HP 7525 causes my internet connection to stop when the 7525 is on
I use:
PC _ HP Pavilion P7-1451
64-bit Edition of Windows 8
Cisco WRT400N router
Printer HP 7525
I just bought the 7525 yesterday. No problem installing it through my router. When the printer is powered but not in use, my PC (3 ones separated in different rooms) lose the internet connection after a few laps short irregular time. I have to unplug the router and the modem and then reconnect them to re-establish the internet connection. The recommendation of this group, I have reset the printer to a x.x.x.250 IP static. The printer connects very well and I can print from the PC.but meant few PC again lose the internet connection. I then set the modem and the router. When I turn ther printer off, the PC stay connected to the internet.
I had zero connect problems with this router since I bought it a few years ago. The problem only occurs when the printer is on.
Obviously, it's a royal pain in the anus. Help!
We will set a static IP address AND an external DNS for the printer:
-Print a the front of the printer Network Setup Page. Note the IP address of the printer.
-Enter the IP address in a browser to reveal the internal settings of the printer.
-Choose the network tab, then wireless along the left side, then on the IPv4 tab.
-On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
-Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
-Enter the IP of your router (on the Page of the Network Config) for the gateway.
-Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
-Click 'apply '.
Now, stop the router and printer, start the router, wait, and then start printing.
Tags: HP Printers
Similar Questions
-
I lose the internet connection
Window vista Home premium intel core 2 quad CPU q6600 @ 2.40 ghz, 3.00 GB ram the System 32-bit
The internet connection is lost when the computer puts itself to sleep after that idlen too long time needs to restart to re-establish the connection
Hello
Control Panel - device - network - manager double-click the used network - power management device
Tab - uncheck the computer to allow him to turn off the device.Control Panel - Power Options - check at each change of diet Plan - change Plan settings - advanced
Power settings - check the settings there.You may reset the default power Plans and and then change them as needed.
How to restore the default power in Vista (and then go back and change as you wish)
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Windows Update causes internet connection to stop working
I installed the recommended Vista updates last night and this caused my internet connection, to stop working. This has happened to both of my HP laptops. I was able to work around this problem by going to a previous restore point but worry about future updates, causing the same problem. Please notify.
Hello
Use a wired connection to download the latest drivers or download on another computer
and transfer them to this one on removable media such as CD, DVD or USB drives.Control Panel - device - networks - WiFi - Manager write down of the brand and model, and then double-click
on the drivers Tab - get the version number. Then double click on update drivers (this can do nothing
that MS is far behind the drivers of certification). Then make a right click on the device and UNINSTALL - REBOOT - it
will update the driver stack.Now, go to the system manufacturer and search for updated drivers, this will be your fallback. Then go to the Site of the manufacturer of the device
and look for the even more recent drivers.Download - SAVE - go to where you put the driver - CLICK RIGHT to it - RUN AS ADMIN
(repeat on the site of the manufacturer of the device)Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlI would also turn off AutoUpdate for drivers. If the updates Windows suggests a just HIDE as they
are almost always old, and you can search drivers manually as needed.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
-
original title: error 5 access denied firewall
Failed to start service Windows Firewall/Internet Connection Sharing (ICS) on the local computer. Error 5: access is denied. »
Hi vipin sharmavg,.
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
See the below Microsoft article and try the steps mentioned, check if it helps.
You cannot start the Windows Firewall service in Windows XP SP2
-
Hi all
I had problems with my Toshiba Satellite A665 to internet connection. Lately when I try to connect to the internet, for the first minute or so it says 'No internet connection' (or something similar). Basically, he has the yellow warning triangle. Sometimes I can open the browser and search normally, but other times - and this happens more often it won't let me use my browser. When I have not fix the problem, he said that the DNS server is not responding. The problem is this same error happens all. unique. time. and the other computers in the House connect to the internet just fine. I called TWC and what I get on their part, it is "there no reported outages in your area. Useful, right? Tends to be gnawed by the use of Netflix and Hulu Plus, but this has never kept internet bandwidth to work in the past. What is going on? I'm so tired of having to go all the way down the stairs to reset the router every hour (on a good day) to get the computer to connect to the internet.I contacted Toshiba and they say that all the drivers on your computer are up to date and nothing is broken. I have also not downloaded or installed anything on my computer.If the reset of the router fixes the problem you should probably watch that as the culprit. Check the software/firmware for the router and see if you can borrow to someone router to test.
I hope this helps.
-
HP ENVY x 360-15-w100nt: wi - fi connection slows down when the charger is not plugged
Hello
My wi - fi connection slows down when the charger is not plugged in. Correct the wireless lan drivers. So far, I appreciate all kinds of advice for this problem.
Thanks in advance
Hello @JohannNewma,
Welcome to the HP support community! I read your post and wanted to tender hand can help you!
I understand that you notice a decrease in speed wireless on the x 360-15-w100nt laptop computer ENVY when running off the battery voltage.
You can check and adjust the power options on the system as it is probably trying to save battery power by reducing wireless performance.
If you're still having problems, you can follow the steps described in this document to troubleshoot the network settings and internet wireless.
Please get back to me how that happens. To show that you like, or are grateful for my post, please click the Thumbs up below.
Thank you!
-
BlackBerry BB Z10 Z10 stops when the battery indicator shows about 35%
Z10 BB stops when the battery indicator shows about 35 percent without any warning. Does not illuminate until the charger is plugged. Immediately shows charge remaining 40% +.
Please advice.
Stephen
Hello
Here is a solution I tried after lookng through various forums and type of works for me. A common thing in most of the solutions is to take the battery and sim card out, leave like this for 1-2 hours and put them, I found back in and turn it on. I'm not sure of the logic behind it, but I remember reading that this overshadow the phone battery problems (connected incorrectly - essentially a reset) and begins to charge.
I tried it 2 days back and I see that it worked for me, at least until now. I cross my fingers.
I hope it's useful, works at least for few of you.
Thank you all for the suggestions.
-
Satellite Pro L500 - stops when the power cord removed
Toshiba Satellite Pro L500 stops when the power cord is removed even with the battery to 100%. I removed the battery and all the indications associated with battery answer correctly. For example turns off, Toshiba Health Monitor also indicates when the battery is removed. If installed Health monitor indicates that the battery is at 100%.
Someone please help. I have not installed anything new.
Hey,.
For me, the matter is clear: the battery can't hold a charge so the laptop will be shut down because it has no power.
I think you need to replace the battery with a new one and you can get a provider of service authorized in your country. Simply contact the guy and ask that they can tell you how much it would cost.
You can find a list of all FSA here:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service providerGood luck! :)
-
Satellite Pro L10: CMOS clock stops when the OS is not running
Hello
We know a reason why the cmos clock would stop when the operating system does not (phone off), the laptop is 18 months old, I've updated the bios tries to give him a good boost, but no effect, he was also in charge for 24 hours.
Any advice would be great.See you soon
PaulHello
Usually if the BIOS date/time is wrong and always changes, the RTC battery which is mounted on the motherboard fails.
In this case the CMOS battery needs to be changed or maybe only removed for awhileIf your laptop is 18 months, the guarantee must be valid.
Generally if you have registered on the page of Toshiba notebook the warranty covers all repairs for about 2 years (24 months).In this case, I would recommend contacting ASP in your country, because the technician must be able to solve this problem very easily.
Good bye
-
Hi all
I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer cuts automatically to the bottom when the lid is closed, losing all Web pages, and for some reason, some background, I've saved. (My browser is Mozilla Firefox and it prompts you to restore me the tabs lost, which he will).
The led standby does not blink or light up when the computer is turned on, it will turn on only at startup. At startup, the login page is displayed, and after that I entered my password it takes about 15 to 25 seconds to load and open my account. What is going on?!
Summary:
Stop when the lid is closed,
Loses the background image & open Web pages.
Standby blinks only when starting,
Time of loading extended after logging into my account.
Any help would be greatly appreciated! Thanks a lot for reading.
uhlexia wrote:
Hi all
I recently had a new hard drive installed in my 2012 13-inch MacBook Pro. I am running El Capitan 10.11.2. Since then, my computer turns off automatically when the lid is closed.
Take it back to the repair as well as your receipt of repair shop. Apple has a 90 day warranty on all repairs.
-
New Yoga 14 stops when the lid closes
I just got a new series of Yoga 14. Sometimes, but not always, the laptop stops when I close the lid, even when it is plugged. I already looked at the option to 'choose what happens when the lid is closed' and it is set to sleep, no downtime.
Any ideas on how to solve this problem.
Hi Nickajeglin,
Welcome to the Forums
According to the request, we understand that you are facing problem with the system stops when the lid is closed in your Lenovo 14 yoga.
As you mentioned that you have changed the setting to sleep, try changing to do nothing option and check also the question, if still the issue persists then uninstall and reinstall the power management and check the issue.
Click here to for 10 windows power management.
Let us know the result.
Best regards
Ashwin.S
-
While the loop does not stop when the two values are equal using equal to comparitor
Hello world
I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!
However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.
It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!
I am very confused!
See you soon!
Search on: comparison of floating-point numbers
The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.
Mike...
-
Explorer.exe stops when the computer is shut down
Explorer.exe stops when the computer is shut down
Hi DickKimberley,
· What exactly happens when you try to shut down the computer?
· You receive an error message error code?
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check.
Advanced Troubleshooting for shutdown problems in Windows XP
http://support.Microsoft.com/kb/308029
Method 2: If the method above doesn't follow the article mentioned below.
Windows stops responding during Windows XP shut down
http://support.Microsoft.com/kb/307274
Let us know if that helps.
-
computer Vista laptop does not stop when the lid is closed
I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy
Hello banditpunpun2,
Thanks for the return of the response. I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS. I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.
Please let us know status.
-
Dell inspiron w / xp sp3 stops when the lid closed only in mode standby
Dell inspiron e1505 on windows xp sp3 will stop when the lid closed mode standby. In "idle mode" it shuts down for a few seconds then screen turns on and I can work as usual. Why is it turn off in standby mode? Happens in AC mode and battery. is it a software problem or a hardware problem. I see others with the same problem and vista dell.
Dell support.
Contact Dell
http://en.community.Dell.com/forums/
Dell forums
XP forums:
http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP
Link above is for XP Forums.
There is a list of the different Forums XP to the link above to help you.
You get the help you need there.
Here is the Vista Forums.
See you soon
Mick Murphy - Microsoft partner
Maybe you are looking for
-
I'm having this problem, everytime i click a link on other program, like the program's link on the about tab, or a youtube link on Live Messenger, it won't open, a dialog pops up saying firefox is already running and not responding, but it is there,
-
Tecra M1: Need a compatible CD/DVD player
Hi guys. I have a second user M1 windows XP SP2, the dvd - rom drive has been temprmental (sd-2612)I tried a cd-rw/dvd-rom sd-r2512 by exchanging the caddy, but it does not recognize anything in the Bay.Start gives ide #error. If it's not compatible,
-
Satellite L640 - clock stuck CPU idle time
Hi people, I have a Satellite L640 PSKOLA, with a processor i5 480M and am under Win7 64 bit, I have a "CPU usage" widget on the desktop, because clearly, I'm kinda a nerd. I first noticed this problem for a long time, but my usage has changed more t
-
Y510 unable to get data from the camera.
Hello I have a Y510 with Windows Vista 32 bit, 3 GB RAM, only 5 weeks. I get this message when I try to use Veriface, "unable to get data from the camera. The camera may have been disconnected or busy. I reinstalled Vista of the State in which the la
-
another directory system32 under windows/system32 directory
I noticed another system32 directory under my/windows/system32 directory. I don't know how it got there, maybe installed by an application. Is it necessary we can remove it. Seems to contain a subset of the files in the system32 directory real