Photosmart 7515: Impossible to connect wireless to Photosmart 7515

First of all, the printer worked before end of June when a patch Win7 crashed and I had to reinstall the operating system. I immediately upgraded to Windows 10; I am running anniversary of Windows Update (AU). I don't have reinstall the printer before last night. I am running Windows 10 a a full charge 18 Alienware. I am writing from this computer so I'm connected to the Internet and I'm connected wireless.

I download the updated 2016 (PS7510_1315 - 1.exe) displayed for my printer and installed it, but when it came time to connect to the printer, it didn't - do not see the printer.

I've reconfigured the printer twice and during each installation, the printer sees all networks wireless (including me), I select my network, the printer asks the password of my network and then it connects successfully to my SSID. I print the results of the wireless network Test with the bottom line of "no problem found" for the correct SSID. My computer is connected to the same SSID. On the printer, the blue wireless light is solid on and signal strength is displayed on the printer shows also strong.

I then connected to my router and updated all the connected systems. The display shows four wireless devices, one being the printer. The printer didn't show the MAC address, not a name or one IP address like the other three, then I restarted the routed with the same results. Then, I opened an OS command window and ping the IP address - failed with "request timed out" and "destination host unreachable".

So, I'm looking for help. The printer says that it is connected properly wireless with intense beep and a DHCP IP address which is also in the appropriate interval. I also tried the host name: dhcppc3 and that did not work (didn't expect really, since the INVESTIGATION period did not work but I wanted to be thorough).
In advance, thank you!

Nick.

Hi @LoneRider,

Thanks for joining the Forums of HP Support for a solution to your connection problem.

I understand you're rying to connect a HP Photosmart 7515 e-all-in-one printer wireless to a computer Windows 10, but the installation failed because he wasn't able to find the printer. I would like to help with that.

Here is a document of support designed to be used with this problem - printer not found during Network Driver Setup (Windows).

Please let me know if that solves the problem, or if you need assistance.

Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

Thank you!

Tags: HP Printers

Similar Questions

  • HP 15-r211na: network drivers not install it so impossible to connect wirelessly to the internet

    I just bought the HP notebook 15-r211na and cannot install the network drivers.

    Initially, the network drivers do not appear to be installed on the laptop as when I went to the device, under 'Network adapters' Manager, the only thing that he was 'Realtek PCle FE Family Controller.

    Since then, I have connected the laptop to my router via an ethernet cable and tried to download and install six network drivers on the site of hp for this laptop, but this did not succeed because it made no difference.

    I did it by using the following link: http://support.hp.com/gb-en/drivers/selfservice/hp-15-r200-notebook-pc-series/7486447/model/7633564

    Do you have any ideas on what to do next?

    Thanks in advance.

    You are the very welcome.

    If your laptop is still under warranty, contact HP technical support to the country that you live in the link below.

    http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

    While I'm not a training or trade PC repair technology, your screenshot shows no evidence of any material without wire being installed - with or without a driver.

    The most likely cause would be the wireless card has failed and must be replaced.

  • HP Photosmart B109n-z can not connect wireless

    Sorry for my bad English (I'm from Belgium)

    I bought a Hp Photosmart printer and I can't connect to my router!

    I tried severell times, but nothing has worked

    I did everything as in the video and when it tries to download router configuration message appears it can not find the

    the router and the SSID.

    Networksetup program is allso connect to my router (even with the right user name and pasword)

    Allso the program USERHPNDU cannot find anything (no SSID, no WEP, no printer key)

    My pc is connected to my router with an ethernet cable. The system is win xp home sp3

    Router Linksys WAG160N IP is: 192.168.1.1

    I even disabled my firewall and no go!

    Networkconfig page: any IP address

    TestPage wireless network:

    -Wireless on: pass

    -Wireless function: pass

    -SSID: failure

    -Security: pass

    -connected: unfinished

    signal strength: not completed

    On the bottom of the page networkconfig is printed that he had found the SSID of my network!

    Now, my printer is connected to a print server and works fine but I want to connect wireless!

    What is the solution?

    Thanks in advance,

    Paul

    Thanks for your suggestions; It solved my problem

    changed from WEP to WPA and it works

    Thank you very much

  • HP deskjet 3520: impossible to connect my HP 3520 wireless

    I changed ISP broadband yesterday, and I have a new router - my printer not connecting wireless now. I tried to restore the values by default, still no solution. Can anyone help please?

    Hello

    Is there a mistake while the printer connects again router? and have you tried to use the HP Print and Scan Dr. on the link utility?

    Please provide more information like router brand and model.

  • Unable to connect wireless printer

    Using OS 10.6.2 and Photosmart C8180 All-in-One

    Impossible to connect the computer to the printer. Printer shows with wireless assistant that it has the correct network (SSID). However, no connection is.

    Deleted the printer (as shown) on the page of the utility. Now, no printer is emerging.

    Right-click on the rectangle on the left (just before the + and - buttons) and select "reset Printing System".

  • Satellite L500 - 1WG PSLS0E - impossible to reconnect wireless

    * Computer info: *.
    Satellite L500-1WG - Partnummer: PSLS0E-07502EN5

    Windows 7 Home Premium

    The drivers are up to date:
    -Microsoft Virtual WiFi Miniport Adapter version - date driver 21.06.2006 - 6.1.7600.16385
    -Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC - 30.07.2010 driver date version - 2017.2.730.2010
    -Realtek PCIe FE Family Controller - 23.06.2010 - version 7.23.623.2010 driver date
    I disabled the "allow the computer to turn off this device to save power" for all 3 of them.

    * Problem: *.
    When I start the pc, it connects to my wireless router as usual, but then after that 30-60 minutes it stops working. He always finds the wireless router and the signal is excellent (4-5 bars), but when I try to connect it gives me the error message that it is impossible to connect to my router.

    If I restart the PC, it is always impossible to connect.

    But if I turn the computer completely off and leave it for a while, it works when I start it again, which suggests that he may need to cool (we noticed that the computer is warm enough, and that the fan is spinning a lot... but that could have been the same before - just that we it has not noticed that it was not a problem)

    ... But if I only it hibernates and let it cool for a while, it does not work to reconnect when I start again.

    I did a test earlier: I started the computer and made sure the wireless connected - then I put into hibernation and he did it again, and after that, he was still unable to connect. Then I stopped had and turned on the right now - and then it works fine.

    It's the same question at the local library, but my in-laws it worked fine for 2-3 hours the other day.

    My other pc that runs on Ubuntu, works without problems on our wireless.

    Any ideas?
    -Is it a virus?
    - Or my card network is not able to take the heat (material)?
    - Or is this a bug of Windows/driver (software)?

    I plan to reinstall windows, but before crossing with whom I was wondering if it's worth the hassle... Is it a hardware error, and should I just go directly to the seller?

    What you can try is updated the BIOS. Latest version is installed on your laptop?

    Another question: where you find WLAN driver version 2017.2.730.2010?
    Toshiba's latest version 2015.1.0427.2010?

  • C310a does not connect wireless to Macbook Pro.

    Lion downloaded and used successfully for a month.  Has taken my Macbook Pro on the road; now impossible to connect the printer wireless.  Thoughts?

    In fact, when all else failed, I unplugged by cable modem, router (Apple Airport) and printer.  Full solved first reboot the problem (for the things I tried, anyway).  So far so good, thank you for your offer of assistance.

  • How to restore the connection wireless internet?

    Impossible to establish a WiFi Internet connection.


    Laptop can only connect via LAN. Connection Wi - Fi deleted while surfing online. don't know how to restore the connection.



    Hi WeiShangSing,

    To set up a wireless connection on Windows 7 computer, I suggest you to refer to section of the online help and check if it helps.

    Setting up a wireless network

    http://Windows.Microsoft.com/en-CA/Windows/setting-wireless-network#1TC=Windows-7

    If you use a wireless router, you can also see this link for help:

    http://Windows.Microsoft.com/en-CA/Windows/set-up-wireless-router#set-up-wireless-router=Windows-7

    If you are having problems with the connection Wireless to the computer please answer back with error message. If you need help, I'll be happy to help you.

  • Causes of alphanumeric password iPhone SE keybord problem often react not so impossible to connect IOS 9.3.2,and so I went back to the code number 4

    Causes of alphanumeric password SE iPhone keypad problem often react not so impossible to connect IOS 9.3.2,and so I went back to the code number 4

    What is your question?

  • Toshiba AT200 refuses to acknowledge my connection wireless home

    My AT200 refuses to acknowledge my connection wireless home.
    1st time, that he could not recognize, I restarted the broadband system and then recognized.

    Now he just continues to scan and will not find the connection?
    I tried to manually force but he said that it is not in the range - even when I'm standing right next to the box.

    This is a major issue - what is a Tablet without wifi connection - right?

    > Is there a way to reset to the factory settings?
    To reset to factory settings Android, go to:
    Apps-> settings-> privacy-> data reset > reset compressed-> clear all

  • Can connect wireless Compaq Presario SR5214X desktop PC?

    Hello

    I have a Compaq Presario SR5214X desktop PC. Can I connect wirelessly to the network with it? Have you looked online and I refuse to pay support to meet a simple Y / question N can I connect wirelessly to my router?

    Concerning

    Hello

    Your PC does not come with a wireless adapter, but you can certainly install one in a free PCI slot: these are the white horizontal slots shown in the bottom left of your motherboard is an example of the type of card, you need to install on the link below.

    Wireless PCI card

    Kind regards

    DP - K

  • Unable to connect wireless on Satellite L300D-13 s

    Bought this new laptop Satellite L300D-13 s
    The wireless doesn't seem to work, are the switch and the light and the device manager says theres nothing wrong with my hub driver seems to work very well with my laptop more old etc so I think as my hubs ok. Is it a commen problem?

    Its a BT home Hub so this is useful and if I use the cable between the hub and the laptop it works very well and connects to the top with a problem, please help

    Hello

    The laptop supports Realtek 802.11 wireless network card b/g, but it has not been equipped with BT module.
    So if you want to connect wireless you must first activate the WLan on your laptop computer (WLan switch on IT and FN + F8).
    Then it must be set up correctly using the right SSID, wireless encryption, Mac address, etc.
    Also make sure that your router supports standard WLan even as the WLan card.

    Welcome them

  • Office Jet 4620: Connect wireless printer without USB cable

    I have a desktop HP 4620 jet.  He was hanging in my old router.  When I tried to join software router again asked me to use a USB cord.  I do not have a such cord for this printer and want to set using the wireless, but sofeward me continues to send at the option of the cable.  The router is ATT U-verse.  I need step by step instructions on how to connect the wireless printer.

    Thanks for any help.

    Hello

    HP Auto Wireless automatically sets the printer without connecting it to a USB port, only if your computer is also connected wireless to the network. If your PC does not have wireless connectivity USB cable would be necessary, except if your router supports WPS.

    If your PC is connected wireless to the router, restore the pritner as follows:

    1. Click on the WiFi the printer button and select restore network settings, confirm and invites.
    2. Click on the Setup (wrench) and select Tools, then restore the default settings and confirm any command prompt.
    3. Turn the printer off and turn it back on
    4. Open the HP Officejet 4620 software and follow the instructions to connect a wireless printer.

    Another option would be the WPS Pin Code or button WPS, if your router supports supported such a, tap the icon on the printer wireless and select WPS or Wireless protected Setup, follow the steps on the screen, press the button of your router or a PIN code, see the documentation for your router to check the capabilities of WPS.

    If none apply to your PC printer or yout, use a wireless computer connected or get a USB cable for the installation of hht, so a cable was supplied with the printer.

    Kind regards

    Shlomi

  • 5532 ENVY: ENVY 5532 has a connection wireless but not recognized

    My printer is showing a Wi-Fi connection (the light is solid and blue).  I ran a test report and all past with a very good signal quality.  When I try to print from my laptop or iphone, I get a message indicating that the printer is not connected (on my laptop) or no airprinters (on my iphone).  Before last night, everything printed fine.  You can provide any assistance is greatly appreciated.

    Hi @shaunaB44,

    Welcome to the HP Forums!

    I noticed that you can not connect wireless printer HP Envy 5532 for your Mac OS X 10.10 Yosemite. I'm happy to help you with this problem of connection!

    To confirm that your printer hardware is working, you are able to print a test page from the printer control panel? Video: print a test page.

    You see error messages on the display of the printer?

    In the meantime, try the steps in this guide, "printer offline" or "printer not responding" Message (OS X). And let me know what happens!

    If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

    Hope to hear from you soon and thank you for posting!

  • Re: Disabled the connection Wireless on Win 7 - Portege R600

    I installed Windows 7 (new installation) on Toshiba Portege R600 laptop and the built in 3 G modem does not work.
    When I run Toshiba Wireless Manager, he wrote "the Radio is off. To activate, activate Mobile switch. ».

    I'm sure that this switch is on, but pass connections wireless using Fn + F8 does not work then maybe it is off but I can't allow it. I have installed all updates of drivers such as: Wireless, Wlan driver manager.
    BT Stack, etc.

    Does anyone have an idea?

    Hello

    Wait a minute;
    You want to activate; Modem WiFi or 3G?
    Please note that WiFi is not 3G modem.

    Don't forget that you have chosen and activated the modem 3G and not the WLan.

    Welcome them

Maybe you are looking for

  • Firefox will not even try to load some website...?

    He won't even TRY to GO to Neopets.com Web sites and has no error message... He stayed there and not going again. It just does nothing. Sits there like a lazy browser. It's as if he hates IMVU. And when I search it on Google... It ' white-out'd ' the

  • On Satellite A100-253 CD player problem

    Hello I have a problem with my disc drive (Toshiba MK1032GSX).When I introduce a CD - R with no data (empty), I have this error message: E:\ ' is not accessibleIncorrect function ". in English: "E:\ is not accessible.Incorrect function ". But when I

  • P310 and SCCM 2012 R2 questions

    Hello everyone We have just received the new Thinkcenters P310 and we were tring to the image using SCCM 2012 R2. We import the driver for the card in the bootimage and it gets the IP address and load to the top of the SCCM screen and then when it ge

  • Neden bir sonraki sefere Apple edilen ki edeyim?

    Merhabalar, 17 Kasım tarihli İmac siparişim Island iligili yaşadığım paylaşma ihtiyacı duydum problemi. Umarım benim ve customer hizmetlerindeki arkadaşların tum cabalarına rağmen varolan prosedurun bu konuda bir Çözüm bu getirememesine paylaşımım ya

  • Y at - it a shortcut to activate bluetooth?

    Y at - it a shortcut to activate the bluetooth on and outside without going through the drawer of applications, settings, etc. ? My original Droid came with a handy app that I put on the home screen. He appeared as a bar with the rotation buttons blu