Photosmart 5510 all-in-one: chromebook, scanning, multiple pages

Similar Questions

• Problem connecting USB to install HP Photosmart 5510 all-in-one inkjet

  Photosmart 5510 all-in-one inkjet

  Windows XP Pro x 86 (32-bit) service pack 3

  Software installs fine until he asking for the type of connection. The computer does not have wireless so I select USB connection and it fails every time. If I select to connect to PC later and plug in the USB, Windows detects new hardware (HP 5510) and asks where to look for drivers. When directed to the installation CD "Invalid data" error when copying files. In the Device Manager in the USB section it lists the Photosmart 5510 with a yellow! Selection of reinstall the driver results in an "impossible to install error.

  There is no other printer currently installed on the computer and the 5510 Photosmart is set as default printer. So far I have;

  tried different usb ports

  tried running the installer from the installation CD

  I tried to download updated drivers

  tried to install with disabled firewall and antivirus

  tried to install it in safe mode

  Same problem occurs every time. Any solutions or suggestions would be greatly appreciated!

  Thank you.

  Finally solved the problem. Had an old Pentium 3 machine around the pose and decided to try to change the disk hard on and see if I could install the printer with a different material.

  It turns out that the mup.sys file, which has something to do with PnP devices, has been damaged and Windows wouldn't start in the other Tower. Then, I took out the HARD drive and put it back in the Dell can reformat Windows XP and guess what, printer installed without a hitch the first time I tried! Now I have to reinstall everything on the computer * sigh *.

  In any case, the printer problem fixed!

• HP Photosmart C4280 all-in-one no scan

  Although my printer works fine for printing and copying, I get error messages when I try to scan by pressing the button or by using the HP software

  I use the HP Photosmart C4280 all-in-one with a MacBook OSX 10.5.7 running

  I connect to the printer with a USB cable and have used the two USB ports to make sure that this isn't a wobbly port.

  When I push the scan from the printer button, HPScan starts, then an error message is displayed: The HP Communications Application does not run.
  When I run ScanPro the following error message: Sorry, scanner could not be initialized.

  I already downloaded and installed the latest printer driver.

  Any help would be greatly appreciated. My latest project continues upward while I try to scan to run.

  We will restore the print system:

  -Go to System Preferences > Print & Fax
  -Right (or control) click in the rectangle listing your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign more to add a printer. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• HP Envy 4500 e-all-in-one Seri: scanning multipe pages in a document file

  I'm trying to scan multiple pages in a document file. I am currently using Windows 10. What are the steps to do this successfully.

  Hello

  Thank you for using the forum.

  To use the Scan software on your printer, you will need to download and install the printer driver.

  We recommend that you download the full features and it can be found here:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5304876#Z7_3054ICK0K8UDA0AQC11TA930C7

  Once you have installed the software, you can click the icon for the printer on the desktop and it will bring up the HP Printer Wizard and you can use the Scan software.

  You will first need to scan more than one page, select "Save as PDF".

  Once you've scanned the first page, in order to scan several pages, you will need to click on 'Add page' (as shown)

  

  When you are finished, you can save the document.

  Here are several videos giving you good advice on digitization (printers in the videos are using the same software to Scan as your HP Envy 4500)

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scanning tips:

  HP Officejet Pro 8630

  https://goo.GL/fjZvqM

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

  Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

• Photosmart C6188 all-in-one not scan on the mac with OS 10.6.1

  I just bought a new mac with snow leopard and incapable of having the C6188 HP photosmart all in one analysis images on mac.

  I made the mistake of installing the original software which is come with the printer, and then discovered that it does not get. So I uninstalled the software and performed an update to the Apple software.

  I tried according to your publications/announcement about the leopard snow, preferably using system preferences and applications of image capture.  I can print all right, but unable to scan images on mac.  I get the error message is ' year error occurred while communicating with the scanner.  It's the same message that I get from all three applications (preferably, preferences system and capture image).

  A big thank you to all who can help...

  I'm glad it's working for you now.  Multiple page in one file is a driver problem.  Sorry, you will need to wait for an update.

  In the meantime, it is very easy to combine pages in a file (pdf) with preview.

• New black cartridge does not print - Photosmart 5510 all-in-One

  I replaced all my ink cartridges when they ran.  The black cartridge is printing not and cannot even print alignment test page to align my new cartridges.  They are HP cartridges I bought and now after all cleaning procedures, I have now exhausted all new cartridges.  My warranty is exceeded, even if I have not received the new printer last Christmas, but my family he registered in August when they bought it for me.  I'm going to buy new cartridges, but I fear that I will lose more money that this problem will not be solved.  Someone help.  I have uninstalled, reinstalled, cleaned print heads, tried to align the cartridges but error message appears then all new Board would be good.  Thank you

  Hello Cath,

  I'm really sorry to hear about your Photosmart 5510 aligning properly and not printing in black ink. I understand that you have tried to align the printer and it has not solved the problem. I want to help you and make you my best to do it!

  At this point, I do not pretend to try new cartridges (especially black) and trying to do the alignment again. I found a useful troubleshooting guide following which solves the problem, I hope.

  Here's the guide I recommend following step by step:

  A "alignment failed" Error Message appears on the printer

  * Tip - make sure that the printer is connected directly to the wall outlet.

  Please do not hesitate to post your results here and I will help you further if necessary.

  Take care

• Photosmart HP 5510: print/label with a hp Photosmart 5510 all-in-one

  I would like to label printing on dvd blank that I recorded, my question is: can I print on DVDs with this printer model?

  Hello

  Unfortunately not, this printer does not support printing directly printable CD / DVD.

  Kind regards.

• Photosmart C7250 all-in-one no scan option.

  In a previous answer in the forum, it was stated that the installation of the software is incomplete. The analysis of the computer option has worked previously. Where can I get the software? The original disc has not returned to me after work on the computer and the technician who had to cease their activities.

  Hello

  May I know what is the operating system.

  The software can be downloaded from the following link.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 3204785 & task = &

• Re: How do the reset full on my printer HP Photosmart 5510 all-in-one

  Hello, Im having the same problem please please send me the reset procedure.

  Thank you very much

  AirMen24,

  Wanted to just check in with you and see if the troubleshooting document recommended that @ciara worked for you? You are now able to print in black ink?

  If you always use questions please let me know your current warranty status: check your product warranty

  I look forward to hear from you so that we can this resolved.

  Thank you

• Photosmart 5510 All in ONe

  Installed 2 new black cartridges. Panel shows both cartridges are here and full but will not print. Help!

  I will send you a private message (departure from the envelope at the top on the right)

• HP E4620 Wireless all-in-One: several scans of Page option missing (no + or - boxes at the bottom of the left display window)

  All of a sudden the printer wizard window offers more page several sweep after the first analysis of the page.  This is something that has arisen just even if I had the printer for about 15 months.  I tried several types of custom analyses, as well as the option of scanning HP Everyday.

  Thanks for any help you provide.

  Hello

  The HP scanning software reduce scanning in 300 dpi resolution or below, then click on the button scan.

  Can now see the pages button multiple return?

• Can not stop "auto crop" documents, scan on my HP Photosmart C7280 all-in-one

  I use a HP Photosmart C7280 all-in-one to scan documents.   My OS is Windows 7 64 bit.   I have used this configuration since January 2012 and my problem has just started in the last 30 days.  I did not any changes to the system except for the automatic updates of Windows coming out.

  I unchecked the box "automatically Crop scanned Documents" in the Advanced Document settings, but as soon as I scanned a page, the checkbox appears in the box again (in itself!) and it will automatically crop a bad document.

  No idea why this is happening and what I can do about it?

  Thanks for your help.

  Not really sure what caused it, but looks like the setting has glitched somewhere along the way and will be set when past.  Try unintalling to reinstall a new download.  Let me know what happens.

• 5514 photosmart e-all-in-one: scan multiple pages into a single PDF document?

  How can I scan multiple pages into a single multi-page PDF file?
  I saw posted similar questions, but I have not found all the right answers. The Council alone that I saw was to scan each page in a separate PDF document, then merge them into a single PDF using third party software.
  Of course, I don't want to do.
  I can't believe that there's really no way to do it using the existing HP printing/scanning utilities provided with the hardware.
  My printer/scanner is the "HP Photosmart 5514 e-All-in-One Printer - B111h", and I am running Vista (64 bit) on a HP Pavilion laptop.

  Hello

  The HP scanning software (start > programs > HP > Photosmart HP 5510 series > HP Scan) select PDF and make sure that the resolution is 300 dpi or less.

  Make sure the option Show Scan preview is checked, and click Scan.

  Once the first page of scanning is finished, place the next page on the window and click on the button "+" under the scan preview...

  Once you are done click Save.

  Shlomi

• HP Officejet 5510 all-in-one: scan multiple pages into 1 file/scanjob with my HP Officejet 5510 all-in-one

  Is it possible to scan a page one / several pages in a single file scanjob/one on the flat of my HP Officejet 5510 printer all-in-one?

  I did do some additional research on the internet and found the HP scan and capture the app. Although my HP Officejet 5510 all-in-one did not appear in the list of devices, I installed the app, and it has provided a solution for my problem: scanning multiple pages in a job file. Banhien suggested to click on the + sign, but the drivers, I had do not have one, but the HP scan and capture app has this feature. It's so nice. My problem is solved.

• Scan multiple pages to a PDF using 5510 printer all in one

  It is possible to scan multiple pages to a PDF with the 5510 printer all-in-one? Or stopped from HP that allows this and now you will have to pay Adobe for the software?

  I use Windows 8.1

  Thank you very much for all the advice offered.

  Hello

  Please try:

  (a) analyze the first page,

  (b) click on + (plus sign) to add the second page then 3rd page...

  

  Kind regards.