Phone A75 which port replicator will work?

Similar Questions

• dv7t-6100cto: which improved processors will work in this notebook

  I'm getting a new computer in the near future or upgrade the one I have. I don't know which processor upgrade path has this computer. Here are the specs: Chipset HM65, taken G2 (rPGA988B), 165 m, I7-2720QM card mother HP.

  On the Intel websitethere are some of the sandy Bridge and some processors Ivy Bridge that will work with this chipset, but I don't know if HP has imposed a stricter paramiters on what will work the cpu on this forum. Any direction you know where I can get pertinant information.

  I appreciate this info. I am influenced to go ahead and make a new version of a desktop when the need arises, because they have more potential for a faster processor. I can wait the Skylake finally surface. have not found much info on it yet, just a lot of speculation so far, it seems. Thank you for your help.

• How can I determine which usb readers will work on my G4?

  I have a powerpc G4 10.4.11 running. I have 1 flash drive that works, and many who are not recognized. I would like to buy a new drive for more capacity (probably old) to use on this computer, but I cannot figure out what to look for to make sure it will work. What is the usb version, I need to look? If so, what works on my machine?

  How are the disks that are not formatted?

• which antivirus software will work with a new processor 64-bit with 32 bit xp pro?

  Insalled new computer with an older version of xp pro 32 bit and a 64-bit processor.  Need a compatible Antivirus software.  Avast and AVG locked system does not load.

  Any of them, the operating system is what determines if you use a 64-bit anti-virus program not the processor. Lock-up questions do not sound like they are a related program.

  Did you just install a new processor? All programs are locked up? Uninstall Avast and reinstall, see if that helps.

  Download MSE and install it.

• Tecra A11 & Express Port Replicator II - USB problems

  Hello

  I'm having a problem with a port replicator that I simple couldn't have resolved for months. I'll try to explain this as best I can.

  We have a Tecra A11, which seems to work fine running on Windows 7 Professional. When the Tecra A11 is pluged in an Express Port Replicator 2, not USB ports in the port replicator's work at all. Very good cell phone fees and the LAN switches on the replicator fine, but the USB ports simly does not work under any circumstances. It would also be interesting to note that the green light next to the "eject" button lights never really.

  I downloaded and installed the latest series driver for Windows 7 from the Toshiba support page which has no effect. We had 2 replacements for Toshiba because they also agreed that the previous, we had were not woring correctly, but this obviously was not the case because we still have the same problem with our 3rd unit. The Tecra A11 was sent back to Toshiba with case notes clearly describing the question, and he was sent to us "no fault found".

  Unfortunately, we don't have any other laptops to test on the port replicator. but I'm seriously suspect that the problem lies in the laptop, rather than the port replicator. For any idea or suggestion will be greatly appreciated.

  Kind regards

  Steve.

  Hello

  According to your message, you are not sure if the problem is related to the defective laptop Tecra or express port replicator.
  Hmm theoretically the problem might be related to defective express port replicator or Tecra.

  If found some information on the USB ports and the repliators port:

  + Make sure that the element of Legacy USB in the BIOS emulation is set to "Enabled". This feature only works for the keyboard and mouse. Also note that the keyboard and mouse must be connected before you start the computer. A USB mouse, keyboard or the floppy drive connected to the Port Replicator via any other connection that a hub of the first level, will not work until the operating system has started. +

  I also recommend to check the version of the BIOS; If the most recent BIOS is available, then you need to update this

• Tecra A10 - poor display through the port replicator

  I have an error with one of my clients, they have 3 x Tecra A10 is bought in the last three months, the last time being last week.

  I get a very poor screen through the port replicator, lines running through the screen almost like the lines of scanning, or RF interference. It happens on all three laptop configurations.
  We have new Phillips 19 "wide and 22" widescreen, I also tried a HP 19 "wide where else in the company. also having the same problem. These monitors are working 100% if hooked up to a computer or DIRECTLY into the laptop A10, as soon as you plug them into the cradle we get lines through the screen.

  I'm learning to communicate with the provider in order to replace it, because I have three already do the same thing, I'm pretty sure that I will receive a fourth with the same error.

  Someone else has the same problem?
  According to me, this issue has been raised on another forum, but was not answered. Does anyone have a solution?

  Please can you tell us which port replicator you use and which port replicator port?
  BTW: you are an authorized service provider?

• III - issue of serial port Advanced Port Replicator.

  Hi, I have a few apps that do not work with usb to serial adapters. I need to know if the serial port on an advanced port replicator will not work unless the serial port was "integrated" to the computer, as they used to be in older laptops.

  Are the drivers required to make ports to work within windows?

  I have a Tecra M2.

  According to the specification for Tecra M2 Toshiba PA3314E - 1PRP Port Replicator III Advanced is certainly compatible and I guess it should work. Unfortunately, my printer has USB port and I can't test it.

• A US iPhone will work in Australia, guaranteed?

  I amtravelling in the USA and the need to buy a new phone. A US iPhone will work in Australia and will be honored in Australia for repairs warranty it if necessary?

  It can work in Australia, but not all bands could be supported. Guaranteed for a phone US is valid in the United States. Band support can also count on the device you purchase.

• Portege M400: Display appears on the side to the Port Replicator

  Hi all

  M400 laptop when starting at the port replicator will display the screen on the side. I must then, open the laptop screen and set the display in normal mode. When I'm correct display turn the laptop off and back on the display appears again on the side... Turning on a laptop without port replicator, portable computers the display is correct. What is going on. How to set the default display when in normal port replicator?

  Thank you

  These sound like the laptop would turn to Tablet mode after connection to the raplicator port.
  I think it has a bad setting in the utility of rotation.
  You must enter this utility and check the PC mode and the Tablet PC settings.
  I think that the parameters must be defined on primary landscape

  In addition, I would recommend checking the Toshiba mobile extension tool that is placed in the control panel.
  There is a tab to display change. Here you can activate the service of display change

• USB 2.0 Port Replicator II PX1173E-1PRP-Vista drviver

  Hello
  Sorry, I found that this problem has been resolved in 22.6.07:

  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=88624#88624

  but this time, I have a similar problem and I have not found drivers cited in "driver page. I have the Toshiba U400-14Z notebook, but this port replicator only work with the XP system. Thank you.

  Did you follow Chad s instruction how to find?
  I found there Vista Driver Package 4.94.071106 version

• What Flash Speedlite will work with my Canon Rebel EOS T3 1100 D?

  Hi, I'm new to the era of digital and older than 55 years.  My husband bought me a Canon Rebel EOS T3 1100 D in July.   (I fought the "technological" upgrade until my old film camera Canon quit on me).  I took pictures since 1966, so I'm not new to photograph, just for our technological advances.

  I would be very grateful if someone could help me with which Flash Speedlite will work with my Canon Rebel T3 D 1100 camera specific.

  I thank very you much for your time.

  I just got my 430EX II that I bought for use with my Rebel T2i. The main reason I bought the Canon product was... using Canon products, I have never had a failure or a bad experience of 60 years. I use the LL 430EX for a few days and I'm very happy with the results. Much, much better than the built-in flash. It is on sale now with free shipping of Fed X. It is hard to beat.

  Good luck with your new camera.

  Joe

• OEM license key will work with sales facility in retail Windows

  Originally titled: My driver's license - which is preinstalled - will work on a new installation.

  It is a long story.  I have a Sony VPCEB1S0E.  I got a copy of Windows 7 Home Premium 64 - bit preloaded on it.

  Backstory:

  My laptop crashed about 1 year ago.  If a friend of my uncle has reinstalled a fresh copy of Windows 7 Ultimate 64-bit.  Lately, I realized that it is a Windows patched copy.  It does not say it is authentic, but I think that it is loaded with a magazine or something.  I used the command slui.exe 3 and entered my old key for my Home Premium edition.  He said that the key that I entered belonged to another edition of Windows.

  Present:

  So I tried to download an iso. using the new recovery software Page.  However, when I entered my old product key, it displays an error saying:

  Unsupported product

  The product key you have entered seems to be the software that was preinstalled on a device.  Contact the manufacturer of the device for soft recovery options.

  I managed to download an iso of Home Premium. file from a trusted source.

  Main question:

  If I reinstall a new copy of Windows Home Premium, my existing license key will work during installation?

  Yes, the product key will work because it's the right 'Home Premium' edition.

  To learn more:

  http://techingiteasy.WordPress.com/2012/04/13/how-to-activate-Windows-7-OEM-license-using-a-retail-disc/

• Port Replicator to the United Kingdom will work with US Portege R830?

  A Port Replicator to speed in United Kingdom Hi (PA3838D-1PRP) will be compatible with the laptop Portege R830 American version?

  I guess you're meaning that this port replicator
  http://www.Toshiba.co.UK/discontinued-products/pa3838d-1PRP/

  It is mentioned that this Port Replicator is compatible with Portege R700 and Portege R830 series.
  European, along with Americans and Australians are very similar to each other so the port replicator, must be compatible.

  But I guess you need an AC wall adapter for plugging the European system in the United States

• Satellite R15-829: keyboard & mouse will not work on advanced port replicator 3

  Hello

  I have the following problem:
  I have a portable Satellite R15 829 Tablet. I went and bought a Toshiba Advanced port replicator (PA3474U-1PRP) 3 second hand. When I plug in a keyboard and a mouse for it, they won't work. However, when I have the laptop dock and power, of the function on the external keyboard blink.

  I had a load of a keyboard and a USB mouse, and they work, so it would be a kind of compatiability issue?

  So I know that there are be able to enter them. Could be a driver problem type? Or something else? If anyone has any suggestions, I would be very grateful.

  Thank you.

  Post edited by: mur_cott

  Hello

  This device is not known to me but please check if Toshiba Mobile Extensions 3 installed on your laptop. See also the version
  Check if the latest version of the BIOS is also installed on your laptop.
  If this isn't the case, then try updating the BIOS.

• Tecra M7 & express II PA3680E-1PRP port replicator do not work together

  Hello

  I ve a Toshiba tecra M7 in recent years and have just bought a brand new sealed express duplicator II model PA3680E (docking station) but unfortunately it does not work and a new replacement, sent by the provider does not work.

  What's happening:
  With docking station connected to the start; nothing happens, and the Green dock light stays off.

  Windows when I put the tecra m7 on the dock it connects and disconnects immediately then will not reconnect. The power of power port, the lan port and the power switch work on the dock, but I understand that these are just happening through connections. The Green led power lights up also for less than a second.

  For example, when I do a connection hot, windows is connection chime followed immediately by a chime of disconnection and restores, also all USB connected devices flick-on and immediately off the coast.

  I ve tried under the original Toshiba windows XP install (with the latest Toshiba) and a fresh install of windows 7 (fully updated with all the update from Toshiba). BIOS is the latest available 3.50 (also tried 1.70 & 3.20 bios). tried bios USB legacy on and outside.

  Can someone please help

  Hello

  > With docking station, connected to the start; nothing happens, and the Green dock light stays off.

  The green light that is placed near the eject button it lights up green during normal operation and must be extinguished if the phone has been disconnected.

  If the led does not light green, so I guess that the laptop is not connected correctly.

  If you connect the laptop for the first time to the port replicator, a message should appear stating the device connected to the port replicator are ready to use.

  In my opinion, there could be a problem with the pins or connectors, but the question is what may be touched connector: on the side of Tecra or port replicator

  However, I think that go you to your dealer and need to test another.