Photosmart wireless = FAIL work more B-210

Similar Questions

• Photosmart wireless 6510 works very well, but how now to enable web services & eprint?

  New wireless photosmart 6510 works well with my laptop (Windows 7) to home & router; How can I activate the web & eprint services NOW? During the initial installation, I was short of time and I think that the antivirus intervened and I don't have a printer email address. He said that I could do it later - how? When I use the Web Services Panel to printer it tells me that I am not connected to the server.

  Is there a pure easy way to add web services now without upsetting my wireless network settings?

  bjhulse22,

  The steps below a usually resolve the problem you are experiencing:

  1. unplug the power cord at the back of the printer.

  2. unplug the power cord at the back of your router (and the modem, if they are separated from the router).

  3. wait 20 seconds, then plug the router (and the modem, if necessary) in.

  4. wait for 30 seconds, then plug the printer back and power.

  5. press the button on the front of the printer ePrint, and it should try to connect to Web Services again.

  These steps usually fix the problem, but if it persists, you can try definition of network information static for the printer (which is sometimes useful to stabilize the ability of the printer to get outside of your network to the internet):

  1. print a Configuration Page from network network printer or wireless menu.

  (Select the wireless icon, select 'Settings', select "Display Network Configuration", select "Print Info")

  2. open a Web browser and type the IP address of product (from the network Page of Configuration) in the address line. The HP - Embedded (EWS) Web server should open.

  3. click on the tab 'Network' (in the top menu), then click on the 'Networking' link (in the left menu), then click on the link "network address (IP).

  4. click on the small round button next to the "Manual of intellectual property", then fill in the fields with the information from the Page of Network Configuration (IP address, subnet mask and default gateway).

  5. under "Setting up the DNS addresses", fill in the fields with the following text:

  -Preferred DNS: 8.8.8.8

  -Alternate DNS: 8.8.4.4

  6. click on the "Apply" button and the settings must be updated. Once the settings are updated, turn the printer off and then back on.

  7. try to reactivate Web Services.

  Let me know if you have any other questions, please!

• Printers HP Photosmart 7515: Efax works more on printer

  I have a HP Photosmart 7515.  EFax ability no longer works on the machine.  Has their been a software change or update to HP or Efax which must be installed to make it work again?

  Hi @hapstersmom.

  Welcome to the Forums of HP's Support. I want to help your PhotoSmart 7515 eFax service working again.

  Do you receive an error message when you try to use eFax?

  Try to go into this document. HP Photosmart 7510, 7515, ENVY 110, 114 printers - eFax Service restoration

  If you have any questions, or if this does not resolve the problem, let me know.

• HP Photosmart Wireless B109n-z: my scanner has stopped working

  My printer and copier work ok but the scanner has stopped working and gives me an error message-

  "The analysis cannot because another program or computer using the HP netwoked imaging device. Try again later.

  The device is not on a network, and there is no other users outside of myself using my laptop.

  Hello

  You can try this link?

  http://support.HP.com/us-en/drivers/selfservice/HP-Photosmart-wireless-all-in-one-printer-series-B109/3794623/model/3794624#Z7_3054ICK0K8UDA0AQC11TA930C7

  Thank you.

• When I install IE9, my printer Canon wireless stop working and more shows on my network

  When I install IE9, my printer Canon wireless stop working and more shows on my network, accordingly. I am reluctant to reinstall IE9... of ideas? I use Windows Vista

  Hello
  • You receive an error message when printing?
  • What is the model of the printer?
  • Do you still have Internet Explorer (IE) 9 installed on the computer or you have returned back to IE 8?

  If you have IE 8 then I suggest you to install IE9 and check the error message when you try to use the Canon printer.

  You can also follow these links:

   
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
   
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
   
  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

• HP Officejet Pro 8600 more N911g wireless, no work of scanning

  Wireless, no work of scanning

  Hello

  I suggest you uninstall / reinstall your printer using the Windows 7 most recent drivers that are available on the HP site for your printer model.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=4323648&LC=en&cc=us&DLC=en&lang=en&cc=us

  And also use the troubleshooting TAB steps there, too.

  Or ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/PSG/

  See you soon.

• Photosmart Wireless B109n-z: Impossible to connect the printer wireless to the new router

  I just changed my wireless router and can not get my printer to recognize the new router.

  When you try to reinstall with the disc that came with the printer it keeps "quit unexpectedly" at the end of the installation, but before I get to connect to the printer.

  The drive indicates that it is for use with Mac OS X v10.4; 10.5, but I can't find an option to update the web site HP despite it stating that my printer is still supported.

  I can still use the printer with a USB cable connected directly to my table, but this is no help for the other devices I have.

  Hi @Paulwrow,

  Welcome to the Forums of HP Support!
   
  I understand that you are unable to connect your HP Photosmart Wireless B109n-z to your new router wirelessly. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.
   
  The CD/DVD software will not work with newer versions of Mac OS X. HP doesn't have the drivers for this printer in Mac OS X 10.11 El Capitan. The last driver out of this printer is for Mac OS X 10.6. The only driver available that uses the driver update from Apple. This causes a problem when reconfigure the wireless, as this is the software for help. It would be easier if you have another computer running an operating system that is supported so that you can install the full feature software to configure the wireless.

  As an alternative method, you can try doing as a guideline to connect the wireless printer. We will use the ad-hoc connection. With the ad-hoc connection, you can launch the built-in web server (EWS) to access the wireless configuration wizard.
   
  Use the following steps as a guide:
  Restore the default settings of the network:

  1. Press the button next to the wireless Menu.
  2. Press the button next to wireless settings.
  3. Press the button next to network by default.

  Once the network is reset, the printer should disseminate the ad hoc connection. It should look like "hpsetup" or "HP Setup (and part of the printer name or MAC address). With an IP address like 169.82.12.44.
   
  Then, connect to the network printer, that is broadcasting.

  1. On the Mac in the upper right corner, click on the wireless icon and connect to the network "HP Setup" or "hpsetup".

  Print the wireless test report:

  1. Press the button next to Scan.
  2. Press the button next to the wireless Menu.
  3. Press the button next to wireless settings.
  4. Press the button next to run the wireless network Test.

  Browse the test report wireless IPV4 of the printer (IP address) 169.82.12.44.

  1. Launch your internet browser and enter the IP as shown. This should load the printer EWS.
  2. Click on the tab network across the top.
  3. On the left side, click on wireless or network.
  4. Run the Wireless Setup Wizard.

  This is the only way to reconfigure the wireless, unless you have another computer that has supported the software.

  For more information on the ad-hoc connection, see the User Guide.

  Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• fake disconnected ' HP Photosmart Wireless B109n-z. ' message

  Hi all

  Using the center of HP sollution, I see the message offline wireless HP Photosmart B109n-z.

  However, I can print, I can see the cardriges levels filling and I have no problem to reach the printer via IP address.

  However, this issue would prevent me from scanning documents.

  I already reinstalled the app once, but it was a disaster even more great, even scubber not having to uninstall the HP printer software.

  Any ideas?

  GRZ

  Hi there @robhoe

  Welcome to the community

  It sounds to me like driver installation has not filled completely and correctly on your system Windows 8.1, which could be the reason why you do not have the scanning features in the software.

  Please make sure you that the printer will make copies before make you any software troubleshooting, as if there is a problem copying (printer hardware problem), the installation will most likely never complete successfully.

  I know you tried a scrubber, and that's what I would try again to remove completely all the components of your PC printers and then reinstall them later. If you want to give a shot of this, I'll post all the steps below for you to try!

  1 run this cleaner tool to remove the printer files. Use only an uninstall of level 3.

  HP Officejet software and driver removal utility

  2. restart the computer entirely to complete uninstallation.

  3. download and run the installation of your PS B109: HP Photosmart Wireless all-in-One Printer series - B109 Full Feature Software and Driver

  I hope this works, good luck!

• Satellite Pro P300-1EC - cannot get wireless to work

  Hello!

  First of all. Excuse me for my English!

  TEC Spec.

  Toshiba Satellite Pro P300-1EC
  Intel WiFi Link 5100
  Windows XP Pro SP3

  I have a big problem. I can't get the wireless LAN working properly.
  And the customer has purchased this computer because his old computer stopped working with WLAN...

  I tried everything I can. And I am a person of educated tech, so I think I should have the knowledge of this, but I do not have.

  Short version.

  1. install the latest drivers. (Also tried more aged)
  2 restart the computer.
  3 WNIC takes about 10 min to find WLAN.
  4. While working perfect with 130Mbps on project N.
  5.i can user logout and change and all.
  6. when I restart I'm back at number 3.

  Long version:

  I installed XP pro since the XP downgrade Cd included and wireless drivers wasn't on that CD so I downloaded them. (And Yes. "This is the correct drivers.)
  After that I installed the driver and restart my computer, I could not find wireless networks. Kind of weird because I have 4 routers/points of WLAN on my company with the range 60-100% and about 3 other public routers without security. I tried to update the drivers to windows update, and WU has found an update for me. I installed driver and the wireless highlight function. I scream YES and restart the computer. Then it stopped working. N° !!!
  I was a little tired on the problem and began installing some other computers that I bought and when I looked the Toshiba computer that I saw that it was connected to my WLAN. Weird, but I thought it worked then I restart the computer again and then his does not work... again! Now, I have analyzedthe problem and it's like that.

  When I start the computer the my WNIC does not any WLAN.
  About 10 min (10m32s) after starting the wireless started working.
  I am able to disconnect and change the user and it still works, but as soon as I restart the computer it stops and I have to wait another 10 minutes. And so on.

  Anyone been trough something like this even if it is not not toshiba or my model?

  Hello

  What is the Satellite Pro P300 - 1EC BIOS is up-to-date?
  Please check everything first.

  You said you are using Draft N did you tried to establish the WiFi connection using other standard WLan as 802.11 A or G?

  I also recommend changing the WiFi channel and try other channels.

  In addition, you can change a WLan option that affects the WLan functionality. You can find these settings in the Device Manager-> card WLan-> properties-> Advanced tab

  Good bye

• HP Photosmart Wireless e-All-in-One Printer series - B110

  Hello

  I have the above printer and I m finding difficulty in ordering ink cartridges.

  The available cartridges are:

  HP Photosmart Wireless e-All-in-One Printer series - B110a

  HP Photosmart Wireless e-All-in-One Printer series - B110b

  HP Photosmart Wireless e-All-in-One Printer series - B110c

  HP Photosmart Wireless e-All-in-One Printer series - B110d

  HP Photosmart Wireless e-All-in-One Printer series - B110e

  I don't know the one to choose. Can someone help me choose the right cartridge please.

  Thank you

  Presho

  In the United Kingdom, the cartridges would be 364 series.  You can order black, cyan, magenta, yellow or pack combo with three cartridges.  The cartridge photo and four packs of color with the photo cartridge are not applicable for your printer.

  You can also use the XL 364 cartridges, they have more ink at a higher price, but at a lower cost per page.

• Satellite A135-S4527 cooling fan works more efficiently

  Hello

  I have an A135-S4527 and the cooling fan is having issues.
  It works at low speed constantly, as it usually does, but almost never, he runs in mode high speed.
  Clearly, it must be that the air temperature is high enough... about the temperature of the exhaust gases from the typical vehicle.

  I'm worried that it will burn upwards if I have not fixed, but I don't know what needs to be fixed.
  I use a "Chill Pad" USB power under him at all times to make it work more fresh than the factory settings, but this problem has arisen only recently.

  I've owned this computer from a little less than two years now.
  5 months in the property, the HARD drive failed and had to be replaced (it goes without saying, I save ALL my important files now).

  Does anyone have information on this topic or the normal functioning of the cooling fan?
  If so, it would be greatly appreciated.

  Nick

  Hello!

  As Akuma, it could be that it takes more dust in the cooling fans or fan doesn t work properly.
  So in your case, I'll try to clean first using a jet of compressed air. This could blow out the dust from the cooling fans. You can buy it at a computer retailer.

  If it doesn't work you should sent to an authorized service provider. Technicians can check your laptop and clean.
  Maybe the thermal compound must be renewed and technicians can do for you. It of a little more difficult to disassemble a computer laptop and you need to remove a large number of screws so he sent to an ASP.

  Good bye

• Print Spooler service is not running (could not install printer) hp photosmart wireless with

  Print Spooler service is not running (unable to install printer) hp photosmart with wirelessprint spooler service does not not (impossible to install printer) hp photosmart wireless with

  Hello

  · What is the model number of the computer?

  Try not the link below and check if it helps: you encounter printing problems, display the printer icons and adding printers, the print spooler service does not work correctly and you receive error messages related to printing on a Windows XP computer: http://support.microsoft.com/kb/919750

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close": http://support.microsoft.com/kb/810894

• Wireless mouse works intermittently

  My mouse, intermittently, works, or it, glitches and does not at all.  I have a NEW mouse to see if this corrects the problem.  No, he didn't.

  My NEW mouse: Blackweb Bluetooth wireless mouse, model number: BWB15HOo213, S/N: PRDMU36.

  My OLD mouse: Logitech M310, P / N: 810-004004, S/N: 1501LZ6ELA8

  My old mouse glitched, as described, and so I decided to get the NEW mouse.  SAME QUESTION for the new.

  What is the problem?

  Wireless mice are more trouble that it be put in place with.  First recommendation is of use a cable.

  Wireless mice are common problems, because they depend on a radio signal between it and a receiving device.  If a device has a low battery, you will have a problem.  The radio signal between devices is very low and depends on being close enough and especially no radio no signal interference.  The signal interference can come from many sources, but the computer itself can be the worst offender.  Try to move the receiver close enough (a few inches) with the mouse and see if that helps.

  In your case, it looks like interference.

• AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work

  I just upgraded a fairly new computer of mine from Vista to Windows 7 Professional.  The upgarde went well however the AERO Peek stopped working after a few adjustments with HP to get my Photosmart printer to work.  I tried to make the show thumbnails of running programs to display in the taskbar with no luck.  Any suggestions?

  Hi Lisa52465,

  (Already responded to dadams26 in a separate thread and it fixed the problem beautifully).

  Have you tried to run the Aero Troubleshooter? If this is not the case, try this:

  1. open the control panel

  2. go in the system and security category

  3. go to the Center of the Action

  4. click on the link to solve common computer problems

  5. click on appearance and personalization

  6. Select Aero

  He must either correct the errors problem or the State to determine the cause.

  If the Aero Troubleshooter is not the thing, maybe it's just that the Aero feature has been disabled by the update. Try this:

  1. right click on the desktop

  2 select Customize

  3. Select an Aero theme

  4 see if previews back

  Just for the record, could you let us know if any of the suggested fixes works (and which). If you still have problems after trying the above, could you please come back with more details (if possible).

  > This answer help?  If so, would you please click the green button to Vote as helpful to help future visitors encounter the same problem.

  All the best,

  Sharon

  Sharon Roffey
  Queensland, Australia

• INK CARTRIDGE 364 (BLACK) DOES NOT MATCH THE HP PHOTOSMART WIRELESS E-ALL-IN-ONE PRINTER

  AT THE END OF THE YEAR, I BOUGHT THE HP PRINTER PHOTOSMART WIRELESS E-ALL-IN-ONE (B110A).  I REPLACED THE COLOR (364) CARTRIDGES, BUT THE CARTRIDGE BLACK (364), I BOUGHT IS NOT SAME SIZE ONE PROVIDED WITH THE PRINTER, IT IS MORE SMALL AND DOES NOT FIT IN THE SLOT.  DOES ANYONE ELSE HAVE THIS PROBLEM?  NOW PRINTER CANNOT USE AS BLACK IS EMPTY AND CANNOT REPLACE IT AS THE 364 PROVIDED WITH THE PRINTER IS DIFFERENT FROM THE PURCHASED SEPARATELY.  VERY FRUSTRATING.

  Thank you

  KERRY

  Thank you Carolyn.  I'll get to watch the 564 cartridge.  Thank you very much for your hope to answer that I can get this resolved otherwise it's back to the PC with the printer world for a refund!

  Thank you

  Kerry