Photos of more saturated than Library Web and develop.

Similar Questions

• Gel of Lightroom to switch between library mode and developing.

  I installed the trial version of Lightroom.

  Imported photos and Lightroom freeze all the time when I go to library

  and patterns of development...

  What could cause the problem?

  Is it possible to debug this problem?

  Thank you

  Vyacheslav

  http://Vyacheslav.photo

  Try to diasable the GPU.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.

• Photoshop colors are more saturated than the recorded files

  I use Photoshop CC 2015 free trial on Windows 10.  I edit my pictures, how I wish, but when I save and view them without photoshop, the colors have changed: they are less saturated and more yellow.  When I bring them in photoshop on that color back how I initially edited.  This was never a problem for me before - I usually use Photoshop 7.0, but even if it does not work at the moment.  Is this a problem with how I save my files? Or a problem with the Windows Photo Viewer?

  Hello

  Well it is because of the difference in the color profile.

  You need to calibrate your machine.

  Also, here's how you can check.

  Open PS

  Click on Edit - > color settings

  

  Your other software can have the sRGB profile and photoshop can have ProPhotoRGB.

  You can try changing the color profile and you will see the difference

  ~ Jitendra

• Why my photos are different in the LR library modules and develop?

  I've seen a number of people ask questions on this issue, but I have not yet found a good explanation or solution. Color space for graphics processors and problems have been mentioned as potential culprits.  My configuration is:

  (1) LR 6.0.

  (2) computer - computer Windows 7 Pro 64 bit without a graphics processor.  The graphics processor option is disabled in the preferences of LR.

  (3) monitor - Dell u2413.  It has been calibrated using i1 Display Pro to its native color which is a little bigger and AdobeRGB space.

  (4) photo files - files .orf, Olympus Raw Format (?), new and directly from an Olympus Em5 MII.

  I would like some suggestions on how to fix this (other than watching photos 1:1).  I'm not sure I want to spend a lot of time in LR optimization photos appearance if LR cannot yet see the photos in a coherent way.

  Hi again,

  Try to calibrate your monitor and use sRGB IE61966 - 2.1 as your monitor profile, and share the results with us.

  • Reference: http://www.lightroomqueen.com/articles-page/how-do-i-change-my-monitor-profile-to-check-wh ether-STI-corrupted /

  ~ Rohit

• Lightroom more slowly than Lr5 cc and struggling for simple cropping and Pan

  I wonder if there is something wrong here. I have a decent machine (2500 k overclocked to almost 5 GHz, GTX570, 8 GB ram, Lr, installed on a SSD).

  LR5 me served well for a long time, and despite its slowness to certain tasks, it is ok. On the other hand, CRD offers very little new features and a decrease in performance.

  I change some 20mp canon raw files and the task simple or cropping/rotation/Pan became a nightmare. It's slow and something seems to be very bad when I try to recrop a virtual copy of an image. At the top very slowly, moving the clipping rectangle sometimes guard reset its position and "refuses" to stay in the place I put it to.

  When I zoom and pan on library mode, everything is going well, he gets only bad on developer mode. If I zoom 1:1 and have some adjustments with the brush of spotting, it feels like I'm panoramic a gigantic file on a 20 year old computer. Even in a clean image with no adjustment, developer mode fight bad pan with zoom.

  
  

  My catalog has around 40 000 files, but it should not matter when a single photo developing. Once again, the same catalog was LR5 and had many questions.

  Checked the use of computing resources, and nothing is really forced to the limit. Total memory usage never exceeds 5 GB (about 8 GB) and the CPU usage does not raise above 40%. If believes that CCRB does not have good use of the computing power available.

  Just replying to me here, I tried to disable this option in preferences > Performance to use my graphics processor and the performance boosted immediately. It is now at the same level as the Lr5.

  I use the version of 350.12 (later like today) of the Nvidia with a GTX570 driver. Apparently, there is a problem on the way that CCRB uses my video card. I hope that this problem is corrected, but at least now my LRcc is usable.

• OBIEE on 64-bit Windows 7?  Why it is more difficult than Cognos, Qlikview and table?

  Hi - Can you if you please clarify this in detail... I have some questions while 11 g OBIEE installation on windows 7, 64-bit version...
  Can you please provide instructions step-by-step with screenshots (if possible) set. I tried all the available sites... but still the problems and it consumes a lot of time...
  I downloaded...
  Version for Java-> and the path of the folder is c:\java
  Java version "1.7.0_10".
  Java (TM) SE Runtime Environment (build 1.7.0_10 - b18)
  Java for 64-bit Server VM (build 23, 6 - b04, mixed mode)
  -> You can please keep us posted of Environment Variables that we support on Windows 7 computers. All variables Temp, Java and other records that were needed.
  
  WebLogic Version downloaded on OTN:_
  wls1035_generic
  Path of the temporary folder_
  c:\Temp.
  Version OBIEE downloaded:_
  bi_windows_x86_111160_64_disk1_1of2-> basically version 11.1.1.1.1.6.0 for Windows 64-bit.
  
  Steps followed:
  I installed the ofm_rcu_win_11.1.1.6 .0_disk1_1of1-> basically the 64-bit version.
  Then
  Installed the loopback adapter:_
  -> In the hosts file, I haven't had one line added (the rest of the file is commented).
  10.10.10.10 ComputerName-> where ComputerName is the name of the computer.
  _ Installed and configured the OBIEE
  Installation very well with errors and I did the Installation of the software (the last option)...
  While Cofiguring, it's blocked upward at the first step... Domain configuration... Tried to 10000000 times... and when checked the log file showing the message below...
  
  [2011-07 - 01 T 12: 00:23.500 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3 ^ OytODwWWFLzrI8A1E3LWh00000F, 0] listening port of the found nodes Properties Manager: null
  [2011-07 - 01 T 12: 00:23.500 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3 ^ OytODwWWFLzrI8A1E3LWh00000F, 0] Impossible to reuse management nodes - port is null
  [2011-07 - 01 T 12: 00:23.500 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3 ^ OytODwWWFLzrI8A1E3LWh00000F, 0] no reusable node Manager found.
  [2011-07 - 01 T 12: 00:23.500 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3 ^ OytODwWWFLzrI8A1E3LWh00000F, 0] configuration manager for the completed initial node.
  [2011-07 - 01 T 12: 00:23.500 + 05:30] [as] [NOTIFICATION] [] [oracle.as.install.bi] [tid: 24] [ecid: 0000J3 ^ OytODwWWFLzrI8A1E3LWh00000F, 0] trust Port: 9556 to: NODE_MANAGER_PORT
  I had already installed Cognos, table and QlikView... it is far that took a lot of time, even to download the files, the installation and configuration...
  Please let me know your thoughts... Thank you very much for your time... Please do not consult your different websites or blogs to follow installation... like I already followed more of them, I found after searching on Google... and some of them don't even point to the exact versions they were downloading...

  Hi guys - Am finally able to install OBIEE11g...
  Under the link were the prerequisites to make 100% sure for installing windows 7 64 bit.
  http://OracleBI.blog.com/OBIEE-11-1-1-6-installation/
  To come to the questions that I did...
  For the Installation of Enterprise Edition (Option 2 in the GUI Setup screen) *.
  (1.) I had "jdk1.7.0_10" installed in the folder "C:\Java".
  Which tent to install OBIEE 11.1 it install weblogic version '10.3.5' because it is not compatible with "jdk1.7.0_10" had questions.
  To install only software *.
  1.), I had to download and install "wls1036_generic.jar" from OTN.
  You must make sure that install you it by following the steps below, but not just by double clicking on it... because it's a kind of 32-bit Setup by double clicking (yaa this is odd) even if you expect a 64-bit.
  a.) open the command prompt
  (b) go to the folder where 'java-jar wls1036_generic.jar' has been installed
  (c.) and then run 'java-jar wls1036_generic.jar ".
  Other issues *.
  1.) turn off the Windows Firewall during Installation.
  2.) uninstall Antivirus
  Not sure about the credibility of the two points above, fell on some sites I'm tired of trying all options and at some point... I turned off them and never their return on...
  Source *: various Web sites on the basis of different errors and mix for the Info, try different options to resolve an error/problem.
  Hope it will be useful to someone... I still say that Installation is not as simple as other BI tools on the market.

• TIFF files created in Silver Efex Pro and split toned in Lightroom 6.1 look more saturated in the view 'fit to screen' in the development in the library module module. It is to be fixed?

  Everyone knows this?

  I'm have not used Silver Efex pro, but understand now you're working with B & W images are weakening in LR. What you are likely to see is not a tint or color difference, but a "lighter" image It appears as less color saturation, since the image is monotonous.

  As Gene McCullagh mentioned this is due to the differences in library modules and develop an overview of rendering the preview to view fewer images of 1:1. If a high ISO image is sharper and has asked insufficient Luminance Noise reduction may seem brighter and less strong in the library less than 1:1 view module (i.e. Fit). Fortunately, there's an easy solution, as explained here:

  Re: Develop module & library module are not matching

  If it is not 'fix' the issue, then you can have an incompatible monitor profile (ICC Version 4 or LUT type):

  Re: Develop module & library module are not matching

• BW Images in lightroom CC different 2015 between library and develop modules

  Hello

  I have a strange problem with black and white images with different gamma between library and develop the module.

  Here is a screenshot of the library:

  

  And develop:

  

  As you can see, very black blacks lost completely all the details in the develop module.

  Anyone have an idea why?

  With sincere friendships.

  Olivier

  When Library and Develop appear differently, it is always due to a broken monitor profile.

  Test title, set monitor to sRGB profile in your computer's operating system.

  See http://www.lightroomqueen.com/articles-page/how-do-i-change-my-monitor-profile-to-check-wh ether-STI-corrupted /

  If this solves the problem, calibrate your monitor with a standard material. (which is something you should do anyway)

• Once I updated to Firefox 11, I can't open the pdf files. It's more the computer, snow leopard and lion and more than one Web site.

  I've updated to Firefox 11 and now I can't open the PDFs Online. This has happened on more than 1 computer, using the two OS 10.6.8 and OS 7.0 and on more than one Web site. I tried to uncheck "block pop-up windows" in preferences, but which did not help.
  When I use Safari to open the same file to pdf, they open fine. Everything worked fine with my Firefox until I did the upgrade.

  I prefer to continue to use Firefox, but I can't understand the root of the problem.

  Has anyone else had this happen as well?

  Thank you, gentlemen, to find a "solution" to this particular behavior of Firefox. It is really curious that even if the screen is blank, you can indeed save the .pdf Ghost and then open the saved file to view. What is amazing to me is that this issue does not seem to be what makes the hit parade of the problems currently experienced Mozilla. Not everyone will be willing to do a research project extended rather than leave the ship for Safari, etc..

• After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  After migration, iPhoto again takes massive space on the hard drive? My system is showing iphoto and photos with more than 100 GB of space each. I once picture is merged uses always massive GB of space? Thank you.

  # Multimedia files are hardlinked.

  (141516)

• Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Updated 2011 MacBook Pro at El Capitan 10.11.4. At the opening of the Photos, he entered into mode 'Library Preparation', but was stuck at 50% complete for more than 30 minutes. What should I do?

  Give it time - it may take a few hours depending on the size of your library is

  LN

• Is it possible to find a list of what iTunes songs not found on my PC? I have a library of more than 4000 songs and do not want to have to try all of them.

  I found by trial and error that iTunes has lost track of some of my songs. I suspect that it might be more, but do not know how to find out other than by "trial and error".

  You can use one of the following methods to delete broken links.

  Lost & found playlists

  Create a playlist named found, select everything in the music and the drag in the playlist found . Create a smart playlist called Lost corresponding to all the rulesthat playlist is music and Playlist not found. Your lost tracks will be in this playlist. They can be deleted with Ctrl + A, and then shift + delete.

  Or use iTunes folder Watch and enable the option to check titles dead at startup.

  If the media files exist somewhere so I can help you to reconnect the media mentions.

  TT2

• Equium L40 - internet does not work if I open more than one Web site

  I have an Equium L40-10 X, and while the system works well, he doesn't like the internet. If I open more than one Web site, a little box comes up saying that Internet Explorer has experienced a problem and must be restarted. It becomes excruciatingly embarrassing if I'm in the middle of something important and I lose the site I've been on!

  Especially with me, go to college soon too! Especially it will refuse to work if I have to download something, for example, I recently bought an Apple iPod Nano and I needed iTunes in order for me to put music on it, but once he starts the download, the "internet has stopped working" appears and I have to start everything again, but instead of her work - quite simply, there is no!

  This often becomes a case and it makes me incredibly stressed!
  Help, please.

  Hello

  Always use the OS from windows update?
  These errors occur if the registry is dirty and drunks was not updated!

  Update windows on Microsoft for the last State page!
  In addition, you must clean the registry using the freeware tool called CCleaner. It s nice!

  So finally a hint;
  You can access the internet with Microsoft Internet Explorer and with another internet browser like Firefox for example.

  I recommend you this possibility.

  concerning

• cluster with images: memory increases up to more than 2 GB and crashes

  I have a lot of PNG images (around 1200, 12 MB in size) and I load by programming in labview with a loop for I put all the image data in a table for all images.

  I can't complete this operation, while the images are very small memory LV is increasing more than 2 GB and then I get a memory error output.

  I put one "structure" above all table operations. What is going on? IM really a bad thing, I guess.

  Hi, Faust,.

  "On the qualities of the picture, they are 32-bit and x 850 360 pixels BUT about 99% is transparant (images has a constant size which is transparant, there is a small object that moves in this space)."

  Transparency is not relevant in terms of memory occupation. When the image loads, it just needs 850 * 360 * 4 bytes (or ~1.2 MB)...

  Suggestion:

  -Do not store images in memory... Do the math in slices of (say) 100 photos.

  -Do some manipulation of the image to get the position of the moving object. Then you store only a small portion of the image (with the object) and some information about the location in the picture. In this way, you always know the size of the (original) photo, but you only keep the "interesting" part in memory!

• Media Player shows more music than the music library

  original title: why are there more music in my media player in my music library?  And, how can I copy files from Windows Media Player music library?

  Using a Dell Inspiron with Win7 Pro.  Win Media Player Version 12.0.7601.17514.

  There are approximately 30 GB of music in the player, but less than 8 GB in the library.

  Hello

  Method 1.

  To resolve this problem, delete the Windows Media Player database. To do this, follow these steps:

  Click Start, click run, type %userprofile%\Local Settings\Application Data\Microsoft\Media Player, and then click OK.

  Alternatively, you can also follow this step:

  Click Start, all programs->Accessories->run, type %LOCALAPPDATA%\Microsoft\Media Player, and then click OK.

  3. Select all the files in the folder, and then click delete on the file menu.

  Note You don't have to remove the folders that are in this folder.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  Method 2.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  1. exit Windows Media Player.

  2. click on Start, click run, type %userprofile%\Local Settings\Application Data\Microsoftand then click OK.

  Alternatively, you can also try this step, click Start, all programs->Accessories->Run, type %LOCALAPPDATA%\Microsoftand then click OK.

  3. Select the Media Player folder, and then click delete on the file menu.

  4. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

  I hope this helps.