PHP direct direct file with media
Hello to all and congratulations to you for this ADOBE software wonderful media
I wonder if it is possible to operate the live preview for the php files.
knowing that I'm on ubuntu and I install a "LAMP" Server (apache, php5) which is accessible at http: / / localhost...
Thank you
Yes - you can use the live preview with your localhost PHP server. The only downside is that you lose direct HTML updated - but you get alive CSS update & highlighting. And when you change a PHP and you click on save, edge Code will automatically reload the page for you (aka "reload live," which is not as beautiful as Live Preview full updated but still nice enough).
To indicate the advantage Code to use your PHP server, follow these instructions: https://github.com/adobe/brackets/wiki/How-to-Use-Brackets#lp-custom-server. This page refers to 'Hooks', which is the open-source project code of edge is taken; the instructions are the same for both.
Hope that helps!
-Peter
Tags: Edge Code
Similar Questions
-
I was looking for windows, came across a file I does not recognize. I opened it with media player. Well he opened all of my icons/files desk and my Start menu with an exstention .lnk files. I am desperate to solve this problem before my husband gets home! I tried to do a system restore on the 15th, but he says the restore fails because he couldn't find not to a lack of time. file
Hello
Thanks for posting the request in the Microsoft community forums!
I understand that the desktop icon change extension .lnk. Do not worry about the advice given will help you solve the problem.Method 1:
Try to change the association of files from the control panel.
Go to the following location to change the associated file.
Start \Control Panel\All Control Panel Items\Default Programs\Set Associations
You can access the link below and follow the instructions on how to change which programs Windows uses by default: http://windows.microsoft.com/en-us/windows7/Change-which-programs-Windows-uses-by-default
Method 2:
If the steps above fail then you can try the suggestions section of the knowledge base and check.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
http://support.Microsoft.com/kb/322756If you have any other questions about windows, write to us, at any time.
-
How to get rid of the music files with media player 11 duplicate
I added a new location and you have now a ton of duplicates. How can I get rid of the ones I don't want?
Hi Mungindi,
You can rebuild the Media Player library which should deal with the issue.
Method 1: Erase the database of Media Player and look for the question.
a. click Start, click run, type %userprofile%\Local Settings\Application Data\Microsoft\Media Playerand then click OK.
b. Select all files in the folder, and then click delete on the file menu.
Note You don't have to remove the folders that are in this folder.c. restart Windows Media Player.
Note Windows Media Player automatically rebuilds the database.Method 2: If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
a. exit Windows Media Player.
b. click Start, click run, type %userprofile%\Local Settings\Application Data\Microsoftand then click OK. .
c. Select the Media Player folder, and then click delete on the file menu.
d. restart Windows Media Player.
Note Windows Media Player automatically rebuilds the database. -
How to share files with media player between computers?
as above, how do you get media player to allow the access/share files on a wireless network home. Also how can you say what version of media player you have? any help appreciated cheers
Hello
Personally, I don't use file sharing in wireless connection. But take a look at this site:
http://www.Microsoft.com/windows/windowsmedia/player/FAQ/sharing.mspx
Note in firewall settings, you must allow sharing between computers.
-
10 x slower with media encode that Premiere pro direct export of rendering
We use CS5 (use Adobe since 2004). I opened a sequence (published in first without length fantasy effect - it just open title & title closing - 4 minutes). It's HDV so nothing special or out of the ordinary.
If I turn the sequence by clicking on FILE = > EXPORT = > MEDIA and export in this way it will take about 1 minute to make the file.
If I close first and open Media Encoder and import the same sequence and return with exactly the same settings, it will take 10 or 11 minutes to render.
I tried the most obvious areas such as closing all other programs and only opening media encoder, as well as ensure that the allocation of RAM is the same for media encode, but nothing seems to restore Media Encoder at the same speed.
No matter what video format is on the entry or export... media encoding is always much slower.
Why Media Encoder takes much longer to make?
You have a CUDA card that can run hardware MPE? You're upgrading scaling and deinterlacing of video on export? You have a maximum quality made verified?
If you answered Yes to all 3 questions, then this is the answer to your question. SOUL CS5 uses the MPE software for certain operations (such as scaling and deinterlacing) even if the MPE material is available. Direct export of the Pr use an MPE material for these same operations.
-Jeff
-
I opened 2 emails that were in the folder spam from my email and that each contained an attachment zip 2 k and 3 KB. As I could not open directly in my email, I opened the zip files with the "open in" another app option. When you open the zip files at this other app asked me if I wanted to extract zip files in a new folder, I have accepted, in both files .js (javascript) files there. I opened these .js inside this same application files and content files white text on black background and that seems to be a script file. My question is: my iPad Air has been compromised by a scam of viruses, such as the Trojan horse thieves and banking password especially as Dridex or Dyreza, the Trojans and ransomware as Locky, cryptolocker, or Teslacrypt. If that were the case, then what is the solution to get rid of these... Thank you.
Simply delete them. It is not possible to install anything on iOS using this method. For good measure, you can remove and reinstall the application allowing you to open it with, but I don't really have that is actually needed.
-
Open with Media player after downloading the files
When I download music to a Web site it is sent directly to the media player and usually I can open the location of the file, but now is not an option. Is there a way to make this option available again?
This is only an option if the webserver gives it.
-
Unable to read the .avi files with Windows Media Player 11 on XP
Original title: Media player upgrade was worse than basic
I recently updated my Player multimedia media Player 11 and now it won't play movies from AVI file that I used to be able to play easily on the outdated version. Why is this?Hello
Do you have an error message when you try to play with Media Player AVI files?
When you try to play a file that uses a codec that is not installed on your computer, Windows Media Player attempts to download the codec from a Microsoft server. If the
Codec is available, the Windows Media Player installed on your computer, and then bed file. However, if the codec is not available on the server (for example, because)
the codec not created by Microsoft), Windows Media Player displays a message that your computer is missing a codec.In some cases, the file you want to play uses a codec that is not available or compatible with Windows Media Player. When this happens, you may be unable to use Windows Media Player to play this particular .avi file.
You can consult this article for a solution:
You receive an error message when you try to play an .avi file in Windows Media Player
http://support.Microsoft.com/kb/279242Kind regards
Afzal Taher-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Xbox360 telling me to put a key port so that I can share files with windows media player 11
I try to share my files windows media player with my Xbox 360 and on the xbox it tell me to put a number of port key in. I have the xbox number, but do not know where to ask the code Media Player. I turned on the sharing of multimedia files.
Hello
I suggest you refer to the section that talks about network and firewall requirements in this link:
Sharing media on a network using Windows Media Player
Note: This link implies also on Windows XP.
-
just today, when I try to play AVI files from my digital camera... no sound plays on my pc with media player v11... I suspect it's a codec problem, but how do I know for sure?
Hello Jorstar1,
Thank you for your message. Windows Media Player 11 supports .avi, but compression can dictate whether he will play or not. This is very probably a Codec issue, you can perform a websearch for a Codec that will play any avi compression.Please let us know if it did or did not help to resolve this problem.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
How can I play flac Audio files with extension on windows media player
How can I play flac Audio files with extension on windows media player
Hello jesskenneth,
Thank you for visiting the Microsoft answers Site.
The extension Flac is not a type of supported Windows Media Player file. However, you can user your favorite search engine to search for a solution that can convert the file in a supported file type Windows Media Player.
For more information on the types of files supported by Windows Media Player, you can also view the following link:
Information on the types of media files that supports Windows Media Player
Thank you
Mary
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Windows media player will not play a video file with a .zip extension
Windows media player will not play a video file with a .zip wish. What can I do to let him play?
I checked and I have the latest version of windows media player.
A .zip file is not a video file, it is a compressed file. Extract the video file in the zipped file.
How to extract files Zip on Vista
http://www.ehow.com/how_4913615_extract-zip-files-Vista.html -
When burning a dvd in media center of vista, the video playback is choppy. Time to watch live TV in media center or the playback of a video file with any player. How can I fix this. my display driver allows hardware acceleration settings.
Hello
Try to upgrade your graphics card to the latest drivers and check.
You can also check this link:
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
If not try running SFC scan.
http://support.Microsoft.com/kb/929833
It will be useful.
-
Windows media player does not automatically open a video file on a Web site but I save it and open the file with Windows media player to play the video or audio recording. I used to be able to play any video or audio file in any site!
Hello
Try resetting the default associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.htmlIf necessary:
How Unassociate a Type of Extension file in Vista - and a utility to help
http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html
Restore the Type Associations by default Vista file extensions
http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
How to view and change an Extension of filename on Vista
http://www.Vistax64.com/tutorials/103171-file-name-extension.html====================================
Also follow these steps:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html------------------------------------------------------------
Then, if necessary:
Have you recently installed another player?
Reset your associations for WMP and IE.
How to set default Associations for a program under Vista
http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html
How to associate a file Type of Extension to a program under Vista
http://www.Vistax64.com/tutorials/69758-default-programs.html---------------------------------------------
Do this to reregister the Jscript.dll and Vbscript.dll files.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
type or copy and paste-> regsvr32 jscript.dll
Press entertype or copy and paste-> regsvr32 vbscript.dll
Press enterRestart and if all goes well, it will run now.
--------------------------------------------------------------
Have you recently added stores or ANY application from Stardock?
Using 64-bit Vista?
Can you think of recent things you did in WMP which could be the cause? You added another
reader recently or an add-on for WMP?When I try to use Windows Media Player 11, the program does not start, or some UI elements
are empty - a Mr Fixit
http://support.Microsoft.com/kb/925704/en-usMaybe something here
http://msmvps.com/blogs/chrisl/articles/17315.aspx
and here
http://msmvps.com/blogs/chrisl/Archive/2004/10/30/17399.aspxCheck here the news of WMP11
http://zachd.com/PSS/PSS.htmlI hope this helps.
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
When I try to open a PDF file with adobe Acrobat reader, windows media center automatically opens. How to prevent this? I just want to open the PDF file with Acrobat reader.
The solution I think. If you right-click on one of the files and select open the file locations it now combined the file with adobe reader.
Yes - you simply need to change the associated file (and path) back to Adobe Reader. (If that's your choice PDF reader.)
If you did this:
Press the Windows Logo and R key at the same time to bring up the dialog box RUN.
Once you have the dialog box up, type in the following command and press OK...cmd /k ftype AcroExch.Document
That he return with? Should be something like:
AcroExch.Document = "C:\Program files (x 86) \Adobe\Reader 10.0\Reader\AcroRd32.exe" '%1'
Maybe you are looking for
-
Satellite U500 - drivers not "signed": cannot install
Toshiba is really the best laptop I've seen! I had to change my HD because of a hardware failure (dead disk); before that, I did a "recovery disc" Toshiba System. I thought I would just to boot from this DVD to reinstall them all. BIG MISTAKE! So I s
-
How can I monitor util programmatically
Hello. How can I monitor util programmatically? in the Windows taskbar, in the Performance section Manager, I can read the util and the use of the CPU, but I want to read directly in Labview, it is posible? is it exists any vi that does this? Thank y
-
I'm trying to upgrade my Dell E510 Windows XP to Windows 7 Professional that I bought.
I did all the back up and these and I run the Setup. I choose the Customize option because I know that I have to reformat the hard drive. He started very well. It decompresses the files and completes and goes for its first reboot. Then after that
-
Where can I find a program compatibility to run on my windows 7 Home premium
Original title: program compatibility Where can I find a program compatibility to run on my windows 7 Home premium to see how many of my programs is compatible with window 10
-
Stop the screen from turning off automatically
Hello Anyone know how I can force the screen turn off if the touch screen (BB9500) is not touched for a while?