Photosmart 3180 all-in-one driver

Similar Questions

• 7520 photosmart e All in One: driver Photosmart 7520 e all-in-one

  I've been going round in circles around this hp website that keeps taking me around and in the same places without being able to find a link to download driver 7520 Photosmart e All In One Printer.  It was so much easier - now I can spend hours trying to achieve and I'm on this forum ask for help for someone who just sent me a link to download the driver help please!

  Hello

  You can download the drivers for the Photosmart 7520 directly from the following link:

  http://ftp.HP.com/pub/softlib/software12/COL43773/MP-108670-3/PS7520_1315-1.exe

  Kind regards

  Shlomi

• C Photosmart 3180 all in one printer does not print

  Have a constant message print transport is paper jam (appears on my screen to count) and flashing lights two albums on the printer "check paper" and "Check the Cartiges print" won't let not my printer print.

  I have exausted HP on line video problems on 'How to fix a paper jam' and 'how to replace the ink cartridges.

  I have replace BOTH ink cartridges. And always the lights go out.

  I did how to clear procedures for the printer, but the printer will not print a test page.

  The printer soundes stronger than in the past and sometimes the transport comes into contact with a little leaver as he tries to come back in the right position. But the printer will move left and right at hand.

  This printer has had very little use ove in recent years.

  It is time to replace? Or is there a procedure for Service that can be performed?

  My computer is Windows XP

  Put an end to my witts at...  Thank you

  Hi elfmanjim,

  If you have tried all of the documents and the video below. It is possible that the printer will have to be replaced. I have provided some documents and video as well as a few options to enter a new printer below. Let me know what you find?

  Flashing lights

  Transport jam ' Message is displayed on the computer

• HP Photosmart 2575 all-in-one: old printer driver

  I have an old printer but cannot find a suitable driver for the HP Photosmart 2575 all-in-one

  Who can give me a link (!) backup without mallware?

  IK heb een oude HP Photosmart 2575 all-in-one printer. Kan iemand mij een safe link give above allerlei andere mallware zonder rommel you downloaden?

  Thank you

  Alvast bedankt

  Margaretha

  Hi @margaretha54,

  Welcome to the Forums of HP Support! I see that you are interested in the software and drivers for your Photosmart 2575 HP so you can install it on your computer running Windows 7 operating system.

  There is no compatible software and drivers for the Windows 7 operating system.

  I suggest you contact our technical support at www.hp.com/contacthp/ to see all the options available to them for you. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thank you for being a part of the community of HP. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

• Photosmart c6250 all-in-one: frustration driver location

  New hard drive replace crapped-out of road.  Try to find and download the printer driver [Photosmart c6250 all-in-one] successfully to zero on the HP support site... remarkable circular effort: point to drivers, identify the printer, poster printer photo on the screen does not work... Thank you very much!  This should not be comparable to eye surgery.  I started by trying to stay away from sites not HP, but it isn't work.

  Hello:

  Here is the link to the page support and driver for your printer.

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3308552/drivers

  I can access the selection of the pilot very well.

  I discovered by another forum member who:

  1. for pages works properly, you must use Internet Explorer 10 or 11.

  It is a problem for some of us who climb to IE9 such as those who have Vista or a new install of W7.

  The workaround to get IE8 or IE9 to access the page of the pilot is to:

  1. activate the command bar at the top of the browser (click just to the right and check the option of command bar).

  2. then click on the small arrow to the right of the Tools menu.

  3. click on compatibility view settings

  4 uncheck use Microsoft compatibility lists.

  5. close and refresh the page.

  You will probably then a message you must run IE10 or IE11, but you can close this and get to drivers.

• HP Photosmart C4150 all-in-One printer/scanner/copier - the file you specified does not contain a compatible software driver for your device.

  I'm about to pull out my hair!

  My HP Photosmart C4150 all-in-One printer/scanner/copier will SCANNER is no longer.  I uninstalled the printer in the hope of re - install and fix the problem, but now I can't re-install.  He tells me I'm the operating system (Windows Vista - 64 bit OS) is not compatible.
  I remember that I kept getting error messages when Microsoft Updates running on my computer and I followed some "fix" for the error to go away in a few months.  I think I should have done something to mess up my driver?
  I'm not computer savvy so I hope someone out there can help me get my printer, re-installed and the scan option to work again.
  It seems to me have tried every download from the HP Web site, and nothing seems to help!

  Hello

  1 did you change your computer, after which the issue started?
  2. are you connected to a domain?
  3. have you downloaded the correct driver version?

  I would recommend that you download the correct driver (Vista 64-bit) from this link and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=1832919

• Scan driver for HP Photosmart C5180 all-in-One

  I recently replaced my hard drive and while my printer (HP Photosmart C5180 All-In-One) works fine, I have no more scanning software. When I insert the installation disk I get a message saying that the software is not compatible with Vista (Home Premium). All I can find on the site of HP's software driver. This disc was used to work on this computer. The only difference I can think is that Vista has been updated. Where can I find analytical software that works on my Vista OS update?

  Try this driver for Vista

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-47461-2&cc=us&DLC=en&LC=en&OS=2100&product=1153481&sw_lang=

• Photosmart 2610: Photosmart 2610 All In One

  I recently had to reinstall my HP Photosmart 2610 all-in-one.

  I have the software comes from www.hp.com.au and installed it.   At the end of installation, I've set up and the printer print a sample page.

  When I went into settings it has shown that a Photosmart 2610 printer has been connected to the PC >

  However, when I try to print anything I get redirected to the "Send Fax" page, and the document will not display.

  Help!   hehehe

  Phil

  Try to reinstall the software, use thislink to dnload the driver full features and software.

• HP Photosmart 3110 all-in-one: compatibility Windows 10

  I wonder if HP Photosmart 3110 all-in-one printer is compatible with Windows 10?  If yes how to install the driver (I can't find the installation disk)?

  Hello

  A basic set of printing and scanning for your printer driver is available for Windows 10.

  As the link above provided by @banhien seems to be broken, follow this link to install the printer on Windows 10:

  http://support.HP.com/us-en/document/c01796879

  Kind regards

  Shlomi

• "" HP Photosmart e-all-in-one Pr: "HP Photosmart e-all-in-one printer - D110a installed 10 windows now scanner does not work

  Application of scan works

  Try download and install the driver and test the HP Photosmart Software Suite for your printer at http://support.hp.com/us-en/drivers/selfservice/HP-Photosmart-e-All-in-One-Printer-series---D1/4023244/model/4023245

• Photosmart e-All-in-One Printe: Photosmart e-all-in-one - D110a does not print text or Doc file

  Until that number today printing problems.

  Now can't print from Word or any text file.

  All other OK.

  Uninstalled and reinstalled SW.

  Problem remains.

  Word files and text printed in WHITE.

  All others are OK.

  Hey @Clark_Stillman,

  I understand that when you print from your Windows 8.1 computer to your HP Photosmart e-all-in-one printer D110a print jobs are coming in white. I would like to help you today with this printing problem. When you print from your computer, some files are sent to your printer as "image" files If your printer 'think' it prints an image, color ink may be used to enrich or to 'do' the dark. This can be misleading because your machine can really be confronted a black ink, problem of print, but you may think that your machine works great as always black appears in print. While in reality, it's just the ink to mix color to black. Therefore, at the beginning troubleshooting I'll have print you a standalone report diagnosis on the quality of your printer. This report will help us determine if this printing of the blank page problem is caused by your printers ink system or your computer. Can I please you follow the steps below.

  How to print a report of quality diagnostic:

  1. Load plain white paper in the input tray.
  2. Tap the button of the ATM () next to the icon of configuration () in the lower left corner of the control panel.
  3. Press arrow right () and select Tools, and then tap OK.
  4. Press arrow right () to select Print Quality Report, then tap OK. The printer prints the report.

  

  • If this report prints perfectly: Only the blank page printing problem isn't be caused by your printer. On the contrary, there may be a driver or a conflicts between your computer and your HP Photosmart camera setting. Can I have it please click here to download and run the HP print and scan of the doctor tool. Once the tool downloads, please run the tool to the "difficulty of printing." If connection, software or driver conflicts turns out that the HP print and scan of the doctor tool will attempt to resolve these conflicts for you. Once the tool has completed please test printing from your computer.
  • If this report does not print correctly:  That the problem you are experiencing is caused by the printing of your printer system. To solve this problem of print quality can I please have you click here to access the appropriate troubleshooting steps. Once the support document opens please run through the Solution, one five, six Solution and seven. This includes all sub-steps under the listed Solutions. Once completed the print quality troubleshooting steps, please try to print to see if the problem is now resolved.

  Please reply to this message with the result of your troubleshooting. You can also click thethumbs up' ' icon below to say "thanks for the help!" I look forward to hear from you!

• HP Photosmart C4280 all-in-one no scan

  Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software

  I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running

  I connect to the printer with a USB cable and have used the two USB ports to make sure that this isn't a wobbly port.

  When I push the scan from the printer button, HPScan starts, then an error message is displayed: The HP Communications Application does not run.
  When I run ScanPro the following error message: Sorry, scanner could not be initialized.

  I already downloaded and installed the latest printer driver.

  Any help would be greatly appreciated. My latest project continues upward while I try to scan to run.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Photosmart C6280 all-in-One: I can't cancel an installation HP

  My all-in-one software has already been installed successfully years ago. My husband did not know that he had to go through the "devices and printers" in the "Start" menu to access the analysis feature, so he assumed that scanning capabilities were not working. He tried to install the software from the internet, and it gave an error. Now, I can not completely cancel the installation process. I get pop HP ups "of Installer HP request your permission...". "If I let the permission, he brings me through the whole process again just to give me the same error. If I cancel the authorization, he just keeps popping up. How completely cancel the installation attempt?

  It seems that the installation is trying to update the old version to the new version but is a failure.  I suggest that you restart the computer, then uninstall the driver, old and new.

  Of course by then, you can reinstall the printer as you did before, or by getting the software from our site directly:

  http://support.HP.com/us-en/product/HP-Photosmart-C6200-all-in-one-printer-series/3194493/model/3194497/drivers

  Let me know if unistalling corrects or does not solve the underlying problem and we can look further.

• Photosmart C4280 all-in-one: HP Photosmart C4280 Scan features do not work with Windows 10

  S s s s today, there is no drivers for printing or scanning of the utilities on the HP site. I was able to get to join the TRIOUX printer, butttttnosaninfunctions work with the push button on the machine. Also, because I lost the original CD that came with it, I can't scan utilities to work. I don't know that the same CD would work with Windows 10. In any case, HP will be an upgrade of Windows 10 for this printer include the scanning of the functions? Thank you

  Hey @Rong1,

  Welcome to the Forums of HP Support!

  I see you want to use the features of printing and scanning of your HP Photosmart C4280 all-in-One Printer on your computer Windows 10. I want to help you with this today. I'm happy to announce that the full feature software and drivers are available for your printer!  Just pilots have not yet been added under Windows 10 drop-down list on our Web site. However, I will you link to the driver package to install your printer. Please follow the steps below.

  If you use a USB connection between your computer and the printer please unplug this cable now.

  Step 1: Remove the printer:

  We want a clean slate to install your printer on the computer Windows 10. Therefore, I will you ensure that no trace of your HP Photosmart camera does not currently installed on your computer.

  1. click on the Start button

  

  2. type programs and features. If a search does not start automatically, you will need to type programs and features in the area of "Ask Me anything".

  3. click on programs and features to launch the window.

  4. in programs and features, will populate a list of the programs installed on your computer. Please scroll down and find your Camera HP Photosmart. If you see your HP Photosmart listed, click on it and choose Uninstall.

  5 follow the prompts on the screen to complete the uninstallation. Once the uninstall is complete successfully please close programs and features.

  6. then, click on the menu start of new

  7. this time type devices

  8 click on devices and printers to launch the window.

  

  9. in devices and printers are looking for your Camera HP Photosmart. If you see if if please right click above and choose 'Remove' or 'Remove'.

  10. Once your HP Photosmart camera is like showing in devices and printers please click on any device in the list of Printers once just to highlight. Click the print server properties on top

  

  11. click on the drivers tab

  12. search for your HP Photosmart driver. If the list, please click it and choose delete

  13. Select delete the driver only

  14. Select OK

  15 click apply and OK in the print server properties window.

  16. close devices and printers. Please proceed to the next step.

  Step 2: Install the device:

  1. Please click here to download the full functionality of the software and the driver for your printer
  2. Once the download is complete, follow the prompts on the screen to install your printer
  3. If you use a USB cable connection, leave the disconnected cable until the installation program prompts you to connect

  Once installation is complete, please try printing and scanning.

  Please reply to this message with the result of your installation. Good luck!

• Cannot install HP Photosmart C6380 all-in-One Printer

  Original title: HP Photosmart C6380 all-in-One Printer, it will not be installed in the computer disk or web site

  None of the things I have tried will allow programs to download and when I go to detect does not detect the printer at all so anything that I want to use this for is not good and I about ready to kill hp all to gether

  Hello

  1. who is the operating system installed on the computer?
  2. have you checked if the HP printer is compatible with the version of the operating system that you are using?
  3. do you get an error message when you try to install the driver?
  4. what all troubleshooting have you tried?

  If you use Windows 7, follow these methods.

  Method 1: You can also run the fixit of material.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: in the Windows printer problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For more information, see these articles:

  Install a printer
  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer
   
  Find and install printer drivers
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Please provide us with more information on question help you also.