Photosmart 3210xi top will not close

Similar Questions

• LaserJet M452dw: Laserjet M452dw paper tray will not close

  Removed the tray paper to add paper and now the tray was arrested along with about 3 inches to go and will not close.  I also noticed that the drop-down menu that is located above the status bar was low so I pushed him to the top in place, but the drawer is still not closed.

  Problem solved, it was the length of tray setting that had to be closed for paper to letter!

• After IOS 10.0.2, camera will not close

  Just did the upgrade to the new IOS, and now everytime I open my phone or my pad, the camera is open and will not close. Reboots do not help.

  Hello. Can you explain more? You open the smart cover or click on the Home button and immediately see the camera? You should see the lock with a message screen to press home to open. The lock screen is now configured with the page today (widgets) on the left and on the right camera, so you can drag to get access without having to open the iPad. If you enter the camera, by error, by clicking on home leaves you.

• Windows Firefox will not close.

  Hello
  I am running windows 8.1 and Firefox 38.0.1. whenever I click on the Red 'x' to close Firefox, Firefox will not close. If I want to close all tabs, Firefox does not close the last tab. If I try to merge windows (by dragging the tab of a window in a different window) Firefox will create a blank tab on the window where I dragged the dragged tab. So far, the only way to close the Fire Fox is click on the close button or to stop by the Task Manager. When I re - open Firefox Windows and previous tabs are also there, and I'm still not able to close them. I restarted my PC and reinstalled Firefox (uninstalled and re-download). However, after downloading Firefox... the same windows will be opened, with the same tabs! It's horrible!

  Hello cach_dies,

  Try Firefox Safe mode to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).

  If Firefox is open, you can restart Firefox Safe mode in the Help menu:

  • Click the menu button

    

    click Help

    

    then select restart with disabled modules.

  If Firefox does not work, you can start Firefox in Mode safe as follows:

  • On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac: Hold the option key during the startup of Firefox.
  • On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
    (you may need to specify the installation path of Firefox for example/usr/lib/firefox)

  When the Firefox Safe Mode window appears, select "start mode safe."

  

  If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. This might help others with the same problem.

• Web sites will not close. How can I force them? Cannot close their or firefox.

  I have three tabs that will not close or allow me to close firefox.

  Start Firefox in Mode safe to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  To turn on safe mode

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.
  • Once you get the pop-up, simply select "" boot mode safe. "

  If it works in Mode safe mode and normal mode with all extensions (Tools > Modules > Extensions) off and then try to find which extension is the cause by allowing an extension at a time until the problem reappears.

  Close and restart Firefox after each change via "Firefox > Exit ' (Windows: Firefox/file > quit;) Mac: ' Firefox > quit Firefox. " Linux: "Firefox/file > exit ')

  • https://support.Mozilla.org/en-us/KB/troubleshoot-Firefox-issues-using-safe-mode
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Keynote will not close

  I downloaded a PowerPoint to Keynote. When I tried closing keynote it will not close and stop me logging off my mac properly.

  You can use the keyboard shortcut leave force: Command + Option + ESC.

• Notification Center will not close on my ipad 2

  My notification/widgets page will not close on my IPAD 2.  When I drag the page, it won't move.  I can see my page weakly in the background with "slide to unlock" and the clock start, but could not get anything to move.  I wanted to try to start again, but I can't stop because I can't drag any suggestions?

  Hi ghartman1,

  Please visit Apple support communities.

  If you can't drag to unlock your iPad or turn it off, you can force it to restart:

  Restart your iPhone, iPad or iPod touch

  How to force reboot

  You must force restart your iPhone, iPad or iPod touch as a last resort, and that if it does not. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  You can also learn what to do if your device isn't yet to respond or turn on.

  All the best.

• Hotmail will not close due to open browser cookies

  Hotmail will not close due to open browser cookies

  Hi RogelioWelch,

  ·         What web browser do you use?

  ·         What version of the operating system is installed on the computer?

  ·         The question is limited to the hotmail only site?

  If you are using Internet Explorer, follow the steps in the article.

  Block or allow cookies

  Cookies: Frequently asked questions

  If the problem persists, you can also post your request in the forums of hotmail.

  http://www.windowslivehelp.com/product.aspx?ProductID=1

• All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen

  All of a sudden my Acer Iconia One 10 will not close or disable. It flashes just the splash screen "Acer Explorer beyond the limits; Powered by Android.

  What should I do?

  Problem with the cord/charge plug unit... is very loose and since I bought it. It takes an extraordinary amount of time to load. Is it defective?

  According to the description of the connection of the power supply or you have a problem with the power outlet (perhaps folded ut of shape enough to cause free adjustment) or Charger (connection flashing in-house, exit misfeed or simply that bad). If I was in your position I would take back and get one without load problems. You can send it through Acer support and they will fix it for you, but back to the seller will be faster.

• CD ROM tray remains open, will not close

  CD Rom tray will not close. When I restart the PC the tray closes but opens again and stays that way.

  Hello

  1. have you done any change in software on the computer lately?

  Method 1.
  If the problem persists, start the computer to start clean and control state.
  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Method 2.
  Also, check with the manufacturer of the DVD drive and check for possible mechanical damage on the drive.

  I hope this helps.

• HP Photosmart D110 printer will not install with Windows Vista?

  HP Photosmart D110 printer will not install with Windows Vista?

  Hello

  (1) what happens when you try to install the printer?

  (2) you get an error message?

  Method 1: You can run the fixit available in the link below and check to see if that makes a difference

  Problems printing and printing errors

  http://support.Microsoft.com/mats/printing_problems/

  You might want to know

  Add or remove a printer

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my lab top will not update automatically

  my lab top will not update automatically.  I tried for 3 days and it seems to work very slow or it just freezes.  can someone help me please?  I am not at all computer bum

  Windows 7 update problems? First read this.

  :)

• 5520 PHOTOSMART HP printer will not print email or any element of the internet

  MY NEW PHOTOSMART PRINTER 5520 WILL NOT PRINT E MAIL OR ANY POINT ON THE INTERNET. PRINTER HAS BEEN SUCCESSFULLY INSTALLED AND WORKS

  Original title: 5520 PRINTER PHOTOSMART DIFFICULTY IT TOOL HP

  Hi Frederic,.

  1. what browser you want to print?

  2 error messages when you try to print?

  This problem may occur for one or more of the following scenarios:

  a. you don't have printer permissions assigned

  b. Protected Mode is enabled for the web page Internet safety zone

  c. There is a problem with the temporary folders on your user account and the low folder under the location of % TEMP % has been removed.

  Method 1: Try printing HP and Scan Doctor for Windows

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03275041

  Method 2: Please refer to the article to resolve the problem. Follow the instructions if you are using Internet explorer:

  I can't print or preview before printing a Web page in Internet Explorer

  http://support.Microsoft.com/kb/973479/en-us

  Hope that the information provided is useful. If you need help with Windows, please let us know we will be happy to help you.

• BlackBerry Smartphone app Center will not close! Help!

  I don't know if anyone has faced this... but my app Center will not close!

  When I pressed the bb and the small menu appears in the center of the app are still there... If I click on it it does nothing.

  I tried to reboot (battery and everything), opening center app (just opens a new one out while both are open)

  I don't know what happens >.

  also on a side note... a small blue apperaed icon next to my bars of reception with a symbol in it... i can look for that when I get home... but I didn't know that until today...

  The application Center never closes.

  you will always have a minimum of 5 'applications' running:

  App Center

  Browser (make sure that it is not on a web page)

  Home

  Mail

  'Call' screen

• Photosmart C41 installer will not work

  The netwoed has an existing C41 all-in-one printer.

  Adding a new PC - Windows 7 and reconfigurinbg another XP, downloaded drivers will not install.

  This happens even with a startup mode without failure, or a boot, the sequence of the expansion, but when the dialog box closes, that's all.

  There is no inatallatiion subsequebt dialog box.

  The temporary folder and unning extends the "mnually" file it seems to start and a process can be seen in the Task Manager, but nothing else happens!

  Win 7 PC is brand-new, apart files impiorting of its predecessor (transfer Assistant), it had not been used before attempting to install the Photosmart C41 all-in-one printer/scanner drivers.

  Any ideas?

  BTW, Ive also tried the 'Lite' version package - same result...

  See you soon,.

  Ron

  Hi Ron,

  Can refer you to the HP Photosmart C410 model?

  Try following the steps below and check if this solve the problem:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Never select and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7 restart your PC
  8. run the installation file and check all difference.
  9. Once you have finished, remember to open McAfee and re-enable real-time scanning.

  If it persists, please open the Device Manager and spend section of processors. What CPU you have on your PC?

  Kind regards
  Shlomi