Using the switch GS105E

Similar Questions

• internet connection sharing by using the switch

  I want to share the internet connection using the ethernet switch. the process is the dsl connection to connect to the switch, and then using the ethernet cable, I connect to the computer 1 & 2. the problem is when there is internet connection for comp 1, comp 2 did not and vice versa

  This is because you do not need a 'Switch' - instead, you need a "router".

  A router provides a NAT (NAT) function that will allow more than one device share an Ethernet connection.  If you wish, you can connect a switch out of your router, but cannot connect a switch directly to a DSL modem and expect it to work for multiple devices.

  HTH,
  JW

• How to activate Bluetooth using the switch wireless on dell inspiron 3542

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop 'Dell inspiron 3542 run ms windows 8.1. Please help me!

  How to activate bluetooth dell 3542

• How to activate Bluetooth using the switch wireless on dell latitude e6420 (early 2011)

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop "Dell Latitude e6420 run ms windows 8.1". Please help me!

  Your variant of the system doesn't have the Dell Wireless 380 card and that's why it will fail to install.

  Install.

  A21 OF THE BIOS:

  http://downloads.Dell.com/FOLDER01853317M/1/E6420A21.exe

  See notes about the update of the BIOS http://dellwindowsreinstallationguide.com/updating-the-bios/

  Free fall sensor:

  http://ftp.Dell.com/FOLDER01679418M/5/St-MICRO_FFS-LNG3DM_A06_V6681_setup_ZPE.exe

  Intel Chipset Device Software:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=Intel%20chipset%20Software%20Installation%20Utility

  Intel Management Engine Interface driver:

  http://downloads.Dell.com/FOLDER01232584M/2/SWB_DRVR_ME7P1_5M_7_1_70_1205_MR_A05_SETUP_ZPE.exe

  O2 card reader Micro:

  http://ftp.Dell.com/FOLDER01481873M/1/Chipset_Driver_CY8D1_WN_3.0.08.18_A01.exe

  Utility Intel Identity Protection:

  http://downloads.Dell.com/FOLDER00705710M/1/Chipset_Driver_NGH46_WN_1.2.27.0_A05.exe

  Intel Wireless N-6250:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  Intel N-6250 Bluetooth:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034060.htm

  Touchpad:

  http://downloads.Dell.com/FOLDER01669864M/1/Input_Driver_VW486_WN_8.1200.101.134_A07.exe

  Audio

  Integrated

  Driver Intel Ethernet:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24198/A08/LAN_Win8.1_64_19.5.exe&lang=eng&DwnldID=24198

  Intel Video:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24329/A08/win64_153330.exe&lang=eng&DwnldID=24329

  Video NVidia:

  http://www.nvidia.co.UK/download/driverResults.aspx/80210/en-UK

  Intel Device Manager Diagnostics utility:

  http://downloads.Dell.com/FOLDER01433785M/9/DIAG_Network_Intel_A09_x86-6DDVX_setup_ZPE.exe

  Application of Control Point System Manager:

  http://downloads.Dell.com/FOLDER35332M/1/APP_WIN_R312259.exe

  Let me know if all errors remain in Device Manager.

• Trasnfer blackBerry 10 data saved BlackBerry OS7 to Andriod using the switch of the device

  Is it possible to transfer data saved using switch of the device, Blackberry OS7 running on Andriod phone?

  Help, please! Thank you!

  No, the switch device app goes beyond data transfer on a device BlackBerry 10 only what it is built to help users MOVE for BlackBerry 10.

  Webcast of switch device: BlackBerry OS smartphone to smartphone BlackBerry 10

  Switch appliance Webcast: OS Android smartphone to smartphone BlackBerry 10

  Switch appliance Webcast: iOS smartphone BlackBerry 10 device

  See you soon!

• Packets lost when you use the switch

  I'm totally stumped on this one.  Can anyone think of a reason why I would be a 25% packet loss when ping between the two machines on my network when it is connected through a switch and 0% packet loss when it is connected through a normal hub?  This translates into the loss of connection hosts frequently.

  I have two ESX hosts, a VC and a storage server network through a switch Dell 2216 shared.  This is just a small test network to help me to learn and experiment.  Choose any machine in this configuration and ping to any other and you encounter ignored packets.  Exchange the switch with a hub and the problem is solved.  I have tried a different Dell 2216 and even went and got a Cisco catalyst 3550 on shelf with no configs, to rule out a defective switch.  Still no packet loss.  As soon as I plug the rear hub, zero problems.

  I checked the NIC detection automatic speed and duplex and even forced a full 100, 10 half full and 10, just to make sure.  all experience packet loss when no switches are used for network devices.

  There was a similar mail yesterday that sounds the same to me:

  http://communities.VMware.com/thread/208724?TSTART=30

  Someone suggested in this thread, I tried deleting the agent of one of my hosts and add new to VC with no luck.

  Someone suggested also a DNS problem that seems promising.  I have nothing acting as DNS server right now and none of my guests or VC have all assigned if DNS servers.

  Thanks for any help anyone can provide!

  What is the result of

  cat/etc/sysconfig/network-scripts/ifcfg-vswif0

  Try manuly adjusting the last byte and restart the network. I'm actually kind of curious to know if it will work.

  Or visit http://communities.vmware.com/thread/134858

• FTP creates and deletes the temporary instead of the download file when you use the switch S:

  We use Windows 2008. There is a strange problem to start the FTP., receive a file.
  I can receive the file when the command line GET command. When I use the file with the command (ftp - s:Filewithcommands.txt), ftp creates a temporary file and remove it automatically without doing the real download.
  Thanks in advance

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en/winserverDS/threads

• Throw after error while using the switch inside the ProductLookup... ?

  Hi all
  
  When you use droplet of switch with release of ProductLookup droplets, throws following error...
  
  code-
  
  < name dsp:droplet = "/ atg/commerce/catalog/ProductLookup" >
  < name = 'elementName' value 'product' = dsp:param / >
  < name dsp:param = 'id' param = "productId" / >
  < name dsp:oparam = "output" >
  Product is new? -param = "product.new" dsp:valueof / >-here it gives false... but the error happens when you use droplets of switch
  < name dsp:droplet = "/ atg/dynamo/drop/Switch" >
  < name dsp:param = "value" value = "true" >
  < name dsp:oparam = "false" >
  This product is not new
  < / dsp:oparam >
  < dsp:oparam name = "true" >
  This product is new
  < / dsp:oparam >
  < / dsp:droplet >
  < / dsp:oparam >
  < / dsp:droplet >
  
  
  errorMessage-
  
  
  2012-11-29 19:44:54, ERROR 312 [org.apache.catalina.core.ContainerBase. [JBoss.Web]. [localhost]. [chi]. [jsp]] Servlet.Service () for servlet jsp threw exception
  org.apache.jasper.JasperException: product/inc/product_inventory.jsp(96,3) according to the TLD, dsp:param of the tag must be empty, but is not
  
  
  
  Thanks in advance,
  Laurie Bovilla
  
  Published by: Laurie B on 29 November 2012 06:22

  You should do like this in the drop of switch:

  
  
  
  
  Product is new? - -Here is giving fake... but the error happens when you use droplets of switch
  
  **
  
  This product is not new
  
  
  This product is new
  
  
  
  

• BlackBerry BB passport do not import emails using the Devicde of Bold 9900 switch

  I tried using the switch of the device several times to transfer all the data from BB9900 for the new Passport SE

  I created all the e-mail accounts & passwords on the Passport exactly the same as on BB9900

  I upgraded to the latest version of the software on Passport SE

  I followed the instructions for the control unit switch, it makes his work and said everything is done.

  All I get on the passport of BB is like my contacts, notes, texts, calendar etc.

  What I don't understand is all my emails stored on BB9900

  I tried to go back and manually restore from the backup file created during the switch of the device, when I click on restore to custom, there is no option to import e-mails here at all.

  One thing that is strange, in the hub when I click on it to "mark prior reading", he tells me to 1200 + emails will be marked as read so it seems that the old emails are there (I have almost as many new emails on the Passport), but they are not displayed.

  Bottom line, how to import the EMAILS ONLY from a device BB7 to Passport?

  JBPassport wrote:

  Or is it just BB10 o/s does not allow for email message storage at all?

  Correct ^^.

• How can I do a silent install of Firefox 23 because the switch - ms does not work?

  I was able to do a silent install of all the previous versions of Firefox by using the switch - ms. But when I use it on the new version, the user interface comes up and he has never done this before. I tried different silent switches but non of them work.

  Not the most experienced at this, but you use the stub Installer, perhaps you can try the classic installer and try again?

  Hope this helps.

  • https://www.Mozilla.org/en-us/Firefox/all/ < = full installer

• How can I disable the Switch-to-Tab function? -I need to open multiple tabs in the same place...

  I need to keep several versions of the same site opened at the same time, and then switch between them... Apparently the Switch-to-Tab function will not allow this and keep my duplicated tabs become other Web pages...

  You can turn it off by using the switch to tab no Add on more - https://addons.mozilla.org/firefox/addon/switch-to-tab-no-more

• Best wireless network installation with the switch TP-Link

  Hi all

  Few question numpty maybe, but what follows... We just moved to a new (larger) home with thick walls and I want to set up a new wireless network.

  The current installation is:

  Fiber cable entering the House in the basement and connected the modem to the service provider that provides 150 mb internet. I changed the capacity wireless on the ISP's modem and connecting an airport extreme (2014 model) via the LAN to the modem. The extreme is in the office but on the 3rd floor is having connection problems than you can imagine. All rooms have access points CAT5e who all meet in the basement. I have two spare Aiport express and two Apple TV that I would use. Also I bought a TP-LINK 1000mbps (16 channels) Network Switch.

  Could someone please tell how the best set-up of my home network. For example, the Airport Express to the 3rd floor connected to the switch (wired) network or to an extreme in the Office? Apple TV also connected to the network switch?

  I would like to end up with a solid wireless network that passes without problem from extreme to Express necessary each time you walk and you want to use an Apple TV for television on the ground floor and one in our room.

  Many thanks and apologies once more for this very basic question... I have expanded my front (extreme Express) wireless network but just don't know how best to use the switch.

  Thank you

  The simplest up set... which is almost always the best game in place... would be to connect the switch 16 ports to the modem/router and then connect devices to the switch. In other words, if your modem/router has 16 + Ethernet ports, the simplest network configuration would be to plug as many devices as possible directly to the modem/router.

  Other variants are possible, for example, the network might look like this:

  Internet > Modem/Router > AirPort Extreme > switch > devices... or, you can connect certain devices to ports Ethernet on the AirPort Extreme and some to the ports on the switch.  One thing to keep in mind however... If there is a problem... Troubleshooting may not be easy since it will be difficult to know where the problem actually lies.  Much easier to all have, or of possible devices, connect to the switch.

  Unfortunately, the AirPort Express devices will be of real bottlenecks on your network.  These devices are notoriously slow as well as wireless, and even if they work well, the speed will be does not exceed 100 Mbps... since it's the speed of the port to the AirPort Express.  In fact, I expect each Express to provide a wireless signal in the range of 50-60 Mbps.

  Another thing to keep in mind of the wireless network is that Macs will usually a good work of tilting automatically to the point of wireless to the other as moving from one place to the other in the House... but the iPhones, iPads, PCs, and other mobile devices will do that very well... If they do at all.

  So with these devices, you will need to get used to temporarily disable the WiFi on the device and the device when you move in one region to the other, and then turn WiFi on must generally then pick up the signal from a nearby wireless access point.

• No LAN after the switch mode user or sleep on Satellite L555-135

  If it can help someone,
  I had some problems after my L555-135 of wake-up after a sleep or when I used the switch user on Seven 64 mode.
  No network detected.

  I can't find any update on the Toshiba site or windows update.

  I download from the realtek site this driver and everything is OK now.

  http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=7&level=5& Conn = 4 & DownTypeID = 3 & GetDown = false

  It is really strange and shouldn't happen with the original preinstalled recovery image. All images are tested.
  In any case, thanks for the info and the link.

• using the statement and pagebox to spend

  I am very new to javascript, but I'm trying to write a small script to provide automation based on the size of the page.

  I know that my current document is one of the cases listed, but I can't get the switch statement below to acknowledge.

  Any help would be greatly appreciated. I use Acrobat Pro 9. Thank you

  function test() {}

  var pSize = this.getPageBox ("Crop");

  App.Alert (pSize, 3);

  {Switch (psize)}

  case '0,612,792,0': //A

  App.Alert ("Page size", 0);

  break;

  case '0,792,1224,0': //B

  App.Alert ("B size Page", 0);

  break;

  case '0,1224,1584,0': //C

  App.Alert ("C size Page", 0);

  break;

  case '0,1584,2448,0': //D

  App.Alert ("D size Page", 0);

  break;

  by default:

  App.Alert ("size of the Page Not Found!", 0); / / do this if all else fails

  break;

  }

  }

  You can try to convert the table to a string using the switch statement:

  var pSize = this.getPageBox("Crop");
  pSize = String (pSize);
  // Now, use switch statement as you have it.
  

• I still use the Microsoft Office for Mac 2008. I want to upgrade. Can I switch to Office for Mac 2011 (still available? or do I have to get Office for Mac 2016?)

  "I'm still using Microsoft Office for Mac 2008 Home & Student Edition). I want to upgrade. Can I switch to Office for Mac 2011 (still available?) or do I have to get Office for Mac 2016? I use WORD and have a large number of documents created in my genealogy.

  Office 2011 always works, even with El Capitan. If you go to the office 2016, then you can only buy the annual subscription $ 99.00 / year. Office 2011 can be found for $139.00.

  If you do not require 100% compatibility, you can use the Free Officefree software.