Office jet pro 8600 n911a: Office Jet Pro 8600 N911a - drivers do not display hp Web site

Similar Questions

• IE - 8 does not display the Web Page of hyperlinks with MS Office Publisher 2003

  I've created two different sites using MS-Office Publisher 2003, and they have published on the web.  They are: www.tsquarterhorses-indiana.com and www.thomassacres.com when read using the IE 7 browser fine.  All pages work and embedded hyperlinks are displayed.  I have a client who has recently upgraded to IE - 8.  When they started to get reports that the site did not work they called me.  I went on every site and checked with my IE 8 browser.  Of course, Web sites were there, but the hyperlinks and the meter did not work.  I did some research and found that IE - 8 is not compatible with Web sites created for older web browsers.  I read that you need turn on compatibility view.  I did and was able to bring the counter but not hyperlinks.  Should what program I use to create Web sites that will work 100%.

  Locate the Office Forums

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Office and would be better suited to the office community. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite Pro L100: USB2 drivers do not have compatibility with Win XP

  SAT Pro L100 - I loaded the USB 2 drivers received using a prolific USB to Serial Comm Port (Sunix - UTS1009B) a single port USB to serial port cable.

  In each instance of loading the drivers message appears "did not the Windows Logo test for compatibility with Win XP. If continue or stop, drivers do not work.

  Seems as if there is a problem loading the USB 2 drivers. need assistance?

  Expensive branded

  That s nothing unusual.
  Many 3rd party drivers have not been tested by Microsoft and the message appears so that the pilot didn't make the Windows logo test for compatibility with Win XP!

  But if you use a driver that was designed for Win XP, you just continue and finish the installation.

  So, don t worry not and follow these steps!

  Best regards

• To Word on MacBook Pro photo collage, photo is not displayed, but the cursor moves to the bottom of the page. Tried rebooting already

  I try to copy and paste a picture of Word on a MacBook Pro, but it does not show. The cursor moves to the right distance to the bottom of the page and by positioning the mouse on the space shows that it is there, just invisible. I tried to reboot twice.

  Thanks for any help!

  It is the forum Pages.

  Have you tried Microsoft Word for Mac forum?

  Peter

• Firefox browser will not move to the office. Other browsers have no problem on the same Web site. ??

  Browser hangs and will not move through or around the office. Using
  rt click disobeys. (sometimes it also locks).
  Other browsers are moving very well with
  Same or similar plugins

  Thank you

  Dale

  I had this problem with Firefox version 15 and found out it was because of the theme I had installed. As soon as I changed back to generic theme of firefox browser was able to move freely again. Some themes work very well but there are some that causes this problem of the browser do not move with left click the top title bar.

• Satellite Pro P300-1AY: Vista does not display computers XP network group

  On my show w Satellite Pro P300-1AY with Vista, my old XP computer is not always displayed in the list of working groups.
  On my old XP computer, I still see the new Vista computer

  Can you tell me why the Vista computer not always displays the XP computer in the network group?

  On the commputer of Vista, I traced a directory on the XP computer and it will connect even though the task force list does not show the XP computer under the list of networks

  Hello!

  Have you disabled the firewall on the XP computer?
  Maybe a 3rd party security software is blocking it.

  Check the registry and go to:
  HKEY_LOCAL_MACHINE es\lanmanserver\parameters
  In this case don't Scream no entry with the name of Hide.
  If you have such an entry, delete it.

  Good bye

• Compaq Pro 3000 MT no video not displayed after upgrade memory

  Hello world

  I have a HP Compaq Pro 3000 mt p/n: NV569UT #ABA, WIN 7 PRO 32-BIT.

  It came with 2 GB 2RX8 PC3-10600U-09-10-B0.

  We want to switch to WIN 7 PRO 64 BIT and add 2 GB.
  We checked hp newsletter and he says use AT024AA (HP 2 GB PC3-10600 (DDR3-1333) DIMM).

  We have memory, installed, turned on the pc, led lights green on pc, but no BIOS HP screen, no video, no beep codes, nothing.

  Tested the new memory in another pc (same model), same thing,

  Tested in another pc (different model), they work fine.

  Looked at more closely to the new memory and I noticed: 2 GB 1RX8 PC3-10600U-09-10-A0.

  (physically she has chips on ONE SIDE of the module only; while the original was on TWO SIDES)

  Updated the BIOS, tried: same question. Tried in different combinations: same question.

  All removed (HDD, DVD-ROM DRIVE of FRONT: same question)

  I use the component that HP said I should use, but it does not work.

  Does anyone have an idea?

  Update:

  We have sent to the module 2GB 2Rx8 and that fixed the issue.

• Satellite Pro L450D - 12 X will not DISPLAY

  Battery is charged and good. The power adapter is good.

  The machine will not DISPLAY. The screen remains black and no beep. The power, & battery LEDS are green. The cooling fan is heard for a short time after you press the power button.

  I removed the RAM & HDD but the machine will show still not any sign of life (expect short noise from the CPU fan)

  I tried the no battery, no power, hold the power button for 30 seconds without success tour.

  I guess that the motherboard is dead. Has anyone else had the same symptoms? or can anyone suggest a repair?

  > I guess that the motherboard is dead. Has anyone else had the same symptoms? or can anyone suggest a repair?

  Indeed, it looks like a serious hardware problem possibly motherboard or maybe the CPU what to say to solve this problem, you must replace the parts and it will be a costly affair if the guarantee is not valid.

• Scroll only works in particular Web site with MS 5000 wireless comfort Office

  I bought MS Office Wireless comfort 5000 and the scroll wheel works very well in many programs but when I visit my bank online the scroll wheel only works scroll down. No matter which way I scrolling only scrolls. I have to use the side scroll bar sites and mouse pointer to get the page up again. Called the rep and she said try a different mouse. So I tried a logitech wireless I had before sunset the office and it works fine on my site of banks. Why this office defines only scroll the mouse down on a particular Web site? No idea before I return it a purchase a logitech set?

  I also work with specific programs box filled and downloaded the latest driver just today.

  The site is not running in any browser is a stand alone I think javascript type of site, but what intrigues me is the logitech mouse works fine in the site and not by the MS 5000 mouse.

  Hello MS moderators.

  This issue clarified itself with the two latest updates for Vista and I'm happy to announce that the mouse now works correctly. In the excitement, I forgot to mention that when I got to the office as a whole, the mouse was working ok, it scrolls up and down like a champion. Something needs to happen with a Vista update just before the question because I think remember me that he updated and then I noticed the problem. I'll keep the office install now and make sure that when I noticed something like this again after an update using see and system restore if that works. I tried everything that was suggested but saw only one so that it appears as a simple solution, right?

  Donny

• MS Office 2010 Pro and my printer does not work,

  I just installed MS Office 2010 Pro and my printer does not work, I tried to print a test page for the printer, but that prints either, ask if I want to troubleshoot the printer and when I click on Yes, I get a message that there is a problem of ActiveX.  The printer will not print not any application, but it worked before installing office.
  All the apps work except in order to print it.
  I am running WinXPPro w/sp3.

  Jim K.

  Hello

  1. What is the exact error message?
  2. don't you make changes on the computer before the show?
  3. What is the brand and model of the printer?
  4. this problem occurs with all files that contain the Active X objects or specific file?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2:
  Try the steps in the link and check.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 3:
  

  This problem occurs if the security settings for the Local computer zone are configured to prevent the ActiveX content to run.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry : how to back up and restore the registry in Windows

  a. Click Start and run, type regedit.exe, and then click OK.

  b. expand the following registry subkey:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\0

  (c) in the right pane, right-click 1200 and then click on edit.

  d. in the value data box, type 0. Then, click OK.

  e. close the registry editor.

• OfficeJet Pro L7590 can print but not scan

  My printer (Officejet Pro L7590) can print and copy correctly, but the scan function - that has worked well at the same time - has just up and stop working, and my attempts to solve the problem simply go round.

  • When I try to scan using the button start scan on the printer, I get an error message saying 'no scan options '.
  • When I try to open the solution Center, it is said that he cannot run because the installation is not complete.
  • Uninstalling and reinstalling the software (latest version, which is three years, downloaded from the HP website) do not work. The software seems to go through the process of installation very well, but crashes on the stage finish ("product configuration"). Eventually it times out.
  • Once in this case, the installer downloads a supposed solution of the HP Web site. He told me that it is fixing the problem and asks me to restart the computer, saying it will continue after the restart. After I restart, the procedure does not continue, and the problem is not fixed - all the behaviors I describe above are still occurring.
  • Also downloaded one file with other solutions supposed to this question. They do not work. For the most part, they are variations on "run the setup software again", preceded by various other measures. However, when I do this, it re-not installing - it is a completely different window, and if I try to go back to the installation procedure, he refuses, telling me the software is already installed. (And yet when I try to open the solution Center, he always tells me it is not installed.)
  • Tonight is the third time I tried to troubleshoot it. On three occasions, I just gave up in frustration after a few variations of the cover above.
  • I'm this end =><= to="" going="" all="" office="" space="" on="" this="" printer="" and="" getting="" a="" new="" one="" based="" on="" the="" abhp="" principle="" -="">Anything But HP.

  I can't emphasize enough that it worked in the past and this basis still printing very well (with the exception of some strange problems with certain PDF files), but scanning has broken since my last round of hardware upgrades and refuses to be fixed.

  It's incredibly frustrating. Someone just make it work with minimal BS, as he has done before.

  I realize, this is a follow up very, very late, but apparently the problem has something to do with the 32-bit version of Windows 7 running. I recently installed the 64 bit version and now have no problem with any HP software.

  Well, except that sometimes he asked my permission to do an update then fails to actually download the update (I get the same "could not connect to content url" error message that many others reported here).

  Other than that, which is slightly annoying, but doesn't really affect what anyone, everything works fine now.

• Internal SSD 256Go - Macbook Pro end of 2013 - has not detected

  I bought the macbook pro 13 - end 2013 model Retina display early 2014. It was working fine until 2 days ago. Suddenly, "?" appears at startup (startup). I took the laptop to the authorized Center Apple in India where they mentioned it is a hard drive problem and must be replaced and provided a quote from 45000 + 3000(service charges) for replacement. This seems to be 45% of the actual costs for laptop (in what SSD - 256GB was also part of the total costs). I don't see that it's reasonable price because it is 45% of the cost of the laptop. It's very bad service from apple that I wasn't expecting and force me to buy a mobile best on the market to 45% of the cost of the laptop. Any hard disk cannot cost 45% of the overall costs of mobile.

  Please suggest alternative solutions to ensure the functioning of the laptop.

  Your service issue is not with Apple as such, but with the store you are dealing with.

  The only option I can suggest id to buy a third-party SSD and install it yourself.  The cost may be less than what you were quoted.

  http://store.mcetech.com/mm/merchant.MVC?Store_Code=MTOs & Screen = prod & Product_Cod e = 1TBPCIESSD-L13M14

  http://Store.mcetech.com/mm/Merchant.Mvc?Store_Code=MTOS & Screen = CTGY & Category_Co = PCIEFLASH

  http://eShop.MacSales.com/shop/SSD/OWC/MacBook-Pro-retina-display/2013-2014-2015

  Ciao.

• Mac Pro end of 2013 will not launch apps. most mouse clicks are delayed to the point of making it unusable.

  Hello community,

  I have a problem with my Mac Pro end 2013. I bought it in August of 2014. It has always seemed to be a little weird, but I attributed this to the usual first generation bugs and not-so-stellar OSXs from the end. When it was available, I installed the latest update of El Capitan, 10.11.5,, and it seemed that Apple had finally deceived. Since the update, I enjoyed the use of my MP as much as other Macs I've owned over the years (a Performa, G3, G4, G5, several iMac, MacBook, MacBook Pro and Mac Mini - 14 in all).

  Yes, computer on my MP was nearlly nirvana, that is, until a few days ago. It started when my mouse became very unresponsive and I just thought he needed a couple of new batteries. I put fresh packaging as engergizers in, but it did not help. The slider was slow and jerky, and sometimes it is completely frozen. I paired a new mouse, also with new batteries, the Member and experienced the same thing. Basically, the mouse was unusable. The slider control would come and go at random. I do not think that to restart faster, (which surprises me, because, in the past, I had to do quite often to operate properly). But I restart, and it seemed to clear up the problem at the moment. This strange mouse behavior happened at least a dozen times since the beginning, but generally, it did not last long and lightens without rebooting. I noticed that often happens during Time Machine backups are in progress, or when another CPU-intense activity is happening.

  Unfortunately, it seems that this problem of mouse was a harbinger of things to come. Today, I started the MP of his sleep and clicked on Mail. Nothing happened. It confused me and left me puzzled for a while. I clicked on my browser, Google Chrome, and even once, nothing happened. I thought I should go in my applications folder and try to launch Mail from there to see if that would work. All the time that I did, I got a message window that says: "Cannot open the application"Mail.app"because it may be damaged or incomplete." Immediately after you read this, another window message, just like this one open and said the same thing for Google Chrome - "Unable to open," etc. Icons for Mail and Google Chrome in the doc are now passed to the application icon generic Apple, (the white sheet with the 'A' in the lower corner). Each application I click on since waking from sleep today gives me the same result. Nothing opens the application icon in the dock or the original file in the applications folder. Another very strange thing, it's clicking on a file opens the file in the application it is native. Strange, Yes, but I was able to open Google Chrome, clicking on a saved URL, and I open TextEdit by clicking on a saved TextEdit document. But the application does not open by clicking on its icon. I thought it was very unusual.

  With this weird behavior also come a slowdown in response time of the mouse and keyboard. It is so slow that it makes the work on the machine, for all practical purposes, impossible. It takes 20 or 30 seconds to register a click. But, adding to the quirkiness of everything that happens, once an application is open, like TextEdit, the mouse and the app seem to work almost as if nothing was when working within the App on the other hand, the responses to the mouse by trying to use the finder or open a file from the desktop are very slow. A note on this: when I first the computer woke up today and ran into problems, I tried to open the applications folder and when it finally opened, there is no list of applications. In near-panic mode, I immediately tried the folder my documents to see if my personal files were intact, but no they had also disappeared, or so it appeared. I discovered later, having left the files open on my desk for an hour or two, that files showed later upward. It was a great relief. But the icons on several applications from the applications folder had changed to the generic Apple icon, for some reason any. I rebooted into Recovery Mode, but he wasn't able to do anything there except performing first aid on the hard drive, which showed everything be ok. I didn't restore from a backup at this stage. I had another option to try everything first. Re-boot after that nothing changed.

  The option I mentioned was to try Disk Warrior on it. I ran the latest version and rebuilt on the hard drive, checked the material, and all that makes the software, I forgot. It took about 45 minutes to run. The result was that it showed some things which have been corrected, probably 8 or 10 items, any rang critics. I said a short prayer and restarted. Nothing has changed. Everything that I described before was exactly the same.

  Exasperated, I came here to see if it was what I could glean conversations that could help me. I have not found something really substantial to help me solve the problem, unfortunately. What I found was that I'm certainly not the only person who has experienced problems of 2013 end MP of catastrophic proportions. It is obvious that there is a serious problem with this Mac.

  For those who have had smooth sailing with them, be very happy. If I was. The question came out of the blue. Yesterday, I would have been there with you praise. I hope your luck tends and you never have to experience this level of frustration with a product. I mention this because some seem to dismiss the issue as flukey. But I must say, in all honesty, anyone denying the MP has a problem either whistling through the graveyard or they are so pro-Mac that they are not prepared to allow even a small flaw in the Apple armor. They are good people, but they are in denial. I know how easy it is to refuse to acknowledge the existence of even a slight stain on the first brand hand. I have fought wars of Mac - PC at the time where we didn't know what a Mac - but almost every designer in the country. We labeled Mac users quietly the balls also odd, unconventional and offbeat. But we knew we had the best product. We knew that when the rubber meets the road, in particular regarding graphics, we would spank a PC each time. The years 90, and even the first part of the century was a time when serious computer users aligned on one side of the road or the other, Mac or PC. A lot of animosity arose between the two camps, especially on the side of the Mac, because we were the underdogs, rather despised by the majority. We felt the need constantly to get our message to the number overwhelming dominate the PC users. It follows a sort of tacit animosity. And it became a proposal for a war similar to many Mac users, myself included. For people who lived in that time and have subsequently become more and more immersed in all things Mac, the war is raging on. This is the meaning behind my description of those who are "so pro-Mac". Again, it is easy to understand why this mentality still exists. It was not easy for us guys good back in the day. But it is now time for rational people watch mentality 'til-death-us-part and face the facts, which also means recognition of all prejudice deeply seated, illogical. This member is not good. There is a real possibility that it could be much worse than not well. Time will tell.

  On the side of those who are unwilling to admit there are problems, of course, the argument will be, given all the members sold, he's going to be a dud or two, it's just human nature to be less - than perfect. I accept that. For my money, however, after having lived what I have with my Congressman and to hear the facts given on this site by several owners of the MP - and the absurdity of the incredible problems they have known - that any rational thinker must know at least the idea that means that we deal with a lot more here than the occasional, inevitable dud.

  The bottom line is, my problems are not isolated. It is clear that Apple has a product that fails to a very rare rhythm of the brand. Once again, I have owned for a decade of Mac, all shapes and sizes, but I've never had anything that happens to one of them that comes close to this type of failure. How disappointing it is to me, who has worn the coat for Apple products for nearly 30 years.

  I doubt if there is something that everyone in the team of technical advisors here at the Community Board of Apple can do to help me with this problem. I'm not somehow devaluing at your service for Mac users. I certainly welcome any help you can offer. I know you have helped countless others to find solutions to the problems. But it's a little different for you now with this model of MP. Your best efforts seem to be a bit anemic on this topic. And it's not your fault. Apple isn't talking, then you are here on an island of yours, grasp at straws to try to help. I congratulate you on that, but nothing I've read has shed significant light on this which seems to be a mess of real, first Apple class - currently without a viable solution.

  Yet once again, I welcome any suggestions and thank you in advance to address even. I will definitely check here in the coming days to see if he has the answers.

  In my view, the prudent thing for me to do now is to make an appointment at my nearest store from Apple, an hour and a half and let them begin to set. I'm not too optimistic about a full success to resolve the issue during the first visit, based on the experiences of other contributors. And I rejoice in water and the lift back repeatedly to do things, as seems to be the rule rather than the exception. But in this regard, fortunately, I'm retired and now do occasional projects at low pressure. It's great to not have the MP to put food on the table like I did for many years using my trusty ol ' G5. I don't know what I would if I still ran my business full-time and depends on this MP. Small businesses rely on their equipment to work. The major failures, such as this MP seems to display with regularity can quickly put a small company out of business. This failure is not a walk in the park for me, but I really feel for those who invested heavily and who depend on every day, only to have this mucking things up, i.e., when it is not in the repair shop.

  Finally, I write my thoughts here to express my disappointment in commiseration with other owners of MP end 2013. These are users who were as delighted as I when Apple eventually replaced the G5 with this elegant, state-of-the-art piece of equipment. Like many others, I jumped directly into the train without reservation, and I paid their price without any reluctance. Plunking down to $4 k for it, adding on 27 "display Apple and then having to buy an external drive now makes me a feel a bit embarrassed, at best and, at worst, as an easy mark. The result is, I wasn't expecting this new MP to throw myself into a sort of computer euphoria, I expected just to work as it was announced. The only thing I added on and I thank God, I did it, was AppleCare. Before this saga is over, Apple will probably want that I had refused it.

  I have not read all what you posted but I think a clean installation, even to an external and test simply install would probably tell a different story. I think you did an installation "backup" probably from a backup of TC. I also think that Legacy Applications from a backup OS x and third-party would be not beneficial. Try it, see what improves.

• I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me

  I use a mac pro 2x3GHz. I don't know what I did, but since a few days I was not able to play videos from web sites like youtube. Can you help me?

  Hello joebat,

  It seems that some of your plugins (Shockwave Flash 10.1 r102) might be buggy or obsolete. To check for updates, please visit the plugincheck page. If this does not resolve the problem, try to start Firefox with the disabled modules and see if it helps at all. If so, delete the Shockwave Flash plugin and maybe reinstall or uninstall Firefox and do a new clean install.
  If that is not yet solved the problem, try the following troubleshooting steps: http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  Thank you for your patience and please let me know how it goes.

• I found that someone in our office has visited inappropriate Web sites, I would like to print the search history to help identify the culprit.

  Someone in our office visited some sites VERY inappropriate, apparently for some time. I pulled from the history, but I can't seem to print, in order to compare it to the newspapers of staff and narrow down the list of possible staff.

  Try:

  • http://www.nirsoft.net/utils/mozilla_history_view.html - MozillaHistoryView: view a list of web sites visited in Firefox/Mozilla/Netscape browsers

  See also:

  • [835204/questions/835204]
  • [831700/questions/831700]