OBIEE on 64-bit Windows 7?  Why it is more difficult than Cognos, Qlikview and table?

Similar Questions

• obiee on 64-bit windows setup error 8

  Hi people,

  I have a question instailling obiee 11 on 64-bit windows 8

  ERROR: this version of the Oracle Fusion Middleware Business Intelligence 11 g game requires a 32-bit Microsoft windows.

  Please download the appropriate installed your operating system or contact the Oracle Support.

  I downloaded 32-bit and 64-bit of the site and always get the same message.

  Thank you...

  I managed to install it by using the oracle instead of the file setup.exe installer

  Thank you

• Rescue and recovery under 64 bit creates a 32-bit Windows 7, why?

  Hello. I have an x 201 with W7 Pro (64-bit) OEM Lenovo. I replaced the hard so I use Rescue and Recovery to have a clean install of W7 and the X 201 good pilots.

  What I did to run enhanced backup and restore and then via Advanced Rescue and Recovery, I launched the option "create rescue media. I followed the instructions and created a rescue media USB that as far as I understand leaves my X 201 as it was when it left the factory.

  I booted from the USB without problems, restore the system and to my surprise it installed Windows 7 but 32-bit 64-bit not. And no drivers (no video, no network, no USB/PCI). I'm lost here. Why is installed 32-bit when all items generated under Windows 7 Pro (64 bit) and what about drivers? Why it has not installed drivers?

  Looking at Enchaced backup and restore in my original installation icon, he says "Lenovo Enchanced backup and restore (32-bit)", so I don't know if that creates only the 32 bit instead of 64-bit OS.

  I'll now factory recovery disc option allows to see if that solved the problem.

  At this point, I thought that icon factory recovery disc was the same as the use of "create rescue media", because the two pretend to leave the hard drive in the same way, it was when the laptop has left the factory.

  If someone could clarify the difference between the two: 'factory recovery disk'vs'create rescue media', and also why the last of them creates a 32-bit OS rather than the 64-bit what it was supposed to create

  I will report how it goes with the task of recovery factory disc that I use now.

  Hello

  Quite interresting situaiton and to be honest not usual.

  However, what should happen, once you have created a rescue media, it's that you should have on the end, a single bootable media, using which you can save, etc.

  However, this support of rescue should not contain any OS, it should be only a boneless bootable media. The operating system and the rest should be on a separate stand.

  In the case where you had the original x 64 Bit OS, then using the recovery CD (as you confirmed as) should have restored the system to the State, as you received it.

  I don't understand, why it needs to change the version of the OS to another, when you initially x64Bit.
  Maybe some background info would be useful.

  See you soon

• My system is a PC 64 bit (Windows 10) why so my Creative Cloud 32-bit?

  Is there a simple way to upgrade to 64-bit?

  Thanks for any help,

  Cyd

  the desktop application is 32-bit.

  major programs (ps, premierie pro, busy etc.) will install 64-bit.

• What is the difference between x 86 and x 64-bit windows?

  What is the difference between x 86 and x 64-bit windows?
  Why windows 8 is incompatible with the office that is capable of windows 7?
  
  Title: Original Windows 8.0 and 8.1

  The terms (x 86) 32-bit and 64-bit (x 64) refer to how a processor (also called a CPU), processes the information. The 64 bit version of Windows handles large amounts of RAM (RAM) more efficiently than a 32-bit system.

  You can try to install a 64-bit version of Windows 8 on a 32-bit version of Windows 7. You must use the 32-bit disc instead.

  Learn more about the upgrade:

  The upgrade from Windows 7 to Windows 8

  also:

  http://techingiteasy.WordPress.com/2013/02/14/how-to-migrate-from-32-bit-versions-of-Windows-to-Windows-8-64-bit/

• Leak memory running 32-bit application in 64-bit Windows 7

  I have an application that shows no signs of leaks memory (I am put on hold the berries of 10 MB and their queue to the file) under a 32-bit operating system standard.  Since then I tried to run in Windows 7 64 bit (as a 32-bit by using the 32-bit Labview runtime process) and incrementing memory noticed.

  Program takes 300 MB of memory.  If I've save 100 MB of data in a file, windows 7 64 bit will show it as 400 MB of memory (under windows on windows 32-bit)?  I don't think it would be, but you never know...

  Are there bugs in Labview 2010 regarding the queues of waiting and 64-bit windows?  I am tracking my use of the queue and is not increasing, so no real reason so that he can rise in the allocation of memory.

  I started turning off sections of code to track down it and found it to be a function call that I had left behind (somehow).

  Apology for a sparse description.  I found the problem and it was a creation that is hidden in a table in a loop every second or more (for example, rising constant memory), nothing to do with 64-bit related issues.  Problem has been solved!  Thank you all.

• Add seconds to the 64-bit Windows system tray clock

  I tried Tclock both TclockEx, and both do not run. Anyone
  How to add seconds (hh: mm: tt) on the clock in the status bar to 64-bit Windows 7?
  I tried "Troubleshoot compatibility" with TClock, and she was declared
  incompatible
  and non repairable. I did not try it with TclockEx.
  --
  Crash
   
  What goes online, stays online.
   

  Hello

  I'm sorry you thought together meant the seconds and you said to display.

  These links show the seconds remaining. Perhaps to increase the height of the taskbar.

  Windows7 like clock on the system in Vista & XP tray
  http://www.tothepc.com/archives/Windows7-like-clock-on-system-tray-in-Vista-XP/

  TClock: See the Date Look like Windows 7 & time in the system tray in Windows XP and Vista
  http://www.askvg.com/tclock-show-Windows-7-look-like-date-time-in-system-tray-in-Windows-XP-and-Vista/

  T - Clock of the Stoic Joker
  http://www.greggdeselms.com/tclock.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Can I dual boot 32-bit and 64-bit Windows 7, and if I can how?

  Since W7 recognizes that 3 GB of RAM (?) can I install 32-bit and 64-bit on the same computer (different HD) since
  the two discs are included. W7 won't allow me to because it doesn't give me an option of destination?

  Yes you can. Just make sure that you have appropriate for the two operating systems installed partitions. You can install before or after, is not serious. Cannot start the installation of Windows 7 64-bit Windows 7 32 bit, so if you install first, you must start from your 64-bit Windows 7 disk, click Custom during the installation options Setup and select the prepared hard disk or partition, and Windows 7 will take care of the rest. Once installation is complete, you will have the opportunity during your computer to select either the version to start. Please note that you can only have 1 license is activated, if you need to use both, you will need both counterparts separately, may not use the same key. However, you can evaluate both for 30 days to decide that it is appropriate to your needs. Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• can I download lightroom on my system 32-bit, windows 7.

  Please let know us if its possible to download Lightroom for 32-bit windows system 7, y at - it

  any available version and where can I download it.

  I'm sorry, there is no version 32 bit 6 of Lightroom.  It is compatible only on 64 bit comps.

• CS5 on 32-bit windows

  I intend to install CS5 on 32-bit Windows 7.

  But I know that After Effects and Premiere Pro are the two 64-bit only...

  So, when I install CS5 [the entire suite], what will happen to Premiero Pro and After Effects? It install the CS4 versions, or simply ignore them?

  It will install the CS4 versions if you install from the Production Premium or Master Collection.

• Windows media player is not properly intalled on version 9 and 11.

  Hello

  I kept getting this messge when I tried to access Windows media version 9 & 11 of the reader.

  "Windows media player is not installed correctly and must be reinstalled.

  Methods I've tried, but did not work as the same message came back upward.

  1. remove the version 11 thanks to add and remove programs

  2. run as administrator command prompt and use the following command

  c:\Windows>inf\unregmp2.exe /UpdateWMP

  Here's the messge copied from the log:

  [* WMC Logging started.  Logging level: '5'.  OS is NT.  OSVer is 5.1.2600.0.  Version of configuration 9.00.00.4503.]
  ERROR: WMC_CopyFile: 'C:\PROGRA~1\WINDOW~2\WMPNS.jar' source file is not found.  Error: "0 x 80070002.
  WMC_CopyFile: The file "C:\WINDOWS\system32\wmpns.dll" is more recent than the version to install.  No copy will be held.
  Current command line: ' / ' ApplyFormats.

  [* WMC Logging started.  Logging level: '5'.  OS is NT.  OSVer is 5.1.2600.0.  Version of configuration 9.00.00.4503.]
  Register the DLL: "C:\PROGRA~1\WINDOW~2\wmpband.dll."
  Registration of dll: succeeded to the file 'C:\PROGRA~1\WINDOW~2\wmpband.dll '.
  Current command line: ' / ShowWMP /SetShowState'.

  Help, please! I am running windows XP 32 bit SP3

  Hi yesmadam,

  Follow these methods.

  Method 1: Reregister the wmp.dll file.

  (a) log on as an administrator.

  (b) click Start, run type cmd , and then press ENTER.

  (c) at the command prompt, type regsvr32 wmp.dll, and enter.

  (d) restart the computer and check.

  Method 2: Uninstall and reinstall Windows Media Player. Follow these steps:

  (a) go to Start, Control Panel, Add and remove programs.

  (b) click on Add/Remove windows components.

  (c) scroll down and uncheck uninstall the windows media player .

  (d) restart the computer.

  step e) follow a), b).

  (f) scroll down and check the option windows media player re - install.

  (g) restart the computer.

  For reference:

  Windows Media Player stops responding after you install a third-party product that registers its own version of the Wmp.dll file

  http://support.Microsoft.com/kb/947541

• HP Mini Atom N2600 1104: why the OS 32-bit (Windows 7 Pro)?

  I just bought a HP Mini 1104 (Atom N2600 processor).  The architecture is 64-bit capable.  Why it comes with a 32-bit version of Windows 7?  I think that the 64 bit version of Windows 7 would be a more natural match.  Is there some extremely effective in disk space, speed, or power draw using the 32-bit version of Windows 7?

  Thank you

  -Ryan

  Hey, Ryan:

  A 64 bit OS requires more disk space and memory to run a 32 bit OS.  Not double, but more.

  Unless you have 64-bit programs, there is no advantage in having a 64 bit installed - OS, especially if the maximum memory you can install is only 2 GB.

  The processor is capable of 64-bit, but it does that of up to 2 GB of memory.

  On your laptop, you're better off sticking to an OS 32-bit for the aforementioned reasons.

  I even think that somewhere on this forum someone has tried to install W7 x 64 on their mini with the N2600 and he would not go because of an incompatible hardware error message.

  I don't get that because the processor is normally the only keeper there.

• Why (Preview Developer 64-bit windows) prevent Kaspersky 2012 to install internet security

  Why (Preview Developer 64-bit windows) prevent Kaspersky 2012 to install internet security...

  First of all, this forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Secondly, this is not the place to ask questions about WIndows 8 Developer Preview.

  Some likely forums are:
  http://social.msdn.Microsoft.com/forums/en-us/category/windowsapps
  http://social.msdn.Microsoft.com/forums/en-us/windowsdeveloperpreviewgeneral/threads
  http://social.msdn.Microsoft.com/forums/en-us/category/windowsdesktopdev

• My 32-bit Windows 7 computer is used to save to ext hdd daily, well... then it just yesterday stopped by himself... :( Someone knows why?

  Hello. My 32-bit Windows 7 computer is used to save to ext hdd daily, well... then it just yesterday stopped by himself... :(   Someone knows why?

  I have explored a bit, but could not find answers, but I managed, a few minutes before, FORTUNATELY, to allow my computer its 'pilot' automatically update, in the future... :)
  - But I couldn't see any solution to my problem... :(
  PS - There are 135 GB of free space on my 150 GB ext hdd, so its certainly not complete...

  Hello

  I'm glad that you were able to solve the problem. I suggest that you post the second query by creating a new thread. This allows to avoid confusion.

• OBIEE 11 Admintool runs only on 64-bit Windows

  Hello
  
  Ive installed OBIEE 11 on Windows 64-bit (Windows 2003 Server). All services (responses, wls console, em) run correctly with the exception of admintool and Catalog Manager. After being started that they don't show up at all (command line disappear after dry without error). Someone encountered this kind of bizarre behavior?
  Is it possible to install admintool on separate PC to change RPDs as if it was possible in 10g? Now, it seems to me that you need to install weblogic too...
  
  I appreciate any advice on the above issues.
  
  Marcin

  Just read and it seems you are right. This is absolutely WRONG! Oracle are really difficult with the new installer of shit 11g. Added to my list of complaints 11g:

  What's wrong with OBIEE 11 g