Photosmart HP 5510: personalized printing

Similar Questions

• Photosmart HP 5510 B111a-printing of Ipads, host names and more!

  Hello

  I have 5 of these photosmart printers installation in various places around our school to allow printing of the iPad 2 that have been deployed to classrooms.

  The problem is it seems to be a way to identify the different printers on the network when printing of you ipads. When I click on print and then select a printer list shows "PHOTOSMART HP 5510 B111a [C95...

  The [C95 corresponds to the first three digits of the host name of the printer, the problem is that three out of five printers have the same first three digits and are all the same displayed as the example above and therefore gives no idea of what printer you select until you print.] Which is not very practical in a school of our size!

  I connected to the HP configuration page using the IP address and changed the host name, but it changed only on windows-based hardware.

  So my question is: is it possible to change the name of the printer to allow me to determine what printer I print from an iPad? If this isn't the case, any other solution would be great.

  Hello

  You can change the identification of the unit of the printer, following embedded Web server:

  1. Access SAP from your browser by using the IP address of the printer.
  2. Enter the network tab.
  3. Enter the network.
  4. Enter Hello.
  5. Change the Name of Service Hello , as required, the updated name will appear on any Apple device.
  6. Click apply to save the changes.

  Kind regards

  Shlomi

• Photosmart HP 5510 series: printer for wireless connection software installation CD

  Hi all

  I need help or advice about the case of the CD of my printer for the configuration of the wireless connection, which is HP photosmart 5510 series. I bought a new laptop, Hp Pavilion Gaming Notebook, which is 10 windows, and when I arrived to set up the configuration of the software printer on my laptop I discovered that it is only compatible for windows XP, Vista and 7, but not 10. I bought this printer about 5-7 years ago and I need to install its software on my computer for fast printing and scanning. So, my question is; "" Of where to install the software?" GOLD " What do I do about the Conference on disarmament, should I go for the customer service and ask for the latest CD or what?'.»» Need help ASAP please!

  Hello

  Thank you for using the HP forum.

  You can download and install the software COMPLETE features of HP printing for your operating system:

  http://support.HP.com/us-en/drivers/selfservice/identify?q=HP+Photosmart+5510+series&tool=s-002#Z7_3054ICK0K8UDA0AQC11TA930O2

  Please select your printer and win 10 OS before you download and install the FULL features software.

  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.

  Hope that helps.

• Photosmart HP 5510: The printer does not print in black

  All of a sudden, my printer does not print in black. I replaced the cartridge with a new black cartridge with the same result. All other colours print fine. I checked the settings on the device and it shows that the black cartridge is full.

  If anyone has had this problem and can offer a solution? Thank you very much.

  In the paper here troubleshooting steps can help solve the black does not print on your Photosmart 5510.  Be sure to check the events on the cartridge, as described in the document.  If you go through all the troubleshooting steps without resolving the question then can help to manually clean the print head as shown in the post here.

• Photosmart HP 6510: Personalized printing HP Photosmart 6510 problem

  I have read through a couple of threads and followed the instructions to turn on 'custom' on my HP Photosmart 6510 all-in-one printing. I loaded the driver of HP Deskjet 450, which finally allows me to select a custom size of 5.5 "x 8.25". I'm trying to print on wedding invitations response cards. Wedding invitations made the same paper 5 X and can be printed without adding a new printer driver for the 6510.

  Now that I can get the printer driver (deskjet 450) to recognize the custom format 5.5 "x 8.25" but I can't print. I use a model of design by Staples and get the following errors.

  Errors - the margins of Section 1 are set beyond the printable area of the page. Do you want to continue? I pushed Yes and the printer tries to print the job abd I get the error "paper mismatch". The printer actually determined the size of the paper when I adjusted the paper tray to accommodate custom size paper.

  Troubleshooting - I tried to adjust the margins, but I have little ability to adjust in the template provided. When I adjusted the margins, I always get the error "paper mismatch".

  Any ideas on how to do more troubleshooting?

  Hello

  Please retry the procedure which should solve the problem below.

  (if the printer is connected with USB)

  Click START > device and printer > add a printer > add a local printer >

  Select "Use existing Port" then Virtual USB from the drop-down menu, click on NEXT, in the production list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

  OR

  (if the printer is networked)

  Click START > device and printer > add a printer > add a local printer > choose "Create a new Port" > type in the printer IP address click NEXT, in the manufacture of the list, select HP / Hewlett-packard and in the right pane, select Deskjet 6980 and finish the wizard

• Photosmart 5510 - cannot print with black just in

  I have a Photosmart HP 5510 e-All-in-one printer - B111a. I am running Mac OSX 10.8.5, running a Macbook pro mid 2012 15 inches. I am able to run Windows 8, but have not tried. I threw the magenta, cyan and yellow. I bought a new black toner cartridge. My printer does not print unless I have the magena, cyan and yellow installed. Is it possible to spend it?

  No, the cartridges must be present.  In addition, if the printer is allowed to sit for a long time with the cartridges removed the "plumbing" may become permanently blocked.

• photosmart HP 5510 vote B11a: noise and Auful printing problem

  Hello world

  I'm new here.

  I have a problem with my photosmart HP 5510 printer, when I try to print it makes a terrible noise and it does not print.

  I try update firmware, reset the printer, change the cartridge, remove all the piece of paper, but nothing.

  Could you help me please?

  Thank you

  Alessandro

  Hi @alessandro96

  I'd love to help you with the sound that you hear from the printer. I understand that you have already begun to solve the problem, but the noise remains. Please post back with the answers to the following questions;

  1. Is the printer on a flat surface?
  2. How long has noisy for the printer?
  3. Didn't help then the noise started? (ie. the paper, printer error message jam was fallen/hit, surge)
  4. There are flashing lights, or the error messages on the printer?
  5. When was the last time that the cartridges have been changed?
  6. If you are a Virgin copy, when you hear the noise?
  7. If you open the printer do you see broken parts?
  8. When opening upward where the cartridges go, they move freely?
  9. The cartridges are installed correctly? (ie. the cartridges are level and does not appear).
  10. Perform a hard reset. With the power on remove power cord from the back of the device, then from the wall outlet. Press and hold the power button for 30 seconds (drains the excess power of the printer). Plug the power supply into the wall outlet, then the printer.
  11. You still get the noise after that?

  I look forward to hear from you.

• 0x6100000bhaving a problem with my photosmart hp 5510 printer... Help

  problem with my photosmart hp 5510 0x6100000b please help the ink tray won't

  Hi, I know that this post has been done for a long time, but I just wanted to check if it is resolved? Do you have a warranty replacement printer?

  Thank you

  Ciara

• Upgrading to windows 7 - does not recognize my printer Photosmart HP 5510

  my upgrade to windows 7, microsoft does not recognize my printer Photosmart HP 5510? I've tried everything

  Try to download the latest drivers from the HP website:

  http://www.support.HP.com/us-en/product/HP-Photosmart-5510-e-all-in-one-printer-series---B1/5053904/model/5053905/drivers

  I suggest you to uninstall and reinstall the latest compatible drivers for Windows 7.

  You can also run the troubleshooting of the printer.

  Open the printer Troubleshooter

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

  For more information, visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

  Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

  You can see the below mentioned links.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

  http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

• Need to download a driver for Photosmart HP 5510 printer.

  I BOUGHTAN PHOTOSMART HP 5510 PRINTER BUT NOT THE INSTALLATION OF A CD BECAUSE MY NETBOOK HAS NO OPTICAL DRIVE. WHAT I NEED IS A GOOD LINK TO DOWNLOAD THE DRIVER, PLEASE HELP. I HAVE TRIED SEVERAL SITES WITHOUT SUCCESS.

  Hello

  Start here http://www8.hp.com/us/en/support-drivers.html

  Don

• hp photosmart 5510 series: photosmart hp 5510 series files are not found

  Hello

  I use the Hp Photosmart 5510 series printer and is faced with a problem where I can not scan from the printer to the laptop. Before having this problem, I used to scan from the printer wireless without any problems, but after I changed my Internet brand and speed, the printer keeps saying "to ensure that the printer software is installed on your computer and this 'scan to computer' is activated via the printer software" even if I have already connected the printer again internet. I have the printer software on my laptop, but it does not work. When I try to click on scan of the computer, the computer used to say "files series hp photosmart 5510 are not found". I tried to change the IP address, but that didn't work either. So I don't know what to do now. Also, I tried to use the USB cable and it worked, who showed me on the printer, I can scan wirelessly or via USB. When I tried with the USB key attached to the laptop, wireless the wireless worked (as well as the USB port), but when I took off the USB cable, it did not work. Help, please

  Note:-J' formatted the laptop and operating system went from vista (original) to the Ultimate, which helped to improve the performance of the laptop. -What is has everything about the problem?

  Welcome to the HP community @Blizzerd,

  I wanted to answer your question to have the printer connect and work on your network wireless 'new '. I think that if you uninstall the printer and reinstall the printer software and continue through to set up the printer on your network, it should work for you.

  Here are the steps for you.

  1 uninstall the printer software, and then restart your PC.

  2. click on this link, select Windows 7 and follow all the steps to install and reconnect the printer: HP Photosmart 5510 and 7510 printers - setting upwards to a wireless network

  Test print and scan and let me know what happens! I hope that does the trick

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

  Good luck!

• How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  How can I connect my Photosmart HP 5510 with my cursor Asus got Tablet?

  The Tablet uses Android 3.2 and I downloaded HP ePrint home & Biz. Also had a pincode and used it.

  The Tablet still shows "printer not found." I have to do something on the printer?

  The printer is connected to a wireless router?  What router?  You've restarted the router?

  You have enabled Web Services from the front of the printer?

• Wireless connection for Photosmart HP 5510

  I can not connect my Photosmart HP 5510 to the wireless network. It detects the wireless network, trying to connect, and then gives that the MAC address filtering message can be activated on your wireless router that can prevent your HP printer to connect. I don't know what to do, please help

  Hello

  Clarify your router brand and model can help provide you more specific advice.

  You can contact your router service provider and check the following settings:

  1. If Mac filtering is enabled in the configuration of the wireless router, make sure to add the printer Mac address as the authorized device.
     You can find the Mac address by printing a Network Setup Page.
     (Menu wireless > wireless settings > print Network Configuration Page [Ok])
  2. If your router's wireless security defined as Wep.
     Check it defined as Auto / Open authentication and authentication unrequited which is not supported by the latest HP printers.

  Kind regards

  Shlomi

• Photo on the 5510 black print cartridge

  I just bought a Photosmart HP 5510 e-all-in-One Printer (B111a).  It doesn't have a crack 'black photo.  Quality of the printed photo will improve if I change the black cartridge for a photo before printing photos black?

  Thank you.

  Hello

  I'm afraid that you can't use the photo cartridge instead of the black print on your printer cartridge. See label install the cartridges or the symbols on the door of the printer when you insert the cartridges. The symbols must match those on the cartridges.

  If you hurt, I guess you get an error of ink.

  Zab

• Photosmart 6510 does not print in black

  My photosmart 6510 does not print in black. I presume that it was the cartridge but I replaced the cartridge and it still does not print. I cleaned the print heads and the cartridge ink levels are full.

  The printhead, cleaning of the screen failed touchscreen printer running.  But when I sat down at my computer and used the program utility printing, he did.  I ran an initial print head cleaning my computer and then clicking the button indicating that the print heads were NOT clean.  He then ran a deep cleansing process.  Then I lined up the printheads of the same print utility program.  Now it works!