permitted connection is true when the linked object is null

Similar Questions

• I need an add-on for close tabs automatically when the link is redirected in mozilla firefox

  Hello...

  respected sir
  i need an add on or any software to close tabs automatically...
  when the link is redirected in Mozilla Firefox
  

  pls help me out here...
  If it's them I'm going to pay for it
  I need immediately...
  Thank you

  How is this different to open this link in the same tab?

• HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged

  Hello

  My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.

  Thanks in advance

  Hello @JohannNewma,

  Welcome to the HP support community! I read your post and wanted to tender hand can help you!

  I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.

  You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.

  If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.

  Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.

  Thank you!

• The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection.

  I lose the internet connection

  Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit

  The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection

  Hello

  Control Panel - device - network - manager double-click the used network - power management device
  Tab - uncheck the computer to allow him to turn off the device.

  Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
  Power settings - check the settings there.

  You may reset the default power Plans and and then change them as needed.

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• I can't download attachments in Windows Live, although I can view online when the link is there and can also download zip.

  Cannot download attachments in windows live, although can view online when the link is there and can also download zip. What has happened recently. I was always able to do until recently.

  original title: Windows Live Mail

  Hello

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums at www.windowslivehelp.com.

• How can I close the preview in the Adobe Viewer when the LINK on my eMag ist fullscreen? He'll still go to URL and I can not open the preview.

  How can I close the preview in the Adobe Viewer when the LINK on my eMag ist fullscreen? He'll still go to URL and I can not open the preview.

  You must change your page design if the link does not occupy the full screen of your content.

  Neil

• Foramt shifts positions when the previous column is null

  This piece of code is producting of erroneous results

  column    RZFIDOC_STATE_CODE      format a2 justify right;
  column    RZFIDOC_ZIP                    format a9  justify right;
  column    SPACE                            format a10;
  column    RZFIDOC_BIRTH_DATE      format a8 justify right;

   
   rpad(nvl(RZFIDOC_ZIP,'           '),9)||
   rpad('           ',10)||
  rpad(to_char(RZFIDOC_BIRTH_DATE,'MMDDYYYY'),8)||                                      

  results when the postal code is null

   
  Chagrin Falls               OH44023              031719872828675182  223526
  Singapore 400832                               092819850089012602  223526   

  results when the postal code is not null (perfect)

  CT06517              072019872948824782  
  CT06519              072019872948824782    

  When the zip code is null it moves of the RZFIDOC_BIRTH_DATE to the left, where the postcode is not null, it charted in the right column...
  I need to have 10 (fill) between RZFIDOC_ZIP and RZFIDOC_BIRTH_DATE
  Any help will be very grateful!
  
  Published by: user648177 on April 17, 2009 05:05

  Hello

  VG2 suggested using NVL (col, ' '), so that you would never of NULL values. It is essential that the second argument of NVL not be NULL.
  The string literal "(with nothing between the single quotes) is null.
  Then change

  rpad(nvl(RZFIDOC_STATE_CODE,''),2,' ')
  

  TO

  rpad(nvl(RZFIDOC_STATE_CODE,' '),2,' ')
  

• Help: wet610n will not connect to wrt610n when the ssid broadcast is disabled

  I have a wet610n wirteless bridge linking very well with my router wrt610n broadcast ssid is enabled on the router, but when I turn it off then (the rest unchanged), the wet610n can not connect.

  What I am doing wrong?

  Or require the wet610n ssid will be broadcast (I didn't read that anywhere)?

  Thank you

  I have power cycled it, but I tried again and then experienced little more after you reset the wet610n and reconfiguring again.

  What seems to work, is to allow the broadcast of the SSID of the router and leaving the wet610n bridge wireless connection. So I can turn off the broadcast of the SSID and power cycle the wet610n and it can then connect.

  Without the first activation of SSID and connected, the bridge connects wireless.

  Thank you - it is "resolved".

• Windows 7 laptop does not connect to Wifi when the WPA2 security is Active

  I have a rather unusual problem that my Compaq CQ56 laptop not not connect to my router, ASUS RT-AC56U Wi - Fi when WPA 2 security is active on the router. With WPA2 is off, it connects without a problem. But, when I turn it on WPA2 on it will not connect. This problem persists even if I change the WPA2 authentication code. All other devices at home are able to connect with the wifi with WPA2 enbabled router, and this particular laptop was able to do so until very recently.

  Just to make sure that the adapter in the Compaq works, I just went to Starbucks and it connected to their wifi unsecured without problem.

  I was using a TP-Link Wireless Range extender on the home network, but it was deleted.

  I ran the network troubleshooting and Fix - It nothing works.

  I suspect that for my home network installation file was corrupted on this laptop and I would like to know if there is a way to remove, or edit this file and start from scratch. I have a Compaq laptop earlier generation linking problem now. So I'm pretty a connection file corrupted is the problem. Just need to know how to solve this problem.

  Thanks for any help!

  See this tutorial.

  http://www.SevenForums.com/tutorials/120670-wireless-network-remove.html

• HP 7525 causes my internet connection to stop when the 7525 is on

  I use:

  PC _ HP Pavilion P7-1451

  64-bit Edition of Windows 8

  Cisco WRT400N router

  Printer HP 7525

  I just bought the 7525 yesterday. No problem installing it through my router. When the printer is powered but not in use, my PC (3 ones separated in different rooms) lose the internet connection after a few laps short irregular time. I have to unplug the router and the modem and then reconnect them to re-establish the internet connection. The recommendation of this group, I have reset the printer to a x.x.x.250 IP static. The printer connects very well and I can print from the PC.but meant few PC again lose the internet connection. I then set the modem and the router. When I turn ther printer off, the PC stay connected to the internet.

  I had zero connect problems with this router since I bought it a few years ago. The problem only occurs when the printer is on.

  Obviously, it's a royal pain in the anus. Help!

  We will set a static IP address AND an external DNS for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

• Wireless connection works only when the printer is turned off

  my desktop computer requires an adapter wireless for internet connection.  installation of this card was problematic and I discovered I mean it was because of my printer - a kodak esp 6150 desktop, which can work wireless.    I can only connect wirelessly when the printer is off on this computer.  However, two other laptops that do not need a separate wireless adapter are able to connect wireless when the printer is on.  any suggestions?   Thank you.

  Hi Moscotty,

  You can read the following article and check if it helps.

  Windows wireless and wired network connection problems

• "Send link by e-mail" 'NO' is grayed out, it works, but when the link appears on the body of the email it to "not a clickable link"(not highlighted). "»

  I sent the e-mail to me to see if when I received it I can click it but I still not able to click on it. I also check on default values and that they are correct.

  I use Windows Live Mail, IE 8, Windows Vista Home Premium SP2, 32-bit.

  Can someone give me a solution for this problem, please?

  Thank you

  Ustari.

  Hi Syed,

  I just figured out how to make this clickable link, once the link is on the body of the message (in black) all I had to do was press the "enter" key and automatically got highlighted in blue and underlined.

  Thanks again for trying to help me.

  Ustari.

• &lt; WebLogicServer &gt; &lt; BEA-000365 &gt; &lt; changed in FORCE_SHUTTING_DOWN State Server &gt; when the links at the start of the obiee bi

  Hi gurus,

  I joined Hyperion 11.1.2.3 with obiee 11g. Able to see obiee in the workspace and shared services. But suddenly we rebooted the server. After this obiee link does not. It's show Internet Explore could not open the web page. I tried to start the bi services but the line ends with this error msg.

  < 14 August 2013 9:26:44 AM MST > < critical > < security > < BEA-090402 > < authentication refused: Boot identity not valid; The username and/or password of the start id

  the entity (boot.properties) file is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the boot identifier

  file of the entity with the correct values of username and password. The first time that the identity of starting update file is used to start the server, these new values are enc

  rypted. >

  < 14 August 2013 9:26:44 AM MST > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Auth

  denied entication: Boot identity not valid; The user name and/or password in the identity of startup file (boot.properties) is not valid. The identity of start-up may have

  changed since the identity of boot file was created. Please edit and update the identity file to start with the correct values of username and password. The first

  When the launch identity file update is used to start the server, these new values are encrypted.

  weblogic.security.SecurityInitializationException: authentication refused: Boot identity not valid; The username and/or password of the identity (bo boot

  OT. Properties) is not valid. The identity of start-up may have changed since the identity of boot file was created. Please edit and update the spirit of boot identity

  h the valid values for user name and password. The first time that the identity of starting update file is used to start the server, these new values are encrypted.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  Truncated. check the log file full stacktrace

  Caused by: javax.security.auth.login.FailedLoginException: [Security: 090303] authentication failure: User epm_admin weblogic.security.providers.authentication.LDA

  PAtnDelegateException: [Security: 090295] caught unexpected exception

  at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)

  to com.bea.common.security.internal.service.LoginModuleWrapper$ 1.run(LoginModuleWrapper.java:110)

  at java.security.AccessController.doPrivileged (Native Method)

  at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  Truncated. check the log file full stacktrace

  >

  < 14 August 2013 9:26:44 AM MST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >

  < 14 August 2013 9:26:44 AM MST > < error > < WebLogicServer > < BEA-000383 > < a criticalservice failed. The server will shut down >

  < 14 August 2013 9:26:44 AM MST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >

  I deleted the password and user name in the folder Admin Server and bi_security1 boot.properties, but no use. Another option, I deleted boot.properties then in bi services guest entered weblogic server user name and password. Now also the same question.

  Please help me to solve this problem.

  Thank you

  To change the Weblogic Username and password that is saved in the file boot.properties

  Thank you

  Madhu

• page link text disappears when the link is run

  I have a page with lots of links and e-mail links on page 2 Web using Dreamweaver CS5.5.  During the test, I was able to first see the text for all of the links on the page.  Whenever I click on a link, the text so that it is empty, but the link works fine.  After that, there is an empty space on the page where the link text had been, but when the mouse enters it, the link is displayed and can be run again.  He NEVER comes back.  I can't test on another computer and initially, the text is there but not after execution of the binding.  It's as if the text is just sucked out of the page.  Here is the link to the page that I have tested.  I used Insert > Email to put in place email links and typed in links to web pages 2.

  http://www.graceavenue.org/new%20Site/view/missions.htm

  Where the text goes and how can I keep him?

  Thank you, Susan

  I can provide the source code if it would help although it is available in the view > page Source.

  Here is the css of the page:

  {body
  background-color: #FFFFFF;
  left margin: 0px;
  margin-top: 0px;
  margin-right: 0px;
  margin-bottom: 0px;
  do-family: Tahoma, Geneva, without serif.
  do-size: 12px;
  line-height: normal;
  Color: #000;
  padding: 5px;
  }

  TD {}
  do-family: Tahoma, Geneva, without serif.
  do-size: 12px;
  Color: #000000;
  line-height: normal;
  margin: 0;
  padding: 0px;
  make-style: normal;
  make-weight: normal;
  }

  a: link {}
  color: #000090;
  text-decoration: none;
  do-size: 12px;
  make-style: normal;
  line-height: normal;
  make-weight: bold;
  }
  {.sitelink}
  do-family: Tahoma, Geneva, without serif.
  do-size: 12px;
  make-style: normal;
  make-weight: bold;
  color: #000090;
  }

  a: visited {}
  color: #FFFFFF;
  text-decoration: none;
  }
  a: hover {}
  color: #000090;
  text-decoration: underline;
  do-size: 12px;
  make-style: normal;
  line-height: normal;
  make-weight: bold;
  }
  a: active {}
  color: #000090;
  text-decoration: none;
  do-size: 12px;
  make-weight: bold;
  }

  {.h1}
  color: #C00000;
  font size: 24 PX.
  do-family: Tahoma, Geneva, without serif.
  make-weight: bold;
  line-height: normal;
  letter-spacing: 1px;
  make-style: normal;
  text-align: center;
  }

  . H2 {}
  do-size: 18px;
  do-family: Tahoma, Geneva, without serif.
  color: #C00000;
  make-weight: bold;
  make-style: normal;
  text-align: center;
  }
  {.h2b}
  do-size: 18px;
  do-family: Tahoma, Geneva, without serif.
  Color: #000000;
  make-weight: bold;
  make-style: normal;
  text-align: center;
  }

  . H3 {}
  font size: 24 PX.
  do-family: Tahoma, Geneva, without serif.
  Color: #000000;
  make-weight: bold;
  make-style: normal;
  }

  {.h4}
  do-size: 14px;
  do-family: Tahoma, Geneva, without serif.
  Color: #000000;
  make-weight: bold;
  make-style: normal;
  }

  . H5 {}
  do-size: 14px;
  do-family: Tahoma, Geneva, without serif.
  color: #C00000;
  make-weight: bold;
  make-style: normal;
  }

  .i {}
  do-size: 14px;
  do-family: Tahoma, Geneva, without serif.
  Color: #000000;
  make-weight: normal;
  make-style: italic;
  }

  .i2 {}
  do-size: 12px;
  do-family: Tahoma, Geneva, without serif.
  Color: #000000;
  make-weight: normal;
  make-style: italic;
  }

  .p {}
  do-family: Tahoma, Geneva, without serif.
  do-size: 12px;
  make-style: normal;
  line-height: normal;
  make-weight: normal;
  Color: #000;
  }
  . TD {}
  make-style: normal;
  do-size: 12px;
  do-family: Tahoma, Geneva, without serif.
  }

  {#wrapper}
  Width: 1000px;
  position: relative;
  margin-left: auto;
  margin-right: auto;
  }
  {.pbold}
  do-size: 12px;
  make-weight: bold;
  }
  {.pictureright}
  padding-left: 10px;
  padding-top: 10px;
  padding-bottom: 10px;
  }

  {.pictureleft}
  padding-right: 10px;
  padding-top: 10px;
  padding-bottom: 10px;
  }

  {.tdbold}
  do-family: Tahoma, Geneva, without serif.
  do-size: 12px;
  Color: #000000;
  line-height: normal;
  margin: 0;
  padding: 0px;
  make-style: normal;
  make-weight: bold;
  }

  . SM {}
  do-family: Tahoma, Geneva, without serif.
  do-size: 9px;
  Color: #000000;
  line-height: normal;
  margin: 0;
  padding: 0px;
  make-style: normal;
  }

  Not too surprising, really.  This is what happens when you have white text on white background links.

  {body

  background-color: #FFFFFF; / * It's white * /.

  }

  a: visited {}

  color: #FFFFFF; / * It's white * /.

  text-decoration: none;

  }

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• How download Photoshop CS6 when the link does not appear on my account more?

  Hello,
  I have Adobe Photoshop CS6 Extended Student and Teacher Edition.It's the last version you could have without paying each month for Photoshop suscription..
  I would like ton reinstall it on my computer as Bridge doesn't work anymore.
  But i can't download again my software because there is no link anymore on my account
  Please help...
  
  Thanks a lot!
  			 
  Hello
  You can use the link here Download Adobe Creative Suite 6 applications
  Let us know if this helps!