PHP form script is missing on the web server. What now?
Go for now, I have the link for the form site phone: http://hopsewee.com/phone/southern-Planation-weddings.html
on the version of office to complete and submit: Contact us on your wedding Hopsewee
However the form works fine on my iPhone, but Android users get the error:
"PHP script form is missing from web server or PHP is not properly configured on your web hosting provider. Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP. »
So far all forms worked and the customer receives the bid. It's GoDaddy hosting and GoDaddy email. The result of my scripts/form_check.php has two green controls and no third article. Since forms are working the case, I'm at a total loss about where to go next in terms of troubleshooting.
It looks like a small problem with the hosting or the network connection which translates the .php file not to load. Everyone continues to encounter this error? It met on multiple devices/computers? If so, what did the devices/computers have in common (regarding the OS, browser, network connection or just the time during which the attempt to load the page)?
Tags: Adobe Muse
Similar Questions
-
PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.
Hi Graham,
If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.
In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets
I hope this helps!
Emily
-
Not possible to activate the scripts on the Web server
Hello
I would like to create a page .html for Web with a bit of scripting ESP included - Services because now I understand just this:
<% for (i=0; i<3; i++) {
...some text...
} %>According to this document NOR, I first need to enable scripting:
To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.
I activated the Web server and it works OK. But there is nothing called "Scripting" in the configuration page - and the script is executed (the code is just printed in the form of simple text).
Anyone know how to activate the ESP script?
Version: LV 2012.
Best regards, Jan
Hi Jan,
In fact, you use the ESP file instead of a static HTML file. For example, if we had the static html file:
Hello world
This file can be located at something like /MyWebService/HelloWorld.html.
If I then do something like have a page to say "Hello, Jan" or "Hello, Mark" I could use ESP. In this case, your code might look like:
<>
var xname = form ['name'];
%>
Hello, @@xname
The URL of such a web method is perhaps something like jan/MyWebService/Hellovar/Jan where Jan string literal passed to the terminal of a web method that can resemble
In this example, the string "Jan" is passed to the terminal of the value of the VI. What implementation of the Web method in the spec to build his signature might look like in /Hellovar /: value.
So, back to your original question. You embed not ESP breast and the HTML document. Instead, you embed HTML inside a document of ESP and the rendering of the document in HTML format when accessing the URL of the Web method. While the paper you mentioned earlier has an example project in that you can use as a reference
-
Activation of scripts on the Web server
I found this, but cannot locate Scripting on the Web Server: Configuration page
Activation of scripts on the Web server
To use the script with a Web service, you must enable the feature on the Web of LabVIEW server. In LabVIEW, select the script on the Web Server: Configuration page in the dialog box Options to enable the use of scripts on the Web server.
http://zone.NI.com/DevZone/CDA/tut/p/ID/7738
It seems that scripting is enabled automatically.
-
Picture POST on the web server problem
Hi gurus
I am trying to display a picture jpg on a web server. I tested my PHP script on the server and I am able to upload an image using a form. Now I am making an application Blackberry POST the image on the server by using the same script however when I test the code in Java, PHP tells me that nothing has been published, I don't know what I'm doing wrong but I am doing something like this:
String mBoundary = "SUPSUPSUPSUP"; /* Preparar objeto a enviar */ InputStream mImagen = this.getClass().getResourceAsStream("sample.jpg"); byte[] mBytesPostear = IOUtilities.streamToBytes(mImagen); HttpConnection mConexion = (HttpConnection) Connector.open("http://www.raspberry.com/script.php"); /* Preparar headers del POST. Es multiformulario con POST de un archivo */ mConexion.setRequestMethod(HttpConnection.POST); mConexion.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_TYPE, HttpProtocolConstants.CONTENT_TYPE_MULTIPART_FORM_DATA + ";boundary=" + mBoundary); mConexion.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_LENGTH, String.valueOf(mBytesPostear.length)); mConexion.setRequestProperty( "x-rim-transcode-content", "none" ); /* Preparar contenido de salida */ ByteArrayOutputStream mOutput = new ByteArrayOutputStream(); OutputStream mOS = mConexion.openOutputStream(); /* Escribir contenido */ String nuevaLinea = "\r\n"; String contDisp="Content-Disposition:form-data; name=\"foto\";filename=\"sample.jpg\""; String contEnc = "Content-Transfer-Encoding: binary"; String type="Content-Type:image/jpeg"; mOutput.write(nuevaLinea.getBytes()); mOutput.write("--".getBytes()); mOutput.write(mBoundary.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(contDisp.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(type.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(contEnc.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(mBytesPostear); mOutput.write(nuevaLinea.getBytes()); mOutput.write("--".getBytes()); mOutput.write(mBoundary.getBytes()); mOutput.write("--".getBytes()); mOutput.write(nuevaLinea.getBytes()); /**********************/ /* Escribir el contenido */ mOS.write(mOutput.toByteArray()); mOutput.flush(); mOutput.close(); mOS.flush(); mOS.close(); /* Recibir respuesta del servidor */ InputStream mIS = mConexion.openInputStream(); int mLongitud = (int) mConexion.getLength(); if (mLongitud > 0) { int mActual = 0; int mBytesLeidos = 0; byte[] mBytes = new byte[mLongitud]; while ((mBytesLeidos != mLongitud) && (mActual != -1)){ mActual = mIS.read(mBytes, mBytesLeidos, mLongitud - mBytesLeidos); mBytesLeidos += mActual; } String mRespuesta = new String(mBytes); System.out.println("Respuesta: " + mRespuesta); }
I just tried to clone the header sent by Chrome when I use the form, I think that they have the same information.
My PHP script first checks to see if something has been posted, if nothing has been validated, it returns a message so I'm able to "consume" the script on the web server and I see that the BlackBerry is the download of the data, but the answer is that nothing has been reported.
I think I sent you the info about the server in the wrong format.
Any help would be greatly appreciated.
Thank you!
Thank you all, it works fine now, I send you the length of the full header now, it works now, I'm sharking my code. Just create and instance of this object, passing the URL of web script and the bytes of the image to the constructor, then call the getRespuesta() method
Here we have the code:
public class PostImagen { private String mURL; private byte[] mDatos; public PostImagen(String URLServicio, byte[] Datos){ mDatos = Datos; mURL = URLServicio; } public void getRespuesta() throws Exception { try { String mBoundary = "SUPSUP"; /* Strings a usar para el contenido */ String nuevaLinea = "\r\n"; String contDisp="Content-Disposition: multipart/form-data; name=\"foto\";filename=\"sample.jpg\""; String contEnc = "Content-Transfer-Encoding: binary"; String type="Content-Type:image/jpeg"; /* Preparar objeto a enviar */ byte[] mBytesPostear; if (mDatos == null){ InputStream mImagen = this.getClass().getResourceAsStream("sample.jpg"); mBytesPostear = IOUtilities.streamToBytes(mImagen); } else { mBytesPostear = mDatos; } System.err.println("Longitud de imagen: " + mBytesPostear.length); /* Preparar contenido de salida */ ByteArrayOutputStream mOutput = new ByteArrayOutputStream(); mOutput.write(nuevaLinea.getBytes()); mOutput.write("--".getBytes()); mOutput.write(mBoundary.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(contDisp.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(type.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(contEnc.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(nuevaLinea.getBytes()); mOutput.write(mBytesPostear); mOutput.write(nuevaLinea.getBytes()); mOutput.write("--".getBytes()); mOutput.write(mBoundary.getBytes()); mOutput.write("--".getBytes()); mOutput.write(nuevaLinea.getBytes()); /* Preparar conexión y headers */ HttpConnection mConexion = (HttpConnection) Connector.open(mURL); mConexion.setRequestMethod(HttpConnection.POST); mConexion.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_TYPE, HttpProtocolConstants.CONTENT_TYPE_MULTIPART_FORM_DATA + ";boundary=" + mBoundary); mConexion.setRequestProperty(HttpProtocolConstants.HEADER_CONTENT_LENGTH, String.valueOf(mOutput.size())); mConexion.setRequestProperty( "x-rim-transcode-content", "none" ); /**********************/ System.err.println("Escribiendo stream"); OutputStream mOS = mConexion.openOutputStream(); /* Escribir el contenido */ mOS.write(mOutput.toByteArray()); mOutput.flush(); mOutput.close(); mOS.flush(); mOS.close(); System.err.println("Se terminó de escribir payload, recibiendo respuesta"); /* Recibir respuesta del servidor */ if (mConexion.getResponseCode() != HttpConnection.HTTP_OK){ throw new Exception("El servidor NO regresó OK (200) al leer la respuesta. Saliendo..."); } InputStream mIS = mConexion.openInputStream(); int mLongitud = (int) mConexion.getLength(); if (mLongitud > 0) { int mActual = 0; int mBytesLeidos = 0; byte[] mBytes = new byte[mLongitud]; while ((mBytesLeidos != mLongitud) && (mActual != -1)){ mActual = mIS.read(mBytes, mBytesLeidos, mLongitud - mBytesLeidos); mBytesLeidos += mActual; } String mRespuesta = new String(mBytes); System.out.println("Respuesta: " + mRespuesta); } else { throw new Exception("No se recibió respuesta del servidor"); } } catch (IOException e) { throw new Exception("Error de lectura o escritura: " + e.getMessage()); } } }
-
PHP is not properly configured on your web server.
Hello, I download a site Web of muse and me always error at the end - "1 WARNING.
PHP is not properly configured on your web server. Forms of the muse does not work correctly unless PHP is enabled on the web server. Contact your Web host or Web site administrator on how to enable PHP support. "
already on the site online form that do not send the email from the same mistake.
How can I solve my problem?
Thank youMargarida Amara
Hello Margarida,
Your Web host must support PHP and the PHP mail service must be properly configured to send e-mail messages. If you use the feature to download FTP in the Muse, Muse will attempt to warn you if it detects that your Web host does not meet these requirements.
I suggest you contact your hosting provider in order to get this resolved.
Thank you
Ankush;
-
PHP mail can be disabled or misconfigured web server.
Hi, I build a Web site for a client. They organize the Web site using a 3rd party hosting company.
Download of the Web site on their FTP server, I get the following message:
1 WARNING
PHP mail can be disabled or misconfigured web server.
These forms can not send email. Contact your Web host or administrator of the Web site on the correct configuration of PHP mail.
The client contacted their host and that's what they were saying;
We checked with the contact form: http://wsportscoaching.com/contact-us.html and found that there is a problem with it, because disable PHP mail on the server for security reasons, where you suggest to you please contact your Web site programmer and change the form code email with SMTP authentication code, it will solve the problem with the contact form.
--
SMTP Username and password: use your domain e-mail address and the password.
SMTP PORT: 25
SMTP HOST: wsportscoaching.com
I didn't belive this is correct, please could someone help me with this problem?
A big thank you Darren.
Hello
If you check Muse PHP Diagnostics
You should see the problem with the configuration of PHP on the server.
Please take a look at this document and see if it is useful.,.
Troubleshooting Muse form used on the servers of third party Widgets
Let me know if you have any question.
-
I can\ to connect to the web server integrated on my D7460?
Hello
I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.
Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.
Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.
I checked what the said road IP address he gave to the printer.
Any suggestions would be welcome.
OK, I seem to have solved the problem.
I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.
Who having spent 'WPA only' I can now ping, print and connect to the web server.
-
External HTTP >; internal to the web server
Hello
I have a router ADSL with a public IP assigned, preforming NAT. This leads to a 506th PIX which leads to a Web server. The entire interior of the ADSL is on private IP addresses.
I want to allow external users access to the Web server on port 80.
I inwardly and outwardly put up ICMP connectivity (for testing only) and it works correctly.
I created a virtual server on the ADSL router that forwards port 80 traffic to the external interface of the web server. It has worked successfully for half an hour and then something in the config changed PIX and it no longer works. Here is my config PIX
SH conf
: Saved
: Written by xxxxx at 08:41:10.001 NZST Thursday, October 13, 2005
6.3 (4) version PIX
interface ethernet0 car
Auto interface ethernet1
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
enable the encrypted password xxxxxxxx
xxxxxxxxx encrypted passwd
hostname PIX
domain ciscopix.com
clock timezone GMT
fixup protocol dns-length maximum 512
fixup protocol ftp 21
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol http 80
icmp protocol error correction
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol sip 5060
fixup protocol sip udp 5060
fixup protocol 2000 skinny
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol tftp 69
no names
name 192.168.5.3 PixExt
name PixInt 192.168.6.1
name 192.168.5.1 ADSLInt
name 192.168.6.2 WebExt
acl1 list access permit icmp any any echo response
access-list acl1 allow icmp all once exceed
access-list icmp permitted acl1 everything all inaccessible
acl1 list access permit tcp any host 192.168.6.2 eq www
pager lines 22
opening of session
timestamp of the record
Record being buffered memory errors
logging trap notifications
ICMP allow all outside
ICMP allow any inside
Outside 1500 MTU
Within 1500 MTU
external IP 192.168.5.3 255.255.255.0
IP address inside 192.168.6.1 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
location of PDM 192.168.6.2 255.255.255.255 inside
PDM logging 100 information
history of PDM activate
ARP timeout 14400
NAT (inside) 0 192.168.6.0 255.255.255.0 0 0
Access-group acl1 in external interface
Route outside 0.0.0.0 0.0.0.0 192.168.5.1 1
Timeout xlate 0:05:00
Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225
H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
AAA-server GANYMEDE + 3 max-failed-attempts
AAA-server GANYMEDE + deadtime 10
RADIUS Protocol RADIUS AAA server
AAA-server RADIUS 3 max-failed-attempts
AAA-RADIUS deadtime 10 Server
AAA-server local LOCAL Protocol
Enable http server
http 192.168.1.0 255.255.255.0 inside
http 192.168.6.2 255.255.255.255 inside
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd lease 3600
dhcpd ping_timeout 750
xxxxx xxxxxxx privilege 15 encrypted password username
Terminal width 80
Cryptochecksum:xxxx
DMZInside (config) # route sh
outside 0.0.0.0 0.0.0.0 192.168.5.1 1 ANOTHER static
outside 192.168.5.0 255.255.255.0 192.168.5.3 1 static CONNECTION
inside 192.168.6.0 255.255.255.0 192.168.6.1 1 static CONNECTION
DMZInside (config) #.
No idea where I have gone wrong?
Thank you.
you are missing this statement
public static 192.168.6.2 (Interior, exterior) 192.168.6.2
Thank you
Nadeem
-
Error video files uploaded to the web server
Hi all. I get an error when I transfer my project on the web server. Everything works fine on the spot. I have a video that should play upon creationcomplete. When I run at the local level, no matter where I put the. FLV file and addjust the path accordingly, it works fine. For now, I put the FLV file to the root. All image paths work fine. But when I put the server, I get an error. I use mx:VideoDisplay. Following is the display code and the error message when I click on the play button. Do I have to do the code all ActionScript NetConnect and NetStream? Is there a MIME type that I need them to put it on the server? Thank you.
I found this in the Docs, but it's not exactly my mistake. I ask the hosting company to consider.
http://KB.Adobe.com/selfservice/viewContent.do?externalId=tn_19439 & sliceId = 2
The hosting server is Windows 2003 IIS 6 and see the URL is:
http://www.mediatransferplus.com/MTP.html
My Code:
< mx:VideoDisplay id = "video1" source = "ComfortablyNumbFirstSolo.flv"
autoPlay = "true" horizontalCenter = red "8" = "51" visible = "false".
width = "328" height = "218" / >
< mx:Button x = "10" y = "518" label = "Play" click = "video1.play ()" / >
The error Code:
Error: 1000: cannot connect to the server or to find FLV on the server.
to mx.controls.videoClasses::VideoPlayer/play() [E:\dev\flex_3_beta3\sdk\frameworks\projects\ framework\src\mx\controls\videoClasses\VideoPlayer.as:1325]
at mx.controls::VideoDisplay/play() [E:\dev\flex_3_beta3\sdk\frameworks\projects\framework\sr c\mx\controls\VideoDisplay.as:1462]
to DPW / ___MTP_Button1_click ([C:\Inetpub\wwwroot\MediaTransferPlus\src\MTP.mxml:141])
It was a missing MIME type.
video/x-flv for the .flv extension must be defined on the server. Who did.
See you soon!
-
I liquidated my bar. As the search bar when you type in the web address, and now I can get it back. I handed to the clicked place where I did to trun off (unchecked it), and I don't see anything again?
Hold down the key (key in OSX) and press the following letters in this exact order: V T M
The bar of menus must now appear permanently, unless you turn it off again (view > toolbars). Turn on/off the menu bar is a new feature in version 3.6.See the other bars under view > toolbars. By clicking on one of them will place a check mark (display) or remove the check mark (not shown).
Then, in the Menu bar, go to view-> toolbars-> customize, then press the Restore Default Set .
-
Here's a question I'll get lucky with. I have a VI, set to be reentrant, broadcast via the web server. The main instance of the VI is never worked with: it's a clone whenever someone accesses the correct URL, and the user interacts with the newly created clone (never the main forum). A clone is able to configure and calling instrument VI when good IDs are entered, which translates to browser popups that are controllable on the end of the user (even if only one user ever does both. To clarify, many clones can be opened simultaneously for connection purposes, but that a user never interacts with the instruments that are not themselves reentrant).
If the user clicks on my Logout button in their browser, it is trivial to close these instruments other, independent and properly clean. But if the user simply click on the red X in their browser, it is non-stop and the instruments that the clone called stay open on the server, when they close.
My experience so far:
No close panel? event seems to be triggered in the clone. The clone simply cease to be.
The remote_panel_connections property doesn't seem to work properly in this case (I have not had luck so far), since it is possible that more than a clone to be active and that the main parent who is spawning clones stays running, but is not interacted with in some way.
What I need:
One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.
--------------
I would like to avoid forcing the instruments that the clone call to constantly query to see if the VI clone is present on the network. If there is no other solution, but this, I would appreciate a suggestion as to the intensive way less code and resources to implement this type of interrogation, as the instruments are really designed to be totally independent after they are called, rather than under vi.
Thanks for all comments, let me know if you need more information.
MTdev wrote:
One way for the clone of VI recognize that the user has closed his browser and communicate that it closes all the assets of VI before ending.
When a VI stops running, any reference as a queue is also cancelled. You can make use of this fact. If your original clone VI could launch a second reentrant VI, which remains active, you could channel all communications to the instruments via VI second using a queue created in the first. When the first VI disappears, it will trigger an error waiting waiting VI in the second (no vote office is involved). The second VI can take all the necessary measures.
-
start the Web server in different folders
I developed a compiled VI (Smarts - Net .exe) that has been designed to operate in a specific folder (\Smarts-Net) and activated the Server Web page of Smarts - Net .html in the same folder. So far so good.
The application receives data in real time produced another of our programs and generates graphs to show "what happens".
My clients would like run multiple instances of my program for their customers, but want to isolate their customer 'A' customer 'B' so that they cannot display the data on the other. I can start my application using different IP ports so that I can have multiple views, but I want to further isolate the data of the customer in different folders.
I did a 'manager' program that will create a subfolder of the folder in my main application (\Smarts-Net) so that it would appear as "\Smarts-Net\JobA" and copy all the files in the main folder in the new subfolder. I then change the of Smarts - Net .ini file with the new pathname of the file and the new port like this number:
[Smarts-Net]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
Server.TCP.servic = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.DirectoryIndex = "index.htm"
WebServer.LogEnabled = True
WebServer.LogPath=C:\Smarts-Net\Logs\Smarts-Net.log
WebServer.MimeTypes = (a LOT of Mime types in here... I left aside for this post)
WebServer.Port = 9501
WebServer.Enabled = True
WebServer.RootPath=C:\Smarts-Net\JobA
WebServer.TcpAccess = "" + c * ' "
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = FalseAfter you change the .ini file, I start the application (Smarts - Net .exe) to the new folder.
This is where I need help. If I try to display the VI from another computer using an address like http://snape:9600/JobA/Smarts-Net.html, I get an "HTTP 404 - File not found" error. But, if I try to http://snape:9600 / Smarts - Net .html, I get the VI Panel!
Thus, it seems that I can change the Port in the .ini file, but not the RootPath. Does anyone know how to get the html to load from a different folder from the one specified when I created the application code?
Hello Steve,.
From your description it looks that the web server is already doing what you say you need for.
There is a difference between the URL path, the path that is entered in the browser and the path of file system, the location of the file on the disk.
The WebServer.RootPath token specifies the directory of the file system that corresponds to the root directory, "/", in the URL. You have specified C:\Smarts-Net\JobA as root your path so all files in this directory will be the URL of the http://mycomputer:myport / myFile. If you want the URL of http://mycomputer:myport/Logan/myFile then you need to have your root C:\Smarts-Net\ directory.
Does make sense?
Nathan
-
Additional installers do I need to use the web server?
I am building an application in LabVIEW 8.6 and want it includes the Web of LabVIEW server and eventually Web Services. Should additional installers I include? In addition to the runtime, the following options are: 'LV Web Services', "NI LabVIEW Run-Time Engine Web Server", "NI LabVIEW Web Server." I can find no documentation explaining the differences between these - especially the last two.
Hello Nathan,.
From 8.6 web server is a separate component. Just as LabVIEW desktop is a separate installation program since the runtime if there is a web server for each component. In addition, Web Services is a component that is generated on the web server.
So, if you need web server in the Office two, LabVIEW and RTE and you eventually will need to deploy web services, as well, then you'll need to install these components.
Here's our FAQ to get Web services work - you might be useful.
-
What is the web server integrated for Windows XP Professional?
Hello
I would like to know what the web server integrated for Windows XP Professional.
I don't know of a free web server like Apache or IIS.
I want to host my site on the net using the web server integrated in XP (not IIS).
Thanks in advance.
It is not just any server web, other than IIS, integrated with Windows XP Professional.
You think perhaps of Personal Web Server (PWS) which was part of the old operating systems like Windows NT. Which no longer exists in Windows XP Professional - it has been replaced by IIS.
-B-
http://www.officeforlawyers.com | http://www.OneNote-tips.com
Author: Guide to counsel for Microsoft Outlook
Maybe you are looking for
-
How do I copy/scanning with my printer laserjet P1102w
pls tell me where to go to get this info
-
The printer works properly from the computer with Wi - Fi. The copy of front button works correctly to print a copy of the document on the scanner. But when you run the HP Scan 3 application, the error message is displayed: scanner communication cann
-
I have a nagging feeling I can have stupidly done something by going to HKEY current configuration. either the HKEY classes. Not sure it was some time ago in the meantime I use for my Yahoo mail but I miss my Outlook Express
-
When I put a dvd or cd it does not recognize it. tells me to insert the cd or dvd
DVD and CD or is not being recognized or read in my drive. He always tells me to insert the cd or dvd. What should I do? I seem to have several problems. Can't find my windows media player, also when it is connected to the tv with hdmi, I have no sou
-
Dropped of Xperia Z2 floor with a distance of 0, 2 m
Yesterday my Xperia Z2 (bought 2 months ago) fell from my pocket, a fall with a distance of 0, 2 m on a hardwood floor. The mobile instantly turned off, not been able to put in operation since. I tried troubleshooting suggested by pressing the power