Error: "cannot open the file 'E:\NSP2010\NSP2010drive2.vmdk': one of the disks in this virtual machine is already in use by a virtual machine or a snapshot."
Hello community.
I use my guest for a while; whenever I needed to reboot the host, I would shut down the comments (in this case Win2008R2).
The last time that I suspended the guest rather than stop it. Now when I try to start, I get this error.
I've seen people having this error on the forums, but proposed solutions don't resolve my problem.
I don't know what I have to join in order to diagnose this problem, but it will be a pleasure to do, if someone does.
VMWare Workstation 8.0.2
Host: Win 7 64
Comments: Win 2008 R2
Thank you very much.
run inject them - headers2.cmd once you have copied the 2 files descin in place
Tags: VMware
Similar Questions
-
Error: Cannot open the disk: Test.vmdk
Hi all
I'm having a problem with the ovftool.
Here's what I did.
(1)I have created a virtual machine running CentOS.
2)these are the 3 files I had.
Test.vmx
Test.VMDK (file descriptor)
# Disk DescriptorFile
version = 1
CID = 5046e880
parentCID = ffffffff
createType = "vmfsPreallocated."
# Description of the measure
RW 83886080 VMFS 'Test - flat hard' 0
# The database disk
#DDB
ddb.virtualHWVersion = "4".
DDB. Geometry.Cylinders = "83220.
DDB. Geometry.Heads = "16".
DDB. Geometry.sectors = "63".
ddb.adapterType = "free".
Test - flat hard
(3) this is the command I ran
OVFTool 'Test.vmx' 'Test_New.ova '.
(4) it is the error I got.2012-09 - 05T 12: 24:57.817 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] is the initialization of the libs2012-09 - 05T 12: 24:57.817 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] the determination of source2012-09 - 05T 12: 24:57.818 + 05:30 [verbose 7F22134FE740 "Default"] [ovfTool.cpp] the determination of targetsSource VMX opening: Test.vmx2012-09 - 05T 12: 24:57.821 + 05:30 [verbose 7F22134FE740 "Default"] could not open the disk:./Test-1-0.vmdk2012-09 - 05T 12: 24:57.821 + 05:30 [7F22134FE740 verbose "Default"] Exception: cannot open the drive:. / Test-1 - 0.vmdk. Reason: The specified file is not a virtual diskError: Cannot open the disc: Test-1 - 0.vmdkHelp, please!
Thank you
createType = "vmfsPreallocated."
is not an options valid here - have you set yourself?
Try
createType = "vmfs". -
Starting the virtual machine has been tried several times earlier when I received the error message to tell the parent disk had been changed since the child was created. I looked at the resolution and had a go at fixing.
I downloaded the vmdk files to find the problematic descriptor file it corrected and then download the a back fixed to the data store. I then removed the VM of the inventory and then re he added before attempting to start it. He says now the specified file is not a virtual disk. Unfortunately, I didn't know that he was still working on a snapshot file and had been for some time. It was a former VM test that I had played a little bit with all learning on VMware, but unfortunately he had a few files on it which is no longer, I have backup ups for and I could really do with recovery of them! The base file and delta file are always on display in the data store and I can re - use the base file in a new virtual machine but I need the data from the snapshot if possible file. Not sure if it can be manually engaged at the base (I have a copy of). I'm new to this depth of troubleshooting and according to research I realize it is a great chance, the data is not recoverable. Having said that if there is no hope at all then I would try or at least have someone who knows what they're doing a go help before you tell me everything is lost! I'm not really bothered to get the virtual machine running again, but must be able to copy some files in the C drive.
Any help much appreciated.
Thank you
Craig
I can't tell you if the data in the virtual drive itself can be retrieved by the attached hard file. However, it seems that you have used an editor who added a BOM (Byte-Order-Mark) at the beginning of the file, which made her an invalid for ESXi.
André
-
Error: Cannot open the file: 1
[INFO] Parsing of the command line options
[INFO] Bbwp.properties analysis
[INFO] Validation of archive WebWorks
[INFO] The analysis of config.xml
[INFO] The application of filling source
[INFO] Compiling applications WebWorks
[INFO] Packaging of the record bar
Error: Cannot open the file: 1Once I rebooted my machine it worked... But I dint knew why this error occurred
-
ORA-07391: sftopn: fopen error, cannot open the text file.
Hello
The last 3 days, we get the error in the alert below log.
[ORA-00600: internal error code, arguments: [kmgs_parameter_update_timeout_1], [27091] [] [] [], [], []]
ORA-27091: unable to queue I/O
ORA-27072: IO file error
I check as the same partners to it in metalink I found permission to check the directory solution. (DOC ID367619.1)
I got permission from ORACLE_HOME\dbs $ to 777, but still m making the same mistake.
also I try to recreate spfile so that I try to create pfile first
create pfile from spfile
I get the error below.
ORA-07391: sftopn: fopen error, cannot open the text file.
ls - lrt sp * in the below output shows $ORACLE_HOME
-rwxrwxrwx 1 ora10g 3584 20 September dba10 05:42 < SID > spfile .ora
Help, please.
Thanks in advanceuser8757749 wrote:
The output of ls - lrt is in the path $ORACLE_HOME\dbs onlyWe also have the database version 10.2.0.4 that the spfile even uses everyday cold backup of the database.
also, I put the 777 permission to the file.
OK, I guess there will be corruption of the SPFILE as if edited manually or in any other cases too.
You have a backup of SPFILE? backup of the file PFILE or?
then starting using this SPFILE, if any backup then start with PFILE and then create SPFILE from PFILE.
Otherwise, you can copy the contnets of the parameters of the alert log file initialization and paste in the editor and the instance of starutp.
These are the options.
-
I downloaded "Lightroom_5_LS11_mac_5_7.dmg" for Mac that allows to update my Lightroom 5.6 (build 974614), but when I try to open it I get the error message "Lightroom_5_LS11_mac_5_7.dmg cannot open the disk image is not recognized. I am running Yosemite OS 10.10 on a Macbook Pro (retina, 13 inches, end 2012 with 2.9 GHz Intel Core i7 processor).
Vk2mh looks that the download was not complete or corrupt. When you download the update from? Have you tried to download it again?
-
ERROR: Cannot open the data source for the user
Hello, I followed the instructions in the URL below
http://gavinsoorma.com/2010/02/GoldenGate-installation-Oracle-11g-on-Red-Hat-Linux/
and I get the ERROR: cannot open the data source for the user
I run the sql for the role but nothing
any ideas please.
Sun solaris operating system
database version 9.2.0.7Previous question that you were:
Where did you get the GoldenGate for Oracle 9i software? -
Microsoft office outlook error: "cannot open the outlook window.
Outlook office 7 will not open this am. It worked yesterday. The message is simply that it "cannot open the outlook window.
Try;
Start > run... outlook.exe /resetnavpane (NB the space between exe /)
-
Could not open the file of muse: 3125 error cannot open database file
Muse crashed on me a couple of times last night, I went ahead and installed the new update. Now, I can't open my files of muse and I get the error message "cannot open this file in the Adobe Muse site. Error #3125: could not open the database file. »
Is it because I've updated? I can open some files in muse, but not those that I really need to work on.
Hello
Take a look at this thread: http://forums.adobe.com/message/5041864#5041864
See you soon
Parikshit -
Cannot open the disk could not be locked the file
Error when you try to share a drive between two virtual machines. I have two web servers VM and a disk shared data, each web server has 20 GB for operating system disks, and they share a 500 GB drive for data. I use clustered OCFS2 file system later.
See the 500 GB drive, but when we turn on the two VM the second throws the following error:
"An error was received from the ESX host turning on VM Myweb1.
Cannot open disk ' / vmfs/volumes/MyWeb1/MWeb1.vmdk' or one of the snapshot disks it depends on.
Cannot lock the file.
I've read about this error before but can't find where and understand that it's either because I don't set them up right to start with, or that there is some extra config I can do in the s flat *.vmx file?
Here's what we did when creating virtual machines and a shared disk, is there something missing
Create 2 new virtual machines for Web servers with disks of 40GB of basis for the operating system and then add a new hard drive to one of the virtual machines in vSphere BUT must be correctly configured for sharing between multiple virtual machines.
For example, to change the settings > Add > hard drive > create a new virtual disk > choose size and choose 'Thick eager disposition to zero' > under 'Virtual Device Node' choose a "SCSI (1:0)" then finish.
Once the drive has been zero there would stay out in 'Change settings' > click new controller SCSI 1 and choose virtual disks 'Physical' can be shared between virtual machines on any server.
Change the settings of the 2nd virtual machine and choose Add hard drive, choose existing, navigate to which you have created the VM 1 drive, make sure you assign it the same SCSI (1:0).
Thanks a lot a lot a lot for any help in advance
Did you also step on 2 VM below
After the disc has been zero go back outside to 'Change settings' > click new controller SCSI 1 and choose virtual disks 'Physical' can be shared between virtual machines on any server.
-
CHKDSK error: cannot open the volume for direct access.
CHKDSK is on the machine does not work it gives me the error:
Cannot open volume for direct access.
Autochk cannot run because of an error caused by a recently installed software.
Use the system restore feature in the control panel to restore the system to a point prior to the installation of the new software package.
An unspecified error has occurred (766f6c756d652e63 3f1)
When I run it.I also tried a boot following the instructions of clean boot in Microsoft (through the http://support.microsoft.com/kb/331796 URL) and then try to run a CHKDSK command-line command (cmd) prompt in an administrator account and it always gives me error 766f6c756d652e63 3f1
I also have the CD of Windows 7 available and administrator of the computer. I don't know how to get it to make CHKDSK work correctly at startupThank youHello Mitcherator777,
You can connect to your computer in normal mode or only in safe mode?
It would be the best way to run the Chkdsk command:
1 disable any security software before you attempt to upgrade or do a clean install.
2. make sure that your computer is updated (devices and applications)
3. disconnect all external devices before installing.
4. check your hard disk for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.Let us know the status of your question.
Thank you
Marilyn
Marilyn,
This problem has been resolved, I contacted Microsoft directly on the phone in the time of September.Question has proved to be a dirty disc. as my 1 year limited manufacturer expired warranty, I have since last week bought a new HDD to solve this problem.Please examine this issue.Thank you. -
Cannot open the folder of IMAGES on SONY NWZ - E383 Walkman using Windows Explorer.
I loaded several songs, videos and photos on the Walkman NWZ-E383.
The PICTURES folder has become inaccessible to Windows Explorer (cannot open to add or remove photos).
Any ideas?
Joffrey:
I tried your suggestion, but I am still unable to access the folder IMAGES using Windows Explorer.
The progress bar green in Windows Explorer at the top never quite reaches the right side.
MUSIC and VIDEO files work fine.
I even tried pressing the RESET button at the back of the Walkman, without success.
What other ideas can you suggest?
Thank you.
Clay
-
Cannot open the SAP IDES by virtual machine.
Dear all,
A year back I install SAP in my laptop, since then it was working well. But now, I'm trying again access SAP through the Virtual Machine then its display errors.
And after that its not opening only up to 12%, then no other process happens for a long time as shown in the image.
According to after a few second error below shows the picture above.
Then I clicked on OK, as shown above the screen and there still another error is popping up as a below error. That's why I'm unable to access SAP.
Your solution will help me very much.
Waiting for your response.
Thanks in advance
Kind regards
Kamlesh
Thanks for your reply.
Now the problem is solved. I had deleted the files & files ending with nvvs something like that, now I don't me to remember so I deleted the same & try again so problem solved.
Kind regards
Kamlesh.
-
cannot resize the disk on a virtual machine
Hello!
I have a little problem, I can not resize the size of the disk on some of my virtual machines.
I tried yesterday on two and worked well, tried to day (different vm) and it does not work so well for me.
I first stop the virtual machine, rightklick, change the size to 20 GB, 4 GB and press OK.
When I then rightklick on the virtual machine after pushing OK the size is always 4 GB (I don't mean in VI client for Windows).
Why? workaround solution?
Thnx for help.
VM there snapshots?
---
VMware vExpert 2009
-
Photo gallery error cannot open the gallery or difficulty
That the title no way to open vista windows Photo gallery
To see if a fix is available
In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.
You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.
Maybe you are looking for
-
Schedule e-mail alerts are sent to the wrong email address
When I create an event in the calendar, and then select a custom alert I chose a 'send e-mail' and select an e-mail address and a time so he could send the alert. Which works very well. The problem is when I get the e-mail, the e-mail address alert '
-
use IMAQdx functions in Labview Communications System Design Suite
Hello I would like to read an image and use the bytes obtained to perform certain functions. Currently, the system has Labview Communications System Design Suite (2014 SP1) and vision acquisition software installed. I don't know how to use IMAQdx fea
-
I had xp on my computer, I bought a WIN 7 take ownership with a product key sealed in the box. make a backup with windows easy transfer to external hard drive. When I enter the product key I get the message: the product key is valid. Help, please
-
Plan of the student/Professor
Hi, I tried to buy a plan for student/teacher, but to the last step (5) I tried to pay, and the system simply refresh the page and it is not a mistake or a notification. I tried with 2 different browsers, but is the same. What can I do?
-
Examples of applications for DRM 11.1.2.3
HelloI installed 11.1.2.3 DRM in my laptop... How to install the sample applications in DRM...