Impossible to install Access Connections 5.00

Similar Questions

• Impossible to install Acrobat Connect Add-In

  I am trying to install the Add-in on one of my PC so that I can share the screen. He asks me if I want to install the add-in, but by clicking the Yes button (or the No button, for that matter) does nothing. I am referring to the little pop-up dialogue box that says:

  To use this application, you must

  Adobe Acrobat Connect Add-in would be

  you want to install it now?

  At this time, these buttons are dead. I tried the tab through the keys to select the button and then pressing space Yes, but that has no effect either. Tab's work to highlight the buttons, the "?" and the overal dialog box but once the button Yes or no is highlighted there seems to be no way to select one of the buttons.

  I can with the right button on the dialog box and I get the

  Parameters

  About Adobe Flash Player 10

  menu. Settings is off, but I can choose on which shows that I have PS installed 10.0.42.34. Other than that, at this point, there's nothing I can do except to get out of the bathroom window at the meeting.

  This occurs in the two Firefox 3.6 and Internet Explorer 8 on Windows 7. I tried several times, tried to restart.

  How can I get the add-in installed?

  David Salahi

  Hi David!

  You could possibly install first download the installer manually and then running locally. You can find the installer for version 7.5 here:

  http://www.Adobe.com/support/connect/updaters.html

  Also, be sure that you have sufficient privileges to install the software on your computer...

  Kind regards

  / Rikard Stenberg, weZupport

• Impossible to restore the connection to a network drive

  I had to do a fresh install of XP Pro on a CPU in my network.  The server is windows 2000.

  I see the drive (H) network of the central unit, but I am unable to connect.
  I received an error message on impossible to restore the connection.
  I'm not sure what other details that I would need to provide the Forum to ask for the help that I need.
  Any suggestions?

  Check the permissions of the user against the share (network drive).

  Delete the drive mapping, and then try again.

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• ThinkVantage Access Connections for Windows XP on G41

  I use a 2886-5TU G41 and I really screwed up.  I was cleaning my registry and it is a mess.  I lost all network connections, and they are not recoverable.  I reinstalled the software wireless and ethernet.  Device Manager reports the wireless card and Ethernet work.  But I can't connect what either as utilities connection - windows and IBM are corrupt.

  I d/l the 83cx71ww.exe and followed all the instructions.  I reinstalled sp3, hotkey upgrade, NET 4, upgrade of power management before you install the dial-up connection.  Now, when I boot the message I get is that ThinkVantage Access Connections will not work on this system.

  Y at - it somewhere that I can d/l the original supplied with this laptop for connections, files card WiFi and Ethernet card?  The latest just will not work.

  Thank you

  Carl

  Well, it's now a moot point.  Windows was all simply too altered by me and required a reinstall.  I just did.

  Thanks for watching all the.

  Carl

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.

• Impossible to install the dish

  Impossible to install dish tv to my windows media center using a hopper with joey box system

  Hello

  I suggest you turn on and off then on Windows Media Center to try to resolve the problem.

  You can check the link to do so:

  http://Windows.Microsoft.com/en-in/Windows7/turn-Windows-features-on-or-off

  After opening Windows features, I suggest you follow the steps:

  (a) locate the multimedia functions.

  (b) to develop media features and uncheck the box that indicates to Windows Media center.

  (c) click on Yes.

  (d) click OK.

  (e) click restart now.

  (f) after the computer restarts, follow the same steps to open Windows features and search for media features.

  (g) develop multimedia features and check the box that tells Windows Media Center.

  Check if you get the same problem when you try to configure the connection.

  Please let us know about the status of this issue.

• 6.23 access connections wrote dangerous registry key

  ThinkPad W520 4282-A23. Win7-64; 6.23 access connections

  Connections to access profile (slightly simplified) environment:

  1.) office LAN: Ethernet; DHCP environment full

  2.) home LAN: Ethernet; (192.168.2.8) fixed IP address; Router (192.168.2.1) DSL is the DNS server and default gateway and is also a DHCP server (mainly for WLAN clients, but will also answer on cable). All ethernet customers have a fixed IP address to allow independent operation of the DSL router.

  Note: Automatic localization is enabled IN the configuration of the CA.

  Scenario of the (repeatable) error:

  (a) of operating successfully the Office LAN profile: office's LAN disconnect AC

  (b) stopping of the system

  (c) starting system (disconnected ethernet cable at home;)

  (d) connect ethernet cable:

  Access creates the "Name Server" registry key with value 192.168.2.1 in the registry HKLM\SYSTEM\CurrentControlSet\services\Tcpip\Parameters\Interfaces\ key {...}, where {...} is the interface instance related to connections to profile 'Office LAN' (in this case: {9345B66E-EA2A-42AD-ACE5-03BE8E7FD63B}).

  (e) AC connect to profile 'Home LAN' (works ok)

  (f) AC disconnect 'Home LAN'

  (g) system shutdown

  (h) starting system (plugged ethernet cable at the office, in a docking station;)

  (i) AC connection to the profile 'office LAN:

  AC profile connection is successful, but the subsequent resolutions of name server fail. The system has received a full installation of DHCP, including name servers in the DhcpNameServer Key. However, the key 'NameServer' existing still in step d) above obviously outweighs the DhcpNameServers servers. As server names still points to 192.168.2.1, all name resolutions fail in the desktop environment.

  Temporary problem solution: use regedit to manually remove the server from the registry key names.

  I traced this down with ProcMon: Access Connections is the only process that never written in the key of the name server. More specifically (the call stack):

  ACon.dll AcRegistry 16: SetRegistryValue + 0 x 93 0x902f803 C:\Program Files (x 86) \Lenovo\Access Connections\ACon.dll
  17 ACon.dll AcSMBIOSHlpr::IsMasterSwitchExist + 0x21a5 0 x 9034895 C:\Program Files (x 86) \Lenovo\Access Connections\ACon.dll

  I can provide more data on request.

  I called Lenovo support. They said that ThinkVantage programs are not taken in charge.

  The assistants here who can cast a magical spell?

  After the latest Microsoft Windows updates, from January 15, the problem disappeared (with GIC760WW still installed).

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• MAJOR ISSUE: ThinkVantage Access Connections for Windows Vista causing the range problems

  Community salvation and Lenovo,

  He took a whole day to stem actually happening. Note: That there is no discussion on the software or defective equipment: my equipment is working properly. All the software has been uninstalled and installed properly. I would like to highlight: (read on to find out why)

  THE PROBLEM IS CERTAINLY: ThinkVantage Access Connections for Windows Vista.

  Hi Ran,

  Thank you!

  I have not yet tried.

  In the meantime I did several tests and discovered that even with only Power Manager version 2.41 has installed the latest driver wireless Intel Pro, also supported by lenovo is not stabel and FN + F5 or windows network connection fails also to turn the radio back on to after a reboot when the radio is off Prime ;-(

  Reading http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67283

  again and again, I decided to return to the old driver wireless Intel on this page.

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67256

  Reinstalled ThinkVantage Access Connections for Windows Vista version 5.12

  I tested it again... THIS MARKET!

  Please try this combination:

  BIOS version: 1.15

  Bluetooth with Enhanced Data Rate software II for Windows Vista Version: 6.2.0.5000

  ThinkVantage Active Protection System for Windows Vista 32-bit, XP, 2000 Version: 1.62

  Driver ThinkPad Power Management for Windows Vista, XP, 2000, Me, 98 Version SE: 1.52

  ThinkVantage Productivity Center Pack Version: 3.02

  Power Manager for Windows Vista Version: 2.41 has

  ThinkVantage Access Connections for Windows Vista Version 5.12.

  Intel Wireless LAN (11abgn, abg, bg) for Windows Vista API 11.05.0

  Kind regards

  Ritchy

• Impossible to install a host operating system

  Install completely new for vSphere 5.0 on the new Dell server.  vSphere server and client installed on the appropriate machines.  Made datacenter and virtual machine made, but impossible to install OS on it.  Srv Win2008 installation 2.

  I tried to install from the customer and welcome CD, install from memory stick and install from ISO on the client.  I've disabled PXE and moved CD at the top of the boot list.  I hit f12 and specifically selected boot to a CD.  I still receive the "could not be found operating system".

  I can't find anywhere that tells me how to copy an ISO on the host drive and I do not know shell (said I don't).

  Everything I found on google is a dead-end.

  Any help would be great!

  Greg

  Welcome to the community - are you sure that the CD is bootable? To copy an ISO file to a data store on your ESXi host, you can use a program like winscp but you will need SSH access is enabled or using browser data store will allow you to copy the ISO file on your desktop into your ESXi hosr -.

• L530 - Access Connections: proxy + settings homepage

  The problem is on a brend new L530, installed from scratch with Win7 64 bit Enterprise, no Center solutions Lenovo, just updated Lenovo (5.02.0018) and Lenovo access connection system (6.01).

  The steps I did:

  1. Ethernet cable is plugged
  2. Starting system
  3. After a while AC asked the name of the new profile, beating Pavilion of the box "Edit profile."
  4. Settings changed
  5. Apply profile... nothing happened on the control panel (Internet Options) if IE is useless.
  6. Looks like Firefox changed settings (profile manual and all the settings are there).

  I hope AC would set "Control Panel-> Internet options", so that all modern browsers would work (Chrome and Firefox have all two 'System Settings' for the Proxy settings).

  Keep in mind that if I restart the system (perhaps to force AC to read profiles) looks like everything is working properly.

  The real problem seems related to profiles created after loading of AC.

  Any clue?

  Moderator Edit:  Please DO NOT post in threads of 4 years and more!

  Perhaps this could be useful for someone because I think I found the problem: pay attention to the setting "No. Proxy!

  I did some tests and it seems that HQ does not have 'Firefox' syntax for this parameter (i.e. 10.0.0.0/8), if you put it on the profile the proxy parameter will not be scheduled.

  The other problem is that Firefox will not include IE settings (10.*).

  At the moment I put in place of the profiles just with 'Syntax of IE' and wrote on BugZilla:
  https://Bugzilla.Mozilla.org/show_bug.cgi?id=260883

• Impossible to install the Safari extensions; error message

  Impossible to install the Safari extensions; error message

  Hello

  Make sure that OS X and Safari are up-to-date.

  Open system preferences > App Store, then click on: check now

  Your profile says your Mac works v10.11.1. The v10.11.5 update is available. This is maybe the reason why you can not install the Safari extensions.

• All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?               NG who

  All of a sudden I can't order prints on my computer. I get a message saying that it is impossible to establish a connection. That is what it is?

  It is almost impossible to help until that give you more details.

  • What application or website are you trying to order prints of?
  • Which iMac do you have?
  • What version of Mac OS X are you using? Is it really 10.6.8?

• Impossible to install the operating system using the product on Satellite 1110 recovery CD

  I had to replace my hard drive after the failure, but impossible to install Windows XP Home (Home) from the recovery CD. I followed the instructions on the CD case, but nothing happens, just a cursor flashing at the top left of the screen. If I try to install XP on a disk (which I just can't finish because it is already registered), then the installation begins as it should. A disc of windows 2000 installs also successfully.

  I realize that it could be the drive itself, but it does not appear the disk is not bootable. I will be grateful for suggestions.

  Simon

  Hello Simon

  Supplied restore CD is bootable. If I remember well, you should have 2 recovery (1/2 and 2/2) CD. It sounds stupid, but you can try to start the procedure of facilities using CD 2/2. A few months ago, I read a topic where a member of the forum has reported on the incorrect labelling of CD.