Permission to access local storage problem

Similar Questions

• "Access: Local only" problem and an unidentified router connection.

  I use a laptop Compaq Presario CQ60 with Windows Vista Home Basic.

  The laptop connects to the router (a Belkin.43A1) However, it is unable to correctly identify the router and does not connect to the internet. Offer me only a "Local" access only

  My brother has the same exact model of the laptop and windows vista edition, with all settings completely unchanged but suffers still from the same connection problem.

  All other devices in the House are able to connect to the internet through the router, such as ipods and game consoles. Another laptop running Windows XP is able to connect without a problem.

  Connecting the laptop to the internet works when connected via an ethernet cable.

  I tried several solutions offered on the internet without any positive results, such as:

  -Disable IPv6

  -Computers wireless card uninstalled, then put it back

  -Uncheck the link layer topology

  -Restart the router/mobile

  -Check and install all updates for windows and HP

  And several others, all parameters have returned to what they once were.

  Help and suggestions or solutions would be greatly appreciated thanks.

  Hello

  It could be set-match security, log in to the router wireless security turned off and see if you can connect

  If it works, restore security.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• I'm having a problem sharing back and forth between xp and vista & get the error that I don't have permission to access files

  original title: sharing of Vista with XP

  I'm having a problem of sharing back and forth between xp and vista.  I've set up the sharing, but I still get the error message that I don't have permission to access files

  Kill / disable the Vista password protection option. If you have installed a separate firewall, configure it.

• Problem in Local storage

  Hello

  I used the local storage. in phonegap, but there is problem I prepare new generation after the removal of the previous generation of the device data has been saved in this key.why this problem, in my view, there is suppression of local data when I delete the generation

  Hi ravi,
  Copy the following code

  localStorage.clear();
  

  This will help you to clear all values in localStorage.

• Problem when executing the processors in the nodes with disabled local storage

  Hello world
  
  We test the coherence JSR107 (a.k.a. JCache) implementation of Yannis (https://github.com/yannis666/Coherence-JSR-107) and we found the following issue when you work with a local storage where distributed cache node is disabled (using - Dtangosol.coherence.distributed.localstorage = false). Yannis implementation uses several EntryProcessors for the execution of operations get() or put () in the cache. For example, the following code is used to update a value in the cache:
  
  / public class PutProcessor implements InvocableMap.EntryProcessor {}
  
  @Override
  public Object process (input InvocableMap.Entry) {}
  BEntry entry = (BinaryEntry) BinaryEntry;
  return bEntry.isPresent ()? bEntry.getBinaryValue (): null;
  }
  
  }
  
  And put operatino is taken from the following code:
  
  namedCache.invoke (key, CPU)
  
  where processor argument contains a reference to the PutProcessor object.
  
  
  When we call JSR107 performs surgery put in the cache and code above we get following exception:
  
  java.lang.NullPointerException
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ Storage.invoke (PartitionedCache.CDB:10)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onInvokeRequest(PartitionedCache.CDB:52)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache$ InvokeRequest.run (PartitionedCache.CDB:1)
  at com.tangosol.coherence.component.net.message.requestMessage.DistributedCacheKeyRequest.onReceived(DistributedCacheKeyRequest.CDB:12)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:34)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:33)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.PartitionedService.onNotify(PartitionedService.CDB:3)
  at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.partitionedService.PartitionedCache.onNotify(PartitionedCache.CDB:3)
  at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:42)
  at java.lang.Thread.run(Thread.java:662)
  
  Of course we have previously started another node in the cluster with local storage enabled.
  
  It seems that, as no storage card is present at the node, a NullPointerException is thrown when you try to insert the entry.
  
  Could someone give advice on this problem and how to overcome? This implementation is based on the processor is not compatible with the knots of localstorage cache disabled?
  
  Thank you in advance,
  
  Daniel C.

  Hello

  It sounds like COH-7180 - demand deserialization failure results in a cryptic NullPointerException, that has been fixed in one of the 3.7.1 patches. The real problem is that your entryprocessor cannot be deserialized.

• Local storage of the ESX access from the rest of the world

  Maybe a silly question but... Is it possible will access the local storage of a box ESX from the outside world?  I would like to have access to a Windows System.

  Thank you

  TW

  > Is there any acounds of work on this? The schedule of the virtual machine to power down? Buy Veeam software?

  Yes. Upgrade to full Veeam Backup, but remember to ESXi any level except free license. In the case of ESX, I guess you already have a commercial license, so only purchase of Veeam is necessary.

  ---

  MCITP: SA + WILL, VMware vExpert, VCP 3/4

  http://blog.vadmin.ru

• Popup of local storage that cannot be granted or denied

  Computer of my mother who is an iMac running the most recent version, has begun to show this popup last night when she goes on shockwave.com to play games.  It says something about the local storage and gives you the ability to allow or deny.  (Sorry I don't have a screenshot, but I'm on my computer after working with him for hours).  The problem is that you can not click or either allow or refuse - he won't do anything.  I tried the tab options and it would move but nothing if you hit enter or SPACEBAR.  The only way out is to leave the site.

  I don't really know a lot about Adobe Flash so bear with me please.  She uses Firefox, but the same thing happened in Safari when I went to shockwave.com.  He arrived in Chrome at the moment.  The computer is almost new and I checked and the last version of Flash has been installed.  Just to try it, I uninstalled Flash and reinstalled and exactly the same thing happened when I went to this site.  She says she's only seen on this Web site.

  I have Firefox configured to always ask before running it.  I changed it so that it always runs for this particular site, but the popup was always there.  I researched and researched and exhausted all the options I can think.  It is not just a matter of the popup is annoying, is the fact that it will not go away, or allow you to click on what it is about that.  My elderly mother has very limited abilities and understanding when it comes to technology and online security is a huge concern.

  Does anyone have ideas about what could possibly help?  I appreciate all the help and assistance.  Thank you.

  Yes, it's a symptom of our anti-clickjacking too careful logic.  This happens usually when something animated moves behind the dialog box, or sometimes, it's just specific resolution/zoom-level.

  Unfortunately, as a browser plug-in, it's really hard to say whether or not we are above the thing on the screen, and we do not accept clicks on the dialog boxes for security unless we know that you actually see them and not other thing (for example "click here to win! 1. '') superimposed on top of it.

  Honestly, in 2016, restrict the ability of content to store data locally is not really buy you something meaningful in terms of privacy and security.  If you want to avoid persistent tracking chips, your browser's private browsing mode is much, much more efficient, and we pay tribute to her.  We also clear the Flash Player local shared objects when you clear cookies from your browser (to the extent that your browser tells us that you have done this).  Aversion for Flash Player local shared objects is largely based in the superstition at this stage.  The ability for marketers to create followed resilient, persistent is much more powerful in native HTML and JavaScript.  Feel free to look through my feeding activity to find similar posts, where I pointed the academic research on the subject, etc.

  So, here's my pragmatic recommendation:

  Go to settings > Flash Player > storage and choose allow sites to record information on this computer

  Where you do not want websites to save persistent information, use the private browsing mode.

  This accomplishes two things:

  -Content stores data locally, while everything seems to work normally to the content.

  -Flash Player nor the content will throw errors or permission dialog boxes

  -All data is stored in a temporary location, which is destroyed when you exit your private browsing session

  This gives you the best possible user experience and the best defense against tracking in Flash and HTML/JavaScript.  If you are in the business to uniquely identify people, it is a general practice at this stage to use all the technologies available for the redundancy and resilience, including techniques of both local fingerprinting that on the server side, so just to "solve" the Flash Player vector by disabling LSO does not significantly help.

  Unfortunately, the threat of clickjacking requires us to implement solutions less than optimal and the decade or so of experience with very smart people working on it shows that it is a game of whack-a-mole.  It is best to avoid scenarios where the dialog box gets jumped by adding fields to the trust list, or simply by allowing access to the total of just.  The ideal solution would be to move these to the browser native user interface dialog boxes, but which requires buy-in from all browser vendors involved, etc..

• WRT610N connection and network storage problems

  First of all, on my network, I have a wired under Vista Ultimate PC, a portable wireless g running XP Pro, a Wired VoIP PABT box, an iPhone, a g wireless Mediagate MG350HD media Extender connected to the TV in the living room (about 10 meters through the 3 wooden walls) and I have a drive hard usb connected to the WRT610N router.

  I spent only on tape 2.4 on the router - 5.0 band request the customer to have N Wireless anyway, since I have no devices N Wireless is no use right now?

  I use it to manage my network Network Magic.

  Problem #1.   My Mediagate MG350HD guard abandon it's connection to the network. I tried to use DHCP and static ip address for this but it falls again. The only solution I've found is to remove the Mediagate masked-out of the network adapter in the Network Magic, restart the router, click on "search new devices" in Network Magic and MOST of the time it will redetect and reconnect the Mediagate. Any ideas?

  Problem #2. Try to configure the network (my hardrive USB) storage device is a pain in the anus.

  In the storage routers tab I can't give a sense creating folder. All I want to do is to share specific folders and all their content on the network. Whenever I go to assign access rights and click on groups most in the access column and hit 'save' it puts back in the denied access column. This has something to with the permissions on my PC? When I go to network and sharing Center it now displays "Network Storage", when I click in 3 folders in network appear, when I try to set permissions on these folders, I hit apply and the boxes I just checked white-out again. The folder marked "Network Hard Drive" (the one I put in place using the storage tab in the router) does not show subfolders and the real movies stored on them.

  When I try to change the permissions on the using my PC, different folders, for example, movies, TV etc... I get the same cutting out of the tickboxes on 'apply '.

  Is there a step by step graphic instruction that I can follow other than the PDF file that came on the disc with the router. It was not very useful.

  As you try to share a storage network on your computer, its nothing to do with your Permission to computers. You must set the appropriate permissions on your router for this specific folder and set the read/write permissions, you will be able to access the storage on your computer and make the appropriate changes in it.

  Once you open a session to your Linksys router configuration page, click on the storage tab, then click on create share and you can select the folder you want to share on the network and give them read/write permissions.

  Once you're done, you can MAP the network drive on your computerand when you are prompted for the username and password you can try the username and the password that you set on your router on the storage tab. Once done after that, you will be able to make the changes.

• "You don't have permission to access to" a computer - Windows 7

  Now, I have 3 laptops in my house.  We're on Windows 7 (let's call it W7) and two are on Vista (we'll call V1 and V2).  On my Windows 7, I can connect (via the network - all PC use the same Linksys wireless router) v1 without problem and see shared files, but I can't connect to V2.  I get the message "you don't have permission to access \\PCName."  Now if I put in place a different id user on W7, I can access the V1 and V2.  I need to stick with my original if possible user id, because this is where I've already implemented a large number of programs that I need for work.

  Any ideas on what could be going on with my original user id?  He worked two weeks ago, although I added a few programs as I finally tried access V2.  Thank you!

  You can 'stick with your original user "; just add it to the machine of V2. See point c below for more details:

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!

• Local storage shows as inactive in the web client

  Hello

  So I have a strange problem. On two of my guests, local storage shows as inactive in vCenter. I can access it without problem and there seems to be problems, but it is a bit concerning to see the alert whenever I am connected.

  

  However, when I checked in the thick client this error is not there. It is only in the web client for a reason any. I tried to restart the management agents, update storage adapters, and a new analysis of storage, but it has not changed.

  No idea what can be the cause and if it's something to worry about?

  Thank you!

  Please reboot the host and see again in the Web Client.

  BTW, what version of vSpehre for your environment?

• local storage facility

  Hello

  It is more a matter of linux.

  I was wondering why I am unable to install a program of local storage. To give you an example, I created a folder by browsing the local data store and copied openmanage Dell inside software.

  However when I try to run the installer I get "permission denied" errors Please see the attached document for more information.

  If I mount the CD and run the installation from there, it goes through fine. Can someone explain what the problem is?

  Thank you

  H

  You must move the installation in/var/tmp files or other space linux file system.

  If your storage VMFS race it won't work (the VMFS cause has not the same characteristic of a Linux file system).

  André

• In a local storage folder, I can't view messages beyond a certain date

  My most recent e-mail messages in a particular local storage folder cannot be found. I get the message "loading" and nothing happens. I updated for Thunderbird 38.2 this morning and then noticed the problem. It's especially bad, because this block of emails contains most of my banking passwords online.
  My operating system is Windows XP Pro Service pack 3

  Right-click on the folder and select Properties, then on the button repair.

  Note that XP is probably the worst place you can think of to store passwords for banking these days. More out of support most at risk, as you become.

• I get a request for local storage through Adobe flash which I can't get rid of

  When I opened a site of video or audio as the NPR media player http://www.npr.org/player/v2/mediaPlayer.html?action=2 & t = 1 & islist = false & id = 370394953 & m = 370394958 & live = 1 I get a request for Adobe Flash Player settings for Local storage. Clicking on accept or decline does not a doggone thing. I don't have the problem with Google Chrome, but I really prefer to use Firefox. I had the problem with other sites next to NPR (National Public Radio All Things Considered). It does not interfere with the download, but there really with the NPR player. My world will not end if you do not resolve the problem, but it would be nice if you could. I live in the Philippines, so that might be a factor.

  I use Windows 7 via a network (Globe Telecom) local DSL

  See the following page:

  • http://www.Macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html

• iPhone storage problems

  Hello, I have storage problems with my iPhone 6. I have the 16 GB model and it seems to be showing me that I used more storage than I actually have. Under the management of storage in the settings section it says I used 11.6 GB and have 83.1 MB of available space. However when I add up the use of the storage for each application he ads only up to about 2.5 GB. In addition, on iTunes on my MacBook, it shows that I have 6.65 GB free. I tired delete apps and optimize Photos stroage and elimination of most local music from the phone. It was me that more sotrage space however when I checked later return that he had exhausted more storage without having downloaded me all the apps, photos, or music.

  iTunes and iOS do not display the use of storage the same way. The best way to ensure that the iPhone is deleted unnecessary files, including video streaming, old app data, etc., is to perform a restore. Make sure that the backup you make in iTunes is encrypted, so all of your critical data is kept. Import all your photos, music, too.

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• Flash does not work in FF26, it works in Chrome and IE. I reinstalled FF and Flash several times. I can't adjust the setting of local storage for Flash either.

  Flash does not work on some web sites. I never had a problem before with flash on FF in the nearly 15 years that I've used FF. Recently it has stopped working for some reason any and on some flash sites does not, NHL.com and site of kid Herotopia being just two of them. I updated FF, Adobe flash, the reinstalled version them repeatedly deleted all the files that have been stored on my laptop; that is, profiles, saved favorite nothing that I could find in user accounts and in the local app, low local and roaming data folders. What is strange, is that I can't set the local storage for flash either. When I visit the Adobe site to view the Adobe Flash Player Settings Manager I can move the scroll bar, but cannot check the: allow third-party flash content to store data on your computer. I can't do it on a Web site where the flash does not work. When I try and it changed on any site that it goes back to zero. Not sure if it is a part of the problem. I got tired of many suggestions on the pages of material here, but nothing works. I even tried this http://forums.adobe.com/message/4566499#4566499#4566499

  The other strange thing is that I used to get the "warning: script does not" prompt that displays "a script on this page may be busy, or it may have stopped responding." You can stop the script now, or you can continue to see if the script ends. "sometimes when I would buy on Macy's.com. This is the only site that it happened.
  I know I have only little technical knowledge, but I have tried to figure this out for a few days and do not know what is happening. The only thing I can think is that I somewhere files corrupted causing this problem. I have just updated to Windows 8.1 tonight in the hope that can help, but nothing helped. I would be very disappointing if I couldn't use FF or must go back using Chrome and FF.
  Sorry for the posting long but no solution would be much appreciated.

  Hi jscher2000,.

  Yes, I followed essentially the: Manual steps: https://support.mozilla.org/en-US/questions/968190?page=5#answer-509209 you have posted.

  And after restarting Firefox, Flash worked. Thanks again for your post I could not find this solution on the Adobe forums until you have posted the link.
  Your expertise and your time is much appreciated.