Photosmart 2575: cannot install software HP 2575

Similar Questions

• Cannot install software on vista.

  Cannot install software on vista.

  1st thing to do is to contact the manufacturer of the program.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  And check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on its Setup.exeo run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Store Windows cannot install software, error code: 0 x 80248014

  Store Windows cannot install software, error code: 0 x 80248014

  Original title: Windows Store

  Hello

  
  I suggest you rename the temporary folder C:\Windows\SoftwareDistribution:

  1. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net stop WuAuServ

  2. click on start, run, type: %windir%, and then press ENTER.
  3. in the opened folder, rename the folder C:\Windows\SoftwareDistribution to SDold.
  4. click on start, run, type: cmd and press ENTER. Run the following command in the opened window.

  net start WuAuServ

  Visit the Windows Update site to check this problem. If it works then it's a corrupted Windows Update file and we need to delete the folder in which it resides.

  Hope this helps, good luck :)

• Help! Cannot install software or drivers for 4500 JO! "MSI. Scan""Fatal Error"- (continued)

  I posted this problem once before to http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup-e-g-Windows-8/Help-Cannot-install-soft... and I thought that my problem was resolved, but it was not.  So, here I am again.

  With the 'solution' to the other thread, I was finally able to load the software for the printer on my computer, but then the computer is not grateful and in collaboration with the printer for some reason any.  I got the JO 4500 all-in-One machine to print with a generic driver to a different printer, but I couldn't use the other features like analysis.

  Now, when I plug in USB cable to the printer to the computer, nothing happens.  Other USB devices work fine, but the printer is not recognized as it should be for a reason any.  So, I installed the printer drivers and software, but now cannot complete the installation of the printer to work. What gives?

  All my pc info and the printer is given on the thread linked above.  I hope I can help with that.  This is ridiculous.

  This looks like a port that the computer connects to is turned off, which is very rare, or as the USB cable may be bad. Another possibility is that the USB port on the printer itself is turned off. To control the port on the computer just plug in another device to the port and see if the computer detects. It will very likely, because, as I said, it's very rare that a single port out. Normally, if we're all going. The next thing to try would be the cord USB itself. You can do this by plugging it into a different printer, or by getting a USB cord and try. If none of these things work, run the installation again, but this time, after connecting the printer, open the Device Manager to see how your computer handles the pilot. Make sure to click on view, then select Show hidden where the installation is being hidden. If the printer does not appear at all, then the USB port on the printer itself is probably bad and you will need to connect the printer to a router by an Ethernet cable in order to to use. If the printer appears in the Device Manager, but there are errors, this means that the computer is just to have a hard time to locate the drivers. If this is the case, let me know.

• 'Not a valid W32 application' blackBerry smartphones cannot install software

  I can download the software, but cannot install it. I get the message that the file 'is not a valid W32 application. Someone knows how can I fix?

  Problem solved. The file have not completely downloaded. Made 2 further attempts it downloaded completely and was able to install it successfully.

• Cannot install software — get the error code 1618

  I install software error code 1618 already running when I try to install software.  There is not any other system running.  However, when I look at taskmgr, I see 2 instances of msiexec running.  I was advised to cancel their but they restart immediately.  Any ideas?  Thank you.

  Hi Horselover,

  Thanks for posting in the Microsoft community! You have reached the right forum for your question.

  You did changes to the computer before the show?

  Method 1
  I suggest you to restart the computer, and then perform the clean boot and install the programs and see if that helps.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: Make sure that you reset the computer back to normal once the diagnosis is complete.

  Method 2
  I suggest you try the steps from the following link:

  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651#reso3

  Hope this information is helpful and let us know if you need more assistance. We will be happy to help.

• Cannot install software due to group policy

  original title: how to change group policy settings. I am not able to install the software because of group policy.

  I'm not able to install anything because of what they call the group policy. I don't know how it happened and do not know how to access the group policy to change. Any help would be great.

  "believerbac" wrote in message News: * e-mail address is removed from the privacy * .com...

  I'm not able to install anything because of what they call the group policy. I don't know how it happened and do not know how to access the group policy to change. Any help would be great.

  You are on a network to a company?  If so, you will need to contact your system administrator to get permission to install software on the computer.
   
  If a personal computer then try a system restore to a point before it started.

• Cannot install software web cam

  Win 7 Pro x 64 Serc Pak 1 more AMD Athlon II X 4 620 2.6 GHz

  Microsoft LifeCam 3000 installed 3 years ago. Worked well. Still works with Skype.

  The desktop icon disappeared and system research cannot find LifeCam.

  Devices and printers shows unity.

  Displays the Unit Manager.

  I removed the software existing and from the last driver from Microsoft Update (LifeCam3.60)

  This software is located in my folder of load down, but runs into an error when I try to install.

  I tried to follow the instructions at <> http://support.microsoft.com/kb/953691 >. Theses instructions are confusing and in full. In fact, one of the measures is completely absent.

  What can I do?

  Or is it just an another glitch caused by having rejected Win-10 last August and returned to Win - 7?

  Two things:

  (1) have you ever had another webcam of brand: https://support.microsoft.com/en-us/kb/929087

  (2) manually, download and install the driver: https://www.microsoft.com/hardware/en-us/d/lifecam-hd-3000

  J W Stuart: http://www.pagestart.com

• Cannot install software from unknown Publisher.

  I try to install a display of loop radar from NOAA website.  I get the error message

  "Windows has blocked this software because it cannot verify the Publisher".

  Name: code.

  Publisher: Unknown Publisher

  The site where the viewer link is http://radar.weather.gov/radar.php?rid=eax&product=N0R&overlay=11101111&loop=no

  Any suggestions on how to override to allow me to install this viewer of loop?

  Thanks in advance...

  Ed

  Hi Ed,

  You try to install the program by running it as administrator and check if that helps.

  1. to start the program as an administrator

  2. right click on the file to install the program

  3. Select run as administrator

  Now check if help.

  If this does not help, you can try to temporarily disable UAC (User Account Control), and then try to install the program and check if that helps.

  Follow the link given below to turn off UAC

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: Enable the UAC once the installation is complete.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install software completely

  recently, I reformatted my hard drive and installed windows 7 Home premium. I tried to install the software into my computer, but most of the programs cannot be completely installed. Software Adobe reader, Skype, PPStream, Windows Live etc... the installation process just ran at half way. My internet browsers is also became super slow although I tried fixing it by disabling the stories or measures that I could find on the internet. I also tried to restart and reinstall windows 7, but nothing seems to help...

  [Moved from comments]
  

  Hi susssify,

  The description of the problem, I'm sorry to hear that you can not install programs after formatting the hard drive. Do not worry, I will definitely help you with this problem.

  This happens usually if the Windows Installer is damaged. Thus, you should try to repair Windows Installer and check.

  I would like to know more information on the issue, so that we can help you better.

  -What is the exact error message / full when you try to install programs?

  -Is the problem confined with specific programs?

  To the question connects to the installation of the programs:

  Method 1:

  How to solve problems when you install or uninstall programs on a Windows computer

  http://support.Microsoft.com/kb/2438651/en-us

  Method 2: I also suggest that you run the Microsoft FIXIT from the link and if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/

  For the problem related to the performance of Windows 7:

  Method 3: I suggest you run the Microsoft FIXIT from the link and if it helps.

  Difficulty of Windows system performance slow computer problems

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 4: I also suggest you follow the steps to run the troubleshooter from the link and check if the problem persists.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  For reference:

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  If the issue is only with Internet Explorer:

  Method 5: I suggest you to run the Microsoft FIXIT and check if it helps.

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  Method 6: Any Mode of modules
  I suggest you run Internet Explorer mode no. Add-on and check if the problem persists. To run in the module No. mode follow the steps below:
  (a) click Startand type Internet Explorer in the box to start the search.
  (b) click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.
  (c) test Internet Explorer to verify that it works correctly.
  If the problem is not present in no add-on mode, you can check the specific module is conflicting evoking the links provided.
  You can also check out the link to get help on the question below.
  Internet Explorer Add-ons: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/Internet-Explorer-Add-ons-frequently-asked-questions

  I hope it helps. If you have problems in the future, please let us know. We will be happy to help you.

• Cannot install software CS5 Production Premium on OS 10.11.1

  My CS5 Production Premium software will not install on my new mac with OS El Capitan. When I try, I get this error "'Install' is corrupted and cannot be opened. You must eject the disk image. "Any ideas on how I could fix this? Thank you

  Hello

  Please try to download the installer from the link below:

  Download the CS5 products

  Kind regards

  Sheena

• Satellite Pro L300 - cannot install software for USB 3.0 Expresscard

  I try to install AKE USB 3.0 expresscard to a Toshiba L300 Pro running Windows 7. The laptop recognises the ExpressCard but the software does not correctly install if the unit will not operate.

  Tried the drivers NEC & fresco provided with the unit and also tried other drivers for AKE downloaded fron internet but still no joy.

  Has anyone ever loaded into the software for a USB3.0 expresscard successfully? The laptop will have USB 3.0?

  Any help would be appreciated.

  If the software doesn't install correctly, try to contact the manufacturer of the card and ask for help.

• Photosmart C410A: Cannot install the Driver

  OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
  Processor: AMD APU A8-3820 with graphics HD Radeon (TM), AMD64 family 18 model 1 Stepping 0
  Number of processors: 4
  RAM: Mb 5844
  Graphics card: AMD Radeon HD 6550D, 256 MB
  Hard disks: C: Total - Mo 940455, Free - Mo 855102; H: total - Mo 305234, Free - 170309 MB; Total I: - 7 MB, free - 0 MB;
  Motherboard: gateway, SX2370
  Antivirus: Norton Internet Security, updated and activated

  Apparently after a Windows Update, computer of my wife, which is connected to our printer via ethernet through our Linksys E3000 router connection, lost that connection. As the driver was out of date anyway, I downloaded just the updated driver and tried to install it after checking that all traces of the old version have been removed using the HP uninstaller program.

  Inummerable times today, tried to install the driver. I either get the the point where installation asks what kind of connection I have and when it shows via ethernet I get an error message about the MpsSvc (Windows 7 firewall) be stopped or the installation fails generate a message that says missing a setupfile. I tried to disable the firewall in Norton Internet Security and AV and the installation always fails. I tried to turn on the Windows Firewall, via the the Task Manager (with the NIS firewall off) nothing works.

  One of the solutions I found on this forum with an HP Expert was to use the complete package to install the driver. Even if I'm NOT all the programs that come with it (there is the possibility to choose what you wanted but not more) I tried. I still received the message to set firewall scenario and then had to uninstall all the programs I didn't want in the first place.

  There are two other computers in the House connected wireless to the printer and both work very well. I even tried the road wireless with this computer, nothing is done.

  I know I'm not the only one we encounter this problem as I saw other postings but I have yet to see a solution that works. I'm trying not to get both frustrated and angry but it must be an otherwise difficult problem to solve. Before the update Windows and update the driver of HP, this computer worked fine with this printer. There is a conflict between HP software and Windows 7. Please give me a solution that actually works.

  I finally found a relatively simple solution that worked. First of all, I unzipped the driver of a CD-based package. Then, I clicked on the Start button and open "devices and printers". Then I clcked on "add a printer".  I chose "add a network printer". As Windows did not have the selected HP C410a among the choices of the printer, I have disk driver and connected to the CD file. Windows finds the driver, installed and everything works as it should. Certainly, the icon of the printer is not the C410A but all the functionality of software works so I don't care.

  On my wife's computer, I followed the same procedure except that I chose the option "Local printer", as his office is connected to the router via an ethernet cable. For some reason, his computer also had the HP C410A among printers whose drivers available and Windows loading automatically good. Everything is fine with his computer in terms be able to print. Again, not the cool little icon C410A under "Devices and printers", but it works.

  The really good part of doing it this way is that I didn't have to install all the unwanted HP softerware which comes with the "complete package".

  I appreciate everyone's help.

• HP Photosmart B110: cannot install drivers, USB error message

  Hello! I'm stuck installing the software/drivers for my printer.

  I bought a new computer and everything worked fine until I tried to install the printer. I get this error message, and I can't move, so I can't use the printer

  This is a screenshot of the Setup error:

  

  It's strange and I don't think it's really a problem of USB, I have many more devices connected via USB and printer is the only one that gives problems. I also tried to plug it into all possible USB of my motherboard without result.

  I also downloaded the drivers up-to-date for my motherboard, I've even updated the BIOS to the latest version, without result.

  I can see the printer detected from the control panel of configuration/printers, but he said to the drivers installed.

  I'm out of ideas... I don't know what to do, please help >. <!

  Thank you!!

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• Satellite P200-140: cannot install software on Vista with the administrator account

  Hello

  just bought a new P200-140 Sat with windows vista at home, but I cannot load the software on the computer.

  I'm in administrator mode and when I am trying to load the software I get an error message saying "can only load software as an administrator of disconnection and reconnection as Administrator", but the problem is that I am the administrator.
  can anyone help

  Hello

  Are you sure that the admin account has been activated and you are connected with the admin rights 1005?

  I asked because the administrator in Vista OS account is disabled by default.
  Why? Well, it's an idea to Microsoft ;) and I think that the user must often work with limited rights.
  But if you want to enable this account you can do the following:

  -Right-click on the computer
  -manage
  -users and groups
  -double click on administrator
  -Remove the brand to deactivate account

  After this procedure you can connect to the Vista operating system as an administrator.

  I hope that these tips will help you.

  Good luck