Phone numbers appear blue when the white value in design mode

Similar Questions

• Rings of color on 1131 is not appear blue when the associated devices

  Hello

  I have a few 1131 that host SSID wireless, and most work in accordance with the documentation, which means that the color ring is green light when it is waiting for a connection and blue turns once an association is going. We seem to have discovered two AP that begin to light green, and when an association happens they turn dark green instead of blue?

  Please tell me that someone has seen this before. We have also upgraded to the latest version of the firmware on the devices in question and see the same result. I thought I would wager a guess as to what could be the problem but I'm probably wrong. Maybe the filaments that make the blue color are damaged?  Pretty crazy, but let me know if you have seen this before.

  Thank you

  William

  1131 aPs that do not show the color rings appropriate when users are associated are considered as having a hardware failure and need to be replaced. Replace the units with defective color rings.

• Lowered target Version 9.0 or later form and now the validation messages are appearing, even when the Show Messages dialog box is set to "do not display any message boxes at all."

  Hi all:

  I went a form target version of "10.0 and higher" to "9.0 or more ' and now I get messages from automatic validation of Adobe to appear, even when the Validation of the form of the document is set on"don't show all the message boxes at all."

  Any thoughts?  I have listed some other form to 9.0 and higher and the same setting form Validation works "do not want to display all message boxes".

  The only thing I can think is the decommissioning of 10.0 to 9.0 or more did something?

  Thanks in advance,

  Brian

  without knowing what the errors are, it is difficult to say what the problem is. Forms are usually not popups unless you use FormCalc. Then, the software is displayed a FormCalc error.

• How to end loop when the desired value is found.

  Hi I have a loop below and I want the loop at the end when the desired value is found.

  <? PHP {? >}

  <? PHP $allvotedid = $row_VotedUsers ["VotedID"]? >

  <? PHP} while ($row_VotedUsers = mysql_fetch_assoc ($VotedUsers));? >

  I want this loop to the end when $row_VotedUsers ['VotedID'] is equal to the variable URL ID. So lets say pagename.php? ID = 1, I want the loop to go until he finds an ID value which is 1. And then I want this set to $allvotedid. And if detects any value to it then I want to stop a loop.

  Thanks for any help. I hope I made that clear.

  cwhazzoo wrote:

  Hi I have a loop below and I want the loop at the end when the desired value is found.

  The following will do what you asked:

  However, it is a very inefficient way to do it. If you are interested is whether the code transmitted through the URL is in the VotedID column, simply create a Recordset by using the URL parameter ID ($_GET ['ID']) as the filter. Then check the value of $totalRows_VotedUsers. If it is 1, the user has voted. If it is 0, the user has not voted.

• Dv6 7000: charging does that when the lid is closed (sleep mode)

  I have a laptop HP DV6 7000. The battery doesn't work that when the lid is closed (sleep mode).

  If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost full.

  If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support).

  Several different Chargers give identical results. EACH of them is fully charge the battery in two hours; as long as the cover is closed. If I open the lid, even to say 50% load, the orange light glows white and the battery icon always says: _ % available (plugged in, does not support).

  Thank you, Ed.

  Hi @ElyMayor

  Thank you for your response.

  The last thing I can suggest to try a restore to factory.  Performing a recovery of system HP (Windows 7)

  While the recovery, there is an option to backup your personal files. If you have not already done so, it is now a good time.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  Alternatively, you can contact HP support for assistance. They can access your system remotely to help alleviate the difficulties.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

• Continue to application play when the device goes into sleep mode

  Hey guys,.

  wondering if anyone knows how to maintain an active application when the unit goes into fashion watches?

  My application needs continue to work when the device goes into sleep mode if he went in that State by itself, or if the user put it to sleep.

  Yes I tried it on a physical device. It works, I promise you

  To clarify, here is what you will see when using KEEP_AWAKE:

  1 device shall not sleep when the application is currently active

  2. the device shall not sleep if the application is reduced, and you are in mode carousel

  3 device WILL sleep if the user switches to another application and full screen.

  In addition, another thing to know, if the unit is not assigned to the showcase mode, which is not by default, the audio stops when the user leaves your app. This is not related to sleep and is totally out of our control, but could be a good thing to add to your product details.

• put the offline data file when the database is in NOARCHIVELOG mode

  My question is when the database is in log mode Archive No. I am not able to take the database offline.

  When I tried in my computer I noticed set-aside.

  CASES1:

  SYS > alter database datafile 5 offline;

  ERROR at line 1;

  ORA-01145: offline immediately rejected at least media recovery enabled.

  case 2:

  SYS > alter database datafile 5 immediate offline;

  ERROR at line 1;

  ORA - 00933:SQL not correctly completed order

  CASE3:

  I tried the command drop alter database datafile offline 6; (in NOARCHIVELOG mode) and it is to show the same effect that alter database datafile offline 6; (in ARCHIVELOG mode).
  

  * In NOARCHIVELOG mode are we really drop the data file to use the offline data file? You please tell me the effect of the dropkeyword.

  Oracle protects you. Please review ARCHIVELOG and NOARCHIVELOG mode.

  When you take the database offline in NOARCHIVELOG mode:

  (1) the file is offline

  (2) the RCS in which you took the database offline will be is more to be in the online redo logs

  (3) at this point, you need to perform a media recovery to enable again the file online (ie. restore the database)

  So you can see why you shouldn't do that.

  The DROP Offline command does not actually remove the data file. It removes the control file file details and updates the offline data file. It can be used for purposes of recovery or when you actually plan on deleting data files.

• phone numbers appear as underlined links?

  I have phone numbers on my master page. Publish that they show of puppy online. Blue and underlined?

  Select your text to link in the links (hyperlinks, Word orange) tools you will see an option to change the styles

  

  Click on that and you will be taken to the Panel link styles. Click on the little square below the list of sales link to create a new style.

  

  Rename your new style in telephone link or as you want so that you know what it is and then change the colors etc. for this new link style.

  

  Then back into the tool links you will now see your new style of link as an option in the style of link drop-down.

• While the loop does not stop when the two values are equal using equal to comparitor

  Hello world

  I have a really, really strange bug. I have a LabVIEW VI that change a chain on a power supply. I have a start and a stop voltage and use a while loop to increment the device. For example if I want to scan from 1, 2V to 2.2 V in 0.2 V incremements, the program will end when "The current tension" = "stop the tension." And it works very well!

  However, when I start - 3 V and want to stop to say-0.8 (new in 0.2 V incremements) the program does not stop when "The current tension" = "stop the tension." I checked with the probe close to what should be the end of the race and - 0.8 V goes both of the entries ' equal to ' comaprison operator, but that his can't trigger a real result.

  It's very strange for me. Espeically as if I'm going - 0.8 V to-2 V but decrement of-0.2 V, the program stops correctly!

  I am very confused!

  See you soon!

  Search on: comparison of floating-point numbers

  The second thread is particularly relevant. This discussion was 2009, but you can find that the same "bug" being reported to enter the end of the 1980s.

  Mike...

• Computer screen appear not when the cover is open, please help!

  I use my 19-inch LCD TV as a monitor for my computer laptop windows 7, because the built-in screen broke some time it y a. yesterday, I changed the settings so that whenever I close the lid of the laptop, the screen is always displayed on the TV, but now, everytime I open the cover, broken laptop screen lights up and the connection to the TV is lost , but when I close the cover image appears upward on the TV again. I tried changing the settings I changed back. Anyway I can fix this without a keyboard? Because the only one I have is on my laptop and inaccessible without the lid open. Help, please!

  Hello Hipster,

  Being this recent, try a system restore to the most recent point when everything worked very well.  See http://www.sevenforums.com/tutorials/700-system-restore.html for more information.

  Good luck!

  Kosh

• Tree control mode: Returns a validation event when the NORMAL value

  CVI 2013: I am writing a software to change the command tree modes based on the user's selection. I noticed that when the command is set to NORMAL, I got a "EVENT_COMMIT". Just for reference, I am using a custom control - group of Radio buttons, but the bug (I'm assuming that) is in the tree control are I forgot something?

  An application of Corrective Action (CAR) has been filed for this behavior. His number is 578618. You can monitor the condition of this CAR by checking the notes Readme or release new versions and checking the bug fixes section.

• Problems with Illustrator CC 2015 curved inner soothing brush even when the exact value.

  I'm having a problem where I draw something with the Brush tool with my wacom pen and it looks fine until I got let go and then it's as if the post drawing render distorted and it too smooth inside the curves according to sharpness, they are. I adjusted the brush settings... STROKE... precision smooth verse... nothing seems to solve this problem.  I have an identical to the office computer and it does not it so makes me think that there is a setting applied effect that I'm just missing. I enclose some images of what I mean. Any ideas on what could be the cause?

  The first image is as I paint before I lift pen up to complete the race.

  

  The second image is what happens when the race is based in fact after I lift the pen and finish the race. Notice the change to the inner parts of the curves almost straightening. Note: the curve of the stoke itself is actually always where I drew but the visible thickness on the stoke is what seems to change, even if developed.

  

  

  The other two are my applied settings.

  

  I reinstalled the two illustrator and my wacom records, thinking that perhaps issues as well. nothing has changed. I use this tool quite often but it's been several weeks that I modified it used. I don't seem to have this before show and as I mentioned on an identical machine has not there must be something central to this right machine? We even compared the brush options and tool but seemed okay if they were the same or not. Ideas?

  help U or traits of curly form filling space

• time machine updates when the iMac is in sleep mode

  Should I stop using energy saver, when is my time machine backup. In the past, I noticed that when I was copying files copying stopped when the machine went to sleep snd started again when I woke the machine.

  What is there to back up on your computer when it is ' sleep?

  I put my iMac to sleep every night.  Never a question of backup w/Time Machine because there is nothing to back up!

  

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• Dell inspiron w / xp sp3 stops when the lid closed only in mode standby

  Dell inspiron e1505 on windows xp sp3 will stop when the lid closed mode standby. In "idle mode" it shuts down for a few seconds then screen turns on and I can work as usual.  Why is it turn off in standby mode?  Happens in AC mode and battery.  is it a software problem or a hardware problem.  I see others with the same problem and vista dell.

  http://support.Dell.com/

  Dell support.

  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

  Contact Dell

  http://en.community.Dell.com/forums/

  Dell forums

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner