Peripheral USB is not recogonuized but nothing appears
USB device is not recogonized when I c; ick and achieve the realization of window is located please help and tell me how to fx it screen freezes and difficult to thaw
Hello.
This could indicate that it is something wrong with the USB device.
Try to plug it into another computer and see if it is recognized it. If you get the error even there, it's almost 100% chance that there is something wrong with the unit and not on your computer.
Tags: Windows
Similar Questions
-
Error "USB device not recognized", but nothing is plugged in and my webcam is not working. It says webcam not connected
Hello
Since you said it worked very well recently, I'll try to do a system restore at this point in time.
See this link: http://windows.microsoft.com/en-us/windows7/products/features/system-restore?SignedIn=1
In addition, see the response of the Meghmala and follow the instructions listed there. I think that the three method might be the best of the bunch for you, but they have all the right steps.
See this thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/usb-device-not-recognized-in-windows-7/8106a712-a13e-4ca5-b82e-c3961cc254b1
-
Error "USB device not recognized" but nothing is plugged
Hi, this problem recently just started to happen, nowhere I can say. Whenever I turn on my computer or it wake up from hibernation, a message from the task bar appears saying "USB device not recognized". However, there is nothing plugged one of my USB ports. I have three USB ports available, and all are empty. I tested all three ports in something by plugging, and all three ports seem to work well. What can I do to get this message to stop appearing? Thanks in advance!
Hello
Some USB devices are integrated as WebCam, Touchpad, fingerprint and other reader, so it could
be people or a total glitch.----------------------------------------------------------
References to Vista also apply to Windows 7.
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-----------------------------------------------
Then lets refresh the USB stack
Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
Devices disabled - look around (with the exception of USB controllers) for your devices (can have
zero or more than one) and top - right click UNINSTALL.Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
UNINSTALL all but the category itself - REBOOT - it refreshes the driver and battery USBThis KB shows XP how to and methods of Vista and Windows 7 are the same
http://support.Microsoft.com/kb/310575This is a utility to help you, but do 1 above.
USBDeview is a small utility that lists all USB devices currently connected to your computer.
as well as all USB devices that you previously used. Run Options and tick three 1
are there choices to see if any.http://www.NirSoft.NET/utils/usb_devices_view.html
You must remove all instances of the devices and restart.
----------------------------------------------
If necessary try these two:
Tips for solving problems of USB devices - and a Mr Fixit
http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGBHardware devices not detected or not working - Mr. Fixit
http://support.Microsoft.com/GP/hardware_device_problemsI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Receives the error "USB device not recognized" but nothing is attached to the laptop
I get "Device not recognized USB" popping up - I have no devices attached to my laptop USB
Hi jamescrighton,
Please see the thread with a similar problem and fix possible:
I hope this helps!
-
We get the popup "USB device not recognized", when nothing is connected.
Original title: pop up message
I connected the USB cord to transfer information from your old phone to new phone via Itunes. Since that time that I keep getting a pop up message that says: device not recognized USB, the defective device, windows does not recognize. Nothing is plugged in, but message appears every few seconds. How can I get him to stop?
Hello
It seems that you are getting the popup "USB device not recognized", when nothing is connected.
What is the brand and model of your computer?
I suggest to uninstall the USB controllers and check if you get the context menu.
Method 1: Remove and reinstall all USB controllers
a. clickStart, type devmgmt.msc in the start search box and press ENTER.
b. expandBus USB controllers.
c. right-click on each device under theBus USB controllers node and then click Uninstall to remove them one at a time.
d. restart the computer, and windows will install the rear USB drivers.
If reinstalling USB host controllers fails to resolve the issue, go to method 2.
Method 2: See the procedure suggested by johnkelly46 responded on October 26, 2009, from this link.
If you have additional problems, please reply to this post and we will be happy to help you further.
-
When I start my computer Windows 7, it starts but nothing appears on the screen.
Original title: startup problem
Hello.
When I start my computer win 7, it starts (fan starts, dvd disk drive turns on, lights on the Tower of keys on and even usb ports give power IE can charge my phone by usb cable), but nothing appears on the screen (empty, nothing, does not react)
However, after you restart the computer several times active and computer screen display works fine without problems.
This problem occurs only when I turn on the computer after having completely off but does not happen when I restart using the option restart.
I'd be suspicious of an imminent hard drive failure. Download and run the program tester for the manufacturer of your hard disk drive. Give me the model number of your player (Device Manager), and I'll give you the link to download. At least, you have to exclude this possibility before you spend a lot of time trying to re - build.
-
I am trying to perform a static check on the model. When I double click the model and go to the tab control... There is nothing to select in the knowledge module. I want to use CKM here... but nothing appearing in the drop-down menu. The global not supposed to KMs the listed here?
Hello
You have imported the whole CKM in modules of knowledge?
If not, import ckm and do it.
Kind regards
Gangareddy.k
-
I'm trying to download the trial version of InDesign, and before I could do that I had to improve my creative cloud. Once updated, my computer freaked out, acted like it was stop, then has not.
Now, I click on the creative cloud icon, but nothing appears. It runs, it will appear in the 'process' when I do the Task Manager, but in fact, nothing is displayed.
I seriously got creative cloud, ha.
Please refer to:
https://helpx.Adobe.com/creative-cloud/KB/troubleshoot-CC-installation-download.html
Concerning
Baudier
-
I chose "keep files" before deleting a user profile but nothing appears in the saved folder?
When I deleted a user profile, I chose to "keep files" and a folder has been created and saved to the desktop on the Administrator profile. However, when I opened this case nothing appears? The properties of this reflex folder with precision the size of the files that have been saved (20 GB), but nothing appears when I click on the folders. This is especially of music and images. How can I get these files that are obviously there?
Well, I'm a fool. Click Documents, select the icon organize in the menu Tools, drop down to folder and Search Options, click view, click on the box that says "show the hidden files and folders". Click on apply. Click OK. FACT.
-
The box at the top right of the hotmail page shows that I have an unread message, but nothing appears on the list of received messages.
Hello
The question you have posted is related to Windows Live Hotmail; This is why it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.
-
mail download messages but nothing appears
Greetings,
Mail again me this is download the messages, but nothing ever happens. I checked the spam, junk, smart folders, rules of nowhere - but I don't know what is happening.
I have multiple email - some IMAP, some POP3 accounts, but none are exchange server accounts.
Any help would be appreciated
Running the latest version of the El Capitan and Apple Mail
Thank you
JK
I noticed that Mail does the same on my computer and I searched a bit looking for a response. Most of the positions included problems with the functionality of e-mail, which I did not live. It seems that you are in the same boat, everything works, but annoying little dialogue "Download messages" appears, every minute couple that seemed in my case, no real new message coming.
Anyway, I found an old post of 2010 which provided a solution and because it was easy to implement I gave it a try and it seems to work. Curious if you will have a similar result and since I have no explanation of why it works (maybe) then maybe someone else can still sound.
Here's what I did:
- Go to my spam folder and delete all content (from all accounts).
- Come on in my drafts folder and delete all content (from all accounts).
- Go to the dropdown box in the menu bar and choose Synchronize all accounts.
The old post of 2010 affirmed that there was a problem with mail folders and the currents of air and undesirable... as I said that he did not have a lot of explaining. So far, I noticed not all alerts more "download messages" while in the Mail, and like I said they were coming very often.
I hope this helps!
-
Peripheral USB is not recognized (external hard drive)
I have a western digital external drive who worked originally on windows XP Edition family, unfortunately this computer crashed and had to reinstall everything. After ending, I went to retrieve some data off the drive and it keeps giving error usb device not recognized. I looked on a lot of different 'solutions' to nothing does not. I can connect to other computers running the same operating system and he shoots very well if it is not the drive. It seems as if a driver is missing, but I checked with Western Digital, and they say the questions is a mistake of operating system, all updates and service packs have been installed. Ive tried all online of the easy solution like just unplug the computer and the drive and restart, remove and reinstall the drivers in the OS System. In Device Manager its reports as an unknown device under the USB bus controllers section. I need to get this to work by car no matter either if it needs to be reformatted or repartitioned, but I can't even pull up on the drive to reformat so don't know what to do. any suggestions are greatly appreciated.
The problems detected as "unknown".
http://support.Microsoft.com/kb/314464
WD Firmware Updater. (May be necessary since you have reinstalled the OS)
http://www.wdc.com/wdproducts/wdsmartwareupdate/?ID=wdfMyPassport&OS=win&FW=1
-
Your podcast is located instead has been approved, but nothing appears.
I received an email, Wednesday 11 today is the 17th, saying "podcast dear owner, .
Your podcast, located at https://s3.amazonaws.com/thecloudnetwork/16628/sermons.xml, has been approved. You expect to see on the iTunes Store in the next few hours. When it is available, you will be able to access the URL below.
https://iTunes.Apple.com/us/podcast/Baldwin-Church-Christ-sermons/id1112626310
You can find your podcast using iTunes Store search in the next two days. »However, nothing appears to this address, and when I search my podcast in iTunes Podcast, I find not here either.
Any ideas why the podcast isn't available?
The first thing to do is to connect to Connect to Podcasts , select your podcast and check if she is 'hidden' (there have been cases of new podcasts being hidden, which is a bug in the system). If the link below on the left, under 'Further information', says "Hidden" click on it to view the podcast. It may take a few hours to appear in the store.
Otherwise, you will need to contact support. Go to https://itunespartner.apple.com/en/podcasts/overview and click on the link "Contact us" at the bottom of the page.
-
Satellite Pro M70: removal of the USB device causes other peripheral USB does not work
Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.
Satellite Pro M70-199 (2 GB RAM)
Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
This laptop has 3 USB ports.
An Eicon Diva ISDN USB modem is connected to a USB port.When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)
Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.
Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.
Is this a known issue?
If it is a hardware interrupt problem, how to solve it?
This problem is related to the modem and the laptop?As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.
The reason why it is a crucial issue is that:
(1) the modem speed is halved or disconnected
(2) the ISP continues to full rate for a double load connection even if a channel has been dropped.Any help will be greatly appreciated.
Here is some information on USB devices, followed by some information about IRQ settings.
Driver date 01/07/2001
Version of the driver 5.1.2600.2180
Driver provider Microsoft
File INF usbport.infDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
Location Information PCI bus 0, device 29, function 0
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 23
Port 1800-181FDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 29, function 1
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 19
1820-183F portDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 29, function 2
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 18
Port 1840-185FDescription of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 29, function 3
PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
Device resources
IRQ 16
Port 187F-1860Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Date of the driver 06/01/2002
Driver Version 5.1.2600.0
Driver provider Microsoft
File INF usbport.inf
Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
Location Information PCI bus 0, device 7 function 29
PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
Device resources
IRQ 23
Memory B0000000-B00003FFDescription of the device resource sharing
DMA 04 exclusive Direct memory access controller
IRQ 00 exclusive system clock
IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
IRQ 08 exclusive system CMOS/real time clock
IRQ 09 shared system compatible ACPI Microsoft
IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
IRQ 12 exclusive pointing Alps-device
IRQ 13 exclusive Numeric data processor
IRQ 14 exclusive Primary IDE Channel
IRQ 16 shared generic CardBus controller
IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
IRQ 16 shared ATI MOBILITY RADEON X 700
IRQ 17 shared Realtek AC97 Audio
IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
IRQ 19 shared host controller Standard SD compatible SDA
IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
IRQ 20 shared of TOSHIBA software modems
IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
Post edited by: sakhri
Hello
I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.
Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation. -
Peripheral USB do not work correctly on the Satellite M40 313
I have a Satellite M40 313 I bought there are about 1 1/2 years and have had some problems with.
However, I recently bought a Canon S3 IS and a Buffalo portable HD here in Japan, where I currently work.
These two devices do not work with my computer.Attach the HD produced the message that this device will work better with a USB 2.0 high speed Port, before XP decides that the HD is actually a keyboard HID device! The camera mount, for which I had installed the software provided, will produce a message that suggests that I have install usbscan.sys file and forces me to use a driver of generic digital camera that does not work with the Canon camera.
I fetch the requested file, but it made no difference...It seems that it is a problem of USB, and I also noticed that some of my friends devices USB do not work well with my computer.
In this case, what is the best way to update my software so its compatible USB? Have I been dismantled down to the USB 1.1 version by WIndows at any given time? The pilot on the hub root 5.1.2600.2180 and is dated 07/01/2001.
Any suggestion is appreciated.
Hello
Perhaps a biosupdate could help you? I mean it s do not know if is it a hardware problem or software, so that you can first try to check if it s a software linked history by:
1.), updated the Bios
2.) recover the system with the recovery cd (backup your data first! ;))
3.) install the latest drivers (do not install MS updates or patches, sometimes they cause errors)If you have no success after completing these steps, and then give a few comments.
Welcome them
Maybe you are looking for
-
Failed to retrieve the recently closed windows browser tabs
Yesterday, when I was not bothered just opening my browser, I opened a tab next to him do a little homework, and without thinking, I closed the browser with the last browser as well, which means I lost all my information from that, but didn't know un
-
Qosmio X 770-webcam does not work
I have problems getting my webcam to work. I reinstalled the latest driver from Toshiba a couple of days, and it worked for a few minutes. The day then I clicked on the icon again, and nothing happened. Worse, the icon for webcam software also disapp
-
I have two ps3s that are connected using the easy option in the XMB with active UPNP and to NAT 2. one of us can play any game online. But when two of us try to go on Call of Duty 4, the last of them to click on find game will get "Downloading game s
-
blue screen after installing new graphics card
Just install my new geforce gt 240 to replace my 9400gt. After reinstalled vista driver & restart, my system to start start then goes to a white screen for 2-3mins fight & displays a blue screen quickly and then restart & repeat once again. Vista wil
-
[SD |] Resolved] hard drive by PowerEdge2900 e PowerEdge 2600
Buongiorno, Ho di need a hard drive by PowerEdge 2900 (ST: 4T39KC1) di e a hard drive by the PowerEdge 2600 (ST: 83GSL21) sewn by conto dell'azienda per cui lavoro, como devo procedere? Grazie Gianluca Cipolletta