Photo cannot remain in place if the browser resizing

Similar Questions

• Why my photo cannot be displayed correctly in the edit mode

  Hello, I am a new user of lightrom 6. Why my photo cannot be displayed correctly in the following editing mode? I can't see the picture, so I can't edit or customize.

  

  Please notify.

  Kind regards

  William

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Newb: cannot display PDF files in the browser

  I have a new Windows 7 computer and have installed Acrobat Standard 9.3.2 and Reader 9.3.1.

  Whenever I try to 'download' (i.e. display) a PDF file in the browser IE (or Firefox 3.6), I get the following error message:

  "The Adobe Acrobat/Reader that is running cannot be used to view PDF files in a Web browser. "

  Adobe Acrobat/Reader version 8 or 9 is required.  "Quit and try again."

  The error remains the same that either Acrobat or Reader race / is not running before the attempt to download.  My workaround solution is to save the file to disk, and then open it.  It is a pain and should not be necessary.

  Any advice anyone can give me to fix this problem will be received with thanks a lot!

  FastKick

  Discussed several times that Acrobat and Reader should NOT be installed at the same time, because they confuse between them

  Uninstall the drive, and then create a repair Acrobat installation

• Cannot open PDF files in the browser. I tried every fix mentioned and it still does not work!

  I have Windows XP. Using firefox as my browser. All of a sudden, I can't open the PDF files in the browser. I tried all the mentioned patches. Nothing works! Check the configuration of the plugin, checked the settings Adobe Reader.

  Is the problem that Firefox opens a blank tab, or that it requires you to download the file?

  I guess you tried switching spectators between the internal viewer and the Adobe plugin. If this article does not, steps: How to disable the built-in PDF Viewer and use another Viewer. Sometimes behind switching will allow to correct an error in the settings file.

  You can rename or delete the settings file that stores these associations and have Firefox regenerate. If the file is corrupt, this could be the only option that works. Here's how:

  Open your current Firefox settings (AKA Firefox profile) folder using

  Help > troubleshooting information > "view file" button.

  Leave this window open, activate any Firefox window and quit the program (for example, the file menu > exit or Firefox menu > Exit)

  Pause while Firefox finishing his cleaning, then rename the mimeTypes.rdf to something like mimeTypes.old

  Restart Firefox. Your likely PDF preferences will be reset to the internal PDF Viewer, but you can activate the Adobe plugin as described in the above-linked article.

  Any improvement?

• Cannot connect Web site using the browser of Toshiba 32RL958

  Maybe this should not be «so smart TV...» »

  Trying to connect to any site that requires that a password fails. I know that I do not use the wrong password, but according to the website I am returned to the login screen or stay on as "guest".

  Any ideas please. I'm starting to get rather cut with what does not intelligent overall.

  Not clear why this is happening but maybe the browser can't save the cookie that is often necessary to connect to a Web site.
  Check in the settings, if something like this can change, but as much as I know the Internet browser via television does not provide the same options and performance as a common browser like internet explorer, chrome or firefox.
  You wait too long in most cases that you can use it only for common navigation and reading. For more activities smart tv, you need to use the apps.

• Cannot change Start Page in the browser based AIRHelp (TCS3)

  I changed the Start Page of a project of AIRHelp (from index.html), but despite the new html page being launched (as shown in the browser), aid still shows the default original page. Any ideas anyone?

  Mark

  The start page is what pulls the top of the window to three components. By default, it is called index.htm, you can change this in the page layout.

  The default theme is the subject that appears in the window of three components. You can change the heading that appears, by default, that you should not have a topic called index.htm because it would cause confusion.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• Navigation bar, filling of browser or image penetrating nav bar when the browser resize?

  Sorry, but a very simple question, I am not new to muse but seem to be faced with a problem of basic layout - I try to have a background image on a single page, but however I put it it seems to enter my top navigation bar when I resize the browser, I played with scrolling etc someone help please

  Hi, sorry,

  I had my top nav bar together and the logo on the left with a picture below, I tried plaicing that image in a rectangle also tried to use the browser fill and when I scrolled-window resized the image below in the navigation at the top of the page.

  I think I've sorted it now, but don't know how I did it.

  Kind regards

• RH2015 problem with text box placed remaining in Place on the Image

  Using RH2015 I find a text box placed over an image and set a trigger of the text in the content to the top of the image page to display / hide the (effect) positioned text box when you click on. The issue I see is that the text box is not positioned compared to the image on which are superimposed. Is the placement of a text box positioned compared to the outbreak, in this case, rather than the image you like? I use a reagent HTML5 output would therefore have a solution that would elapse from the position of the image and the changes in scale, remaining anchored.

  Hello

  What is the ultimate goal? Click on the image and see the text?

  I ask because there may be a better way to achieve the goal.

  Personally, I have never had anything but bad using positioned text boxes.

  See you soon... Rick

• Photoshop CC2015 anomaly, Marching ants remain in place when transform selection

  

  First time transform a selection since the update of last week and the ants remain in place while the processing area is moving?

  I'm on Win 7 with an R9 390 X with 8 GB of VRAM, running the latest Crimson drivers from AMD

  AFAIK Transform selection has always worked the way. Marching ants remain in place while your by dragging the transformation encompassing. As soon as you clear the trail of bounding box, the ants align with the limits of transformation. The transformation is still not committed until you press on enter. You can press ESC to cancel the selection transformation.

  Transform a layer works differently. When you drag, you see as preview across the pixels in the bounding box of the transformation.

• Help!  in the browser edition using third party host "530 Login." incorrect

  I'm putting in place in the browser edition for a company I designed a site for Adobe Muse.  The strange thing is that I really connected with his credentials and was able to change.  I sent him all the info and she can't get so I went to the log-in and I get this message:

  The user name and password are incorrect for your FTP server.

  Please check the and try again.

  Message from the server:

  "530 login incorrect."

  I went back and double checked everything.  I even created a new user of C-Panel on ipage and I still get the same message.  So very frustrating.

  Can you share what sites have this problem during the connection? If you don't want to share this in the public forum, you can use the "Get help" link in the upper right corner to change it in the browser to provide private with the team details.

• What replaces the browser

  Hello

  I've just updated in illustrator 10 and is the loss of the browser to be quite annoying. Realizing super smart workflow analysis happening by a huge company before eliminating the browser: where is the best method that takes place of the browser?

  Thank you, I realize that he have not yet found and feel a little stupid needing to ask.

  Garrett

  If you mean the browser panel, it is still there in all versions of Illustrator after Illustrator 10. Look under the window menu.

• Preview in the browser flaw

  I use Dreamweaver 9 with a MacBook. I used it fine for about 3 months. Until yesterday...
  
  Preview based on the browser suddenly stopped working, and now I get the message:
  
  "Cannot read an excerpt in the browser preferences. Please remove the list of all browsers and Add. »
  
  Unfortunately, however, when I try to add browsers through the custom of dreamweaver option preferences to accept a new entry and I just end up with an empty and pasted list.
  
  I see other people have this problem with dreamweaver 8, but no one seems to have posted a solution. I'd appreciate the help.
  Laurence

  See step 9 here:
  http://www.Adobe.com/go/kb401096

  --
  Concerning

  John Waller

• How to make the photos look in photoshop as they do in the browser?

  I'm editing photos for the web and I noticed that when I open a photo in Photoshop, the colors are very different, as they are when I open the same photo in any browser, the windows, the application of iPhone photos Photo Viewer, or even in the Preview 'save for web '.

  Now what I do is essentially editing blind photo then exporting to see how it will look really.

  I don't know if Photoshop does on purpose or if there is something wrong with my setup.

  My work space is defined as:

  • RGB: sRGB IEC61966 - 2.1 (the same as the embedded profile)
  • CMYK: U.S. Web Coated (SWOP) v2
  • Gray: Gray Gamma 2.2
  • Spot: Dot grain 20%
  • RGB/CMYK/Gray: Preserve embedded profiles / Ask when opening
  • Engine: Adobe (ACE)
  • Intention: perception

  My monitor is calibrated in Windows 10 color standard using the. The difference in color is the same on two different monitors.

  Here is a screenshot of the difference between the appearance of the photo in Photoshop and how it looks to the 'Save for Web' preview optimized (which is the same as the browser and other viewers the image):

  

  How can I get the workspace even are very close to what will be the final outcome?

  Additional information:

  Photoshop CC 2015

  Windows 10

  Photoshop version looks distinctly unhealthy with a strong yellow cast in the shade. I suspect a faulty monitor profile, probably one that you obtained through Windows Update. This happens very frequently.

  The thing is, Photoshop is color managed and uses the monitor profile to display the image. Other apps are not managing colors and do not use the monitor profile. If a defective profile does not affect them.

  Even save for Web displays without color management as you put in place. Overview of change "Integrated usage profile", which he spent in successful color mode, and he appears as the main window of PS does.

  Try to configure sRGB IEC61966 - 2.1 as your default display in Control Panel profile > color management. Restart Photoshop when done so it can load the new profile at startup:

  

• Photo Gallery can reorganize in subcategories + added new images through editing in the browser

  Hello

  I'm looking for a photo gallery that has the ability to rearrange the images displayed from the subcategories or tags. For example, I want to add a gallery which contains pictures, a projects of clients. The client wants to visitors of the site to be able to mix the Gallery to display only e.g. 'stone walls' or 'wood decking. A system of marking would be useful rather than having to load the pictures in each subcategory.

  The other consideration is that my client should be able to add new images with labels using the browser via Business Catalyst. So far, I've only managed by replacing the existing images rather than adding new images.

  Y at - it such widget for Muse or is there any other widgets wordp interested or another that could be incorporated into the work dot.

  Thanks in advance,

  Jimmy

  Hi Jimmy

  If I'm not mistaken, basically you want to provide users an option to select the category of images as they appear on the page.

  Muse, we cannot tag or categorize, also the module of British Colombia Photo Gallery does not provide this option, but there is a solution with web applications.

  You can create a web application and web then elements app in the form of images and then rank them. When page inserting the web application with the categories drop down, so when users select the category these items in web application would show on the page. In addition, you can add custom Web app fields to search using the keyword.

  With the edition, customers can connect to BC admin, then using the photo gallery or web app (if used) module to edit images, add new ones. IBE cannot be used to add new ones, but to replace existing ones.

  Useful links:

  http://helpx.Adobe.com/business-catalyst/partner/Web-apps.html

  http://helpx.Adobe.com/business-catalyst/partner/building-Web-apps-part-1.html

  Thank you

  Sanjit

• Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

  I get the error message, well known in the VM library window "Bundle" & lt; pathname & gt; "" / Boot Camp/%2Fdev%2Fdisk0/Boot partition.vmware.vm Camp "is damaged and cannot be opened."   However, my problem is not solved by the solutions proposed elsewhere in this forum.

  At the bottom of this post, I listed my host config and invited desired config.

  Here is a brief history, followed by what happened when I tried the solution of WoodyZ published here.

  • I had Windows XP Pro SP2 on my Boot Camp partition, but somehow ended up 'inaccessible' SigmaTel audio device and the Leopard installation DVD could not repair it.  I imported this partition to Boot Camp in the Fusion as a virtual machine.  This virtual machine is now stored on the external hard drive in "/ Volumes/ExternHFS/_CCCnonBackup/virtualMachines/Boot partition.vmwarevm"+ Camp.»  This virtual machine still works when loading in the merger, but the sound does not work, nor made a called M-audio Transit USB connector.  That's why I decided to create a new partition in Boot Camp with a SigmaTel audio device cool.

  • There are Kubuntu and NetBSD virtual computers stored in another default folder: yangguizi/Users / / Documents/Virtual Machines /

  • Using wizard Boot Camp in Leopard, I erased my Boot Camp partition and then recreated with a new installation of Windows XP Pro SP2.  (By the way, I've formatted this partition in NTFS.)  This Boot Camp partition is the device of SigmaTel installed and accessible from the control panel.

  So I wanted to make a virtual machine of the new Boot Camp partition.  When I opened the merger, I highlighted the new Boot Camp partition down and clicked on the arrow of comments are starting to the right.  A window saying "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. "That window remained open for 45 minutes.  Finally, I closed merge by clicking the choice of menu to quit Vmware Fusion.

  Thereafter, whenever I opened the merger, I saw the message "Bundle" / Users/yangguizi/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmware.vm "is damaged and cannot be opened.' " next to the new Boot Camp partition.

  When I highlighted this new Boot Camp partition in the VM library and you press the delete key, absolutely nothing changed, that I could see.  Right click on the list of this score showed that the menu choice 'delete' is gray.

  Then I closed the merger, and then manually moving the file to the trash "/ Users/yangguizi/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp / '.

  The next time I opened the merger, a new icon for the Boot Camp partition has been displayed at the bottom, with the subtitle "Powered Off".  When I clicked on the icon start Guest, a new folder/Boot Camp / was created in the same place, and the never-ending open window showing "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. " Blah, blah, blah.  If the cycle turned up.

  I am at a loss what to try next.  Here are three assumptions about the problem:

  1. Fusion has been confused by the three communities during which I virtual machines.

• Fusion has been confused by the fact that I have, potentially, two virtual machines called "Boot Camp partition".  The older is actually a virtual machine hard disk external.

• When I installed XP in the Boot Camp partition, the external Firewire drive was running. Then installing Windows saw much more of partitions on which XP could in theory have been installed.  This may have confused merge somehow, even if I successfully installed XP on partition C, which was 32 GB.

Did fix you this problem?  Even if you haven't, what do you suggest me I try next?

Thank you, Yang Guizi

Host hardware: 17 "MacBook Pro; 2.33 GHz cpu; 3 GB of ram; Boot Camp 32 GB partition formatted in NTFS. external hard drive with Firewire 800 interface, partitioned in an HFS volume + and an NTFS volume.
Host software: OS X Leopard 10.5.5; running VMware Fusion 2.0.1 build 128865; Tracks of partition Boot Camp newly installed Windows XP Pro with Service Pack 2.
Software comments: I would like to convert the Boot Camp XP Pro SP2 in a VMware virtual machine.        Running VMs with Kubuntu and NetBSD since the hd internal.

You can just get rid of the all/Users/lincoln/Library/Application Support / directory / Machines/virtual VMware Fusion; It should all be recreated. The virtual machine to help naos is than the pretreatment of Boot Camp. You don't want to get rid of all the of them, the only one in the specified directory. For example, there is a blank template in Applications/VMware Fusion.app whence that of your home folder.