Photosmart like unable to connect wireless to Linksys WAG54GS

Similar Questions

• Unable to connect wireless DNS server is not recognized.

  My laptop won't connect wireless does not have the DNS server has never had a problem before

  Hi Roger,

  Thanks for posting your query on the Microsoft Community.

  According to the description of the issue you are unable to connect wirelessly because there do not recognize the DNS server. The problem may be caused, if there is a miss match the IP address configuration. Then, I suggest you to try the steps below and see if it helps you to solve the problem.

  Method 1

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Method 2

  If the problem persists, I suggest you to release and renew the IP address. For this you can see the steps below.

  1. Go to Start, click all programs and open the Accessories.

  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. In the command prompt, type the following command and press ENTER:
     enough ipconfig and press ENTER.

  4. Then type ipconfig / renew and press ENTER.

  5. Type Exit and press ENTER.

  Method 3

  If the problem persists, try to reset the TCP/IP stack and see if it helps you to solve the problem. To reset TCP/IP, you can refer to the procedure described in the article mentioned below. If fixit does not help, try to follow the manual steps.

  How to reset TCP/IP using the NetShell utility

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• Unable to connect to secure linksys WRT54GS2 V1 wireless router

  I just moved in with my friend and I'm unable to connect to linksys WRT54GS2 V1 wireless router.  My roommate can connect his computer laptop and desktop to the wireless router, but my iphone and the laptop cannot connect.  I tried both of my devices on a wireless network to a friend, and all both worked well.  We even changed AND removed the password and it won't let me log on to internet.  I went through the forumns and FAQS on the site, looking for suggestions.

  Thank you

  Are you MAC to your iphone and laptop addresses in the filter?

• Photosmart 7515: Impossible to connect wireless to Photosmart 7515

  First of all, the printer worked before end of June when a patch Win7 crashed and I had to reinstall the operating system. I immediately upgraded to Windows 10; I am running anniversary of Windows Update (AU). I don't have reinstall the printer before last night. I am running Windows 10 a a full charge 18 Alienware. I am writing from this computer so I'm connected to the Internet and I'm connected wireless.

  I download the updated 2016 (PS7510_1315 - 1.exe) displayed for my printer and installed it, but when it came time to connect to the printer, it didn't - do not see the printer.

  I've reconfigured the printer twice and during each installation, the printer sees all networks wireless (including me), I select my network, the printer asks the password of my network and then it connects successfully to my SSID. I print the results of the wireless network Test with the bottom line of "no problem found" for the correct SSID. My computer is connected to the same SSID. On the printer, the blue wireless light is solid on and signal strength is displayed on the printer shows also strong.

  I then connected to my router and updated all the connected systems. The display shows four wireless devices, one being the printer. The printer didn't show the MAC address, not a name or one IP address like the other three, then I restarted the routed with the same results. Then, I opened an OS command window and ping the IP address - failed with "request timed out" and "destination host unreachable".

  So, I'm looking for help. The printer says that it is connected properly wireless with intense beep and a DHCP IP address which is also in the appropriate interval. I also tried the host name: dhcppc3 and that did not work (didn't expect really, since the INVESTIGATION period did not work but I wanted to be thorough).
  In advance, thank you!

  Nick.

  Hi @LoneRider,

  Thanks for joining the Forums of HP Support for a solution to your connection problem.

  I understand you're rying to connect a HP Photosmart 7515 e-all-in-one printer wireless to a computer Windows 10, but the installation failed because he wasn't able to find the printer. I would like to help with that.

  Here is a document of support designed to be used with this problem - printer not found during Network Driver Setup (Windows).

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• I am unable to connect to the Linksys WRT54G Router with wired connection to Office XP.

  My two laptops (XP and a Win7) will be connected to the router wireless and wired (ethernet). When it is plugged directly into the DSL modem, the Office connects and works very well. This problem started when I had to replace the DSL modem.

  I inherited this problem for my elderly mother... and it all started because they gave me the router password wrong, who now works (router has been reset) on two laptops, but when connected, the Office doesn't even show a light of connection on the router except during startup. I no longer get a window of logon passwork for the router, and I am unable to connect/ping the router in the office. (192.168.1.1)

  I would like to clarify a few things.

  1. two laptops work fine with cable connections and wireless through the WRT54G.

  2 desktop PC, which has only a wired connection, does not connect successfully.

  3. the symptoms of the failure of the desktop connection to are that the link on the router at the start light flashes during initialization of the PC but then will Dim.

  4. when the desktop PC trying to connect to the internet, it fails.

  5 when the desktop PC try to connect to the administration WRT54g page it fails.

  6. when the desktop computer try PIING the router at 192.168.1.1 IP address it fails.

  These points are correct?

  Assuming this is correct, open a command prompt and type

  IPCONFIG/ALL

  The output of the command should provide some information about the current state of the network connection.

  It would be useful that you posted this here release.

  The absence of a link light can be your main symptom and may be due to several reasons. He probably has an associate status "media disconnected" in IPCONFIG for the network connection.

  This could be caused by a bad network cable or a network connection disabled in the properties of the network on the PC. Small jets knowing the ot IPCONFIG output is would help more.

  Post this info if you can.

  Good luck

• I am unable to connect wirelessly with my new laptop. He always tells me to try to reset the router, but it does not work.

  original title: I'm unable to connect my new laptop...

  I'm unable to connect my new laptop which has a 802.11n modem to my router Linksys 2.4 GHz 802.11 g wireless. Try troubleshooting and it tells me to reset the router. Help...

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

• HP Photosmart 7520 unable to connect to Web Services

  It's used to work. Now when I try to scan to e-mail, I get all the way to where I choose it as a Document and then I get the message "unable to connect to web services. I printed out the results of the wireless network Test and everything looks great. Also, the Configuration of the network page is superb. My name network, says it is connected to the Internet. I was able to download the updates. IP address looks right.

  I have downloaded and run printing HP and doctor Scan and it crashed.

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: HPDiagnosticCoreUI.exe
  Application version: 3.1.0.25
  Application timestamp: 50fd3a60
  Fault Module name: dlbxtwds.ds
  Fault Module Version: 3.107.0.0
  Timestamp of Module error: 45df4cd1
  Exception code: c0000005
  Exception offset: 00004da2
  OS version: 6.1.7601.2.1.0.768.3
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  @shoikh

  I understand that your printer is not connected to the web services.  . I would first disconnect the router and the printer for about 1 minute.  I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select Network (IP) address

  6. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply you could get a fair warning select OK.

• Unable to connect wireless, error - could not connect to the internet

  Original Title - connect wirerlessly

  I can't connect to the internet via my wireless router? When I check the availability of networks, the signal is as strong as it gets. However, as soon as I log in, the force goes to far and he says: "Unable to connect to the internet" the distance between the router and (computer) is from 25' to 30'. Any help be greatly appreciated. Thanks in advance

  Hello

  As a first step put the computer near the router and start with the security off the coast.
  When it works, take it back to the final spot. If it stops then working, then you have a problem of distance.

  In general

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Wireless modes - http://www.ezlan.net/Wireless_Modes.html

  Wireless bridging - http://www.ezlan.net/bridging.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Unable to connect wireless integrated Touchsmart IQ506 to Netgear's WNHDE111 Wireless - N Access Point

  I have a new HP Touchsmart IQ506 and the experience has been very positive with one exception: the Wireless-N networks.

  I bought a Netgear Wireless-N reduction kit.  I am able to see (in the Vista network and sharing Center and available networks), using the Netgear Wireless-N USB adapter Netgear WNHDE111 Wireless-N access point provided with the Touchsmart IQ506 and connect to it without problem.  But I am unable to connect directly to WNHDE111 with Wireless-N adapter integrated the IQ506 (on the HP Touchsmart IQ506 or on another PC with the Wireless-N support, a Sony Vaio NS150 computer).

  Ralink 802.11n adapter indicates that "working properly" in the Device Manager.

  Am I missing something?  Are there instructions on how to connect the IQ506 up to an access point Wireless N with the built-in wireless adapter?

  
  

• Unable to connect wireless to the Internet - Atheros - HP Pavilion dm3-1035dx

  Hello

  Laptop: HP Pavilion dm3-1035dx

  I just formatted the computer and the software has been reinstalled. I have the latest Atheros on the Site of HP drivers.

  I'm unable to connect to wireless internet, despite what I do. I will try to connect to a network, and it will then show with the little yellow Triangle showing limited access.

  Troubleshooting of the shows "wireless network connection is not a valid IP configuration [not not fixed]" and "[detected] problem with wireless adapter or access point.

  The wireless router is 2.4 GHz (B + G). Security is WPA2 (AES).

  Once I have disable the security for the wireless router I am able to connect to the internet. However, once I got change back to WPA2 (AES) I can no longer connect.

  I have crossed the wires and haven't found a working solution. If I could get help that would be greatly appreciated, thanks.

  Fixed a problem.

  Don't know what he did but the wireless connection is working now.

  I turned off my windows firewall. I disabled the router security and was able to connect to the internet.

  Then back to WPA2, the connection has failed.

  I tried ipconfig / renew ipconfig/release in commmand invites a few times and ipconfig/release would not work ("..") Unable to contact your dhcp server...). However, after several attempts more to play, I was able to connect wirelessly with WPA2 and windows firewall on.

  Ipconfig displays now, 192.168.0.1 and not 169.254.61.203

  Please help us Erico

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Unable to connect wireless on Satellite L300D-13 s

  Bought this new laptop Satellite L300D-13 s
  The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

  Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

  Hello

  The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
  So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
  Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
  Also make sure that your router supports standard WLan even as the WLan card.

  Welcome them

• HP photosmart 7520: HP photosmart 7520 unable to connect to web services

  I am also having this problem. I tried the solutions above. Can you also send the solution for me?

  drzman1

  Welcome to the Community Forum of HP.

  I don't know that to which you are referring - he could be the following:

  By PrintDoc Web services

  PhotoSmart 7520 does not connect to "Web Services"

  You can take a look at the suggestions already provided - they are likely valid for your situation.

  I can also offer you the following:

  Reset Web Services in ePrint printer

  • A method essentially provides the procedure that you find in PrintDocof wire,
  • Two method explains one more 'standard' reset Web Services approach.

  ============================================

  If you are in the USA or the Canada, you can call using Cloud Services.  I suspect that they can help during normal hours, but you can certainly call anytime and see if help is available:

  When to call HP Cloud Services and when to call HP Tech Support

  Click on the thumbs-up Kudos to say thank you!

  And... Click on accept as Solution when my answer provides a fix or a workaround!

  I am happy to provide assistance on behalf of HP. I do not work for HP.

• Unable to connect wireless after changing Internet providers, error res://ieframe.dll

  I just got AT and T U-verse, and now I can't connect wirelessly. I tried to reset the router, but that did not work. I get error res://ieframe.dll I currently have Windows XP and IE 8. I can connect through the LAN, but not wireless. Help, please

  Hello

  You have made no changes to the computer recently?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Problems in Windows wireless and wired network connection: http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows

  Method 2:

  Check the proxy server settings are turned on. To do this, try the following steps:

  a. disable the proxy on Internet Explorer (IE)
  b. Click Start, type inetcpl.cpl and press to enter.
  c. click on the Connections tab, click the LAN Settings button.
  d. uncheck "Use a proxy server for your LAN" under proxy server.
  e. click ok to apply the changes.
  f. open Internet Explorer and check if the problem persists.

  Method 3:

  Try the following steps and try to serve DNS renew IP address and check if it helps.
  a. Click Start. Type cmd in the search box and press ENTER.
  b. at the command prompt, type the following command and press ENTER:

  enough to the command prompt ipconfig and press ENTER
  ipconfig / renew in command prompt and press ENTER

  c. close the command prompt and check if that helps.

  
  Method 4:

  Run the System File Checker and check if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  
  Method 5:

  Re-install the wireless network card drivers and check if it helps.
  How to change or remove a program in Windows XP: http://support.microsoft.com/kb/307895

• Unable to connect wireless even though we have the right key wireless.

  Wireless

  We have an acer one happy and we can connect to the internet by cable, but although we have to correct wireless code, we can not connect to wireless. Our other laptop works fine with the same code. Please can you help me?

  Hello

  1 did you change on your computer before this problem?

  2. you receive an error message?

  3. what exactly happens when you try to connect wirelessly?

  Follow the suggestions and check if that helps.

  Method 1

  You can update the latest wireless adapters.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  You can follow the procedure under article

  Problems in Windows http://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows?T1=tab04 see also wireless and wired network connection: solve problems, find http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-finding-wireless-networks wireless networks