Photosmart 5515 - how to set duplex printing? and duplexing of the M/s word?

Similar Questions

• Photosmart 5515 appearing as a regular printer and the other grayed printer under windows 7.

  I have windows 7 32-bit, with 500 GB disk and 4 GB of ram. J’ai récemment supprimé tous mes pilotes usb et puis réinstallé, parce que je recevais l’écran bleu de la mort (BSOD) chaque semaine ou deux, prétendument causé par le pilote usb d’etron de gigabyte. My motherboard is a gigabyte GA-A75-D3H.

  I went through several iterations recover my usb drivers and working properly. The last problem seems to be with the printer driver. I have just turned the printer off, removed the two printers from the list of devices and printers, and back in the printer market. The drivers once again and the printer "shadow" is back.

  I tried printing HP and doctor scan, and it is a photosmart 5515 says he was not installed. And there does appear to be a way to remove it from its list of HP devices.

  I don't know what to do next. I used windows xp for years and I'm quite familiar with it, but I'm still learning on windows 7, so I don't know what would be my next step in this process of elimination of the printer "shadow" disappear for good.

  It turns out that the greyed out printer still had something left in its queue. It was not connected to any port, so I plugged in the port for the regular printer, and it printed a few things. And now, the greyed out printer disappeared, so I guess that the queue to be empty. Problem solved.

• Photosmart c4580: how to reconnect wifi printer after I changed the wifi network security key

  I changed my network security key and now my printer cannot 1) added a new device and 2) appears offline.  I restarted the printer.  How can I get the printer on the network after I changed the network security key.

  Replacement/change your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• My iPhone6 has convinced himself that he has a helmet connected - how can I convince otherwise and return to the normal setting?

  My iPhone6 has convinced himself that he has a helmet connected - how can I convince otherwise and return to the normal setting?  I tried turning it off and back on after awhile, but did not.

  Double check with a magnifying glass and a good lighting that nothing has been slain. Then, try insertion and withdrawal of your headphones a couple of times. If this does not work, it may be while the shooting went wrong. In this case, make an appointment at the Genius Bar at your local Apple store for the assessment.

• How to set text in an object, so the object expands with the text and has even space on both sides of the object in illustrator cc?

  How to set text in an object, so the object expands with the text and has even space on both sides of the object in illustrator cc?

  R,

  You can do this:

  (1) create the initial direct Type;

  (2) in the appearance palette dialog, click on add a new fill and define the color as you wish;

  (3) effect > convert to shape > Rectangle corners round/Rectangle/Ellipse and set parent > width/extra height as you wish (essentially what needs to be added to the size of the bounding box, if anything).

  After that you can change the Type and the filled area will fit as shown on the picture.

• How to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012

  Hello

  I would like to know how to set up a personalized message for the prevention of the installation of the software via group policy in windows server 2012 R2.

  I released some software in my field to a distribution point and I of installation for few of them software restriction policies. But I don't want the default next message below:

  "The system administrator has set policies to prevent this installation." This installation is forbidden by system policy. Contact your system administrator. »

  Instead, I would like to set up a custom message. Please tell us how can I do same by using Group Policy, if not available, what are the alternatives that I can use.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there.

  Original title: need help with wordpad problem

  When I have something to stick in wordpad and then change the text, I'll then on preview before printing and most of the time the whole document is not there. I double space between lines and all that is more than one page disappears. I tried all the different formats (no envelope, window envelope, etc.). How can I fix?

  Hello

  ·         What happens if you use another application to preview before printing?

  ·         You are able to print the document correctly, or you receive no error message when printing?

  You try to use Microsoft Word or Notepad to check if you face the same problem.

  First of all, I would like to check to see if print preview is working on a new empty document with only a word in it.

  If Yes, then the problem is the document.

  You may need to clear any formatting, that depends on where you copied from.

  Your rule of printer drivers print preview

• Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?

  Original title: upgrade Windows 10

  I have a Dell Studio 1749 under Windows 7 Home Premium.   I postponed the upgrade of Windows 10 to the present day.  The update file appears in the control panel Windows Update Panel, but when I click start it restarts Windows 7 simply and tells me that the new updates have been installed but it was Windows 7 updates since yesterday.

  Is the corrupted Windows 10 download, and if so how can I remove this and re-download the file?    Or maybe another solution?

  Thank you.

  Review:

  • How to: 10 tips before installing Windows 10
  • How to: 10 things to do if the Windows 10 install fails.

  Retry the upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

  Original title: new printer

  I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

  Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

  If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

  • Click on the ORB start and go into devices and printers.
  • Select (click) the icon of your Epson printer.
  • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
  • Click the "Drivers" tab on the print server properties dialog box.
  • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
  • In the context menu, select "Remove driver and driver package" and click OK
  • Click Yes, and then delete
  • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
  • Install the driver and the software using the file that you downloaded earlier

  At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

• How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  How to convert merge documents and mailing for the docs individual pdf and each with a field record in the merge?

  What is an actual field or just a piece of static text somewhere? Whatever it is, you can't do this using the Split Document command. You will need to use a script custom read the value of this 'field' and use it during extraction of pages in the file.

• HP Photosmart 5520 - how to set printer preferences to print at 100%?

  Photosmart HP 5520 - how to set preferences to printer to print my documents to be 100%? Both single-sided and double-sided documents?

  I seem to get an effect of "reducing to fit", my smaller than my original document print output.

  Make sure that it is set to no scaling

• How to set up printing wireless Photosmart C8180 All-in-one printer.

  My os is Windows 7 64 bit.

  I want to make my printer wireless.  I had it connected to a USB port and after disconnecting I do not know what com to use.

  The easiest way is to connect your printer to your router with an Ethernet cable.  If this is not possible, you can create a wireless connection to the router.  On the front of the printer: Setup > network > Wireless Setup Wizard.

  Once the printer is connected to your network (wired or wireless, it is indifferent), go to start > Control Panel > printers and delete all instances of the printer.  Next:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get the IP address of the printer on a wireless network Test page, printed on the menu of the network printer.
  2. click on > start > Control Panel > printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• How does set a printer 'active' in LabVIEW?

  The method PrintPanel for a VI says that it will print to the printer 'current '.  How does set a that?

  On Windows, all applications start with the default printer and the user can change this to be the "current printer"

  but it's different in each application.

  LabVIEW does seem to have no way to set the current printer until it is needed?

  And why can't the method takes a name of the printer in option though?

  I think you're looking the printingefault printer property for the Application class.

• How to set default print mode instead of fax

  When I click on print from a Web page my hp officejet pro 8500 (A909a model) default Telec.   How can I set the default it goes always straight to the printing mode?  Any help appreciated.  Thank you

  Hello

  I understand it, please download HP print and scan doctor below link to set the default printer. You can also have this practice if you encounter printing problems in the future.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-106151-2&cc=us&DLC=en&LC=en&OS=228&product=3752456&sw_lang=

• How to set default printing shortcut or change standard ones

  I have a LaserJet 2420d with the PCL 5 driver.  Whenever I print, it uses the default paper shortcut that is "General printing every day."  This built-in shortcut specifies a type of "Pre-printed", so the printer breaks waiting for pre-printed paper inserted until I press the check mark button.

  I can create a custom form that has solved the problem, but I don't know how to make my custom form by default for the printer.  Furthermore, if I could change the type of paper for the 'General everyday printing' and save it, it would solve the problem.

  So how set my default paper form shortcut or change the standard one?

  Furthermore, the who Devil set by default to use paper pre-printed paper?

  Open your printers and Faxes folder, right click on the printer icon and select Printing Options. and any changes made here will be defined as a default value.