Satellite P200-140: cannot install software on Vista with the administrator account

Similar Questions

• Cannot install software on vista.

  Cannot install software on vista.

  1st thing to do is to contact the manufacturer of the program.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  And check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on its Setup.exeo run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• Account of Vista standard user will not open programs that more, can only open with the administrator account

  Whenever I try to open a program on a standard user account, a window opens asking "what program you want to use to open this with?", which is of course less useless.  I can open all programs with the administrator account, but then I can't access files of the standard user...  What happened all of a sudden; We had a malware infection that is now deleted and who may well have caused the problem.  If I use the system restore, the malware will return?  Prefer not to use SR if there is a better solution...

  Hello

  Method 1: Run the fixit available in the link below

  Difficulty of the shortcuts of broken office with common system maintenance tasks http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2:  Follow the steps described in the article below and then check out

  When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the problem persists, the user account may be corrupted

  Method 3: Follow the steps mentioned in the link below to fix the corrupted user profile
  

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

• Satellite P200-140-CD/DVD drive does not read the CD

  Hi all

  I have a Satellite P200-140. The DVD/CD Player plays all DVDs without problem. However, it does not read CD. A message 'no disc' appears.
  I've updated the drivers, cleaned the lens, completed all the normal tasks.

  Any advise / solutions out there?

  Hello

  Maybe you should try to remove the capital letters and lowerfilters in the registry, because you can often read here in the forum:

  (1) run regedit (Start-Run-Regedit online online)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  I hope this works for you too! :)

  Good bye

• Satellite Pro U400 - cannot install VAP on Vista 64-bit

  Hello
  Since I bought 4GB of RAM for my Satellite Pro U400 PSU45E, I installed vista Business 64-bit, with all drivers and bios 64 bit found on the toshiba site.
  easy, with the exception of the "value added package 1.1.19", whenever I try to install I get: error "failure of GetProfString."

  I installed every driver and utility for 64-bit, but still the same...
  Everyone has experienced with this?

  Without VAP, I can't use the Toshiba power saver, worst profiles I can't go back because I did a new install and deleted the recovery partition!
  Please, someone help!

  Hello

  VAP contains all the modules necessary and you n t need to install other tools in order to install VAP
  I think that it s a Vista may issue you should do a clean install, then you must update the Vista for the last State.
  After have installed all the patches Vista, try to install VAP and other tools.

  Good bye

• Satellite A100-049: cannot install printer/scanner Vista

  I am running Vista and I can't install lexmark x 85. Lexmark say they will not patch their software because the printer is old. has a found a way to work?

  Hello

  Please don't be angry with me, but why you post this here in the Toshiba support forum?
  This has nothing to do with the Toshiba laptop.

  It s a clear case to me. You are not able to install this printer on Vista OS because the printer drivers are too old or not compatible with Vista.

  In the first step, you must contact the support of the manufacture of the printer and ask for the new version of the drivers for printer or compatible driver for Vista. Maybe you will find the drivers supported on the printer manufacture website

  Good luck

• Satellite Pro L300 - cannot install software for USB 3.0 Expresscard

  I try to install AKE USB 3.0 expresscard to a Toshiba L300 Pro running Windows 7. The laptop recognises the ExpressCard but the software does not correctly install if the unit will not operate.

  Tried the drivers NEC & fresco provided with the unit and also tried other drivers for AKE downloaded fron internet but still no joy.

  Has anyone ever loaded into the software for a USB3.0 expresscard successfully? The laptop will have USB 3.0?

  Any help would be appreciated.

  If the software doesn't install correctly, try to contact the manufacturer of the card and ask for help.

• Satellite Pro L300 - what I can reinstall Vista with the recovery disk?

  Hey

  I dual-boot (running Windows Vista & Win7) and if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  And I have another drive on my computer for recovery Partition so I can use my recovery CD to reinstall Windows vista if I want once I got rid of him and would it erase my win7 disk or remove the duel boot?

  My specs are:
  Intel Pentium
  2 GB OF RAM
  Hard drive 160 GB

  > if I delete Windows Vista can I reinstall Windows Vista with my recovery CD?
  You can use the recovery disk to reinstall Vista on your laptop but as Luke mentioned, the recovery disk would format the whole HARD drive. It would erase all partitions on the HARD drive and you will lose also the installed Win 7!

• How to connect to another user without password account, with the administrator account in Vista?

  My son will connect to FB, then goes to bed and does not sign off the coast. I log in and the machine is really slow. I am administrator in Windows Vista. Can I disconnect it without password?

  
  * original title - how I as an administrator can connect my son, another user of my computer. I can get her password, but is it a switch, so I can just cut him so my machine is not so slow? *

  Hello

  Unfortunately, we are unable to disconnect another user without password account.

  However, you can restart the computer that would disconnect the other accounts.

• Satellite M35X-S111: cannot install W2k and Vista

  Greetings! Today I tried to install windows 2000 on my computer laptop m35x-s111 but my attempts were not successful. After you have copied the original drivers, there was 'Blue screen' talk that it is necessary to disable the Bios shadow and the shadow of the video. These options are not present in the BIOS, it is generally whatever is not present adjustments.

  Today tried to install Windows Vista RC1, but lead to this screen and the message that this is full not ACPI (is not compatible). I understand it, it is necessary to disable all these options and then the system will be installed but how do?

  Hello

  Generally, Windows 2000 installation should not be a problem and it is not necessary to disable anything in the BIOS. The fact is that Satellite M35 is designed for Windows XP and I really don t know if the device is supported for W2000 but on WE download page (http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp) you will find several drivers.

  If possible please send us the error on blue screen code.

• Error 1500 another installation is in progress I can't install software on Vista SP2

  Original title: cannot install software on Vista SP2

  I can't install any software, on SP2With Vista questions such as:

  * configuration of the program just hangs without anything shown in the progress bar

  * error a 1500 another installation is in progress

  * have known for some time

  very slow (several hours) updates to the OS on the system shutdown

  Was able to install v2.0.4045.907 FixCleaner recommened (guess not use msi?) - fixed nothing

  Windows install 4.5.6002.18005

  msiexec /Unregister

  msiexec/regserver

  sfc/scannow not = no breach of integrity

  has run cleanboot selective startup without MS apps - same question

  without running the msiexec process

  No file *.ipi in c:\Windows\Installer

  No InProgress subkey

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer

  services.msc

  default settings - not started / the manual value

  changed - start Setup / set to automatic

  Hi Keith,

  Sorry the methods above do not help us to your question.
  You are currently on your Windows updates?
  You could check and see if the following article will help you.
  Article 971058 - How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  It could also help:
  Article 2438651 - how to troubleshoot issues that may occur when you install, uninstall, or upgrade a program on a Windows computer:
  http://support.Microsoft.com/kb/2438651

  Please let us know if one of these suggestions help you.

  Marilyn

• I get an error, the "restricted user" when I try to install a program on the administrator account.

  Original title: usuario restrito

  I have two users in my laptop. The two are of me. One is administrator, and the second is a standard user. I set it up like this for more security.

  This week I had issues with Real Player, it took too long to open, modify and restore the db. I deleted his PB and it was always damaged for some reason any. So, I decided to remove the real player and do a fresh install.
  But I could ' t because I get a message that I am a user 'restricted' (usuario restrito) and need to seek special privileges to the system administrator.
  Then, I installed Real Player successfully to the administrator account. And it works. But I can't access it from my normal user account.
  So I have two questions:
  1. How can I install the software in the standard account (overcoming the "restricted" user).
  
  
  OR
  
  
  2. How can I use the Real Player software installed in my standard account administrator account?
  
  
  
  

  You can allow ordinary users to perform installations by disabling UAC. Not recommended!

  Sorry, I can't tell you what the problem is when you run RealPlayer as a standard user. Your report "But I can not access it from my regular user account" is too vague to draw conclusions.
  You write "I have two users in my laptop. One is administrator. ' It is a very risky way of running Windows. If your machine develops a problem with your account only admin and then you are in a diabolical situation. Happens all the time... At any time, you must have a spare fully tested and documented, even admin account that you have a spare House key (so that you don't break a window in the case where he lead astray you).

• Satellite Pro L40 - cannot install XP and reinstall Vista too

  I formatted my hard drive to install XP pro.
  And when I tried it didn't work so I tried to re install Vista and it goes to a white screen after stuck in the installation phase complete?

  Any ideas, any help will be greatly appreciated.

  Sorry, but your ad is a bit confusing and not so detailed.
  And you forgot to tell us what phone you have.

  If you try to install Windows XP you an error or something else? I think you forgot the SATA drivers maybe.

  And now try to install Vista with the recovery disk or Microsoft?
  What operating system you want to now?

• Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 on Vista Home Premium SP1 32-bit laptop - fails with error 0x800b0100

  Cannot install SP2 (KB948456 - X 86) on a laptop Vista Home Premium 32 bit SP1 with all updates of Windows installed.  Quickly fails after it starts with error 0x800b0100 in the system log.  It's a fully verified SP2 full download.  I did a full chkdsk /r who fixed some issues.  Removed AVAST.  A running Fix It tool that fixes the problem with crypt services.  Scanned for malware with MRT.  Scanned for malware with MalWareBytes.  Scanned for rootkit with the McAfee tool.  Run the sfc/scannow, that signals mistakes.  The CBS. Partial contents of the LOG file (see KB972036):

  2014-03-18 11:59:36, CBS NonStart info: success, start, treatment not required, as expected.
  2014-03-18 11:59:36, info CSI CSI 3222024 (0x00312a08) store initialized 00000005
  2014-03-18 11:59:36, CBS Session info: initialized 30360259:262197728.
  2014-03-18 11:59:37, info CBS SPI: Parent KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18000 to SP2 package with install state 7
  2014-03-18 11:59:37, CBS Session info: 30360259:262197728 finalized.  Reboot required: no
  2014-03-18 11:59:37, CBS Session info: initialized 30360259:266957728.
  2014-03-18 11:59:38, CBS brand store corruption flag because of package info: Package_for_KB972036 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.2.0. HR: 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPICbsClient::EnumPackages:156) cannot open the package hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSystem::EnumerateCbsPackages:313) could not complete CBS package list hr = 0x800b0100
  2014-03-18 11:59:38, CBS Session info: 30360259:266957728 finalized.  Reboot required: no
  2014-03-18 11:59:38, info CBS SPI: could not enumerate the packages CBS
  2014-03-18 11:59:38, error CBS SPI: (GetLatestVersionFromCBSStore:135) ATL exception hr = 0x800b0100
  2014-03-18 11:59:38, error CBS SPI: (CSPCInstallTask::ApplicabilityScan:712) could not get the latest version of VistaSP2.

  KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18005 hr = 0x800b0100 store

  System will not install KB972036 - States does not apply.

  Referring to 956702 KB notes that the http://go.microsoft.com/fwlink/?LinkId=167357 link that needs 32-bit is 64-bit.  In addition, it specifies SP2 - which obviously I do not have.  But I manually downloaded the apparently correct tool and ran it - get does not apply.

  Hi John,.

  Apologize for the delay in response. Please try the steps as described in the following article:

  Windows Update error 800b0100

  Back to us for assistance.

• 'Not a valid W32 application' blackBerry smartphones cannot install software

  I can download the software, but cannot install it. I get the message that the file 'is not a valid W32 application. Someone knows how can I fix?

  Problem solved. The file have not completely downloaded. Made 2 further attempts it downloaded completely and was able to install it successfully.