rule.
The authorisation scheme looks like as follows:
User A is assigned to the group G1
User B is assigned to the Group G2
Group G1 is assigned to the XYZ group
Group is assigned to the XYZ group G2
Group XYZ is the owner of the 'basic user' delivery to the planning application.
Without attributing any unrestricted access the rule company opens immediately.
By assigning the privilege to access the group G1/G2 (post or get) the business rule opens immediately.
By assigning access privilege to the XYZ group the business rule opens after 2-5 minutes.
Anyone has an idea why this happens and how to fix this?
Kind regards
ULI
Edited by: user13110201 the 12.05.2010 04:31
This was a problem with the business rules for quite some time. Oracle made front and rear markets in later versions than yours; and they have issued patches address, if it is not completely solved the problem. Finally things seem to be much better in 11.1.1.3, although YMMV.
Tags: Business Intelligence
Similar Questions
-
How to change the values of business rule at run time?
Hello
I'm using Oracle 11g SOA. I did a BPEL process that uses Business Rule. Now the BPEL process is deployed with business rules so how to change the value of the business @runtime rule. I don't want to change the value @design time and deploy the code again.
Is there a console or the portal? as Oracle BAM has own url? What is the url of Business Rule Manager?
Thank youCan you check is the deployment of "composer" is in Active state.
In the weblogic administration console, navigate to Environment--> Servers--> SOA_SERVER1--> Deployments (tab) on the left side of the menu.
Thank you
Vijay -
The changes of business rules journal
Hi all
Are there any newspaper where we can see the following:
Creation of business rules
thanks in advance.
Changes to rules of
We are on 11.1.2 (and use the Manager of calc for the changes and the creation of business rules)
Concerning
ElegantYou can query the relational table of calc CALCMGRRULES Manager, the table has columns for the owner, date created, modified by, modified the date.
See you soon
John
http://John-Goodwin.blogspot.com/ -
SmartView lets admins run the Admin of business rules version?
Jake wrote: having two versions of the same business rule. Accepting a guest of execution for the "user" of the business rule version. Another fixed on all the level zero for the 'admin' of the business rule version.
Two other very simple questions:
(1) Smartview allows users to run the version of the Admin of business rules? I don't want regular users to run the version of the Admin. (Of course, Add-in Essbase Excel me does not run business planning rules.)
(2) how can I write a script Maxl "Admin version of business rules? Every night, I need to run a calc for all level zero members of Windows Scheduler cost center.
Thanks in advanceHello
Just set the security on the business rule, don't give admin access to the business rule.
You can also use the command line launcher to run batch scripts business rules, have a read of the business rules CmdLnLauncher.exe for more information.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Issue when executing the planning of business rules
Hello
I get the following error when trying to run a Planning Business Rules of EPMA production environment. The same rules of business work without any problem in UAT which is exactly in line with the production.
Getting the following message while starting business rules:
Error detected while trying to perform the work: naming rules
Newspaper:
[ACTIVE] ExecuteThread FATAL: '2' for queue: com.hyperion.planning.calcmgr.HspCalcMgr '(self-adjusting) weblogic.kernel.Default"- cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
-Cannot run validateRule(). An error occurred when executing the specified calc script. See the log for more details.
FATAL Thread-2352 calcmgr.launch - Server/Application/base of data: localhost Business Rule Name: user: M05 FP data planning. Exception: com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
com.hyperion.planning.InvalidCalcException: an error occurred when executing the specified calc script. See the log for more details.
Please could someone tell if you're aware of something like this?
Thank you
JeanRemove essbase Server console of Regional service,
Add Server Essbase with IP address or host name and try again. -
The behavior of business rule when you deploy a new version
Hi Experts,
My client is using bpm11g, they asked when you deploy a new version of bpmn process with build-in the business rule, what will happen to the existing and update of the composer?
The old rule will be updated with the new version or will be preserved as it was? If the latter is true, when the new version will be effective?
Best regards
Hello
What has to happen, is it time that you changed a BR in the composer, that a redeployment of the composite does not replace the amended administrative rules.
You can / should export your composite of EM then you JDeveloper project reflecting changes in the BR in composer: using Oracle SOA composer with Oracle Business Rules - 11 g Release 1 (11.1.1.6.1).
Kind regards
Martian -
Error of the Hyperion select business rule planning task list
Hi all
I created an application of planning (11.1.2.3) with two planning types. I have lists of tasks for each of them.
The problem occurs when I assign to a task, a business rule and this business rule belongs to the second type of plan, the selection list appears empty and when I go back and select the type of plan fist again, empty the list of continuous selection.
Is there a bug in the planning (I guess)? Is there no work around for this problem?
Thanks in advance.
Kind regards
John
Hello
To-do lists are not specific to the Type of Plan.
You assign objects to tasks, and they can be from anywhere in the same application.
When you say the selection list what are you referring? A command prompt that you have in your rule? Or when you try to assign your rule to the task?
I've implemented on 11.1.2.3 without any problem.
Have you done that you have deployed your calc rule manager?
Thanks Anthony
-
Amendment to the execution of business rules
Hi is there any place where the customer can modify the runtime business rules? I don't want to implement BR in the code, I want to make it dynamically.You can use the SOA composer to do the same thing...
URL: http: / /
: /soa/composer. Mark recognition appropriate as "useful" or "right answer", if your problem is resolved.
Concerning
Albin I
[http://www.albinsblog.com/] -
Input string in the text through business rule beam
Hello, I have a problem I can not enter a string in the text bar using the equation like membername = 'chain' or % membername % = @alias("January"); He entered nothing in the cell or replaces the existing value with #missing, on the other hand I can enter numbers here, but essbase interpreter number to a string. like 1 = AndyEssbase can store only numerical data and business rules are run on the essbase database.
See you soon
John
http://John-Goodwin.blogspot.com/ -
Performance issue with the submodels
Hello
I'm working on submodels and my requirement needs only one main calling location several specific submodels (a location may have several own submodels, e.g.: US_subtemp1, US_subtemp2, US_subtemp3... in the same way to other locations).
I would like to know is there any performance issue associated with calls in the submodels and on how this decrease in performance can be minimized.
Kind regards
ArvindUse of the submodels with components imported alongside repeated sections in the main template layout is not recommended when the number of repetitions is high and the size of the document is large. BI Publisher optimize the xsl transformation internally, but it is not applied to xsl inside models of void.
One of the extreme scenario is a main model set only a repeating section that matter a submodel of the header and the footer.
A body of the repeating section is defined in the subtemplate. In this scenario, there is no xsl optimization made and you can easily see some differences in performance.As long as you don't need to repeat the layouts of submodels, you don't need to worry about this performance issue.
Thank you
Shinji -
performance issue with the Oracle SQL query
Dears
Good evening
I am new to begin to use Oracle SQL, I have a sql query which takes longer to run in production.
Each table in the query contains 1.2 million records and DBA suggested using the "Oracle - tips. I don't have good knowledge on this subject and the difficulties to implement this advice for imrpovise performance. In the product the jobs Informatica are failed and stuck with this problem of query performance.
I ask this forum for an emergency for me to solve this problem by using "advice". kindly help me.
SELECT
CASE.ID,
CASE. DTYPE,
CASE. Version
CASE. EXTERNAL_REF,
CASE. CREATION_TS,
RQ. TYPE
Of
PAS_CASE CASE,
AS_REQUEST RQ,
CN PAS_CONTEXT
where rq.case_id = case.id
AND rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.)
and CN. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
AND CAST (CN. CREATION_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
AND
CAST (CN. CREATION_TS AS DATE) < TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)-2nd request
SELECT
RA.ID,
RHEUMATOID ARTHRITIS. Version
RHEUMATOID ARTHRITIS. REQUEST_ID,
RA.NAME,
RHEUMATOID ARTHRITIS. VALUE,
RHEUMATOID ARTHRITIS. LOB_ID,
RHEUMATOID ARTHRITIS. DTYPE,
RHEUMATOID ARTHRITIS. CREATION_TS,
TASK. MAIN_REQ_TYPE
PAS_REQUESTATTRIBUTE RA
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
) task
on the RA REQUEST_ID = task.ID
and RA.ID between $$ LOW_ID1 AND $$ HIGH_ID1
UNIONSELECT
RA.ID,
RHEUMATOID ARTHRITIS. Version
RHEUMATOID ARTHRITIS. REQUEST_ID,
RA.NAME,
RHEUMATOID ARTHRITIS. VALUE,
RHEUMATOID ARTHRITIS. LOB_ID,
RHEUMATOID ARTHRITIS. DTYPE,
RHEUMATOID ARTHRITIS. CREATION_TS,
MAIN_REQ. TYPE
PAS_REQUESTATTRIBUTE RA
Join
(
Select rq.id, rq.type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
on the RA REQUEST_ID = main_req.ID-3rd request
SELECT
RB.ID,
RB. DTYPE,
RB. Version
RB. TYPE,
RB. CREATION_TS,
RB. TASK_ID,
RB. Color
RB. GLOBAL_RESULT,
TASK. MAIN_REQ_TYPE
Of
PAS_RESULTBLOCK RB
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
) task
We rb.task_id = task.ID
and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1
and RB. TYPE is not null
and RB. TYPE IN
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
UNION
SELECT
RB.ID,
RB. DTYPE,
RB. Version
RB. TYPE,
RB. CREATION_TS,
RB. TASK_ID,
RB. Color
RB. GLOBAL_RESULT,
TASK. MAIN_REQ_TYPE
Of
PAS_RESULTBLOCK RB
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
) task
We rb.task_id = task.ID
and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1
and RB. TYPE is nullSELECT
RB.ID,
RB. DTYPE,
RB. Version
RB. TYPE,
RB. CREATION_TS,
RB. TASK_ID,
RB. Color
RB. GLOBAL_RESULT,
TASK. MAIN_REQ_TYPE
Of
PAS_RESULTBLOCK RB
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
) task
We rb.task_id = task.ID
and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1
and RB. TYPE is not null
and RB. TYPE IN
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
UNION
SELECT
RB.ID,
RB. DTYPE,
RB. Version
RB. TYPE,
RB. CREATION_TS,
RB. TASK_ID,
RB. Color
RB. GLOBAL_RESULT,
TASK. MAIN_REQ_TYPE
Of
PAS_RESULTBLOCK RB
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
) task
We rb.task_id = task.ID
and rb.ID between $$ LOW_ID1 AND $$ HIGH_ID1
and RB. TYPE is null
-4th query
SELECT
RI.ID,
UII DTYPE,
UII Version
UII RESULTBLOCK_ID,
RI.NAME,
UII VALUE,
UII UNIT,
UII Color
UII LOB_ID,
UII CREATION_TS,
UII SEQUENCE,
UII DETAILLEVEL,
RES_BLK. MAIN_REQ_TYPE
Of
RI PAS_RESULTITEM
Join
(
Select
rb.ID, rb. TYPE rb_type, task. TYPE as the task_type, task. pas_resultblock rb main_req_type
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between the 20141999999999999 AND 20141800000000000
) task
We rb.task_id = task.ID
and rb.ID between the 20141999999999999 AND 20141800000000000
and RB. TYPE IN
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
) res_blk
On ri.resultblock_id = res_blk.ID
where IN RI.NAME
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and RI.ID between the 20141999999999999 AND 20141800000000000
and RI.NAME is not null
UNIONSelect
RI.ID,
UII DTYPE,
UII Version
UII RESULTBLOCK_ID,
RI.NAME,
UII VALUE,
UII UNIT,
UII Color
UII LOB_ID,
UII CREATION_TS,
UII SEQUENCE,
UII DETAILLEVEL,
RES_BLK. MAIN_REQ_TYPE
of pas_resultitem ri
Join
(
Select
rb.ID, rb. TYPE rb_type, task. TYPE as the task_type, task. pas_resultblock rb main_req_type
Join
(
Select tsk.ID, tsk. TYPE, main_req_type main_req.
of tsk PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between the 20141999999999999 AND 20141800000000000
) task
We rb.task_id = task.ID
and rb.ID between the 20141999999999999 AND 20141800000000000
) res_blk
On ri.resultblock_id = res_blk.ID
where RI.ID between 20141800000000000 20141999999999999 AND
and RI.NAME is null-REQUEST OF 5HT
SELECT
TSK.ID,
TSK. Version
TSK. DTYPE,
TSK. CASE_ID,
TSK. TYPE,
TSK. CORRELATION_ID,
TSK. INITIATOR,
TSK. EXECUTOR,
TSK. CATEGORY,
TSK. PARENT_CONTEXT_ID,
TSK. CREATION_TS,
MAIN_REQ. MAIN_REQ_TYPE
Of
TSK PAS_REQUEST
Join
(
Select cn.id as context_id, rq. TYPE main_req_type
of PAS_REQUEST rq
Cn PAS_CONTEXT
where rq.id = cn.request_id
and rq. DTYPE = "MAINREQUEST."
and rq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and rq.ID between the 20141999999999999 AND 20141800000000000
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk. DTYPE in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.ID between $$ LOW_ID1 AND $$ HIGH_ID1
UNION
Select
MREQ.ID,
MREQ. Version
MREQ. DTYPE,
MREQ. CASE_ID,
MREQ. TYPE,
MREQ. CORRELATION_ID,
MREQ. INITIATOR,
MREQ. EXECUTOR,
MREQ. CATEGORY,
MREQ. PARENT_CONTEXT_ID,
MREQ. CREATION_TS,
MREQ. TYPE
of PAS_REQUEST mreq
Cn PAS_CONTEXT
where mreq.id = cn.request_id
and mreq. DTYPE = "MAINREQUEST."
and mreq. TYPE in
(
'bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ',' bgc.tbf.repair.vap', ' bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ',' bgc.cbm ',' bgc.dar.e2etest.preparation', ' bgc.chc.polling '.
)
and cn. STATUS ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and CAST (cn. END_TS AS DATE) > = TO_DATE ('2014-05-06 00:00:00 ',' ' YYYY-MM-DD HH24:MI:SS)
and CAST (cn. END_TS AS DATE) < = TO_DATE ('2014-05-06 23:59:59 ',' ' YYYY-MM-DD HH24:MI:SS)
and cn.ID between the 20141999999999999 AND 20141800000000000
and mreq.ID between the 20141999999999999 AND 20141800000000000
Tips will be may not be necessary (proportional to the cardinalities need)
Select pc.id, pc.dtype, pc.version, pc.external_ref, pc.creation_ts, rq.type
from pas_case
as_request rq,
CN pas_context
where rq.case_id = pc.id
and rq.id = cn.request_id
and rq.dtype = 'MAINREQUEST. '
and rq.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',
'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and cn.creation_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')
and cn.creation_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">=>
-2nd request
with
main_request as
(select / * + materialize * /)
CN.ID as context_id, rq.type as main_req_type
of pas_request rq
Join
CN pas_context
On rq.id = cn.request_id
and rq.dtype = 'MAINREQUEST. '
and rq.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.chc.polling',
'bgc.tbf.repair.vap ',' bgc.dar.e2etest', ' bgc.dar.e2etest.intermediate.execution ',.
'bgc.cbm ','bgc.dar.e2etest.preparation '.
)
and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')
and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">=>
and cn.id between 20141800000000000 and 20141999999999999
and rq.id between 20141800000000000 and 20141999999999999
)
Select ra.id, ra.version, ra.request_id, ra.name, ra.value, ra.lob_id, ra.dtype, ra.creation_ts, task.main_req_type
of pas_requestattribute ra
Join
(select tsk.id, tsk.type, main_req.main_req_type
from pas_request tsk
Join
main_request main_req
On tsk.parent_context_id = main_req.context_id
and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.id between $$ low_id1 and $$ high_id1
) task
We ra.request_id = task.id
and ra.id between $$ low_id1 and $$ high_id1
Union
Select ra.id, ra.version, ra.request_id, ra.name, ra.value, ra.lob_id, ra.dtype, ra.creation_ts, main_req.type
of pas_requestattribute ra
Join
main_request main_req
On ra.request_id = main_req.context_id
-3rd request
Select rb.id, rb.dtype, rb.version, rb.type, rb.creation_ts, rb.task_id, rb.color, rb.global_result, task.main_req_type
of pas_resultblock rb
Join
(select tsk.id, tsk.type, main_req.main_req_type
from pas_request tsk
Join
(select cn.id as context_id, rq.type as main_req_type
of pas_request rq
Join
CN pas_context
On rq.id = cn.request_id
and rq.dtype = 'MAINREQUEST. '
and rq.type in ('bgc.dar.vap.resolution.advice ','bgc.dar.e2etest.execution ',
'bgc.tbf.repair.vap ','bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ','bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')
and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">=>
and cn.id between 20141800000000000 and 20141999999999999
and rq.id between 20141800000000000 and 20141999999999999
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.id between $$ low_id1 and $$ high_id1
) task
We rb.task_id = task.id
and rb.id between $$ low_id1 and $$ high_id1
where the type is null
or (type is not null
type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution ', ' bgc.tbf.repair.vap',
'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
)
-4th query
Select ri.id, ri.dtype, ri.version, ri.resultblock_id, ri.name, ri.value, ri.unit, ri.color, ri.lob_id.
RI.creation_ts, RI. Sequence, RI. DetailLevel, res_blk.main_req_type
of pas_resultitem ri
Join
(select rb.id, rb.type as rb_type, task.type as task_type, task.main_req_type)
of pas_resultblock rb
Join
(select main_req_type, tsk.id, tsk.type, main_req.)
from pas_request tsk
Join
(select cn.id as context_id, rq.type as main_req_type
of pas_request rq
Join
CN pas_context
On rq.id = cn.request_id
and rq.dtype = 'MAINREQUEST. '
and rq.type in ('bgc.dar.vap.resolution.advice ','bgc.dar.e2etest.execution ',
'bgc.tbf.repair.vap ','bgc.dar.e2etest ',.
'bgc.dar.e2etest.intermediate.execution ','bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')
and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">=>
and cn.id between 20141800000000000 and 20141999999999999
and rq.id between 20141800000000000 and 20141999999999999
) main_req
On tsk.parent_context_id = main_req.context_id
and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.id between 20141800000000000 and 20141999999999999
) task
We rb.task_id = task.id
and rb.id between 20141800000000000 and 20141999999999999
and rb.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',
'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
) res_blk
On ri.resultblock_id = res_blk.id
and ri.id between 20141800000000000 and 20141999999999999
where ri.name is null
or (ri.name is not null
and ri.name in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',
'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
)
-5th application
with
main_request as
(select / * + materialize * / )
mreq.ID, mreq.version, mreq.dtype, mreq.case_id, mreq.type, mreq.correlation_id, mreq. Initiator, mreq. Executor,
mreq. Category, mreq.parent_context_id, mreq.creation_ts, mreq.type
of pas_request mreq
Join
CN pas_context
On mreq.id = cn.request_id
and mreq.dtype = 'MAINREQUEST. '
and mreq.type in ('bgc.dar.vap.resolution.advice ',' bgc.dar.e2etest.execution', ' bgc.tbf.repair.vap',
'bgc.dar.e2etest ',' bgc.dar.e2etest.intermediate.execution', ' bgc.cbm ',.
'bgc.dar.e2etest.preparation ','bgc.chc.polling '.
)
and cn.status in ('FINISHED', 'CANCEL', 'TIMEOUT', 'ERROR')
and cn.end_ts > = to_timestamp ('2014-05-06 00:00:00 ',' yyyy-mm-dd hh24:mi:ss')
and cn.end_ts<= to_timestamp('2014-05-06="" 23:59:59.999999','yyyy-mm-dd="">=>
and cn.id between 20141800000000000 and 20141999999999999
and mreq.id between 20141800000000000 and 20141999999999999
)
Select tsk.id, tsk.version, tsk.dtype, tsk.case_id, tsk.type, tsk.correlation_id, tsk.initiator, tsk.executor,
TSK. Category, tsk.parent_context_id, tsk.creation_ts, main_req.main_req_type
from pas_request tsk
Join
main_request main_req
On tsk.parent_context_id = main_req.id
and tsk.dtype in ('ANALYSIS_TASK', 'DECISION_TASK')
and tsk.id between $$ low_id1 and $$ high_id1
Union
SELECT id, version, dtype, case_id, type, correlation_id, initiator, executor,
category, type parent_context_id, creation_ts
of main_request
Concerning
Etbin
-
Performance issue with the method extract in 11g
I am new to Oracle XML DB. I'm having a problem with an example simple Java application designed to test the response time. I can't find an answer to this question.
It takes about 1/2 second, whenever my Java client makes a call to the method "extract" of XMLType. Extract is called 3 times for each row returned in a result set. It takes 1 1/2 seconds to process 1 line. With a result set of 55 lines, it takes about 1 1/2 minutes to process the entire result set.
It seems to me that an appeal must be get done to retrieve the data from the server to each snippet of time is called. This performance is unacceptable and will not evolve. This seems to be a lazy loading problem that could be treated with the configuration; but I still need to find something specific documented.
Is there something that can be done to solve this problem or is it typical performance?
I use a binary XML storage. I created a XMLIndex; but it made no difference. Does not seem like an indication that much of a difference, since the problem occurs when you access XML different values in the same line...The extract method is implemented in the classes of the JAVA API provided by the Oracle client installation.
Just to clarify things, this forum is related to a feature in the Oracle database. The API you mentioned and you use are provided by another group within Oracle (I think). In addition, the used API .extract does its job fully without communicating with the DB. You can check this to hard code in an XML response and disconnect your computer from the network before you run the logic of analysis and it would continue to operate.
The fact that this method is removed must have something to do with its inefficiency
The disapproval that I mentioned is only in what regards the SQL in the Oracle DB. As noted above, the used API lives under a different set of rules, so I can't speak to that. There is probably a forum for the API, but I haven't been looking.
Back on topic, a possible rewrite for your SQL statement is (untested)
select aex.APPLICATION_NAME, aex.VERSION, aex.EVENT_TYPE, xt.sendingSite, xt.receivingSite, xt.eventID from AUDITED_EVENT_XML aex, XMLTable('/*/MSH' PASSING aex.xml_event_content COLUMNS sendingSite VARCHAR2(20) PATH 'MSH.4/HD.2', receivingSite VARCHAR2(20) PATH 'MSH.6/HD.2', eventID VARCHAR2(20) PATH 'MSH.10' where EVENT_TYPE = ?
If you have problems with this, just after a small sample XML and someone can twist where I was wrong.
-
Reliable message of guard - performance issues - of the data?
Hello, we are on 10.2.0.3 (I know, time to upgrade, just can't right now). Data Guard is in place, in AVAILABILITY of maximum production work that was ongoing for 3 years once a week with no problems started taking 10 + hours. He used to take 2 hours Max checked, everything, nothing has changed. Ran AWR report and see that the high wait event is a RELIABLE MESSAGE:
Is - this Data Guard? What can we do to fix this? I dropped the day before, tried to re - run this job and still have high reliable message:Top 5 Timed Events Event Waits Time(s) Avg Wait(ms) % Total Call Time Wait Class CPU time 45,270 97.5 *reliable message 2,655 534 201 1.1 Other* db file sequential read 199,278 366 2 .8 User I/O db file scattered read 122,914 287 2 .6 User I/O LGWR wait on LNS 35,511 209 6 .4 Network
I don't understand much about Metalink. If I dropped the day before, newspapers are not speeding it more, shouldn't that have improved performance? Or should I disable the configuration to test any scenario Data Guard in this case? In the last configuration disabeling required re-buillding DG however. Please notify. What is the reliable message? Thank you!Top 5 Timed Events Event Waits Time(s) Avg Wait(ms) % Total Call Time Wait Class CPU time 11,490 98.7 reliable message 804 77 96 .7 Other db file scattered read 92,969 34 0 .3 User I/O db file sequential read 17,596 25 1 .2 User I/O log file parallel write 13,268 11 1 .1 System I/O
My bad. You are right, they are 10MB.
I have galanced bytes and somehow added an extra 0.
The 200 MB comes from the query - 'optimal_logfile_size = 201.
The rule of the 20 minutes of CKPT is good, but sometimes the databases have a peak period, which is only about half a day.
10 MB is a bit small, I consider what makes them great. At least 100 MB.
I remember you, you had the 'Data Guard - total loss of primary education"question just now.
Best regards
mseberg
-
How to kill the process of business rule?
I have a series of business running in the background the same rule and are in the State in planning treatment. There is no session in the environmental assessments of these rules. We tried to restart application ESSSVR and even restarted the Essbase server, but it has not solved the problem.
Can someone help me on these rules the Web for compensation planning?If there are no sessions in environmental assessments, then rules will not run without a doubt and a planning table must be updated.
Go to the repository relational planning applications, go to the HSP_JOB_STATUS table, replace RUN_STATUS with the value of 2 for jobs that are running.See you soon
John
http://John-Goodwin.blogspot.com/ -
Performance issue with the query when join OKS and tables of the IB
Hello
I'm developing an integration for the automation of RMA through repair. The type of repair order is based on the details of the guarantee. This check must be made for each record.
Request for detailed below, I wrote, but it of a long way and slows down my program. Without this validation, it works perfectly.
The problem is the join of tables with OKS IB, he kills performance. I also try to my side,
any suggestion or help is appreciated. Here's the query in the program:
SELECT DISTINCT (TYPE |) '-' || service | '-' || status)
IN v_war_details
FROM (SELECT TO_NUMBER (linesb.line_number) line,
DECODE
(fnd_profile. VALUE
('OKS_LINE_MIRR_NAME_OR_DESC'),
'DISPLAY_NAME', sysitems.concatenated_segments,
"DISPLAY_DESC", sysitems.description
) service.
linestyletl.NAME TYPE,
status of ststl.meaning,
start_date linesb.start_date,
linesb.end_date end_date,
oks_misc_util_web.duration_period
(linesb.start_date,
linesb.end_date
) DURATION OF,.
TimeUnit.unit_of_measure_tl period
Of okc_k_lines_b linesb,.
okc_k_lines_tl linestl,
okc_line_styles_b linestyleb,
okc_line_styles_tl linestyletl,
okc_k_headers_all_b hdr,
oks_k_lines_b slines,
okc_k_items kitems,
mtl_system_items_b1_kfv sysitems,
okc_statuses_b stsb,
okc_statuses_tl ststl,
mtl_units_of_measure_tl timeunit,
okc_lookups_v rentype,
Glu mtl_units_of_measure_tl
WHERE linesb.cle_id IS NULL
AND linesb.ID = linestl.ID
AND linestl. LANGUAGE = USERENV ("LANG")
AND linesb.lse_id = linestyleb.ID
AND linesb.lse_id (1, 12, 14, 19, 46)
AND linestyleb.ID = linestyletl.ID
AND linestyletl. LANGUAGE = USERENV ("LANG")
AND linesb.chr_id = hdr.ID
AND linesb.ID = slines.cle_id
AND linesb.ID = kitems.cle_id
AND kitems.object1_id1 =
SysItems.inventory_item_id
AND kitems.object1_id2 =
SysItems.organization_id
AND kitems.uom_code = uom.uom_code (+)
AND unit of measure. LANGUAGE (+) = USERENV ("LANG")
AND linesb.sts_code = stsb.code
AND stsb.code = ststl.code
AND ststl. LANGUAGE = USERENV ("LANG")
AND timeunit.uom_code =
oks_misc_util_web.duration_unit
(linesb.start_date,
linesb.end_date
)
AND timeunit. LANGUAGE = USERENV ("LANG")
AND linesb.line_renewal_type_code = rentype.lookup_code (+)
AND rentype.lookup_type (+) =
'OKC_LINE_RENEWAL_TYPE '.
AND (IN) hdr.ID
SELECT kh.ID
Of okc_k_headers_all_b kh.
okc_k_lines_b kl,
Ki okc_k_items,
okc_line_styles_v ks,
csi_item_instances c,
mtl_system_items_b I have
WHERE kh.org_id = p_org_id
AND c.instance_id = p_instance_id
AND c.serial_number = p_serial_num
AND i.inventory_item_id =
p_inventory_item_id
AND kh.contract_number_modifier IS NULL
-can be filled
AND kh.ID = kl.dnz_chr_id
AND kh.ID = ki.dnz_chr_id
AND kl.ID = ki.cle_id
AND kl.lse_id = ks.ID
AND IN ki.jtot_object1_code
("OKX_CUSTPROD")
AND c.last_vld_organization_id =
i.organization_id
AND TO_NUMBER (ki.object1_id1) =
c.INSTANCE_ID
AND c.inventory_item_id =
i.inventory_item_id))
Service = 'GUARANTEE '.
AND TRUNC (SYSDATE) BETWEEN start_date AND end_date;
Not sure where it would be so I put it in the section SQL/PLSQL.
Kind regards
Prashant
Found the solution
AND TO_NUMBER (ki.object1_id1) = c.instance_id
replaced by to_char (c.instance_id) = ki.object1_id1 AND
Maybe you are looking for
-
How to restore As New - iPhone 6
My iPhone 6 has intermittent periods where the screen goes totally insensitive. Reboots fix things, eventually, but it happens almost every day... sometimes several times during the day. I took the phone to the Apple Store last night, and the Genius
-
Satellite L850-150: Webcam does not work
Hello world! First of all, sorry for my English not good enough. I'm from the Spain and I bought a laptop Satellite L850-150 less last year. The problem is that I have not tried the webcam so far, and when I did, it does not work!When I used the webc
-
Microsoft Wireless Optical Desktop 5000 keyboard 105Key
The Wireless Optical Desktop 5000 has a lot of buttons on the keyboard and a zoom slider. How can I make their assets under Windows 7?
-
Evil emails will not be removed I have Windows XP and MSN email. I have two emails, responses to facebook friends who seem to be malicious and will not remain in the deleted folder... they simply re - appear in the Inbox in seconds. When I click on
-
HP2540 Deskjet: printer problems
I just got a used 2540 and it will not be printed. I took it apart and cleaned it disconnected all caps & ribbon cables and cleaned them. Everything else works, but the impression. Door open message appears and there is no door open, and there is no