Phone goes into a deep sleep.

Similar Questions

• Qosmio X 500-116 - goes into a deep sleep

  I had the computer above since February 2010, and over the years, I had a lot of problems. I was brought not to use it as whenever he gives me problems.

  Today, I thought I would try to see if I can find a solution. I turned on after charging the battery for about an hour and it started in about a minute, not bad. I've updated my Norton Internet Security, it's over and I checked my emails incoming and sorted. I left it for about 10 minutes (had a cup of coffee). my back, the screen was blank and I can't get the screen lights up at all. Happening almost6 whenever I try to use this computer.

  Was the only one to get things going is to press the Start button until the laptop stops. Press the button to start it, she, then crosses all loading windows files once I selected "Safe Mode" I tried all the suggestion of options and never led. If I simply select Restart things return to normal. I can connect and everything seems ok. and I can do what ever I need to do t.

  I try to keep active, if I leave it at any moment that it goes back in the fatal sleep.

  I ran Norton "Scan now" on the two hard disks, no problems found.

  There are a few times, I saw a strange color screen (multicolor), not what I would describe as a blurry screen. I wondered if it might be a graphics card problem, maybe not.

  Any suggestions?

  Hello

  It is quite difficult to understand why this happen. You wrote about the deep sleep. How to understand this?
  Deep sleep is for me the status of hibernation, but if I understand you just your laptop is on but just your view is DISABLED. Can you confirm this?

  Have you tried to change the options for standby power, hibernation or even show OFF?
  Check out all the options and set it to "never."

  What happens when you do this? The same reaction after 10 minutes again?

• Phone goes into silent mode automatically

  My Moto X goes into silent mode automatically when I get a call. and the rest in this mode until I have to manually increase the volume. I have not modified parameters or installed any new apps out later. How can I solve this problem? I'm on the vodafone network.

  Thank you

  Are you going to try from your phone in safe mode and test this it? If this does not happen in safe mode it is most likely caused by a 3rd party app. First things first and this test in safe mode. I hope this helps.

• My Satellite Pro L Gets a BSOD after going into sleep

  My Satellite Pro L Gets a BSOD after going into sleep
  We spend whenever my laptop is asleep or in hibernation.
  When she comes back, it goes to BSOD.

  Can you help me please?

  What cell phone do you have exactly?
  What operating system do you use?

  Have you tried to reinstall the OS using the recovery CD?
  You update the OS?
  You update the BIOS?

• my notebook, ProBook 450 G2 go goes into sleep mode when well even parameters of energy set to never.

  My notebook, ProBook 450 G2 goes into sleep mode when well even parameters of energy set to never. The operating system is Windows 7 Professional.  I had a technician Microsoft verifiez_ the. I also had HP tech check the. They both said that it was a hardware problem. I sent it to HP to fix it and they replaced the motherboard and said that they have tested. When I came back, it entered into mode 'sleep' again. I left my laptop for about 15 minutes and when I came back it was in mode 'sleep'. This always occurs after the laptop remained for about 15 minutes.

  Does anyone have a solution?

  I sent my laptop repair HP. They replaced some cables and motherboard, but it does not solve the problem. They finally replaced the Windows 7 operating system. Basically they gave me a new system. I spent 3 days to update windows with all the updates and then re-loading of my programs. What a mess!

• Satellite Pro C660 goes into sleep mode, even if I use Internet Explorer

  When you use Internet Explore particularly in webmail or remote access, the computer does not recognize typing and goes into sleep mode.

  I've updated the BIOS and it is not fixed.

  Hello

  Before talking about possible fix or workaround solutions, could you please give some info on your laptop model and the system?
  Have you tested the laptop with the factory and preinstalled Toshiba system parameters?

• Satellite L50-B-1HU randomly goes into sleep mode

  Randomly, my laptop (Satellite L50-B-1HU) goes into sleep mode.
  It happened at least 10 times in the last two weeks.

  Once by chance, he goes to sleep he requires the power button to turn, but the power button should be 1 to 3 times, as it can to sleep just after pressing the power button.

  Its happen even if the pad is in use. In windows power options, I turned also to disable the mode 'sleep'.

  The laptop itself has been used for two weeks (which has passed since the first use)

  Any advice?
  Thank you

  Like Notepad running in the power of the battery or also using the power adapter plugged?
  From my point of view of a few notebook could enter the mode "sleep" due to low battery.

  Also some 3rd party application preinstalled on the laptop could set the camera in mode "Eve".
  Guess what: try to start the laptop is safe mode and let it run for a longer period of time. It would be interesting to know if the laptop would be access to the sleep mode using safe mode.

  You can also use the command "powercfg. Windows 8 PowerCfg has a useful switch called - energy.
  This technique is valuable to solve sleep problems.
  Start the console with the command: cmd.
  In the console type: powercfg-ENERGY

  Now it takes 60 seconds and will create an HTML file that you can open in your web browser to get the full report of energy. Now quite sure if the information could be useful, but it might be interesting what details this report would provide.

• What can I do if the TV turns on and goes into sleep mode? Standby blinks 9 times

  Model KDL-46xbr2 power button press that TV is available on any photo goes into sleep mode which flashes 9 times stops and continues to blink 9 times

  Where is the help people?

• Music on iOs 9.2 playback stops when the phone goes to sleep

  I get a lot of e-mail music files.  I used to be able to read the files, leave email and use other functions, and could still play music.  Now when I go out of the enamel, the music stops when I upgraded to 9.2

  So, I listen to music from an e-mail and hung up and when the phone "goes to sleep" music station.  It didn't happen before 9.2.

  Please fix this.

  I have the same problem. In my case, the music also stops when I get out of the e-mail application.

  Please, how to fix?

• What printer goes into sleep mode computer stops

  just got a hp7520 as a gift. updated from xp to 7. If the printer goes into sleep mode, the computer shuts down.  currently I'm keeping the printer in demo mode so that it does not expire.  Anyone know how I can use printer without him turning off the computer in normal mode?  I talked about Noone has even heard of that happening.  I hope someone can help. Thank you!

  Hi @JNBLanocha

  My stomach says mt that perhaps you have the printer USB cable connected to a USB 3.0 port on your computer instead of a 2.0 port. The image below is some examples of 3.0 ports.

  

  3.0 ports are supposed to be backwards compatible, but I've seen questions arise.

  I wonder if the cable you are using is the computer and causing problems pulling power. All I can do at this stage is to assume and to gather information. Please post back with the answers to the following questions;

  1. You have a USB connection
  2. If the USB is connected, you use a 2.0 port or 3.0?
  3. Again, if you use a USB connection type, have you tried another USB cable? It could be a cable problem.
  4. You put XP or you remove XP and install Windows 7?
  5. You have your printer connected directly to a power outlet, or you are using a power strip/bar, or a surge protector?
  6. Now this may sound silly, but you have a timer on your computer, such as the hibernate after so many minutes and maybe the computer and the printer are set at the same, it is possible the moment closures / sleep coincide.

  I look forward to hear from you and to work towards a solution.

• Monitor goes into sleep mode

  I searched in vain for answers to my question, can anyone help?

  My monitor LCDS240HLBID goes into sleep mode when the PC is turned off, is there an off button to monitor?

  Thank you very much!  It was really frustrating me.  There is nothing in the manual referring to it.

  Best regards, Ladyhawke

• When my computer goes into sleep mode, I have to press the power button to turn it back on.

  original title: sleep/hibernation

  When my computer goes into sleep mode, I have to press the power button to turn it back on.  I used only having to press a key on the keyboard.

  Can someone tell me how to solve this problem, as if it was before?

  Well, on the theory that your computer is awkward, try to change the settings to another thing and OK your way out the control panel.  Then go back and put them in the way they were and OK your way out.  Occasionally, it will reset the internal parameters and things can return to normal.

  HTH,
  JW

• Monitor goes into Sleep Mode immediately after the connection to the motherboard

  Hi all

  My problem is like this.

  I have a desktop crt monitor. When I give power to it without plugging it into the motherboard, it's showing a message 'no signal' all the time and never goes to sleep mode.

  But when I connect it to the motherboard, the monitor goes into sleep mode immediately. When I delete the connection of motherboard once again, it's back mode 'sleep' and saying 'no signal 'again.

  Any other monitor works well with this office properly.

  This same thing happens when I am trying to connect this monitor to my laptop as an external display device.

  What could be the problem?

  Kind regards

  James

  Hi Ty,.

  I suggest that you check the manual of the monitor to check the frequency of the monitor support.

  It seems that the monitor is defective because the other monitor works fine.

• Vista goes into sleep mode automatically just after the restart

  The following problem was irregular. Sometimes, other times not. I'm totally frustrated as to why it is happening and I would like to solve this problem, now and forever.

  Yes, first facts: I have an Asus G71Gx laptop game with Nvidia Geforce GTX 260 M. 6 GB of memory, Windows Vista 64-bit. Do not think that other information is necessary, unless I'm mistaken.

  The problem: well, just after the start/start my laptop goes into sleep mode. As in, Windows starts fine and I see my desktop with all the shortcut icons and the background, and then all of a sudden the screen goes black (with two Dim lights blue on the screen - fellow Asus G71Gx users will know it), and the power led button flashes slowly in and out, as if it was in sleep/hibernation. The led light cover mode monitor "sleep". I did the whole "all never put under power options. I've updated my Nvidia graphic drivers for later. I even disabled Hibernate in the command prompt. Seriously, I have above average PC knowledge. But it has trampled me... everything short.

  Sometimes, I have to go through this cycle up to 9 or 10 times and then stops. Other days there is no question. But I still have to reboot just to be safe and to avoid the game stutter (another question that I don't know what it is, since I was the latest GPU drivers). But I can live with that.

  It cannot be an overheating GPU. I mean, it's at the start and at the present time, it is cold enough to have this piece as a cooler for the GPU! Haha.

  I thought about possible power supply problems. But how to test it? The laptop doesn't have it, the first week I got it. I use an adapter to put the American card in European decision-making.

  It is the ONLY major problem I have with this laptop. Sleep at startup. The other two, being game stutter if I don't restart my laptop and double tapping (seems to be an Asus problem according to the forums), are quite minor and I can live with that.

  Any help with this would be GREATLY appreciated. I'm VERY tempted to get windows 7 and do a clean install, but Vista was not really giving me any problems. But if I know that this issue is associated with Vista, then I say Bravo to Vista...

  Edit: Apologies for writing this thread Windows 7 and explore the internet forum. Don't know how it happened! Well I'm leaving here now, and hopefully this will get sorted.

  After 2 replacements of mobo that apparently caused this same prob, what finally fixed for me has been updated the chipset drivers.

• external unknown device after device, hard drive or the printer goes into sleep/hibernation

  I guess that the problem occurs when each device goes into sleep/hibernation because this is happining to only my external hard drive and printer.  All other devices connected by USB have never no problem and will not go to standby or Hibernate. Difficulty I should close down then cold restart without connected device. then after the system is installed and running reconnect the device then it is recognized and works. I tried to just the printer powerdown (cables power and usb for printer peripheral but comp still running while still not recognized after that repower printer and then usb connection get 'unknown device'.)  The only way to obtain a recognized device, DHM or printer is as above full stop and then reconnect.  Any help would be greatly appreciated because it really is a pain and has cost me a printer that I threw out the window, luckly the window was open.  Thanks again for your time and your help very frustrated JK

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  Method 1:

  I suggest for the link and try to run the Troubleshooter:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  Try to update the device drivers and check if it helps:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Check out the link for more information:

  Looking for drivers

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  Let us know if it helps.