Personal firmware roadmap priorities

Similar Questions

• Store TV + firmware and Samba

  Since there doesn't seem to be much interest at Toshiba to straighten their firmware that I looked for other options. In another post, I found that the Stor.e TV + and Noontec V8S are basically the same. I've studied this and this seemed to be the case.

  OK, so I took the risk and updated the firmware of my Stor.e TV + Noontec V8S latest firmware website noontec V3.0816.13_V8S.

  The update went well without a hitch (took about 2 minutes of an old drive flash 256 MB connected to the back of the USB port on the unit, because I formatted before using it) and some of the irritating downsides of the Toshiba firmware has been resolved. Samba has worked in some way, but I was still not able to download songs directly on the Stor.e more wireless, which is the only other feature I need currently. The irritating remote control buttons were replaced by how any sane person could use them (I had changed my universal remote control to correct this, will have to change the settings if I kept the updated firmware) the new firmware seems solid, but I do not USE THE CAPABLITIES VIDEO, so I can't comment on that.

  A major drawback of this update for me, it's the small screen of the device to become much less readable. Looks like there is a problem with the police on the new firmware. I use my Stor.e only as a music player flac, and since I don't have it connected to a TV the small screen is essential for me to select tracks or discs. I have 300 + discs, the Stor.e is an excellent cheap media player, which connect me to my STEREO through a DAC system.

  I therefore had to change to the firmware of Toshiba to correct this display problem and stopped trying to get sorted Samba. Looks like I'd still use USB to download music to the Stor.e when I buy the new CD. What a pity.

  Either by the way, the new firmware of Toshiba is very similar to the old firmware, in what is lacking the possibility to start the Samba. In the readme file, Toshiba says that the new firmware corrects a problem with the network, but I think it's probably the smallest issue that most users have with the firmware of Toshiba.

  UPDATE:
  After some research, I learned that the MVix Ultio is just like the Noontec player, and some users flashed their Noontecs for the MVix firmware successfully. It was much less obvious if the Mvix and Toshiba are the same, the MVix photos different from the Stor.e, but I decided to give it a try anyway.

  So I have the TV Stor.e + updated the latest MVix Ultio (downloaded from the site Web Mvix) 3.12 firmware. Note that it is the standard Ultio, NOT the pro. Also note that with this version you don't have to (and in fact will not be able to) install the drivers of Samba and separate bitTorrent, as stated in the manual. These seem to be only for the Ultio pro and are already included in the standard firmware Ultio.

  This solved all my problems with Samba, and the display with the Noontec firmware problem does not exist with the Mvix firmware. A whim, I noticed with this version of firmware is when I try to open the visit from the Samba browser neighbor he sees not all hard disks. Seems to be a disk formatting question (I formatted the disc via the menu Store) I can see readers on my other Stor.e TV +. I know that Samba still works however, as I can access my Stor.E in exploring through a wireless router (it appears as Venus under Network on Windows 8).

  As I said previously, I use my Stor.e to play .flac files only, so cannot comment if the Mvix firmware has problems with playing other files or formats. I do not think that there will be major problems, even if, as it seems Mvix regularly update their firmware to fix any problems (NOT like Toshiba!)

  If my suggestion to those who want to get the firmware updated for their Toshiba Store TV + is to go for the MVix 3.12 firmware. He can still back up the firmware update from Toshiba (downloadable from their site) if there are problems.

  You do this at your own risk, however, if brick you your unit don't blame me...

• Is the new Amtel Firmware for the issuance of Pen/digitizer turn HP?

  A customer reports and inquires: "there are now an Atmel Firmware upgrade that should help you in the exercise of the feather on your HP revolution. One person at HP with goodness, let me know on this subject. Here is the link:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 51...

  However, a client has tested firmware and reports:

  "Even after you apply the update of the firmware on multiple computers in different configurations, the quality of the writing with the pen is always unacceptable to us. She showed improvement and the buttons on the pen became fully functional, but we managed to get best results on the revolution with a cheaper pen, and nothing came close to the quality of the pen and the screen of 2760 p. "I hope that we will receive a comment from one of the experts.  If this firmware should have addressed the issue of Amtel pen, development will continue on this subject?

  The updated firmware was designed to support the newly released pen. It does not work with the pen that was available with early production units. If you have a new pen (released in recent days) and you are still having difficulties using it on an 810 turn, please open a case of pension with HP. Just FYI, the sensory functionality like a mouse cursor is not supported

• Firmware for Toshiba ODD-DVD SD - R5272

  Dear support,

  I have a Toshiba ODD-DVD SD - R5272 installed in my computer. This drive can write according to technical specification, DVD - R, but my drive, can not because my firmware is outdated. Even after several searches online and on tohsiba-Support pages, I haven´t find any firmware for my ODD-DVD.

  I hope you can give me the latest firmware and software for assigned Flash, SD-R5272, for Windows 7 (64 bit) operating system.

  Thanks in advance.

  Hi SDR5272,

  > Dear support,
  Just for your information: It's just a forum user to user here and no official support from Toshiba. If you can talk with normal people like you and me, and I doubt that someone could give you an update for this drive.

  > can write, but my DVD-R disc can not because my firmware is outdated
  The firmware has nothing to do with it. If the drive specification says that you can burn DVD-R media, you can do. With a new firmware, you can upgrade your player and add new features. It s bug just setting but not more.

  My personal opinion is that the problem is related to the brand of DVD - R. Have you tested different brands? I would recommend medium high quality Verbatim or TDK for example. They are really good and never had a problem with them. :)

• 40L5443DG TV: how to download the firmware no TV?

  Hello
  my internet connection is 3G.
  So, I fear for my smart tv 40L5443DG to connect to the 3G internet.
  I would like to download the latest firmware on a personal computer instead.
  I would also like to know the firmware change log, before update!

  Where can I see for my smart TV?

  Best regards.
  Mike (France)

  Currently you can not download the USB SW update for your model, it can be added at a later stage. Please, use the method to update the network for now.

• HP zBook Studio G3: zBook Studio G3 - DEATH BY INTEL ME FIRMWARE UPDATE

  WARNING!

  DO NOT INSTALL THE UPDATE OF THE COMPONENT OF THE (COMPANY) INTEL MANAGEMENT ENGINE FIRMWARE!

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=8934841 & swItemId = ob_159465_1 & swEnvOid = 419...

  Component Firmware Intel management engine (ME) (American International)

  11.0.0.1194 Rev.A
  December 1, 2015

  We bought 5 of these laptops for our Engineering Department and I was against a tight schedule to get them deployed (the next day). I started working on obtaining a set of installation with the necessary software and then I just want to clone one for the other 5.

  I did a clean install of Windows 10 and installed all the drivers from the HP site. Then I ran Windows updates until everything is up-to-date. I disabled Windows Defender. Now all that remained was update the firmware BIOS, Intel ME and Thunderbolt using the downloaded utilities since the page drivers. The BIOS installed fine, but it's a really weird update process. Due to the beeps and lights blink during his work. There is no progress bar to let you know if she is doing anything. At some point, as the beeping stop but it's still really work. Then he starts and updates another part of the system and so on. Anyway, that everything worked fine. No problem with the update and Windows 10.

  So I ran the update of the Firmware of Thunderbolt and open up a command window saying that it couldn't find the controller. It looks like not there nothing after that point and just closed.

  Finally, I ran the Intel Management Engine firmware update utility. He opens a command window and says that it is loading the file and check and so on. Then he wrote the Flash file and takes a minute or two, doing so. Once it's done, the firm order window and back to business as usual... until you restart. Once you do this, the system is toast. It does not start. Black screen, fans run at high speed and the CapsLock and NumLock bulbs only 5 slow flashes indicating that there is something wrong with the motherboard. I'm starting a supported by HP chat session.

  I am told to disconnect the battery. To access the battery, you need a bit T - 8 Torx and you unscrew 11 screws to remove the grill cover and low fan (pedestal). I did that and disconnected from the battery. Reconnect after a few minutes and tried to start. Nothing, same thing. The support agent told me that a technician on site should be sent to replace the motherboard.

  While the lower lid has been opened, I noticed that there are two small LED lights near the SSD. There are supposed to be the diagnostic lights and I found an article in the service manual indicates if one of the LEDs is lit, the motherboard should be replaced. This lights a few seconds after the connection of the power supply for the laptop or by pressing the power button.

  I asked the support agent if they knew why it happened, but they did not know.

  So, I got 4 portable more to work with. I took off the dead laptop SSD and put a charge in a brand new out of the box. Started by and on the desktop Windows 10. This laptop had BIOS v1.03 on this subject so I ran the BIOS updated and rebooted. All right. At this stage I myself asked to perform other upgrades of the firmware or not. I thought that I had a 50/50 chance and I'm the kind of person that simply be whether it was a fluke or if there really was something seriously wrong with the update of the Intel ME firmware. He ran while first instead of love at first sight to date. Update Intel did ME the same thing before, opened a window to order, checked and then flashed... and after a reboot I got another laptop dead.

  At this point, I shook my head and frowned, looking at the HP logo.

  I tried calling support, but their laptop zbook/computer service has been closed from 10 is no support by phone or chat support. I have to wait until the morning to make a call in warranty for this second laptop dead.

  The Intel ME firmware update released on download of HP ZBook Studio G3 section was not compatible with these laptops and caused the laptop no longer starts. Only an exchange of motherboard could solve the problem. HP since then changed the link to the Intel ME firmware update for the appropriate softpaq.
  
  Those who had run the update of the bad firmware and their laptop brick had to call the HP technical support to schedule a replacement motherboard on the spot.

• color laserjet pro m252dw: How do to return/difficulty recent update of firmware for hp color laserjet pro m252dw as now does not

  My printer color laserjet (color laserjet pro m252dw) no longer works due to not recognize a black cartridge to third because of a recent update of the firmware. Error given is 'Supply memory error'.

  I already looked to the top of the page of Software Support for this printer, but new and recent firmware update is not released/listed, only the firmware upgrade market is given.

  I'd appreciate advice and instructions on how to return/repair my printer no longer print.

  Can you please advise on which firmware update to install instead to get my printer back in the order of operation?

  Thank you very much

  Geertje

  PS: HP: how VERY boring; next time that I'm in the market for a printer I have will conduct the review of my options

  According to the other thread that I have commented on the user managed to solve the problem of roll back firmware version 20160331 to 20150716 .  Unfortunetly the user did not comment if the old version of firmware is out so that we can share a simlilar solution.  It may be that this person had a copy archived in offline mode or found another source outside the HP support Web site.

  At least you can get an older version of firmware all the steps that we share for the firmware downgrade won't do you no good.  I'd be careful to search a German site for firmware updates.  HP has put regional locks in place according to international contracts, that they do to market their products in a given region.  Using a German firmware on a printer WE made may have strange side effects on what types of cartridges are allowed.

  What is perhaps a better use of your time would be to contact your 3rd party cartridge company and see if they can send you a cartridge that is compatible with the new firmware.  Chances are that they have seen the same problem with other users and already have a chipset to work around the problem.  In this way, you can stay on the newest firmware and continue to use your favorite too cartridges.

• New Seagate Personal Cloud does not work on El Capitan

  I bought a new NAS, the Personal Cloud of Seagate. I run El Capitan on a Macbook Pro 13 "retina and I just get an error message saying"Cannot connect"."

  I tried to restart my SIN and my macbook and my router, I have installed all updates possible, try to add the device manually through the IP and nothing works. Is worth mentioning that the macbook to my partner, who still works Yosemite can read and write.

  What can we do? It's so frustrating.

  I just bought a Seagate Personal Cloud and had the same problem.  I'm running a MacMini with El Capitan.  Here are the steps I used to fix it.  Note that there is some use of the Terminal, but it is only during the 1st stage and it was not complicated.

  (1) turn the Seagate, find the label with the serial number.  There are a few other bar codes, said Mac copy this number.

  (2) open the Terminal (using spotlight, terminal type only).  Then type "arp - a" without the quotes.  You will see a list of devices that can see your mac.  The left column is the name of the device.  The Seagate will appear as?, but you can have several.  Find the?  who has the same mac address that you copied down.  This line will also be an IP address (something like 192.168.xx.xx).  Copy down.

  (3) open Safari.  In the address bar, type the IP address that you copied down.

  (4) in my case, safari connected to an Assistant and the Seagate has accompanied me through some steps.  The most important was an update of the Firmware (mine updated the firmware twice).  Then, I created a user to me.

  After this, I restarted Finder (just close all the windows open and reopen) and I could see the 'PersonalCloud' under shared and connect.

  I hope this helps.

• Firmware.621 (Droid 2)

  I just spent 5 hours calling Motorola again and again (explaining my situation and many other customer situations) since their unsatisfactory customer service agents hanging up in my face! I got to level 2 technical support, the guy takes the info down on all the specifications for the firmware that I need flash on the camera once I told them how many people have walled androids now due to their update defective pour.621 & how these clients will not be satisfied by the fact that they must send their Motorola phone for having repaired and sit in a line of million others androids that are waiting to be flashed, after weeks for the device that will be sent back after it is repaired. All I ask is another version of the firmware that all over the internet, they released, they have even contributed to projects open source like that on Google. But they can't provide me with just the firmware.621 for the Droid 2 cover their own ASSES? LOOKS LIKE THEY WANT THEIR CUSTOMERS TO BE HAPPY. BUT I SEE THAT IT IS QUITE TO THE CONTRARY. I will never buy another product from them ever again! EVERYONE TO STEER CLEAR OF THEIR CRAPPY SERVICE. After paying nearly $1,000 USD for their products, they will be hung up on & feed you the same line of nonsense showing the only option 'US' (AS IN A RANDOM underpaid CUSTOMER SERVICE AGENT) have only the ability to refer you to the service of repair service to have your phone BOOK AND NOT GIVEN on A MONTHS. Just think of the time and the pain that they would save a lot of people if they would release just this specific firmware version. I could have done in less than 5 minutes and be on my pleasure getting married, yet feed the mouth of Dan Moloney (President) & Sanjay Jha (President and CEO). Fucking flat back, with service agents speaking English-no customer! I understand even half crap which poured in their mouths! This shows that you, expensive products, cheap crap customer service. THEY ARE ONLY IN THERE TO BURN A HOLE IN YOUR POCKET AND NOT WASTE YOUR TIME WHEN THE PRODUCT YOU BUY TAKES A SHIT WHEN IT OF THEIR FAULT!

  http://RootzWiki.com/topic/25324-SBF-firmware-CDMA-droid-2WE-A956-Verizon-USA-gingebread-234-version-45629
  I am creating a Web site, I have a lot of my own personally-owned virtual private servers.
  I'll make this review on the first page of each android forum.
  Until my demands are met.
  Have a wonderful day.

  P.S, These websites will have wonderful and exceptional SEO. I'll be sure to have someone type this upward in an engineering more appropriate to probe more professional and more convincing. Users will have an option to let your critical comments on my Web sites on ANY specific SP or DM. treat a blackhat as trash, and that blackhat will stop at nothing & involves his techniques in the development of their revenge. When the user types in Motorola on Google, at least that your site visitors more 1 000 000 p/s of different IP addresses. You will not beat my SEO methods. I won't forget and I will not forgive, & I certainly will stop at nothing. Why should I go through all this trouble? The nature of this experience is the same answer to your question as to why. You could not interpret that either answer, but let me clarify that in a more universal response - you have never bothered someone like me.

• Should I update my WNDR3400v3 to the Firmware 1.0.0.48?

  I see there's a 1.0.0.48 updated the firmware on the Netgear site, but control over the router software said: I'm updating even if I'm on 1.0.0.46. Should I update?

  Personally, I put because it is a new release.

  If you have a valid reason, of course, but if things are

  works well, why bother? I don't buy the idea to update

  because it is new. If you think that you have to try, then

  You can do it manually.

• HP P2055dn Laser printer. Firmware update does not work.

  HP P2055dn Laser printer. Win 7-64. USB is connected. Download the appropriate firmware update, ljp2055dn_FW_Update_20120131.exe. Running the file. Select the printer in the dialog box. Printer has been powered up and ready. Bar showed progress update was sent to the printer and concluded successfully, with a smiling face in the dialog box. However, printer doesn't react at all, just keep to indicate loan. When the Self Test / Configuration page, it always shows firmware like 20111214.

  Printer works fine. The update is supposed to fix a security hole.

  Found the answer on the support page for businesses. Buried in the Menu of configuration, to the terms of Service, the last menu item is RFU. This determines if the firmware can be updated. The default value is OFF and LOCKED. It must be put on updating the firmware. After update, it will automatically return to CLOSED and LOCKED.

  It would have been nice if HP put it in the manual, rather than trying to pay $35 for the support of something that should have been documented. Must be a secret or maybe I'm the only person who didn't know what that meant the RFU.

• My PC has UEFI firmware?

  Hello, my product number is B1R08EA #AKS and my series is[personal information deleted]. My HP has UEFI firmware?

  Yes, it is if you have it installed, or have not disturbed the original configuration of the hard drive.

• HP Officejet Pro 8600 N911A: firmware

  I have a HP Officejet Pro 8600 N911a

  Serial No. [personal information]

  Product # CN578A

  Service ID: 23174

  Firmware version: CLP1CN1435AR

  QUESTION: Is the original firmware that came pre-installed on this printer purchased on 06/23/13.

  To be honest, I had problems with the operation of the printers over time, successfully resolved.

  I am led to understand that a later version of its Firmware is available. If that is correct, do I need?

  What are its advantages? How I did it acquire? Will receive installation instructions?

  There are further problems with the new Firmware? Thank you in advance for your help!

  ultimately, here's what happens: I had the chance to find a link on the site of "BD" that has allowed to circumvent the 'salary aid Tech' (involved only) help. For linking real chat... I got a tech, explained what was going on, he asked me to open Bitdefender a page says, asked what he's been selected... then instructed me to change about 3 settings. "BD" to close and reopen it... then try to access then asked me to test the "computer scan"... It worked like a charm! Apparently, BD software with the settings of the Moose saw an intrusion unauthorised and killed the linlk from computer to printer/scanner and killed the link.

  Once, I didn't know what to do in the future, everything worked fine... I can't tell you how many hours I spent with other BD technicians and HP is trying to solve this problem.  So, now I can place a document (etc.) on the printer scan window, go back to my computer open the link and the Voirledocument and adjust the scan size, part of the image, size and other graphic possibilities.    Because by sheer luck, I found a link to chat with a technician who knew their product and in a few minutes (not hours) directed me to a resolution that no cost me $ $ no matter what.

  Than k you, Lucien of Bit Defender!

  FORGET THE TECHNICIANS 'FEE' OF THE PHILIPPINES... (FOR REASONS I will not GO IN, I'M FLUENT IN 2 DIALECTS OF THE FILIPINO LANGUAGE - TAGALOG & ILANCANO), EVEN WITH THAT HAVE TOOL, HP 'TECH' could FIND THE TOILET WITH A TORCH!

  Message to MEG WHitman... Unload your stock, sell the House and get out of here before its TOO LATE.

  Even a deaf, dumb and blind person can comprhend this situation... Fill in the blanks...

• I don't get my firmware or software updates. I see that someone has registered my computer as a workgroup computer and I have no right administrative no matter what I do

  No update software, no firmware updates...
  All parameters must be set up whenever I connect... Security etc...
  There Samss and about 15 svchost.exe, WUDFHost?, Netman, homegroup x 2, amd Blutooth?

  I reconfigured Vista 3 times and installed a clean copy of 7, but it must be in the BIOS or illegal product? The two return to the initial setting. (even after I reconfigure my hard drive). (I can modify manually on each file and even in the Panel administrator rights, but each change back!) I believe that when I shut my computer down start installation has been reconfigured with a backdoor.exe.  How can I get this person from my computer! I tried all the spyware, malware, etc... but it does not detect the "domain servers with functions of remote logon" and spies. Also, I used my personal card broadband since the date of purchase, but I don't really use this card that my supplier tells me. I'm tunnelling through their server. (Still a thing... they live 20 feet away!) Help!

  Wheretostart,
  I'm a little confused about what exactly it is you are having problems with and are trying to accomplish.  However I will try to answer the items you listed.

  1.) your BIOS update is something you need to do by using the machine to motherboard\PC.  They will provide the update to the BIOS and would be able to provide assistance to that.

  (2.) what software you are trying to update?  If you try to update 3rd party programs, then you will need to check with the software manufacturer for updates to the software.  If you want to update Windows, and then run the Windows Update program that is located in the section of all programs from the Start Menu.

  (3.) where you see these processes and how are you trying to start?  Also copied the names of them exactly?  I'm unable to find information about most of them.

  4.) it's always good to be protected but having more than one installed virus\malware can cause problems.  You must make sure that only your program main virus has anything from when Windows starts.  Also I would recommend do not use Registry monitoring programs.  Sometimes they can do more harm than good.

  5.) If you did a clean install of (I assume) Windows 7 and have not installed all the programs, then you must run the System File Checker to verify the integrity of the operating system.  If you have already installed other programs then I suggest running a clean boot and check the results.

  6.) don't know what you're trying to accomplish here.  BIOS will not help you to partition your drive.

  Finally, if you're just trying to get your system up and running without virus here, is what I would do if it was my computer:
  Disconnect from the internet.
  Factory restore; Download the system to the status of day a "out of the box.
  You may need to connect to internet to register Windows, but then I would unplug again.
  If at this point you have an upgrade to Windows, I would then install.  And I would use custom installation so that it does not update the files in Vista but in fact move in Windows.old and install everything from scratch.
  Once Windows 7 is installed, I connect to the internet.  Windows registry, run Windows Update, until there are no updates available. Then, install an antivirus program and make sure it is up-to-date.  You can then install programs and update drivers\software.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Win XP Pro aiinstalle and work for a while, I updated the firmware CD, now, it's asking to reactivate windows.

  I've updated the firmware CD now it asks for a product key, I used this laptop for severla months, I get the message that the key has been used too many times and you need a new key.  I bought the laptop from a company farm selling off its old stock.

  Try what it sounded just like it has been reinstalled several times.
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.

  I hope this helps.