perspective grid tool - very good tutorials
I found the tool to be intuitive, to say the least perspective grid. Is there a good tutorials to learn how to do something useful with this tool, or is it typical of half-baked s which is not worth spending time on?
There is good learning material in the manual. Have you tried?
How to set perspective grids in Illustrator
Tags: Illustrator
Similar Questions
-
for ps cc perspective grid tool
for ps cc perspective grid tool
seek to use the perspective tool in ps - CP originated the program updated or is - what a external Plug and how to get it back.
THX
I think you mean the Vanishing Point filter found in the Menu filters.
If you mean Perspective Warp, you can find in the Edit menu.
-
I have illustrator cs5. I have front, side, rear, plans of vehicles. I need to create 3D illustrations. I did a trace of the line of these elevations and them projected on the perspective grid using the perspective tool. I got a distorted view of each side of the rack. What should I do?
Please see the establishment.
-
I am learning to master this tool and saw this video for Adobe TV. I use CS5 on its own (not as part of Design Premium). In this video, at 01:46, he describes going to SEE... Windows and a range of forms of window appears choice.
It is not available in my version. Is this fair to the Design Premium? Also, there are all sets of architectural to download to use with Illustaror?
I think I've seen this video before and we had the same question at a time. Windows is the label an opinion according to which the author of the video had already created and saved.
What it means.
Firsyt, he had attracted some art window somewhere on the canvas presumbably to the wide on the side and on the way in which the authors. so that while working on the current artboard may not see unless he uses the hand tool, browsers or the zoom tool to bring it to view!
But it's messy and inefficient, so there is a feature that allows you to access the canvas area and check this post, so you can back up to bring this region of the canvas in the view and as you can do it with other points of view you can name them so they are listed at the bottom of the view menu.
In this case, the author of the video name who discovers Windows. You don't have the display Windows since you have not created this view and you have not created the art of work for both windows. If they are not avaialabe because they do not exist anywhere in your document and on your computer.
BTW, if you are working on the detailed work requires it tell you to visit a small part of your document to a magnification of cxertain, so you can zoom in and save that as a point of view and you can always get return as you did before to the savingthe.
View > new view
-
not able to resize objects in the perspective grid
I placed a rectangel on the right side of the perspective grid. Then I tried to resize by clicking and dragging its corner with the perspective grid tool. The only thing that happened was the rectangle settles into the right perspective without resizing grid. Lynda video expects straignt. I have some parameter does not correctly set?
Thank you
Display > display the bounding box
-
The sound in Firefox is very slow and in other browsers is very good.
Dear Sir / Madam,.
I have problems with my sound in my box. It is very slow in firefox so that in other browsers is very good. The problem is firefox, but I don't know exactly how to fix it. This problem started one or two days ago, when I started my youtube and the sound was very slow. I tried with google chrome and the sound was ok. And I tested with Windows Player and it is ok as well. Only with firefox, I hear the sound very badly (slowly), I like firefox and I don't want to give up on it. So please help me with this problem.
Thank you very much
RamonaHello
If it is low volume in Firefox, you may need to increase the volume for Firefox under Windows. Please see that.
...............................................................................................................................
Useful links:
Beyond the tools > Options - about: config
Information page (Alt + T) tools > Page Info, right-click > view Page information
Files & Firefox profile folder
-
Problems of displacement of an object that is perpendicular to the Perspective grid
I followed this tutorial: id http://tv.adobe.com/watch/learn-illustrator-cs5/mapping-flat-artwork-to-the-perspective-gr / in which work is mapped to the perspective grid.
Towards the end of the video (07:00) a sign is mapped to the grid on the left then moved perpendicularly along the grid on the right... that holding down the tilde key.
When I hold down the tilde key and move the object (which is selected with the selection of point of view tool, with the selected correct grid) it is not mapped it perpendicular as in the video.
I deleted my illustrator preferences file (where all the parameters were originally this function does). Also, if I create a new object and press the tilde key and drag, I can create several instances, then the tilde at least key in this case is recognized.
It is the 5 key
-
Perspective selection tool will not scale
Then, I worked with Illustrator CS5 perspective all day without problem mode, when three hours, widget scaling perspective Selection tool disappear on me. He'd only move items now. Tried to dig into the menus to see if there were a few shortcut that I accidentally hit which disables the scaling (for a reason any), went up to reinstall the program, nothing works. Do not wait to hear a solution for this, but it makes it rather impossible to work in perspective and it is totally killing me, so it couldn't hurt to ask!
If there is now no bounding box, then it's view > hide/show the bounding box or Command Shift B Mac or PC Control Shift B
In the opposite case
I'll try to help you further, to ask the question in the language of the Illustrator and composed not of words thet yu will include only you need.
For example you speak of object scaled on the perspective grid? There is no widget scaling, but there is a widget for the selection of active plans.
What is the widget that you refer? If Yes, then you may need to turn off the visibility of the widget
If you talk about the grid and the widget, you might have to hit command > shift > I have on the Mac or the control > shift I have on the PC that would hide the grid and the widget hit the keys still once he'll bring back. Or view > Perspective grid > Perspective to show/hide grid.
Even after reinstalling it would probably not visible unless you trashed the settings folder after uninstalling.
Regarding the scaling is done with the perspective under the tool selection tool grille perspective.
-
Remove/reset the Perspective grid
Hi, people. I'm just now starting with CS5, Perspective grid is new to me. I wonder if there is any means to remove a grid already on the artboard, or if we want to do it again. Thank you very much in advance for any help!
Yes, there is. You can reset the default grid by going to the view menu > Perspective grid > two Point of view > [2 p-Normal mode]. You can hide the grid by pressing Shift-Ctrl-I, or by clicking the small 'x' in the widget Plane Switching (present in the top left of the document window when the grid is visible).
-
iCal 'Get Info' is grey for the blue calendar; The other color calendars are very good.
I deleted the file 'com.apple.iCal.plist '... No luck.
Please notify. Thank you, Roger
Presentation of the material:
Model name: iMac
Model ID: iMac9, 1
Processor name: Intel Core 2 Duo
Processor speed: of 2.66 GHz
Number of processors: 1
Total number of cores: 2
L2 Cache: 6 MB
Memory: 4 GB
Bus speed: 1.07 GHz
Boot ROM version: IM91.008D.B08
Version of the SCM (System): 1.44f0
If the problem is still there, try to start safe mode using your usual account. Disconnect all devices except those necessary for the test. Shut down the computer and then put it up after a 10 second wait. Immediately after hearing the startup chime, hold down the SHIFT key and continue to hold it until the gray Apple icon and a progress bar appear. Startup is considerably slower than normal. This will reset some caches, forces a check for directory and disables all start-up and connection, among other things. When you restart normally, the initial restart may be slower than normal. If the system is operating normally, there may be 3rd party applications that pose a problem. Try to delete/disable the third-party applications after a reboot using the UN-Installer. For each disable/remove, you need to restart if you do them all at once.
-
After updating my iPhone 6 (9.3.4) the WiFi signal becomes very low! I did everything, but the problem does not stop! I don't a not update my other devices & their very good WiFi signals. Please help me solve this terrible problem...
Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom. Maybe one of them will help you.
(1) restart you device.
(2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.
(3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.
(4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4
(5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.
(6) determine if other wireless network devices work well (other iOS devices, Mac, PC).
(7) try the device on another network, i.e., neighbors, the public coffee house, etc.
(8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).
https://support.Apple.com/en-us/HT201252
(9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.
-
Yesterday I installed a new SSD in my MacBook Pro 13 "unibody mid-2012 laptop computer.
After installation, I formatted the drive, install a new copy, El Capitan, then moved the rest of my Time Machine backup.
The computer works great, much more quickly than before. Everything works perfectly except...
After migration, iMovie now blocks whenever I try to open a project. Every time. All other applications are very good. I even opened the original library from my old drive, opens the library of my Time Machine backup and they all down when I double-click on the icon for ANY project!
The files are not corrupt because they have not changed. It doesn't matter which library I use, it crashes whenever I try to open a project.
So far, everything on the Mac works fine. Other applications of Apple, everything! Please someone help me solve this problem because I use iMovie on a regular basis and have SEVERAL projects open that I can't afford to remove.
Thank you!
Hello Jon Tompkins,
Thank you for using communities of Apple Support.
If I understand your message that iMovie crashes when you try to open a project. I know the importance of your projects are as I like to use iMovie as well. First of all, I would like to check to see that iMovie will appear in your shopping list in the Mac App Store. If so, delete the app and then reinstall it.
If this isn't the case, so do not delete the app. Instead, follow this link:
OS X El Capitan: If an application crashes or closes unexpectedly
Who also advises to test the problem in safe mode. This article includes the steps to start your MacBook Pro in safe mode:
Try safe mode if your Mac does not end commissioning
After having tested in safe mode, restart your Mac again and allow it to start up as usual. Then test the question again and see if it has not changed.
Best regards
-
HP Compaq 6000 SFF Elite: Very good Sound Card
This desktop PC HP Elite 6000 has a very bad sound system, and it must be replaced with a very good sound card. I have two good speakers powered by USB, I use, but I need a sound card. I have two slots... A 2.5 PCI "low profile card.
length 6.6 "power max. 25W and a PCI Expressx1 half height length 6.6" max power 10W.
So, which card its somone recommend here?
Dear customer,
Welcome and thanks for posting your question on the Forum from HP Support.Its recommended and its low profile card:
StarTech PCISOUND5CH2 card PCI one Surround sound 5.1 CH 8738 LX adapter + Low Profile
ASUS Xonar DG 5.1 its PCI card & headphone amp compact support Inc.
WELL, Creative Sound Blaster Audigy SB0570 PCI 24 bit Sound Card 7.1 LOW PROFILE
StarTech 4 Channel Low profile PCI Sound Adapter Card PM28738-2X2A PCISOUND4LP
Hope this helps, for other queries in response to the post and feel free to join us again.
* Click on the white button on the right to say thank you Thumbs Up *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
VSL85
Although I am an employee of HP, I speak for myself and not for HP -
P40-10 X Equuim: Reception of WLan is very good, but extremely slow
Hello
I just bought an Equuim P40 - when I connect to wireless broadband, the reception is very good but is extremely slow when it comes to load the pages of the internet - any suggestions on how to remedy this?
Thank you!Hello
It's not easy to say why the notebook loads page s Web slowly.
For the most part, Web sites load slowly due to the amount of data.
If pages use flash animations or there is a big traffic on Web sites, the service could be overworked and loads of slower sites.If the antivirus software is activated and control each transfer of data the sites could also loads slowly.
As you can see, several factors can affect the loading of the page!
-
Anatel Sony wireless mouse connects erratically with cursor. The battery life is very good. The cursor problem also seems to be making the top and down arrows on my wired keyboard. When the cursor is engaged the arrows will work. When the cursor does not connect correctly the arrows do not work. The surace the mouse is on doesn't seem to be a factor.
Maybe you are looking for
-
Need drivers for Satellite 2430 703
After poor performance and other problems with my laptop, I thought to update some drivers. But where are they? On the support pages Toshiba Satellite 2430 703 is not found (in 'Archives' or any other category). Apparently, it never existed. I wonder
-
Other data on the same chart Labview DAQ +.
Try to do something fairly simple in labview. We read up to 16 analog inputs continuous (in a loop), the merger signals and display on a single diagram. Now, I have a few other data from another (non DAQ) instrument playing in another loop much more
-
I bought a HP laptop in December 2007. It came with Windows Vista Home Premium 32 bit OS pre-installed on it. It has been working well so far, when I need to format and install a fresh copy of the product. But the Microsoft sticker with the original
-
I have connected my DVR to my pc but I can't use it in pc
* O.T. > network connection problem Dear father I have connected my DVR to my pc but I can't use it in pc Windows is unable to diagnose it. Whould help me please
-
Can't drag my music mp3 files in im wmp12 burn list
Hi guys, wonder if anyone can help me, im using wmp12, it will play my mp3 audio without any problem, when I try and drag the files in the burn list, it doesn't let me do, when I drag a file to the list of burn it does not add to the list, can anyone