Similar Questions

• Impossible to restart my Mac Book Pro, blocked by the old printer icon

  I can't reboot my mac to complete book download updates because it is blocked by the former icon of the printer that I can not delete - have deleted the program, but the icon remains open but out of order on the toolbar

  can anyone help

  Jules

  Click on force quit command in the Apple menu (or press Command + Option + ESC) to select the program has stopped responding and get him to leave. If you cannot switch to other programs and you can not choose the order close in the Apple menu, force a shutdown by pressing the power button; do not let go until it powers off the machine.

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• PSE13 Validation impossible serial No.; recognition binding not blocking on the Internet; launch PSE13: result page white; However N ° license registered in profile; give your opinion? not of I don't know! What do I do? Thank you

  PSE13 Validation impossible serial No.;

  recognition binding not blocking on the Internet;

  If/reinstal: Ditto

  launch PSE13: result page white;

  However N ° license registered in profile; give your opinion? not of I don't know!

  What do I do? Thank you

  Hi Jpl81406915,

  Please visit:https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  I hope this helps.

  Concerning

  Megha Rawat

• Just updated to ios 9 and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes as I have to disable 'find my iPod toch' and cannot do the iPod is blocked with the message to update.  Will not work force a stop down.

  Just updated to ios 9.2 (from 8 something) and my ipod touch is stuck at 'update of the iCloud parameters.  I can not restore from iTunes because I have to disable "Find my iPod touch" first of all, and I can't do as the iPod is blocked with the message to update.  Forcing a stop down does not work that for some reason, I am unable to turn off my iPod touch manually.  I tried to turn off my wifi to see if that stops the iPod touch, but he always keeps on the message to iCloud.  Do I just wait until the battery sinks so that it forces a reboot?

  Place your iOS device into Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.

  iOS: I forgot the password or disabled device

  If the recovery mode does not work, try the DFU mode.

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  To learn how to restore:

  iTunes: restore iOS software

  To restore backup see:

  Restore your device from an iCloud or iTunes backup - Apple Support

  If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

  You can re-download most of iTunes purchases by:

  Download after purchase from the App Store and iTunes Store iBookstore

  If no problem what happens or doesn't happen, and when in the instructions? When you get the iPod into recovery successfully mode and connect to iTunes on the computer should say that it found an iPod in recovery mode.

• Can't open the website, blocker of the site blocks

  Original title: popup blockers

  I registered for an online course and a pop-up - blocker won't let me precede beyond the selection.  I named this site that allowed for the pop ups and even tried to turn pop up blocker off the coast. Help!

  Hello

  1. did you of recent changes on your system prior to this problem?
  2. do you receive any error messages?

  Method 1: I suggest you try the procedure described in the below mentioned link and check if it helps.

  How do I configure the blocker pop up on a computer that is running Windows XP Service Pack 2
  http://support.Microsoft.com/kb/843016

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
  How to back up and restore the registry in Windows

  Method 2: If the problem persists, you try the procedure described in the link mentioned below.

  Pop-up windows appear with pop-up Blocker is turned on in Windows XP Service Pack 2
  http://support.Microsoft.com/?kbid=843015

  Hope this information is useful.

• Error "ArcSoft Connect Daemon has stopped working. A problem caused the blocking of the program works correctly. » »

  The original title - the following message mean?

  I get the following message from Microsoft Windows every time I turn on my computer: ArcSoft Connect Daemon has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.      'Close program' is in a box for me to enter.  What does that mean?  What I'll do.  I get this message for about a week now.

  Hello

  Read the solution proposed by Don Varnau at this link

  http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/ArcSoft-connect-daemon-error-message/c4a5511e-65f9-4B9C-9a43-d9f631c32b73

  Hello

  Quick and dirty solution...
  Start > run > (type) msconfig > Startup tab > uncheck the ArcSoft program > restart.

  Plan b... Watch the programs at http://www.arcsoft.com/en-us/index.asp

  Check Add or remove programs for any of these programs and uninstall the program or turn off
  automatic updates or to automatically connect or what similar feature you find.

  Hope this helps,
  Don
  

  __________________________________

  See you soon.

• Final Fantasy XIV has stopped working a problem caused the blocking of the program works correctly. on VIsta 64 bit...

  Final Fantasy XIV has stopped working a problem caused the blocking of the program works correctly.

  Hello

  1. If it works well before?

  2 have you made any changes to the computer before the show?

  Method 1: So that the game takes place effectively, your computer should meet all the minimum hardware and software requirements.

  Make sure that your computer can run the game.

   

  Method 2: Try to reduce (or turn off) video hardware acceleration by following these steps.

  Instruction to change hardware acceleration:

  a. open the resolution of the screen by clicking on the button start picture of the Start button, click Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click Advanced settings, click the Troubleshooting tab and then click on change settings.

  Note that some video card drivers do not allow allows you to change the settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.

  Note: If you reduce the hardware acceleration resolves the issue, you may need to update your video card drivers.

  Method 3:  Updated graphics card drivers and see that helps.

  Reference:

  Updated a hardware driver that is not working properly:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: You can also try to run the game in boot.

  Reference:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

• Boots only to the Startup Repair. Hardware diagnostics found bad blocks on the hard disk. is it possible to move data outside of Windows?

  Original title: Hi, I have a Dell Inspiron 1545 laptop.  Recently, he stopped working and would go only to the screen that asks if you want to run the Startup Repair tool.

  Of course whenever I launch it, it goes back to this screen.  Check the diagnostics through the F12 boot, I had three error codes: 0F00:1344, 0244 and 1 A 44.  These were all on the same three blocks.  The message was impossible to read, replace the drive.  I'm really the most responsible for recover my photos, documents, etc. and have an external hard drive.  Is it possible to do so, even if Windows (Vista in this case) will not start?

  Hello

  You can try these methods

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

  If this does not work, you may need to contact the data recovery specialists

• Orb is blocked at the start of the system on my Vista Ultimate SP2.

  Original title: Orb

  Hello

  Orb is blocked at the start of the system on my Vista Ultimate SP2, even if the box is checked in the setup of the system. What could be the reason? And there at - it a danger by unlocking it? If this is not the case, how can I put it so that it hangs every time you start?

  Thank you

  Hello
   
  1. When you say its blocked, that you get any message or it does not appear at startup?
   
  2. don't you perform a normal startup or selective startup?
   
  I suggest that you follow the steps below and check if the problem persists.
   
  Step 1:
   
  This can be caused by your security software, I would temporarily disable all security software and check if the ORB is blocked.
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
   
  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Step 2:
   
  If it works, then give exception in Firewall setting for the program.
  Orb is a third-party application, and if trust you him, you can add as an exception.
  WARNING OF THIRD PARTY SOFTWARE
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
  
  Let us know what happens in safe mode.
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Reference Dell 375 Bluetooth no longer works after update Windows 8, R296919, blocked by the Compatibility Assistant programs - how to fix

  Hardware: Dell laptop with adapter Bluetooth 375 Dell running Windows 8

  Problem: after Microsoft Windows 8 update, all Bluetooth devices stopped working.  Moreover, they could is more to be discovered to pair them up.  Device Manager showed all works very well.

  Failure of attempts to repair:
  -Uninstall all components of Bluetooth in the Device Manager and analysis of the material changes.
  -Uninstall Dell 375 in programs & features (WIDCOMM Bluetooth Software) in order to reinstall (R296919).  The installation was quickly blocked by the program compatibility Wizard.
  -With the Dell software uninstalled, I thought that perhaps that it was no longer necessary, and so Microsoft software would work.  Yet once, I uninstalled all Bluetooth components in the Device Manager and analysis of the material changes.  Still could not pair.
  -Check in Bluetooth services and services were running.

  What worked:
  -Run GPEdit and go to the compatibility of the components/Application Computer Configuration / Administrative Templates/Windows /.
  -Enable the following:
  Remove Program Compatibility Property Page
  Turn off Application compatibility engine
  Disable the program compatibility Wizard
  -Run services.msc and stop the process of Bluetooth
  -Extract the R296919 in a directory
  - on R296919.exe and select run as administrator
  -For me, the installation failed the first time.  Then I repeated it, and it was installed fine, but required reset, which I did.
  -At this point, I was able to pair Bluetooth devices again.
  -Open Device Manager and go to the Bluetooth Module Bluetooth/Dell Wireless 375.  and select Properties.  Click the power management tab, and uncheck "Allow the computer to turn off the device to save power" and press OK.  If you do not perform this step, you will have all kinds of problems with Bluetooth devices, including keyboards and mice.
  -Reverse changes in GPEdit to not configured.
  -Reboot

  How to avoid the problem:
  Microsoft has an updated driver that States it is for the adapter Bluetooth of Dell 375.  on the update and select Hide update.  Microsoft has had quite a few black Tuesday lately, and this update is just another example.

  The above post started as a question.  While typing what has not worked, I developed the answer.

• Math (s) program has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available,

  Mathematica, matlab and Powersim all receive the error at startup «empty program stopped working. » A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. " The programs worked in May when I left for vacation and now they do not work. I tried to uninstall/re-installing all programs - it did not work. Programs opened by operating in safe mode with network. I can't find out whether the problem is caused by a windows update. I can't do a restore of the system to an earlier period of time because the only active restorations are after programs stopped working. Any advice is greatly appreciated!

  Hello

  It seems that the module defective sdb4mdu.dll is the cause of the crash. According to my research, sdb4mdu.dll is a driver printer interface module - which means that it is related to your printer drivers. Assuming that this module belongs to your default printer (which it might not, it is hard to say), disable it would risk instability. I recommend you to run the System File Checker. See this article: http://support.microsoft.com/kb/929833/en-us

  Don't forget to restart your computer after you run it.

  If this does not work, try to uninstall and reinstall the drivers for your printer.

  If it does not either, we can try to turn off the TPM. (first of all, creating a restore point in case something goes wrong)

  I hope this helps!

  Mithrandir

• "a problem caused the blocking of the program works correctly.

  I had Crysis 3, and every time I try to open a box comes up saying ' a problem caused the blocking of the program works correctly "and if there is no way to disable this would be great.

  I don't know the name of the program that keeps pulling to the top of this box. I know that if I can disable my crysis 3 will work very well because I have to let go does not for a while.

  Reach

  Monitor control Panel\All Control Panel Items\Action Center\Reliability

  Click on the date and check reliability below details

  Alternatively, you can run your game in clean boot mode. Need to restart the system after you turn off third and start-up services

  http://support.Microsoft.com/kb/929135/en-us

  Allow five or ten start-up services both to locate the faulty app requires a few reboots and a lot of patience ;-)

• Stuck on the screen "Please wait" or "Configuring windows. Do not turn off your computer.

  I'm under 64-bit Windows 8

  Apparently, I scanned my system with a complete analysis of the system (AVAST) and my computer left thinking that it would take several hours. When I came back, my computer automatically shut down because it was left idle for about 4 hours. I don't know if the scan is finished. When I try to start, the screen becomes screen stuck on "Please wait" or "windows setup. Do not turn off your computer.

  I already tried to go on the System Recovery Options screen, then will solve the problems, then Advanced Options, but I tried everything what it and the problem persists even when I tried to start in safe mode. I tried to go to the command prompt, and then type sfc / scannow, but he says he cannot parse now. I also tried chkdsk / R, but it said the same thing. I don't know how to run cmd as administrator from the System Recovery Options.

  So now I tried to use system restore, but I'm stuck on the logo of windows for about 1 and a half hour. I don't know if I have to wait for it or it is already blocked. In other forums I've read, they were using only the Group of drive 'C:' connected with system restore. Should I do this?

  I think to delete AVAST or turn it off somehow.

  Please help me.

  Problem solved

  I would like to share how I solved the problem. I was able to start using the windows 8 cd and in the window that asks you the language of the windows 8 needs to be installed, you can see below "computer repair".

  After clicking on it, it automatically prompts me for advanced boot parameters. First I tried the auto repair, but it says the same thing, '.. '. can't fix right now... »
  So I tried the option "pc refresh. I waited a few minutes to cool to do and after the process, it is more hung please wait screen when starting.

  Once connected, I installed programs have been removed. In the local disk files, there is a new "windows.old folder ' showing all programs that I have the old system. Re-install program is easy and the best thing is that I have my computer back.

  My deep gratitude to those who helped me. Thank you!

• Impossible to reach on the Adobe servers, please check the firewall settings and try again

  Impossible to reach on the Adobe servers, please check the firewall settings and try again

  Where download photoshop cc trail is said ^^

  I tried to add adobe through firewall

  I tried activation adobe inbound rules

  I tried to restart my pc

  Nothing works please help

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html