Peripheral USB do not work correctly on the Satellite M40 313

Similar Questions

• Some keyboard keys do not work correctly on the Satellite P200-144

  Hello

  I have a problem with my P200-144, when I type very fast missing keystorkes, this does'nt be as other keyoards.
  Also, my arrow is very steep.

  For me this is nothing strange. I have older Tecra M1 and the buttons are flabby. The new A200 (similar keyboard like the P200) it is not the case. The pressure must be stronger than on Tecra and if I type very quickly some keys are missing.

  Maybe you must type a little more slowly.

• DIAL-UP Modem is not working properly in the Satellite A200 - 1 GB

  My A200 - 1 GB modem does not work correctly. It tries to connect, but at last he said computer remote does not respond. As I noticed it has a modem 56kpbs of "I agree."
  It is shown as Toshiba Software Modem.

  I tried so many times it does not work properly. I tried changing the COM ports assigned to several other ports like COM1, COM10 COM, COM 4 ext... same thing happens.

  When I diagnose the modem via the properties of the modem without issues considered.
  Even when I'm component via the modem to a telephone line (I mean as a call) it works fine. I mean that he can call on a mobile phone or phone of the Earth.

  But the same phone line works fine with my desktop modem as same as another modem of HP laptop.

  It seems that there is a fault on my modem 56 k.
  I tried even uninstall and reinstall, but the issue still exists.

  Can someone help me in this case?

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=109510#109510

  Seems that started two threads on the same topic.

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• InKeySetFilter not working correctly with the filter that is not IndexAwareFilter

  I found that InKeySetFilter works correctly with filter that does not implement IndexAwareFilter.
  
  for example:
  cache contains the Integer objects
  
  cache.keySet (new InKeySetFilter (new ClassFilter (Integer.class), cache.keySet ())) //returns all elements
  
  cache.keySet (new InKeySetFilter (new ClassFilter (String.class), cache.keySet ())) //also returns all the items
  
  InKeySetFilter works the same way, not only with ClassFilter, but with a filter that is not IndexAware. It looks like a bug.
  
  PS using coherence 3.5.3

  Hi Serge,

  Yes, there seems to be a bug, if m_filter isn't an IndexAwareFilter, applyIndex returns null instead of return m_filter.

  With the help of the following subclass should solve this problem:

  import java.util.Map;
  import java.util.Set;
  
  import com.tangosol.util.Filter;
  import com.tangosol.util.filter.InKeySetFilter;
  import com.tangosol.util.filter.IndexAwareFilter;
  
  public class FixedInKeySetFilter extends InKeySetFilter {
  
     public FixedInKeySetFilter() {
     }
  
     public FixedInKeySetFilter(Filter filter, Set setKeys) {
        super(filter, setKeys);
     }
  
     public Filter applyIndex(Map mapIndexes, Set setKeys) {
        Filter filter = getFilter();
        Filter res = super.applyIndex(mapIndexes, setKeys);
        return setKeys.isEmpty() ? null : filter instanceof IndexAwareFilter ? res : filter;
     }
  }
  

  Best regards

  Robert

• Apple Watch sport does not work correctly. The display is 'crazy' once or twice a week and I need to force restart it. Do you know what is happening with the watch? Is this a common failure?

  Apple Watch isn't working properly. The display is to be 'crazy' once or twice a week. And I need to force restart it. Is this a common failure?

  Hello

  This isn't a failure or defect.

  Zoom (an accessibility function) has been activated on your watch and you are zoomed accidentally tapping on the screen in a particular way.

  • To turn off the Zoom:
    • On your iPhone, in the application of the watch, go to: My Watch (tab) > general > accessibility > Zoom - put it off.
    • Or on your watch, go to: homescreen (via a simple press on the digital Crown) > (cog icon) settings > general > accessibility > Zoom - tap and enable / disable.
  • If the accessibility shortcut has been enabled and configured for the Zoom, you can also enable and disable functionality more conveniently:
    • On your watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On your iPhone, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect Zoom.

• External mouse and keyboard do not function correctly on the Satellite Pro C650

  I have problem with my external mouse and an external keyboard. All started about 3 weeks ago. They freeze, jump or a stop, the most annoying is the mouse, I need to plug it back usually. This will work well about 1-5 minutes and once again. Touch Pad works well.

  I have installed the latest Windows updates, also downloaded and installed the drivers from Toshiba web. I configured the default BIOS settings. Nothing helps.

  I don't have a recovery disk to try it. Is there any solution other system recovery/reinstallation then?

  Someone had this problem?

  Hello

  It is not easy to say on this issue.
  Do you use wireless devices? Are the batteries OK?
  Have you noticed the same problem with other USB devices?
  I assume that the two uses of devices USB port of your laptop.

• Keyboard does not work properly on the Satellite P100-465

  Hello
  Toshiba P100-465, I bought last month and discovered that if you press any key sound (especially the SPACEBAR or enter) between the upper right, it does not work.
  I never saw such a problem anywhere in any laptop. Please confirm if this is the case with all or should I get my keyboard replaced.

  I read this forum for a long time and I have strength to find a lot of comments about it. Because of that I think he cannot be serious and I recommend you contact the partner of service authorized in your country.

  By the way if you press the keys correctly (around using the button) I see no problem there but service can check properly and if problem described is a problem with the hardware keyboard will be replaced free of charge.

  Bye and good luck!

• Synaptics touchpad is not working properly on the Satellite A100-635

  My synaptics touchpad is not working properly my mouse works very well but does not work in every corner of the touchpad for special functions.

  I tried to set it up again but it had no result, also I downloaded a new driver, but it had no results to. My buttons multimedia keys like play/pause or stop are not no longer works.

  These buttons/keys stopped working at the same time as the touchpad. Checked with NOD 32 pro virus and spyware with ZA pro ==> no results.

  Who can help me with this problem?

  Hi Jarno

  Do you know how many different Satellite notebooks have a series? Drivers and tools are not the same for each of them. Because of this you should also tell us that you have.

  According to your description, I can tell you: install OS using support and recovery delivered with factory settings, your mobile phone must be configured correctly.

• Touchpad is not working properly in the Satellite A200

  I have wired rather question for you, may be common.
  Touchpad on my laptop is not working properly, and I'm wondering someone can tell me what 'wrong with it. My problem is at the bottom,

  When I turn on the laptop, I can connect to the through the use of the touchpad, but after I logged in the only thing that I can move the pointer over the programs, but I can't double click or do anything else. When I double-clicked the icons it does nothing.

  So I thought I might turn off something by mistake, can I use the touchpad to connect.

  Can someone please tell me how to solve this problem or what I can bring to a service center?

  Hello

  If you can still move the cursor using the touchpad touchpad is not disabled.
  Perhaps a button configuration has been changed.

  Usually, you can configure the touchpad the touchpad settings.
  Did you check that?

  You can find the settings in the control panel-> mouse
  There should be an Advanced tab.
  Go ahead and check the settings of the advanced feature.

  Here, you can configure the simple buttons and also the touchpad.

  If you will not be able to reach these settings so I recommend reinstalling the driver for the touchpad again!

  Good bye

• An api imported USB does not work correctly

  Hello everyone,

  I am currently using LabVIEW to communicate with a USB device and I had to import an api USB I bought. With VC ++ this api works well, but LabVIEW has its problems.

  First of all, I imported through Tools > Import > Library (DLL), chose the DLL and the corresponding and any Headerfile which worked without problems. Now I got my 14 VI, one for each function declared in the DLL.

  It is, most of these functions will not properly work, or maybe I just don't understand their right or give them the wrong settings. I will attach a screenshot of the 'GetList.vi', which should return a list of all connected USB devices.

  My guess is that the defined pList could be a problem because it must contain the char, int etc but as you can see in the screenshot, contains only numbers.

  Any help would be greatly appreciated!

  Kind regards

  Pedro

  EDIT: Here's the description of the documentation of the api USB GetList method:

  GetList)
  This function searches the system for USB HID devices and generates a list of these devices and their availability.  The caller must provide a pointer to a buffer that will contain the list of entries of the structure.  Must also provide an integer representing the maximum number. entries may contain the buffer.  Returns the total number stored.

  int CUsbHidApi::GetList)
  unsigned int VendorID,
  unsigned int ProductID,
  char * manufacturer.
  char * SerialNum,.
  char * DeviceName,.
  mdeviceList * pList.
  (int nMaxDevices);

  Description of the settings:

    VendorID / / Vendor ID search (0xffff if not used)
  ProductID / / product ID of research (0xffff if not used)
  Constructor / / manufacturer (NULL if not used)
  SerialNum / / serial number to search for (NULL if not used)
  DeviceName / / name of the search tool (NULL if not used)
  pList / / table of the appellant for the storage devices
  nMaxDevices / / size of the ArrayList to the appellant (no.entries)

  smercurio_fc wrote:

  When I posted response you has not yet posted any header file, so I did not see the header that you posted 2 minutes after my answer. In view of the header, you should be able to call these functions. However, the pList parameter is a pointer to a structure that contains variable length strings. This isn't something that you can easily manage, and such a question was discussed several times on this forum. When you get to this level of complexity in terms of parameter data types, you will need to write a wrapper DLL so that the types of data between LabVIEW and the DLL are simple data types only.

  In fact the code created byt the library import wizard handles pointers of varying sizes correctly for an item in the structure, so nMaxDevices must never be placed in anything else but 1.

  It is also not entirely clear if manufacturer, DeviceName and SerialNum always are inputs to the function or not, but I guess they are. A problem here is that the DLL function expects a NULL pointer if it must ignore the string parameter according and not only a string empty, so you will probably need to create call several nodes of the library with the configuration of the various parameters to ignore one or more of these settings.

  The data type of mDeviceList which had been initially used by the library with a fixed size of embedded strings would have been a little bit more efficient to implement in LabVIEW but always a PITA too.

  I can only recognize smercurios statement that this type of API is absolutely better managed with a wrapper DLL. While it is not impossible to do it entirely in LabVIEW, it is more than the import library Wizard can eventually handle automatically and doesn't require so some stunts of advanced in the LabVIEW diagram memory pointer that must be done manually. Something which is not really run by a person without some serious C programming knowledge, but this person is clearly going for the wrapper DLL solution because it is much easier to manage than to do everything in a LabVIEW diagram by hand.

• Color calibrator may not work correctly, because the display does not fill screen.

  I have a Thinkpad W520 with 1920 x 1080 HD display and the color sensor. I tried to run the color standard application but always, she will work until the end but cannot process measures. So I opened the lid in the middle of a calibration and discovered that the color screen that is supposed to be seen by the sensor is not full screen, thus preventing the color measurement sensor. How can I set the graphics so that this application is displayed full-screen when executing? Thank you.

  Yes. But I just solved the problem. I set my display to display the text, icons, etc., to 150% of normal resolution. Somehow, he was causing the application displays only a partial screen. I set the magnification to 125% and now the standard color works very well.

• Scaling does not work correctly if the scene is in a div

  Hello

  I have the following problem:

  My edgeAnimation is sensitive. It works fine as long as the body is (in its original condition), the parent element.

  For the test, I placed the scene in a simle has a div width of 100%.

  The loading of the page, it works, if the window is reduced, too.

  But if the window gets bigger, the animation isn't more intensified.

  Any suggestions?

  Thank you

  Hello

  You must first upgrade the Animate edge towards v2014.1.1, then open the publication and save it.

  And then, try the solution that I mentioned in my first comment.

  HTH,

  Vivekuma

• Bluetooth does not work anymore on the Satellite A100-683

  Hello

  I'm new to this forum. I am from the Netherlands so my English may be a bit poor. Sorry about that.

  The problem:

  In 2006, I bought a laptop Toshiba Satellite A100-683 9. It has integrated Bluetooth, a good processor and 1 GB of RAM. It works great, even bluetooth. A week ago stopped working Bluetooth.

  Device Manager, reinstall the drivers, the recovery cd, ConfigFree, tried everything without success. No Bluetooth. The laptop has a chip integrated Bluetooth 2.0. It works, but not now. Boats a year ago, because he has "one year warranty".

  Is there anything I can try to fix the Bluetooth?

  http://APS2.toshiba-tro.de/Bluetooth/?page=FAQ/bluetoothnotworking

• Keys do not work correctly on my Satellite L655

  I have Satellite L655-1HE, a few reasons that I was forced to reinstall Windows 7. After the installation is completed. I found that certain keys are not the same what kind of grades on them. for example when

  I press {color:#ff0000}*Shift@*{color}, is not showing *{color:#ff0000}@{color}* (its display {color: #ff0000} *: * {color}) and

  Wen I press on * {color: #ff0000} UPDATE: {color} * his watch not {color: #ff0000} *: * {color} (its display {color: #ff0000}*@*{color})

  can someone help me get back the keys as usual as before...

  Post edited by: shoaibakhtar

  Hello

  Computers notebooks are specific products of these countries, and if you use original Toshiba recovery image that you got with your laptop keyboard language must be the right one, except that use you own BONES.

  In any case, the advice of the previous user, and change the keyboard input language.