WRT160N v1 slow wifi connection

Similar Questions

• Satellite C50-B16T - slow WiFi connection using battery power

  Hello

  I have a new Satellite C50-B16T and discovered that when I take it off the power, wifi is slowing down as HELL, to the point that I can't even use it and have to connect it to the power.

  I saw a few solutions on a TX adjustment, but my Satellite actually doesn't have this option, and if this is the case, I don't know how to find it and why it is happening.
  Would really appreciate if anyone has any suggestions, since my laptop is now essentially a desktop all the time, which makes its pretty useless goal...

  Go to-> WLan card device manager-> properties-> tab power management

  Here, uncheck the option that allows the system to disable or control the unit in order to save energy.

  Also check the tab 'Advanced' for possible energy saving options.

• WRT160N very slow wifi compare to wired

  Hey guys thanks for the help on this one.

  The answer could be as simple as: get a new router. but lets give it a try. I have read many many post about how to optimize the speed of the router, but none has worked so far.

  I had a large wired Internet connection that strikes between 45 and 60 MB/s

  http://www.Speedtest.net/result/2029093668.PNG

  wifi is crazy slow on Macbook pro, Iphone and iPad stay between 3 and 8 Mbps...

  I tried to change all of the specs, did the firmware update...

  is there a configuration perfect with the new firmware?

  Let me know because now, I am naïve and I can't find anything else on the web

  See you soon

  Jeff

  You try the following settings:

  # Open the browser and in the address bar type 192.168.1.1 which will open the gateway configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually located on your main configuration page / database routers). Here is the link to determine and implement the right size MTU: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...

  # Make that channel 1, 3, 6, 9, 11...

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2307 RTS threshold

  Then check the status of the connectivity.

• Launch and slow wifi connection on compact z5

  I had a compact z5 because my Z1 broke, and he is quite the disappointment.

  Its quite slow in use, opening the applications etc, the battery life is is worse than the Z1, but what about major nuisance for daily use; I had hoped it would be as fast as the Z1 when it was new, before that software upgrades make it really slow to...

  1: when you use the endurance, it takes a long time to connect to wifi after reactivation, 30 to 60 secons... The Z1 does not have the haves of this problem, it comes to connect very quickly.

  2: when you select Start, it takes about 20 seconds to display the available connections to throw to... The Z1 was perhaps a second and normally connected to the nearest automaticalliy still.

  Why this poor performance, is anyone else having the same trouble?
  And please don't tell me 'fix' the software, the phone is 3 weeks out of the box, it is not necessary to do... Looking forward to a solution to this, since I feel a bit stupid to have chosen the Sony phone still one time...

  @SorenLH

  That doesn't sound right, I have the Z5 and Z5 premium and they are fast, @alexdon do you experience lag on the compact Z5?

  you could boot on > safe mode to test this questions?

• the Airport extreme, giving a slow wifi connection

  Hello

  I've got my download speed of 200 Mbps cable company. I checked a good signal by plugging directly in he back of the Modem (to remove the photo Airport extreme wifi.) ... I have 221Mbps actually...

  However, once I'm going to plug in the Airport Extreme and text my speed on wifi, I get only between 24 Mbps or max after several trials of 54 Mbps on download... I should get just under 200 Mbit/s because of the normal fall through wifi... However, not to the extreme I loss I get...

  Tuesday Apple Support has helped me to perform a reboot of the router and I have been good to get 198Mbps... It is here 2 days later and I'm back down to 24 Mbps...

  I tried to redo the reboot: unplug the unit, hold down the reset button, then while holding down the reset button, add power on and continue now stuck until it flashes yellow... But curiously, after it flashes it goes straight to the green... (never asking me to airport utility to add a password)

  My Wifi speed stink...

  What continues with this device... anyone have recommendations?

  I already proved the cable line and the modem (with the support of motorola)...

  Thank you

  Most likely you have a faulty AirPort Extreme. Please ask Apple to replace this unit for you.

  If you wish to renew a reset, follow the instructions very carefully:

  Turning off AirPort Extreme

  Wait 7 - 8 seconds

  Hold the first reset button... and hold in an additional 7 to 8 seconds while simultaneously you reconnect the power on the AirPort Extreme.

  Release the reset button to zero after the period of detention

  Allow a minute for the AirPort Extreme restart. The light will be Orange fixed for 15-20 seconds about, then turn to flashing orange slowly after about 30 seconds

  A slow amber flashing light... about once per second... confirms that the airport has been reset and you can set it up again.

• Slow wifi connection

  Hello

  I recently bought a PC Hp Envy 17 j106sf and free wifi does not work properly.

  The speed of the wifi used to be more than 20 MB/s on my old computer and is currently the subject of 2 Mb/s. Ethernet works perfectly well. The wifi card is a Ralink RT3290 802. 11bgn Wi - Fi adapter.

  How can I fix my wifi?

  I would apreciate a quick help, solve this problem.

  Hello TristanA,

  Welcome to the HP Forums!

  I understand that the speed of the Internet connection on the computer is not as good as it should be. I will do my best to help! To start, try the procedure described in this document from HP: troubleshooting your wireless network and Internet access (Windows 8)

  These measures should be sufficient to solve the problem. If this isn't the case, you can try a manual reinstallation of the driver:

  1. go in Device Manager, then the network cards.

  2. right click on the wireless driver and select "Uninstall".

  3. restart the computer. This will force the driver to resettle.

  Please let me know the results of your troubleshooting. Thank you!

  Mario

• slow WiFi connection to iPad

  Hello

  I have the iPad 3. It works without problem, but some time (once in 3-4 months), I have a problem to open the Web browser. It is extremely slow. I use Safari. With the help of "speed test" I found that the download speed is ~ 25Mbps (same as on my iPhone) which is OK. But open google.com on iPad takes almost forever.

  It would be a question of Safari? He looks not at me router question being 25 Mbps decent speed. Should I try Chrome or I could clean / Reset Safari somehow?

  Thank you

  Update: I tried using Chrome but Google.com takes minutes anyway.

• Satellite Pro P300 - very slow WiFi connection

  Toshibe Satellite Pro P300 with built in the Atheros AR9281 wireless.

  Running Windows 7.

  ESET NOD32 Antivirus.

  BIOS 2.5

  All the latest versions of the drivers installed including the driver Atheros 8.0.0.225.0 wireless.

  Wireless is annoying...

  Sometimes fails to find the router (Belkin 54g, connected to the Modem cable Motorola (Virgin B/B is the access provider, 10 Mbps)).

  When he finds, connects ok, but sometimes it is impossible to browse web pages - just behave as if there is no connection.

  Bit torrent works also very slowly (in general 0.5Mbit / s depending on the number of peers etc.). Not a port forwarding issue with the router - using utorrent that indicates that the relevant port is open.

  When I connect to the router with an ethernet cable, everything works a treat - much faster and rock solid connection. uTorrent has no hit 10Mbit/s problem at all.

  Any suggestions?

  Thank you very much...

  Alan.

  Hello

  You should first check if your BIOS is up to date.
  If an older version of BIOS is installed then you could update the BIOS.

  It is also advisable to update the installed WLan driver.
  Here, you can check the available WLan drivers:
  http://APS2.toshiba-tro.de/WLAN/

  See you soon

• Slow WiFi

  I have a slow WiFi connection. I use a newer MacBookPro and have no ethernet to make a direct connection. I had a router to the South, but just before he went to the South, I was getting 220Mbps down speeds and I just got a new modem D-Link and he got setup one moment I'm stuck on 23Mbps. My other MacBook which is oldest to 125Mbps downwards. My desktop Mac mini becomes the same as my remarks 23Mbps Pro. If I connect directly the mini I get a compatible 220Mbps speed. I've been with comcast today and they don't see any problems with a direct link and 220Mbps, and my other book on wifi getting an Im 123Mbps sure that the issue isn't with comcast. I don't know what settings are now the speed down. I know that this is not the new router either because I have an old router which is at the same speed but the router that went towards the South allowed me to get the 220Mbps via wifi when it was working fine. The D-Link is new and seems to be ok. My other was a router Netgar N900. The D-Link is the AC-3150, a pretty radical router. The interface is a bit different, but it has the same information as the other routers.

  IM pretty good setting up networks, but this one has pulling me my hair out.

  I can't connect directly, otherwise I'd do it but why with a laptop. I also connected directly with my mini and who then shared and still only got 23Mbps speeds. My service is minimum 150Mbps downwards.

  Someone has an idea of what might be wrong. I reset and rebooted several times. My connection is DHCP but I did no changes using this or static. I checked the settings between the two laptops, and there is nothing else that I can see.

  I need help.

  Pete

  Fixed a problem. I have the new D-Link AC3150 Ultra WiFi router. It is supposed to be an intelligent router that gives you the best radio for the fastest speeds available. Maybe it's not so smart after all. I disabled the smart function and configuring a dual network. One for the other for 5G and 2.4 g. I put the 2.4 for older speeds and 5G for speed N/AC Protocol. After setting this up, I chose the 5G network and now my speeds are shouting along to 224Mbps and solid as a rock.

  Other than to be not so smart at least on a Mac platform I see no problem still with this router. I will pass along this information for D-Link. If you purchased one of these and your speed is way slower than expected then you need disable the smart function and have just two separate networks. Catch 5G as it is young, but don't forget that you only let the speed N or AC. Don't let not default on older slower speeds.

  Pete

• Satellite L50 - B has slow WiFi speed

  Hello

  I got this laptop last month but I'm really disappointed because it was a bloody slow wifi connection.

  I've already updated my wireless drivers, but nothing happens. The funny thing is I have an another old laptop, but it has a speed great wifi.

  I already try to do a speedtest of them both in the same place at the same time but my acer got 10-15mbps but my toshiba receives only 1-2 Mbps and it is very frustrating.

  I have a Qualcomm Atheros AR956x Wireless Network Adapter and I have read a few problems with this adapter. Please if someone who can help me with my problem.

  I'll sort to buy an external wifi adapter if necessary.

  Using some devices Bluetooth as part of this Satellite phone?
  Bluetooth is turned on? If so, turn the Bluetooth off and test the performance of the WiFi.

  I read in some discussions that the simultaneous use of WiFi and Bluetooth may affect the performance of the Wifi.

• Network WiFi connection is slow

  Original title: network programs network networking Internet Web site Site Web Web Site URL

  I'm not sure what happens, but don't trust that I have "piggybackers" making use of my WiFi internet got slow.  Last week, I used a public WiFi for the first time.  Looks like others are have to work outside my network.

  I clicked on the icon of the internet bar and I saw 3 or 4 other users currently logged on.  Whenever I have uncheck automatically connect to them on what they come immediately disconnect.

  I've lost my privacy!

  Hi Regina,.

  I suggest you to enable protection of password for your WIFI connection.

  Secure your wireless network.

  http://www.Microsoft.com/security/online-privacy/home-wireless.aspx

  You can also follow the steps in the link here.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-Internet-connection-so-slow

  You can contact your Internet service provider for assistance relating to password protection.

  Write to us if you are still having the problem. We will be happy to help you.

• iPhone 6, wifi connection

  I have an iPhone of 128 GB with iOS10 6. It has always been slow to the point of connection to routers or does not connect and a recent visit to the USA took out that frustration. I was trying in vain to search Hotel / b & routers b on my phone, so my Kindle and 6 s the iPhone to my wife by my phone would be in touch immediately with a strong signal. I tried to reset the network, as I did several times in the past year since I bought the phone, and which makes no difference whatsoever.

  I have also read and followed the advice on these talk pages, with no improvement.

  I put my phone next to my wife, my iPad device 2 and my Kindle, all connected to our relatively new Netgear router upstairs, and my phone usually has a weaker signal and is slower to connect.

  He is sitting on my desk that I type, the router being under the desk, and the signal is strong at 3 bars with no dropouts.

  I'm running out of ideas, and I think it's maybe a rogue phone.

  You must first check your Wi - Fi router: check if other devices can be connected. This will let you know if there is a problem with your Wi - Fi router. You can restart your router and restart the connection to WiFi.

  Make sure that Wi - Fi and you can see your network

  Go to settings on your iPhone > Wi - Fi and check if it is enabled. And if there is a blue check mark next to a network name means that your iPhone or iPad was connected to this network.

  Restart your iPhone/iPad, router, cable/DSL mode

  If this does not help, reset your network

  On your iPhone, iPad, got to settings > general > reset > reset network settings. This will reset Wi - Fi networks and passwords, cell parameters and VPN, and APN settings you used before.

  These measures should help.

• slow WiFi with 7.6.7

  I have the extreme of the airport which has been upgraded to 7.6.7.  Since upgrading my wifi connections are slow.  If the 2 devices are on the wifi at the same time the second device running very slowly.  This problem did not exist before the 7.6.7 upgrade.

  How can I fix this problem?

  Have you thought to go back to the previous version of the firmware as a possible solution? Or do you want to try it first to other things?

  Users discover that the firmware update will not fix a problem that they did not... but sometimes, it will create a new they had not before.

• C50D-A-133 satellite detect WIFI connection but cannot connect

  Hello world!

  I have a problem with the internet connection from my laptop.
  Earlier this week, I noticed that my internet is very slow.

  Now a few days later I can not connect with my wireless network more.

  My other laptop can still connect with the network, so I think that there is something wrong with the windows drivers 8.1?

  Because I've read some things other people who have had the same problem but I couldn't solve the problem.

  It's a toshiba Satellite C50D-A-133 with qualcomm atheros ar956x as an internet adapter

  Can someone help me with this problem?

  Kind regards
  Hannes Van den Berghe

  {quote} My other laptop can still connect with the network, so I think that there is something wrong with the windows drivers 8.1? {quote}

  According to your post, you were able to connect the laptop to the router WLan.
  In this case, the WiFi connection has been established correctly.

  I put t think there is a problem with the laptop s Wlan connection. Your WLan router is probably some problems and that is why I recommend to reset the router.

  In addition, you could test the LAN connection.
  In case you have a problem with the connection to the local network, the configuration of the router should be checked.

• WiFi connects immediately after starting

  Hello community,

  I started having Wifi issues after installation LittleSnitch. It would be irrelevant, but that's when the problem appeared. Although I have already removed, the Wifi connection does not seem to operate normally.

  Before that, it would connect immediately after starting, which means instant access to Chrome or any other browser.

  Now, he continues the search for a few seconds, shows an exclamation point on the wifi icon and then finally connects to my network. This process takes more than 30 seconds.

  I tried several solutions spare, change my location, manual settings, DHCP or DNS, wifi diagnostics, reset my router, but all without success. I still can't get it to connect at the same time.

  Any ideas?

  (El capitan)

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.