PEUT

Similar Questions

• Hello, I accidentally unistall my drivers cd/dvd rom. Peut help click my cd/dvd rom drivers.

  Hello, I accidentally unistall my drivers cd/dvd rom. Peut help click my cd/dvd rom drivers.

  You should not have to open your computer.

  Click Start, type: Device Manager

  Press enter on your keyboard

  Click Find hardware changes on the toolbar

  Your optical drives should be redétectés. Restart your computer and see if it shows up.

  If this does not work, try the following suggestions by Rob Brown MS - MVP

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

• If I convert PDF to Word in Hebrew that he reverse, peut ypu help me? If I use the pdf export program it will turn out OK?

  If I convert PDF to Word in Hebrew that he reverse, peut ypu help me? If I use the pdf export program it will turn out OK?

  Known limit of Acrobat export feature. It cannot properly manage the alphabets from right to the left like Hebrew, Arabic and Farsi.

  No date for the resolution of this limitation.

  -Dov

• First peut Elememts 3.0 for Windows XP running on Windows 7 or 8? If this is not the case, what are my options?

  First peut Elememts 3.0 for Windows XP (which I have again in the box) running on Windows 7 or 8? If this is not the case, what are my options?

  Nevermind, I figured it with the help of 1 855 556 6777.

  The answer is YES it will work.

• Cannot migrate VM on iSCSI SAN. Failure at the helm of the 10%. Peut vmping to all addresses

  Hello everyone

  Impossible to migrate virtual machines on iSCSI SAN. Failure at the helm of the 10%. Peut vmping to all addresses

  I recently installed a new configuration of the VM and I feel the above. My configuration is:

  2 HP DL380 with 1CPU 16 GB of ram and 500 GB shared space on iSCSI SAN.

  Installation of the network as follows:

  each host has the 6 network ports that is load balanced and fault tolrated in 3 VMSwitches. VMSwitch0 goes to 2 ports to shared resources on a 4510th cisco. On this switch, I use VLAN tagging to different servers that perform different functions. It works fine.ie. VLAN 5 is for the management vlan 31 is for secure vlan servers 37 is forinternal Web servers.

  VMSwitch1 is a vmkwenelport for the connection of iSCSI SAN. It is set on vlan 200 on the switch, so does tagging vlan put it. We have separated our san network ourusual networks.

  vmswitch2 is used for backup purposes and is used in a similar manner as vmswitch0. the ports of trunkied and backup services is vlan tag to go to the correct servers.

  I am able to ping betwneen the VLANS allowed. I can also vmkping to all the ip addresses of the two hosts san.

  What I can't do is to migrate direct customers between the hosts. He is still unable to 10% with the following error:

  Migrate the computer virtual iws3xx - pop1.mns.tlg.private a general error has occurred: the VMotion failed because the ESX hosts were not able to connect to the network for VMotion.  Please check your physical network configuration and settings network VMotion.

  I looked in the newspaper of vmkkernel and I get the following text:

  9 Oct 15:05:38 esxn1-pop1 vmkernel: & lt; 7 & gt; fn_scroll_back not implemented & lt; 7 & gt; fn_scroll_back not implemented & lt; 7 & gt; fn_scroll_back not implemented & lt; 7 & gt; fn_scroll_back no implemented7:05:04:55.236 cpu2:6534) migrate: vm 6535:2094: info setting VMOTION: ts = 1255097135856641 Source, src = ip & lt; 172.31.207.21 & gt;

  9 Oct 15:05:38 esxn1-pop1 vmkernel: ip dest = & lt; 172.31.207.22 & gt; Dest wid = 6447 using SHARED swap

  9 Oct 15:05:38 esxn1-pop1 vmkernel: 7:05:04:55.236 cpu2:6534) Tcpip_Vmk: 1107: refining worldwide 6899 172.31.207.21, success

  (9 Oct 15:05:38 esxn1-pop1 vmkernel: 7:05:04:55.236 cpu2:6534) VMotion: 1807:1255097135856641 S: Set ip address ' 172.31.207.21 ' worldlet affinity to send the world ID 6899

  9 Oct 15:06:53 esxn1-pop1 vmkernel: 7:05:06:10.234 cpu3:6899) WARNING: MigrateNet: 668: 1255097135856641 S: Connect to & lt; 172.31.207.22 & gt; : 8000 failed: timeout

  9 Oct 15:06:53 esxn1-pop1 vmkernel: 7:05:06:10.234 cpu3:6899) WARNING: migrate: 295: 1255097135856641 S: Failed: host ESX The failed to connect on the network for VMotion (0xbad010d) @0 x 0

  9 Oct 15:06:53 esxn1-pop1 vmkernel: 7:05:06:10.245 cpu1:6538) WARNING: migrate: 3267: 1255097135856641 s: Migration, considered a failure by the VMX.  It is probably a timeout, but check the VMX log for the actual error.

  The journal of vmx says:

  16:07:38.856 Oct 09: vmx | http://Msg.checkpoint.migration.nodata the VMotion failed because the destination ESX host has not received all of the data of the source on the network for VMotion ESX host.  Please check your network VMotion settings and physical network configuration and ensure that they are correct.

  Can anyone help with this please

  No iSCSI traffic will work only if vmKernal and vmConsole are on the same vswitch. Maybe on the same vLAN according to how your VLAN.

• Please can someone advise what I need to do to get rid of a pop-up window? The window says "(ce Mac ne peut pas connecter à iCloud en raison de problème avec, j'insère mon adresse d'e-mail ici)." I entered my iCloud password several times and it keeps pop

  This window continues to appear even if I get back my password to iCloud as requested.

  < image edited by host to remove personal information >

  Bed of the window pop up. "The Mac cannot connect to iCloud due to a problem (insert my iCloud email address). ICloud Open preferences for this problem".

  I did it many times and it keeps popping up. I have restarted my computer, deleted the history etc, but it always appears. Any suggestions please

• iPad Pro: LTE connection lose (AT &amp; T).  Peut - iOS9.3 - Related

  I noticed, over the last week, many cases where my iPad Pro loses its connection (AT & T).  He goes to 'No Service'.

  Ignition and extinction of airplane Mode doesn't seem to help, or not given cellular switching back then didn't seem to help.  So far, only restart it seems to solve the problem.

  No, I have not tried a hard reboot (two buttons) yet.  What the heck, I'll probably try that next...

  I don't know if it is related to iOS9.3, but it seems to be pretty much in this time...

  Anyone else see anything like that?

  Try a reboot of the Force. Press and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  If this does not help, tap settings > general > reset > reset network settings

  You will need to enter your Wi - Fi password.

• Peut PCI 6534 sample of both 32-bit output

  Hi, sorry only if she's not interested.

  I was with C++ and NOR-DAQmx to a generation of model externally triggered on PCI-6534. By using the following code, I was able to generate an array of 32-bit both samples:

  uInt32 DataArray [Nsamples];

  DAQmxErrChk (DAQmxWriteDigitalU32 (taskHandle, Nsamples, FALSE, Timeout, DAQmx_Val_GroupByScanNumber, DataArray, & written, NULL));

  When I switched to NOR-DAQ, it seems that I can group all the data with space = 4, but following each function, the data type of 'piBuffer' virtue 'i16"(16-bit integer). What I have to recalculate all my data and divided into two groups?

  DIG_Block_Out (iDevice, Group, piBuffer, ulCount);

  If this is done, it will be able to output defined smaple of 32 bits in each clock cycle or two cycles needed?

  Thank you.

  Kxz,

  Thanks for posting on the Forums of NOR. In my view, there are a few suggestions for this, you'll have to forgive me a bit that we do not get a lot of questions on the DAQ hardware traditional much more.  I think you have a few options in your case:

  (1) the DIG_Out_Prt function which can be called four times (once for each port) with a pattern you want or,

  (2) you can call the DIG_Block_Out function, now the entrance of the buffer will be an entry with two tables, each of the 16 elements. You will need the size of your group as 2 (2 groups of 2 ports) or 4 (4 groups of 1 port), DIG_Block_Out writes data to the low 8 bits of the buffer [0] in the port (port 0 or 2) and the high 8 bits of buffer data [0] to the top port (port 1 or port 3) lower. If the group size is 4, DIG_Block_Out written data buffer[0] to ports 0 and 1 and the bufferdata [1] in lanes 2 and 3.

  Overall, we strongly suggest to use DAQmx for your programming, but we have good documentation on all C functions in aid OR-DAQ traditional (old). You can normally find this file under start > programs > National Instruments > NOR-DAQ > traditional NOR-DAQ function reference help. This includes all the documentation for our text-based features. Thank you!

• Peut; t hear his Skype call

  I have a problem when I'm wanting to make a Skype call. The other person can't hear me. I tried all the malfunctions, but yet the person can hear me but I can hear them.

  do a sound test of Skype to determine if your microphone is working.

  http://www.Skype.com/go/help

  If your friend cannot hear you maybe its their end does not.

• Peut-32-bit Windows XP Home Edition on a 64-bit computer?

  32-bit Windows XP Home edition with service pack 3 can be installed on a 64 bit system?

  Hello

  Yes, you can install Windows XP 32 bit edition on 64-bit processor computer.

  32-bit and 64-bit Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Note: Above article also applies to Windows XP operating systems.

• C:\cabs\win95-98-peut it be deleted?

  Hello

  I am running XP Pro Version 5.1 (Build 2600.xpsp_sp3_gdr.101209 - 1647: Service Pack 3) and am looking to get rid of unnecessary files. C:\cabs\win95-98 can be deleted?

  Thanks in advance,

  Bill B.

  Actually, I put the folder to an external drive (cut & paste), restarted, and everything works. 24.8 MB of useless files.

• Split HP 13 x 2 peut-she take a wired Internet connection?

  This laptop can maintain a wired connection?

  router--> cable ethernet--> Tek Republic TUN - 300--> portable USB 3.0 port

  It seems that this laptop has no LAN or even support a wired connection.

  Can someone please?

  Thank you

  AG276 wrote:

  Sorry, you mean Tek drivers, HP nothing?

  Hello

  HP does not produce the product.

  Kind regards.

• Peut downgrade firmware from 3.18.15 to 3.18.14

  Hello

  My default NMH405 fw 3.18.14 and everything went smoothly until I passes to 3.18.15 which caused not able to connect with access to remote. I always speedy remote site is out of service or device in offline mode.

  Anyone know how to downgrade the firmware?

  Try the reset steps Mared1784 post here .

  See you soon.

• peut vista premium on the same network home with an o/s of windows7 with a printer between pc Desktop 4, s

  I have 4 pc desktop 1 hp photosmart printer 3 PCs are windows vista premium 1pc is windows7 premium I can't seem to configure them together on the same network support;

  Hello

  Read these

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  networking of computers running different versions of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  setting up a network home

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Vista File and Printer Sharing.

• Peut a Dell 17R-N7010, receive the upgrade of ram and a graphics card?

  Hello

  I have recently become interested in being a pc player, but my computer is just not powerful to play games. Written IM see if someone could tell me if a Dell 17R-N7010, receive a graphics card and put upgraded ram and if so if you could tell me what it is and where to buy.

  Thank you

  RAM can be upgraded to max 8G (2 X 4).
  Video chip cannot be upgraded.