Phones not generating MS files

Similar Questions

• Why sometimes Eclipse do not generate alx file and cod?

  Hello everyone, I have a strange question, sometimes, when I'm programming and to run my applications in the Simulator, everything seems fine, but sometimes after making some changes in my source (add new classes) and running againg the application simply don't change absolutely nothing, I saw my files and I have notice that when this happens because the alx file and cod are not generated by eclipse why this, happen is because of the way of programming?

  Thanks for your time!

  See the link below:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/796557/800738/800901/...

  And also check out the link in my signature for some basic tips on the installation program.

• Migration - MySQL to Oracle - do not generate data files

  Hello
  
  I have been using the SQL Developer migration Assistant to move data from a MySQL 5 database to an Oracle 11 g server.
  I used it successfully a couple of times and its has all worked.
  
  However, I am currently having a problem whereby there is no offline data file generated. Control files and all other scripts generated don't... just no data file.
  It worked before, so I'm a bit puzzled as to why no logner work.
  
  I looked at newspapers of migration information and there is no errors shown - datamove is marked as success.
  I tried deleting and recreating rhe repository migration and checked all grants and privs.
  
  Is there an error message then it would be something to continue but have tried several times and checked everything I can think.
  
  I also tried the approach of migration command-line... same thing. Everything works fine... no errors... but only the table creation and control script files are generated.
  The schema of the source is very simple and there is only the tables to migrate... no procedure or anything else.
  
  Can anyone suggest anything?
  
  Thank you very much
  Mike

  Hi Mike,.

  I'm so clear.
  You use SQL Developer 3.0?
  You walked through the migration wizard and choose Move Offline mode data.
  The generation of DDL files are created as are the scripts to move data.
  But no data (DAT) file is created and no data has been entered in the Oracle target tables.

  With offline data move, Developer SQL generates (saved in your project, under the DataMove dir directory) 2 sets of scripts.
  (a) a set of scripts to unload data from MySQL to DAT files.
  (b) a set of scripts to load data from the DAT files in the Oracle target tables.
  These scripts must be run by hand, specifying the details for the source databases MySQL and Oracle target.

  "no offline data file generated. Control files and all other scripts generated don't... just no data file. »
  «.. . but only the creation and control file table scripts are generated. »

  What you mean
  (1) the DAT files are not generated automatically. This should, if we need to run the scripts yourself
  (2) after manually running the scripts that the DAT are not present, or that the DAT files are present, but the data does not load in Oracle tables.
  (3) the scripts to move data in offline mode does not get generated

  Kind regards
  Dermot
  SQL development team.

• Edge animate not generate css file

  All-

  I've been going through some tutorials animated edge online and most of them refer to editing the CSS exteranl file that generates edge.  I can't find this file.  Indeed, the styles are incorporated into the html file.  I've updated to the latest version of the edge, but I can't get the software to generate a css file.  Any ideas.

  See you soon

  Zontaluma-

  Have you looked in the file: pageName_edge.js?  It would be in the same folder as the rest of your files from edge.  Edge combines the css and js files for speed...

  James

• JHS 10.1.3.1.26 not generate beans folder Page

  I generate all checkboxes except tab checked 2 level for all pages in the application, but JAG does not generate the page <>- beans.xml file controller for some groups; renamed copies of groups that do not generate bean file that sometimes generate bean file (the first time they are generated after copying it seems).
  
  Idea: The application has more than 100 pages and I notice a single line entry in common beans file that contains the name of each of them. This line for us is 12 000 characters. Is there maybe a limit on the length of the line for the ADF Scanner?
  
  Any other ideas?
  
  Thank you
  Peter

  Peter,

  I can't reproduce this behavior. Are you sure that you are not looking bean xml files that no longer have a corresponding group of JHeadstart?

  For the long line, I assume you mean the javax.faces.CONFIG_FILES - param in web.xml context?

  This is a standard feature of JSF and unrelated to the generation of JHeadstart. If this line is too long, it would mean that you get errors when running because some beans is not found.

  Steven Davelaar,
  JHeadstart team.

• Export error records 'diagnosis package cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Hey, gentlemen!

  Trying to export logs from VMware vCenter Converter Standalone v 5.5.2 and this error occurs.

  "The package of diagnosis cannot be recovered from VMware vCenter Converter Standalone. "Error: could not generate file diagnosis of VMware vCenter Converter Standalone server.

  Can he save data to the file journal, but only coverter_gui newspapers, nothing else.

  Google search returns no results at all.

  What could be?

  OK, it is resolved after you restart the converter Services.

• not generating the trace for rdf report by oracle apps file

  Hi all
  
  
  in fact, we aim to generate trace file for reports and a convert to text file using tkprof by simultaneous program unix shell script submit using fnd_request.submit_request in another program of concurrent proceedings. but all the reports that are created by using pl/sql generates the trace file, but rdf report does not trace file.
  
  Report generator Oracle 6i is used
  
  Oracle application is 11i
  
  List of measures are being taken to get the trace file are
  1.SRW. USER_EXIT (' FND SRWINIT' "); before the release of report
  2SRW. USER_EXIT ("FND SRWEXIT'"); in after the report
  
  another of the measures which are followed
  SRW.do_sql ("alter session set SQL_TRACE = TRUE'"); before release of the report
  SRW.do_sql ("alter session set SQL_TRACE = FALSE'"); in after the report
  
  above, said steps are done, but still it does not arouse any trace file
  
  same oracle_process is null
  
  Select oracle_process_id from the fnd_concurrent_requests where request_id
  
  ID processOracle for this report oracle rdf file is not generated.
  
  
  Please help me in this issue
  
  Thank you
  
  Published by: 797525 on October 12, 2012 12:43 AM

  Add the following line before the outbreak of report
  SRW. DO_SQL ("alter session set events = tracefile_identifier" trace 10046 name context forever, level 4 "=" REPORT ' ")

  Trace stops automatically when the report closes.

  In addition, what program submits the script fnd_request.submit_request... shell / pl/sql procedure?

  you initialize apps FND_GLOBAL. APPS_INITIALIZE before submit_request of shooting?

  Make a DNF: active Log Debug = Yes and check the table of fnd_log_messages

  See the following MOS docs:
  Oracle 6i [ID 111311.1] follow-up reports
  See you soon,.
  ND
  Use the buttons "useful" or "correct" to award points to the answers.

• Bridge CS6 do not generate correct thumbnails of RAW files

  I am running Bridge CS6 (the latest version, 5.0.2.4) on a MacBook Pro (OSX 10.9.1) 2013 and suddenly from now bridge is longer update thumbnails for my RAW files. All other images and video file formats have generated thumbnails, but not my raw files Nikon NEF including those I worked on ACR. I tried to purge all of the cache, restart of bridge and even restart my computer and always raw thumbnails are not generated.

  Any advice would be appreciated thanks.

  Eric

  In fact I just noticed that thumbnails for JPEGs will not be generated. A thumbnail is generated that if I'm working on a file in Photoshop and then save it.

  Make sure that you put free space of the disk cache.  You should have at least 15%.  For a ride from 700 free g 100 g.

  Have reset you the preferences?  Hold down the option key and launch bridge.  You will get a window to reset.

• Can generate the file TKPROF without the SQL does not finished?

  Hi all:
  I want to generate the TKPROF to the trace file file, can generate the file TKPROF without the SQL does not finished? The file TKPROF can be used? because the report is too large. My environment is ORACLE 11.5.9
  
  
  
  
  
  Concerning
  Terry

  Yes, you can run a tkprof on one incomplete (or currently being created) trace file.

  HTH
  Srini

• Trace file is not generated

  Hello
  
  I use Oracle 10 g Rel2.
  
  I'm trying to generate the trace for a session using DBMS_SYSTEM file.
  
  First of all, I used DBMS_SYSTEM. Procedure SET_SQL_TRACE_IN_SESSION to generate the trace for a session, but that file was generating trace udump directory files. Then I checked on the net and found that we cannot generate the trace file in this way for active sessions.
  
  Then I tried to use DBMS_SYSTEM. Procedure SET_ENV, same results. It also generates trace files?
  
  No idea why this is happening? In addition to around how long should I activate trace?
  
  
  
  
  Thanks in advance.

  It does not generate all trace file unless drawn session perform some activity.

  Lukasz

• Trace SQL file is not generated in job scheduler

  Is there a reason why the trace file is not generated when you use this command?
  
  Start
  DBMS_SCHEDULER. () CREATE_JOB
  job_name = > 'COLCO_TEST ',.
  job_type = > 'PLSQL_BLOCK ',.
  job_action = > ' START DBMS_SESSION. SESSION_TRACE_ENABLE (TRUE, TRUE); END;',
  enabled = > TRUE,
  start_date = > NULL
  );
  end;
  /
  
  Job runs successfully, but no trace file is generated.
  If DBMS_SESSION. SESSION_TRACE_ENABLE (TRUE, TRUE); It is called in sqlplus trace file is generated.
  
  Any ideas?
  
  Thank you

  Hello

  Have you checked the file ora_j*.trc that it contains any trace in it. (Because they are the background process)
  Furthermore, I don't see any statement which would be the trace of this work. As he start tracing and then the task finishes.

  Concerning
  Anurag

• Menu 'Generate ALX file' does not exist in Eclipse

  Hello

  I use Eclipse 3.5.2 Java plugin 1.1.2 when I select the project, there is no menu "generate ALX file.

  I looked at the xml description of the project, there is no option to enable this feature.

  Please notify.

  Project description xml suite failure part...

• Common interface of JS does not work for me when I check the generated swf file

  Hi all

  Get up to speed on the use of Javascript and 8 Captivate. I work with what adobe own examples discussed here: JS Common interface .

  I downloaded the project, published under the title of HTML5 and SWF and posted on our server.

  HTML 5 version

  Open the swf file

  When you click on the buttons in the HTML5 version, you can see the content of the change of the content area. This does not happen in swf (the XML is a counterpart of the swf file in the same directory)

  Looking at their model of box, I think that maybe they mean that the html page must be involved for the js to work (that is, you need to link to the page instead of the swf file)? Maybe this is already known by everyone else, so forgive me... but can you just use the swf file (in this case, including the XML with it) and do the work of javascript?

  In the end, I really don't need features xml... I'm just trying to play an audio file and give buttons, click on a State visited and in the context, I'm trying to use it, I can only download a swf file, not a html file that displays a flash element. Maybe there is an easier way to do... But I didn't pursue a js route if js will not run in this case.

  Thank you!

  
  

  I think that you need a html file to make javascript work.

  You can use advanced actions to display a different button once the original has been clicked.

• Externalize strings not generating a CSV file translations

  Hi gurus,
  
  I need to do outsourcing of presentation layer, so doing it, I activated by clikcing to outsource the table on the area in question and after I have go to tools-> utilities-> externalize strings-> run
  
  the csv file, it creates is having only the English, I don't get the translations to other languages in the csv file. I m hit there.
  
  Pls help!
  
  
  Thank you
  Anthony

  Hi Anthony,.

  The generated CSV file will be in English only. If you try to just change in OBIEE Presenatation layer to another language, you need to perform operations of addition after the export of the CSV file on your machine.

  Look at this article: (I think that's what you're looking for);

  http://oraclebizint.WordPress.com/2007/10/29/Oracle-BI-EE-101332-presentation-layer-translation/

  Kind regards
  -Laurence.

• Additional panel in the panels and controls in the Panel generated .h file

  I have a sign in my project, it is called LO_LVL_PNL.

  The generated header file seems to think that there are more. Here is the 'Panels and controls' section on the generated header file:

  / * Panels and controls: * /.
  #define  DITHER                           1
  
  #define  DITHER_CLOSE                     2       / * callback function: DITHER_CLOSE_CB * /.
  
  #define  DITHER_Dither_Settings           3       / * callback function: DITHER_CONTROL * /.
  #define  LO_LVL_PNL                       2
  
  #define  LO_LVL_PNL_SENDBUTTON_2          2       / * callback function: DIDsBUTTONcb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON_3          3       / * callback function: EraseBUTTONcb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON_4          4       / * callback function: SENDBUTTON_noe_cb * /.
  
  #define  LO_LVL_PNL_SENDBUTTON            5       / * callback function: SENDBUTTONcb * /.
  
  #define  LO_LVL_PNL_RESET_CAN             6       / * callback function: RESET_CAN_CB * /.
  
  #define  LO_LVL_PNL_UUTRESPONSE           7       / * callback function: UUT_RESPONSE * /.
  
  #define  LO_LVL_PNL_CLEARBUTTON           8       / * callback function: CLEARBUTTONcb * /.
  
  #define  LO_LVL_PNL_EXIT_BUTTON           9       / * callback function: cb_quit * /.
  
  #define  LO_LVL_PNL_Comm_Set_TEXTBOX      10
  
  #define  LO_LVL_PNL_COMMANDBUTTON         11      / * callback: CheckState * /.
  
  #define  LO_LVL_PNL_COMMANDBUTTON_2       12      / * callback function: Select_Files_DID * /.
  
  #define  LO_LVL_PNL_BINARYSWITCH          13      / * callback function: SetProgram * /.
  

  in my IUR I can find LO_LVL_PNL components, but not parts of DITHERING.

  Then, I renamed my generated header file, so it can regenerate without these additional items, but they get included when I recreate it.

  In the file of the UIR, if I double click on he Panel it opens and displays that the Panel is called LO_LVL_PNL.

  It started because I'm trying to read the value of a switch on the Panel, and in the call, I get a runtime error that follows:

  GetCtrlAttribute (LO_LVL_PNL, LO_LVL_PNL_BINARYSWITCH, ATTR_ON_VALUE, & on_off);

  NO MORTALS RUN - TIME ERROR: 'gui_handler.c', line 135, col 13, thread id 0x0000179C: library function error (return value ==-42 [0xffffffd6]). The handle is not a panel handle

  I don't know if it's two separate issues, or DITHER things cause the error; but I need help to fix both.

  The first parameter to GetCtrlAttribute() must be the handle Panel, not the ID of the Panel. The handle is returned by your LoadPanel() call.

  Do you already have a group called DITHERING? Copied from an earlier project, perhaps? Perhaps the editor of UIR has hidden or placed outside the screen. Try using the option editor find to see.

  JR