Photosmart 5510 - cannot print with black just in

Similar Questions

• Photosmart HP 6510: HP Photosmart 6510 cannot print in black

  Like everyone, I tried all the reset standard and practices of head cleaning.

  Can anyone send me please the new reset instructions?

  Hi @gpn44,

  Welcome to the Forums of HP Support!

  I understand you have a print quality problem with printer HP Photosmart 6510. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like you did a lot of good troubleshooting already. You followed this guide, Printers HP Photosmart 6510 - printer prints blank Page or does not print black or color ink?

  I can send you the steps to perform resets itself, however, I don't think it will do everything for the same problem.

  The cartridge is either dirty, defective or the print head is clogged. This print head is not removable, customer, but if the printer is out of warranty, you can try the steps outlined in these videos.

  This video shows you how to do a manual print head cleaning. I suggest you to watch the two videos before proceeding and use at your own discretion.

  Video: HP 5510 will not print black and color - print head removed and cleaned.

• HP Officejet 6500 a Plus: HP Officejet 6500 a Plus cannot print in black

  I just put new ink cartridges today and now my printer cannot print in black ink.  I've seen some prior positions on the same topic, someone found a solution?

  Try here...

  http://support.HP.com/us-en/product/HP-OfficeJet-6500A-e-all-in-one-printer-series---E7/4083974/model/4083870/document/c03946666/

  Let us know.

• OfficeJet Pro 6835: Cannot print in black

  On printer 6835, no cartridegs are empty, but cannot print in black.

  Hi @Bill113,

  Welcome to the Forums of HP Support!
   
  I see that you are having print quality problems with your printer HP Officejet Pro 6835. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution" if I helped successfully will solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  I understand the frustration you feel. Looks like the black ink cartridge is dirty, faulty or printhead is clogged.

  Please follow the steps in this guide:

  • Color or black cartridge isn't printing
  • Make sure that the printer is connected directly to a wall outlet (do not use a bar or a surge protector). This ensures that the printer is full on and can help this situation.

  If you have completed all the above steps and your product still has a problem, service the product.
  Contact HP for service in all countries except Asia-Pacific.
  First, check your product warranty to check your warranty printer status and then go to contact HP support to find an authorized dealer or to schedule a repair.
  Check the warranty status: http://h20564.www2.hp.com/hpsc/wc/public/home
  Cost of repair out-of-warranty printers may apply.
  What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:
  Step 1. Open the link: http://support.hp.com/us-en/contact-hp
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on options contact HP - click Get phone number
  File number and phone number are displayed.

  Hope that answers your question. Please reply to this message with the results. Thank you for posting!

• My Lexmark S400 prints with black boxes

  Original title: print
  My Lexmark S400 prints with black boxes

  My Lexmark S400 prints with black boxes

  It is still the case?

  If this isn't the case, which happened just before this behavior started?

  What application you are printing from?

  The behavior occurs when you print from other applications?

  Open Printers and faxes, right-click on the icon for your S400 and select Properties.  In the 'Général' tab, click 'Print the Test Page.'  Do you always have black squares?

• HP Officejet 6500 Wireless print with black ink

  HP Officejet Wireless 6500 won't print with black ink. This printer as worked perfectly for years. Now, all of a sudden, he leaves by using black ink. All other colors are working very well. Any ideas?

  I tried several cleanings and reset by pressing on # and 3 when turning the power on. Nothing works, but the ink levels are declining due to all the cleanings trying to get this thing to work.

  I have it!

  I have searched all over the internet for a solution to this problem. Some people have the right idea, but not how to implement it.

  Problem: Black ink doesn't print all colors print but not

  Reason: for black print head is clogged.

  Implementation of solution:

  Set 920 ink jet cartridges in cartridge print head which is held in place by small arm on the right side of the ink cartridges.

  1. remove all the ink cartridges. I didn't want them to dry, so I wrapped them in plastic wrap.

  2. lift the arm and remove the print head cartridge.

  3 rinse the WHOLE print HEAD under a stream of water. I know it sounds crazy, but it will work. I thought it was best to rinse all the (not only black) because if I did not then the ink left any color would dry up and clog in any case!

  4. I leave the printhead to dry for about an hour, BUT IT DOES NOT WORK. When I handed the printhead my 6500 gave me an error message that it could not find the head of printing or something like that. I thought I ruined which was the risk I was willing to take. I went online and searched for a replacement at low prices. I immediately ordered it. But I have excluded the old printhead to dry just in case it is water which made it unnecessary.

  5. four days later I received a new printhead. Before I opened the package I tried the old an new AND IT WORKED! First, I installed the old print head cartridge, then each of the inks. After having done that, the 6500 did the rest. He went on a very long print head cleaning and alignment. He gave me the message "Please wait. Printer preparation occurring. »

  6. when the cleaning and alignment end it automatically prints a test page. It didn't look perfect the first time, but it was close. The message I got was, 'success. Alignment with success. Recycle or discard the printed page. Press Ok to continue. "The problem was that the ink cartridges were emptied of this whole process, even though they had about half of the ink when I removed them left. I changed the ink cartridges and did a cleaning and a level 2 cleaning and alignment. It worked!

  7. because I could not return the new printhead that I am now in case of failure of the print head for another reason.

  I don't know how long it will take to dry print head after rinsing but I know works of 4 days. Perhaps a few days would have been sufficient. If someone does and less time please let others know here.

  If you don't have success using my method, at least you know it will solve a new printhead. I paid about $35 for a new.

  Good luck!!

• I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

  I get a message that says... your version of internet explore is obsolete to run the latest XML parser. I cannot print with my printers. I have a XP SP3, 5 years old. It's time to upgrade to windows 7

  What version of IE are you using?

  The current version is IE8 - http://www.microsoft.com/nz/windows/internet-explorer/default.aspx

  IE9 (is still in beta).

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• How to choose a print with black ink only on the Office Jet Pro 8600?

  How to choose a print with black ink only on the Office Jet Pro 8600?

  Please read this post then provide some details.   What operating system? For Windows 7, the setting must be in the Advanced tab as shown below.  Note that color ink may still be necessary to avoid that the print head clogged, see here for more information.

  

• Cannot print just black and white - cannot print all black when a low cartridge

  I had this 6700 Officejet just long enough the warranty has expired. Go figure. I have 2 problems.

  1. from my PC, it will print not just black and white, even if I chose "printing black and white only. I have to go through the whole syetem of dialogue ect ect, which is delayed. It prints perfectly just black and white of my portable Macbok.

  2. it won't let me print a document all in black and white, because I have a low color cartridge. Whey do I have to have color cartridges to print just a black and white document. Very annoying and frustrating. I'm almost ready to use as target.

  Hi fpsolutionsllc,

  Welcome to the Forums of HP Support! I understand your frustration and want to enlighten us and also bring some answers to your questions about the ink on your HP OfficeJet 6700 systems.

  1. you are able to go to your printer properties and change your settings for printing in black and white only, without having to change it whenever you want to print something. See the steps listed below:

  * Go to your devices and printers

  * Right-click on your 6700 and select Print Options

  * Select your desired default and press Ok

  2. you cannot print without all cartridges installed because even if printing black and white printer will still use the ink contained in the cartridges of color for maintenance tasks. It takes little ink from all cartridges in the service of the print head and avoid any clogging. To get a better understanding of take a look here: use of inkjet printers ink.

  I've found this useful information here: a 'ink alert' or "Low on ink" Message appears on the computer or the printer control panel

  Thank you

• Photosmart b109n cannot print in color black

  I have a Photosmart b109n. I tried to print a bunch of images and half of the images was good, but the other half was very strange. As you know a printer when it prints a picture, it makes all the colours of yellow, magenta and cyan, even in the dark. My printer can print colors perfectly but cannot print black parts on the image. It's a gray a little something. Here's an example of what it's like (the grey parts had to be black):

  My mystery is now solved. My statement was false, that the printer uses the black cartridge when it is printing photos. So the real problem was that the black ink cartridge.

• Using a Photosmart C310a cannot print photos from the photo paper tray. With the help of Mac Lion

  When you print photos using a C310a Photosmart on a Mac with Lion. I cannot print on paper photo from the photo tray. It keeps or by default in the paper tray.

  Any suggestions

  Hello...

  Please try these steps... it might solve your problem...

  1. go to mac apple icon-go to the software update - pls download and install the update.

  2 restart the pc - and then go to the new apple icon - go to System Preferences and continue to print and scan

  3 Higlight your printer, then click on the button "-" to remove the printer-if your connected USB printer please unplug USB cable - then restart your pc

  4. after the restart, return to icon - system preferences - apple print and scan-for usb connection: plug the USB - if your printer does not automatically appeared on list of the printer olease, click plus the sign and Higlight your printer then click Add button - after that - to prove the fucnctionality

  for a wireless connection - simply click on the sign more, then, HELLO - Higlight your click and select printer Add button - then prove the functionality if you can print and scan.

  Hope it will work for you...

  Please click on that button KUDOS if I solved your problem... Thank you! more power! =)

• Cannot print with Windows 7 and Photosmart 7350

  Hello. Recently, I converted my laptop to Windows 7 Home Premium OS. I have no problem printing to work with this computer of our HP LaserJet but when I enter the problem starts. I have a wireless home network with my Photosmart 7350 connected to my desktop computer that is still running XP. The wizard sees the printer and adds but cannot print a test page. He says that it is waiting, then the print job disappears. I downloaded the Vista driver for the printer. When I run the troubleshooter, it cannot determine the problem. No surprise as convenience stores rarely did help. I got around the problem by sending documents to the desktop so far and then print it from there, but it gets old. Any ideas?

  Please install the printer on Windows 7 by using the following steps:

  http://support.HP.com/us-en/document/c01796821

• 3210 all-in-one - cannot print with the black cartridge with 2 empty color cartridges

  have 2 empty color cartridges - and print in black only (up to get the new cartridges) - any ideas?

  Brigadoon wrote:
  have 2 empty color cartridges - and print in black only (up to get the new cartridges) - any ideas?

  The Photosmart 3210 printhead a permanent.  You will need to have available in any color ink not to damage the print head.  Your only option is to get the refill for empty ink cartridges.

• Photosmart 5510 not printing and noises when toggled or asked to print?

  About 6 months ago, we purchased our printer HP Photosmart 5510 alongside our Touchsmart computer, and so far, both work fine.

  However, there are a few weeks at random, when I sent a document to print, the printer started making a very loud noise, sounding almost as if he was that something stuck in the back there. Only to make the noise stop, I cancelled the printing and has turned off, which again triggers intense noise. This back on once again, he made the same noise and, before moving on to the usual display a notice on the monitor of printer flashed by saying that the device had extinguished itself incorrectly.

  It lasts for a few weeks now, and after having scoured your Web site for all the details, I couldn't find anything on this issue. After detecting that other factors may have come into it, I watched some of your videos on how to fix etc. paper jams. After pulling some paper in the back, I thought the culprit of all this, the message on the monitor said he had a 'ink cartridge problem' or could not detect the paper, even if we just replaced the ink and I have to reload the paper. I watched the videos of these two problems troubleshooting and tried 20 seconds thing etc, but nothing worked.

  Really, I'm so frustrated and I would like a little help from a very kind person out there?

  

  Hey mollycat,

  It seems that there is a problem with the power of the printer mechanism paper.  If the unit was loud noises, then it might be a part out of alignment or a piece of paper caught in the unit.  However, you mentioned the continuation of the measures is stuck, remove the paper, and now the printer gives error ink system.

  I will provide documentation of troubleshooting below for the two issues, but if these steps don't erase the question then I would advise to contact HP Technical Support on this printer.  Is it is only 6 months old, then it would still be under warranty by the original manufacturer.

  An "Out of paper" message on the control panel and the all-in-one doesn't pick up paper

  An alphanumeric Code (example: ' 0 x 'r' C2...) ") or 'Ink system failure' Error Message is displayed on the front panel when printing

  To contact HP Technical Support: contact HP worldwide | HP

  Hope this helps,

  Jason

• OfficeJet Pro 8600 Plus exemplary prints with black streaks

  I just bought a HP Officejet Pro 8600 Plus and it seems to work perfectly when printing; However, when I tried to copy something, the copy came out with black streaks that close to unreadable printing and are more dark/concentrate toward the left side of the page.

  How can I solve this problem?

  @Imagehappy, you have the more than 8600 or a different version of the 8600?

  The reason for the question is because I want to give you a link to update the firmware.

  Also, do not forget if you can find one of my post useful or want to say thanks don't forget to click the White Star under my name to give me congratulations.

  I really appreciate it!

  Thank you!