Photo gallery error cannot open the gallery or difficulty

Similar Questions

• Error: Cannot open the file: 1

  [INFO]              Parsing of the command line options
  [INFO]              Bbwp.properties analysis
  [INFO]              Validation of archive WebWorks
  [INFO]              The analysis of config.xml
  [INFO]              The application of filling source
  [INFO]              Compiling applications WebWorks
  [INFO]              Packaging of the record bar
  Error: Cannot open the file: 1

  Once I rebooted my machine it worked... But I dint knew why this error occurred

• Error: Cannot open the disk: Test.vmdk

  Hi all

  I'm having a problem with the ovftool.

  Here's what I did.

  (1)I have created a virtual machine running CentOS.

  2)these are the 3 files I had.

  Test.vmx

  Test.VMDK (file descriptor)

  # Disk DescriptorFile

  version = 1

  CID = 5046e880

  parentCID = ffffffff

  createType = "vmfsPreallocated."

  
  

  # Description of the measure

  RW 83886080 VMFS 'Test - flat hard' 0

  
  

  # The database disk

  #DDB

  
  

  ddb.virtualHWVersion = "4".

  DDB. Geometry.Cylinders = "83220.

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "63".

  ddb.adapterType = "free".

  Test - flat hard

  (3) this is the command I ran

  OVFTool 'Test.vmx' 'Test_New.ova '.

  (4) it is the error I got.
  2012-09 - 05T 12: 24:57.817 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] is the initialization of the libs

  2012-09 - 05T 12: 24:57.817 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] the determination of source

  2012-09 - 05T 12: 24:57.818 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] the determination of targets

  Source VMX opening: Test.vmx

  2012-09 - 05T 12: 24:57.821 + 05:30 [verbose 7F22134FE740 "Default"] could not open the disk:./Test-1-0.vmdk

  2012-09 - 05T 12: 24:57.821 + 05:30 [7F22134FE740 verbose "Default"] Exception: cannot open the drive:. / Test-1 - 0.vmdk. Reason: The specified file is not a virtual disk

  Error: Cannot open the disc: Test-1 - 0.vmdk

  Help, please!

  Thank you

  createType = "vmfsPreallocated."

  is not an options valid here - have you set yourself?

  Try
  createType = "vmfs".

• ERROR: Cannot open the data source for the user

  Hello, I followed the instructions in the URL below
  
  http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
  
  and I get the ERROR: cannot open the data source for the user
  
  I run the sql for the role but nothing
  
  any ideas please.
  
  Sun solaris operating system
  database version 9.2.0.7

  Previous question that you were:
  Where did you get the GoldenGate for Oracle 9i software?

• ORA-07391: sftopn: fopen error, cannot open the text file.

  Hello
  
  The last 3 days, we get the error in the alert below log.
  
  [ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [27091] [] [] [], [], []]
  ORA-27091: unable to queue I/O
  ORA-27072: IO file error
  
  I check as the same partners to it in metalink I found permission to check the directory solution. (DOC ID367619.1)
  I got permission from ORACLE_HOME\dbs $ to 777, but still m making the same mistake.
  
  also I try to recreate spfile so that I try to create pfile first
  
  create pfile from spfile
  
  I get the error below.
  
  ORA-07391: sftopn: fopen error, cannot open the text file.
  
  ls - lrt sp * in the below output shows $ORACLE_HOME
  
  -rwxrwxrwx 1 ora10g 3584 20 September dba10 05:42 < SID > spfile .ora
  
  Help, please.
  
  Thanks in advance

  user8757749 wrote:
  The output of ls - lrt is in the path $ORACLE_HOME\dbs only

  We also have the database version 10.2.0.4 that the spfile even uses everyday cold backup of the database.

  also, I put the 777 permission to the file.

  OK, I guess there will be corruption of the SPFILE as if edited manually or in any other cases too.

  You have a backup of SPFILE? backup of the file PFILE or?

  then starting using this SPFILE, if any backup then start with PFILE and then create SPFILE from PFILE.

  Otherwise, you can copy the contnets of the parameters of the alert log file initialization and paste in the editor and the instance of starutp.

  These are the options.

• Microsoft office outlook error: "cannot open the outlook window.

  Outlook office 7 will not open this am.  It worked yesterday.  The message is simply that it "cannot open the outlook window.

  Try;

  Start > run... outlook.exe /resetnavpane (NB the space between exe /)

• CHKDSK error: cannot open the volume for direct access.

  CHKDSK is on the machine does not work it gives me the error:

  
  Cannot open volume for direct access.
  Autochk cannot run because of an error caused by a recently installed software.
  Use the system restore feature in the control panel to restore the system to a point prior to the installation of the new software package.
  An unspecified error has occurred (766f6c756d652e63 3f1)
  
  
  
  When I run it.

  I also tried a boot following the instructions of clean boot in Microsoft (through the http://support.microsoft.com/kb/331796 URL) and then try to run a CHKDSK command-line command (cmd) prompt in an administrator account and it always gives me error 766f6c756d652e63 3f1

  I also have the CD of Windows 7 available and administrator of the computer. I don't know how to get it to make CHKDSK work correctly at startup
  Thank you

  Hello Mitcherator777,

  You can connect to your computer in normal mode or only in safe mode?

  It would be the best way to run the Chkdsk command:

  1 disable any security software before you attempt to upgrade or do a clean install.
  2. make sure that your computer is updated (devices and applications)
  3. disconnect all external devices before installing.
  4. check your hard disk for errors:
  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: chkdsk /f /r
  When you restart your system, your computer will be scanned for errors and will try to correct them.

  Let us know the status of your question.

  Thank you

  Marilyn

  Marilyn,

  This problem has been resolved, I contacted Microsoft directly on the phone in the time of September.
  Question has proved to be a dirty disc. as my 1 year limited manufacturer expired warranty, I have since last week bought a new HDD to solve this problem.
  Please examine this issue.
  Thank you.

• Trying to fix a CID parent access to a file descriptor of delta but VM still does not start. Other error "cannot open the disk...". The specified file is not a virtual disk.

  Starting the virtual machine has been tried several times earlier when I received the error message to tell the parent disk had been changed since the child was created. I looked at the resolution and had a go at fixing.

  I downloaded the vmdk files to find the problematic descriptor file it corrected and then download the a back fixed to the data store. I then removed the VM of the inventory and then re he added before attempting to start it. He says now the specified file is not a virtual disk. Unfortunately, I didn't know that he was still working on a snapshot file and had been for some time. It was a former VM test that I had played a little bit with all learning on VMware, but unfortunately he had a few files on it which is no longer, I have backup ups for and I could really do with recovery of them! The base file and delta file are always on display in the data store and I can re - use the base file in a new virtual machine but I need the data from the snapshot if possible file. Not sure if it can be manually engaged at the base (I have a copy of). I'm new to this depth of troubleshooting and according to research I realize it is a great chance, the data is not recoverable. Having said that if there is no hope at all then I would try or at least have someone who knows what they're doing a go help before you tell me everything is lost! I'm not really bothered to get the virtual machine running again, but must be able to copy some files in the C drive.

  Any help much appreciated.

  Thank you

  Craig

  I can't tell you if the data in the virtual drive itself can be retrieved by the attached hard file. However, it seems that you have used an editor who added a BOM (Byte-Order-Mark) at the beginning of the file, which made her an invalid for ESXi.

  André

• Error: "cannot open the file 'E:\NSP2010\NSP2010drive2.vmdk': one of the disks in this virtual machine is already in use by a virtual machine or a snapshot."

  Hello community.

  I use my guest for a while; whenever I needed to reboot the host, I would shut down the comments (in this case Win2008R2).

  The last time that I suspended the guest rather than stop it. Now when I try to start, I get this error.

  I've seen people having this error on the forums, but proposed solutions don't resolve my problem.

  I don't know what I have to join in order to diagnose this problem, but it will be a pleasure to do, if someone does.

  VMWare Workstation 8.0.2

  Host: Win 7 64

  Comments: Win 2008 R2

  Thank you very much.

  run inject them - headers2.cmd once you have copied the 2 files descin in place

• Cannot open the file Windows XP Proffesional.vmdk

  I can not power

  on cuz VM of this error, cannot open the file path ' ' Wnidows XP Professional.vmdk, the system does not give especified. Someone knows how to fix this? Help me pls.

  From what I have read it could be a corrupt vmdk file, so I'll share my for you guys.

  None of the binary scopes, "Windows XP Professional - s001.vmdk ' via ' Windows XP Professional - s305.vmdk", lack or size of 0 bytes?

• ORA-00313: cannot open the online newspaper

  Hi all!!!

  Help, please

  % sqldba startup

  SQL * DBA: Version 6.0.33.1.1 - Production sea Jul 11 15:40:37 2013

  Copyright (c) Oracle Corporation, 1979, 1989.  All rights reserved.

  RDBMS ORACLE v6.0.33.1.1, option - Production of transactional processing

  ORACLE instance started.

  Mounted database.

  ORA-00313: cannot open the online journal "/ u1/oradata/orac/log2orac.dbf" (log # 2, log)

  ORA-00320: cannot read the log file header

  ORA-07362: sfifi: error, cannot open the file open.

  UNIX System V 386/486: 13 error: permission denied

  Attempt to disassemble the database... The database is dismounted.

  Attempt to stop instance... ORACLE instance stops.

  SQL * DBA complete.

  %

  Idea?

  987301 wrote:

  Hi all!!!

  Help, please

  % sqldba startup

  SQL * DBA: Version 6.0.33.1.1 - Production sea Jul 11 15:40:37 2013

  Copyright (c) Oracle Corporation, 1979, 1989.  All rights reserved.

  RDBMS ORACLE v6.0.33.1.1, option - Production of transactional processing

  ORACLE instance started.

  Mounted database.

  ORA-00313: cannot open the online journal "/ u1/oradata/orac/log2orac.dbf" (log # 2, log)

  ORA-00320: cannot read the log file header

  ORA-07362: sfifi: error, cannot open the file open.

  UNIX System V 386/486: 13 error: permission denied

  Attempt to disassemble the database... The database is dismounted.

  Attempt to stop instance... ORACLE instance stops.

  SQL * DBA complete.

  %

  Idea?

  ANCIENT Oracle (V6)?

  the file u1/oradata/orac/log2orac.dbf' actually exist?

  When the last time Oracle began you it without error.

  What has happened since?

• Error 1402 etup cannot open the registry key

  Original title: how to fix this? Error 1402.

  Error 1402. Setup cannot open the HKEY_LOCAL_MACHINE Explorer\Main\FeatureControle\FEATURE_RESTICT_ACTIVEXINSTALL registry key.

  Problem is now solved, all I had to do was to give me permission to Board on the FEATURE_RESTICT_ACTIVEXINSTALL folder in the registry.

  Thank you

• Could not open computer management. I m, like__MMC error message cannot open the file C:\WINDOWS\system32\compmgmt.msc

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  I am the administrator total privileage still i'm getting the following error...

  MMC cannot open the file C:\WINDOWS\system32\compmgmt.msc

  It is perhaps because the file does not exist, is not an MMC console, or was created by a later version of MMC. Perhaps it is also because you don't have sufficient access to the file.

  Hey Sandy_Nepal

  read the answer below

  http://www.Winhelponline.com/articles/72/1/error-message-when-you-try-to-open-a-MMC-console.html

  http://www.allpostnews.co.UK/II27/compmgmt%20msc%20error%20messag.php

  Walter, the time zone traveller

• I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  I can't open microsoft office outlook. It says cannot open the outlook window. I tried to run "outlook.exe/resetnavpane, but it shows and error msg 'make sure you typed the name correctly and then try again.

  There is a SPACE between 'exe' and ' / '. You didn't have that. That's why.

  Please copy and paste it in the search box ot Run box... outlook.exe /resetnavpane

  t-4-2

• Get the Error Message When you try to reinstall Vista: Windows cannot open the required file: E:\Sources\install.wim

  I'm trying to reinstall windows vista for the following reasons:

  1. I have SQL Server 2008 installed on my computer.  I deleted some files a long time ago and it screwed something and I couldn't reinstall.
  2. I had partitioned my hard drive for vista half and half SuSE and I deleted who and when I did, I think I deleted another partition - my recovery partition (E:\?).
  3. I need to clean my laptop.

  When I try to start the installation of a disk and I put in my product key, I get the following error:

  Windows cannot open the required file E:\Sources\install.wim.  The file does not exist.  Make suure all files required for installation are available, and restart the installation.  Error code: 0 x 80070002.

  Let me know if you have any ideas how I can fix it.  My next step was to recreate this E directory and download the install.wim file and re start the installation.  I could not find the file install.wim well.

  Rob

  Hi Rob,

  I checked the link you provided.  What you downloaded was just the Vista recovery environment.  You cannot actually re - install Vista with that and if you blew your recovery partition unfortunately you may be out of luck.  You blew your partition containing Vista runs so the SFC will be of no help either.  I wish I had better news for you, but I don't see any way o get on without a Vista DVD.  I have good news for you if.  When you get your HP drive if you have problems with the installation, we will be able to help you with that.

  Take care and let us know if you need assistance when the disc arrives. Locutys of Borg

  Resistance is futile

  If you don't succeed the first time skydiving probably isn't for you!