Photoshop CS6 clone tool does not

Similar Questions

• Stupid Photoshop. Clone tool does not. That means "could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)" means?

  Please help and bear with me, I can not know what you are talking about. Total newb

  Nice day!

  The Clone Stamp tool is intended to be used to paint the parts of an image on one image (the same or another).

  To do this, a sampling point must be set for Photoshop 'know' what piece to be used and which is done with the Clone tool from the selected buffer, alt-click on the space provided.

  Kind regards

  Pfaffenbichler

• CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  CS6 stamp tool does not work with action / record (record of the tool is activated) other tools works

  At the same time recording tool was not possible and if you install Adobe Scriptlistener plugin Adobe will disable the recording of the tool its never an option.

  I use and record the actions all the time and was looking forward to the registration tool when Adobe announced it.  But I found what they delivered was very limited because of the restrictions. I don't like that Adobe disables the registration on my machine tool.

  The amount of data that gets reorganized also seems to vary between machines.  I found that Action recorded on a fast machine are not usable on a slow machine.  Recorder fast machine too much data.

  You use this action on the documents must also have the same size and resolution as the document that you have saved the action on. Quite a restriction.

  You can also be foxed in 2014 CC sett here Photoshop CS6 - recording of the clone in an action tool works incorrect on replay.

• In Photoshop CS6 Hue Saturation does not work with forground/background jitter set to 100%, that no color change is found. Help

  In Photoshop CS6 Hue Saturation does not work with forground/background jitter set to 100%, that no color change is found. I've added a screen Shot the brush settings and a demonstration of what produced the brush.

  I also noticed that when I make a model of a single color, when I fill a selection with the pattern, I get a rainbow of different colors.

  I use a 64-bit version of Photoshop CS6 masters Collection

  I'm on a PC equipped with an Intel Core i7 1366 4 physical cores and 8 wires, 24 GB of DDR memory, A Crucial 512 GB SSD and a NVIDIA GTX 570 with 2 GB of memory.

  The size of the document is 2100 x 1500 pixels in only two layers of 300 PPI

  For the issuance of the brush, see apply a Tip in the dynamics of color and see if that makes a difference.

  more information

  Dynamic color in Photoshop CS6 "Julieanne Kost's Blog

  https://helpx.Adobe.com/Photoshop/using/adding-dynamic-elements-brushes.html

  With regard to the model, if your use Edit > model fill, make sure you have not verified Scripted Patterns

  (this parameter is also the Paint Bucket tool in photoshop cs6)

  more on scripted models

  https://tinytutorials.WordPress.com/2014/07/25/Photoshop-CS6-CC-scripted-patterns-fills/

  

• Photoshop CS5 move tool does not?

  Help, please. I use Photoshop CS5, and my move tool does not work. I don't know what to do. I do photo with a plug-in software, 'Album DS' albums, and for the last two months, everything worked perfectly. Then, all of a sudden, when I load pictures on a page of the album, with the move tool, I have more get the brands of culture around the photos to enlarge them, reduce or even move the photos. I tried to use the move without the software tool and it still does not work.

  Look at the options bar to the move tool - you turned off the option "view orders of transformation."

• Patch/heal/clone tools does not

  I got PS CC for a few weeks and now I'm running into a problem with the Patch, heal and clone tools.  When I started to use the program, the tools worked fine, but now they don't work at all.  For example, when I try to patch patch that I can select the area I want and I can move the mobile dashed to another area, but when I release the button nothing happens.  The selected area always has the same faults inside the moving dotted line.  This happens with all other tools.  I don't understand what happened.  I tried to reset the tool, but that did not help.  I use Windows 10.

  I am also having a problem with the RL does not.  I uninstalled and reinstalled, but it is still frozen and not responding do not.

  Can someone help me solve one or two of these issues.  I searched the web for several days without the chance or the other question.

  Thank you.

  There are different ways to access patterns.  An easy way is to use the paint bucket and set it to the model in the Options bar and use the drop down menu to display the loaded models.  Then click the small sprocket and discover other model games.  You can also define your own templates and load sets of models from places like Deviant Art

  

• Photoshop CS6 "save under" does not work - Please Help!

  Hello!

  I have a question, and I can't seem to find a lot of answers for her

  So I have Photoshop CS6, and I know how to use it, I was

  used for a while. Everything worked fine on my old laptop,

  but I encountered some problems on my new laptop.

  So I worked on a painting for hours, everything was well-oiled

  Once I'd had enough and will save my. PSD as one. JPEG

  For some reason when I click on "save under" nothing appears

  The usual pop-up window did not show upward, not even an error window pops - up program

  I am really confused and extremely frustrated

  I was clicking on the "Save as", but still nothing is happening, I tried to restart, and it did not help.

  My "Save" pictures normally, but the "save under" does not work. It is not grayed.

  My picture is RGB 8 bits, the size is 900 x 1200 and image resolution is 300

  I use Photoshop CS6 on my Lenovo Yoga 3 Pro 1370

  Someone please help! I was very frustrated by that.

  Try to reset the Photoshop preferences:

  Hold down the CTRL - Shift - Alt from the cold Photoshop start.  If you get the keys to the low enough - quickly and you have to be VERY fast - it prompts you to confirm the removal of your established preferences, which will lead to them all being the default value.

• Photoshop CS6 PDF files does not open in Adobe Acrobat

  Photoshop CS6. Windows 8

  I used Photoshop to create smaller PDF files. I've never had a problem with CS6 until last week. When I click on save to PDF dialog box "error" is displayed. However, when I try to open the new file in Adobe Acrobat reader, a dialog box says 'insufficient memory '. In addition, in my windows Explorer, the file appears as just a white box in the sidebar "Preview".

  What I'm not doing correctly all of a sudden? I've been sticking with the same preferences and save the settings since I started using Photoshop CS5.

  You have updated Acrobat / Adobe Reader recently? If so, this update may have introduced a compatibility problem in shared libraries across the world of the Adobe PDF. Either the update never passed by correctly and you now have a sloppy Acrobat. Do other sources open PDF files? If this isn't the case, it would be a strong suspicion that you may need to reinstall / repair Acrobat. It is also possible that you have probably enabled sandbox in Acrobat security preferences (or did an update) and so Acrobat refuses to open some files, if it is unable to determine their origins. One more thing that comes to mind: have you tried saving the file twice in a row under the same name? This kind of thing sometimes happens too fast (on SSD drives and others) and is not update Windows file security information in time (or your virus scanner cannot keep up) and the resulting file is useless. Crush them with the same file would then give the correct results.

  Mylenium

• When I open Photoshop CS6, the image does not appear in Photoshop. The image IS open, i.e. the name of the file is displayed on a tab and the image layers appear in the layer panel. What is going on?

  Photoshop and Bridge is open as usual. But when I open an image, the image does not show in the area of the image. The image filename is show in a tab and the spectacle of layers in the Panel layer. What is happening and how to fix this.

  I solved the problem. It was somehow connected to my using Microsoft

  photos of theme. I put Windows to use the basic theme and the problem

  went. Thanks for the suggestions.

  HA!

• The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  The red eye tool does not present as an option under the Clone Stamp tool.  How can I access it?

  What version of photoshop are you?

  The red eye tool should be in the same location as the healing brush and Patch tools.

  

• Quick selection tool does not work after last update Photoshop CC

  I've updated to the latest version of Photoshop CC, and the Quick Selection tool does not work. I am able to make a choice, and then when I try to make multiple selections, I receive the ball well filled, and then nothing is selected.

  I have preferences in the performance, the value Panel "Big & Flat" in the historical and 'Basic' Cache in the settings of the graphics processor. Thus, the operating system is up-to-date.

  I restarted my computer, and now it works. Don't know what it is, but it works fine now.

  Thank you!

• If I start Photoshop I get 3 error messages: 1. FastCore-Routinen-Modul 2. MMXCore-Routinen-Modul 3. Mehrprozessorunterstutzungs-Modul could not be loaded because the tool does not work with this version of Photoshop.

  FastCore-Routinen-Modul could not be loaded because the tools does not work with this version of Photoshop.

  The MMXCore Routinen module could not be loaded because the tool does not work with this version of Photoshop.

  The Mehrprozessorunterstutzungs module could not be loaded because the tool does not work with this version of Photoshop.

  Hi zimlo,

  Please check the below link which may help you:

  https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Sarika

• Photoshop Creative cloud blur tool does not work as it should

  Photoshop Creative cloud blur tool does not work as it should!

  I'm going to blur a painting that I do and he don't not blur and I use the Tablet wacom Intuos 5 Med.

  and I even put the sensitivty tablets for low pressure and then by default and still not get the blur tool to do its job.

  I even adjusted the brush settings too to be able to scramble even more on hard settings, still nothing.

  at least he bluring not enough to see major changes.

  the only way I can all that Fuzzy is using the filters blur or brushes (brush mixer) settings to mix colors and make this way.

  (note) I will not post my systems plug sorry I do not have it, and even technology from adobe says that I don't have to. and so I used!

  just need to advise of don't not to share the system specifications.

  and that is what this forum forums is for advice and read what others are saying about the issue.

  It is not to publish them or share the system specs!

  with the road so I don't need that advice please?

  Hello

  It could be that your picture is too large with respect to the dimensions in pixels for the well blur tool run.

  If you zoom in to 100% you see no change when you use the blur tool?

  What are the dimensions of the image in pixels?

  (Image > Image size)

  If you try a small image, the blur tool work?

  What happened when you use the mouse instead of your Tablet?

  Can you at least tell us what operating system and version of photoshop with your?

• Option-click for the clone stamp does not. I've tried several suggested fixes, no results. Help!

  Howdy!

  I searched and found similar questions on the forum and I tried all the solutions proposed, that I could find, but I'm still not resolve this issue. Hoping that maybe someone found a fix!

  The problem is that the option - click to set a point source for the Clone Stamp tool does not work, but the behavior seems to be particularly odd.

  With the Clone Stamp selected, tool if I press the option key pressed, I get the crosshairs target little, which makes me think that Photoshop is the option key is read and is not a recovery program of her clutter. When I then try to use the clone stamp, however, I get the dreaded error message:

  "Could not use the clone stamp because the area to clone has not been defined (option - click to set a point source)."

  I went through all the relevant troubleshooting steps, I could find elsewhere on the forum. I have updated to the latest version of Photoshop and my BONES. I tried to reset the tool. When this does not work, I reset the Photoshop preferences. I have disabled all the other programs that seemed that they might have some sort of overlay keyboard shortcut, but as mentioned, Photoshop DO change the cursor when I press the option key, which makes me think (although I am far from being an expect) is not the issue. I have no plugins or mods or anything of this nature that is installed. It is a completely vanilla installation.

  I am under Photoshop CC 2015.1.2 20160113.r.355 x 64.  My OS is El Capitan 10.11.2.

  Any help would be greatly appreciated. As far as I know, there is no work around. This tool is dead in the water for me until I can sort this out.

  Thank you!

  -Dom

  P.S. If this is quite in the wrong place to post a question like that, I'm sorry. I would like to know where I lead and I'll be on my way!

  I have to admit, I'm puzzled. Everything seems as it should. The tool has been reset, preferences reset and the layer looks very good. I wonder if it is a question with El Capitan. I use Windows, but know that Photoshop has had problems when El Capitan came out. If you have not used the clone 6 months stamp then it would have been pre - El Capitan. Have you tried completely uninstalling Photoshop, restart the computer and reinstall?

  I have not followed the El Capitan saga, you can read about it here

  Warning about Mac OS X 10.11 El Capitan

  As a last resort, you can try going back to Yosemite.

  Terri

• Clone Stamp does not work during the operation of frequency separation.

  Spacing of the frequencies for the first time by train.  I finished the layer of tone and now works on the texture, but the clone stamp does not work.  I have the linear light value layer and the stamp tool is set to 'active layer '.  The stamp tool is gray in the Middle, as if I were seeing a "high pass sharpening" layer through the center of it.  Tried to save the doc and the reopening, but none here.  Any other ideas?

  -Jeff

  In fact, I restarted Photoshop and it works properly now.  Thanks for the information on how to best to post a question.  I'll remember that next time!