PHP mail can be disabled or misconfigured web server.

Similar Questions

• PHP is not properly configured on your web server.

  Hello, I download a site Web of muse and me always error at the end - "1 WARNING.
  PHP is not properly configured on your web server. Forms of the muse does not work correctly unless PHP is enabled on the web server. Contact your Web host or Web site administrator on how to enable PHP support. "
  
  already on the site online form that do not send the email from the same mistake.
  
  How can I solve my problem?
  
  Thank you

  
  

  Margarida Amara

  Hello Margarida,

  Your Web host must support PHP and the PHP mail service must be properly configured to send e-mail messages. If you use the feature to download FTP in the Muse, Muse will attempt to warn you if it detects that your Web host does not meet these requirements.

  I suggest you contact your hosting provider in order to get this resolved.

  Thank you

  Ankush;

• PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctl

  PHP form script is missing from the web server or PHP is not properly configured on your web hosting provider. Help - I get this message on my site when the form is filled out and you press send... Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP.

  Hi Graham,

  If you, please add your site to this link ( http://my-site.com/scripts/form_check.php ) and make sure that all green checkmarks are appearing. If they don't, let us know what errors you seem to receive and include the link to your site.

  In addition, check out this guide on the forums of Muse troubleshooting: Troubleshooting Muse form used on the servers of third party Widgets

  I hope this helps!

  Emily

• I can\ to connect to the web server integrated on my D7460?

  Hello

  I had some problems with my Photosmart D7460 printer and resolved (for now) most of them.

  Except that I can't connect to the built-in web server. Also, I do not get a response when I try and ping the printer.

  Giving to think I have problems of network with the exception that I can print to this printer... Well well, from most of the computers on the network, but that's another story.

  I checked what the said road IP address he gave to the printer.

  Any suggestions would be welcome.

  OK, I seem to have solved the problem.

  I'm not sure that bit of material, it was causing the problem but it seems to come form tries to use "WPA & WPA2" parameters (BT Home Hub 3.0) wireless access point.

  Who having spent 'WPA only' I can now ping, print and connect to the web server.

• PHP form script is missing on the web server. What now?

  Go for now, I have the link for the form site phone: http://hopsewee.com/phone/southern-Planation-weddings.html

  on the version of office to complete and submit: Contact us on your wedding Hopsewee

  However the form works fine on my iPhone, but Android users get the error:

  "PHP script form is missing from web server or PHP is not properly configured on your web hosting provider. Check if the form PHP script has been downloaded correctly, contact your host about the configuration of PHP. »

  So far all forms worked and the customer receives the bid. It's GoDaddy hosting and GoDaddy email. The result of my scripts/form_check.php has two green controls and no third article. Since forms are working the case, I'm at a total loss about where to go next in terms of troubleshooting.

  It looks like a small problem with the hosting or the network connection which translates the .php file not to load. Everyone continues to encounter this error? It met on multiple devices/computers? If so, what did the devices/computers have in common (regarding the OS, browser, network connection or just the time during which the attempt to load the page)?

• How can I disable the MonitorPrintJobStatus on Server 2008 R2 RDS for all users?

  We have a Server 2008 R2 RDS with HP LaserJet printers installed.  At every printjob printer monitor HP arrives.

  How can I disable this printer for all users?

  THX

  Tcpip

  I found it here:

  http://h20000.www2.HP.com/BC/docs/support/SupportManual/c00767072/c00767072.PDF

  the registry key is

  SSNPNotifyEventSetting REG_DWORD 0x00000001; 0 = disabled.

• Where can I find the integrated Web server for a Photosmart 7520?

  I want to change the password for direct printing and the touch screen says change in SAP.  Where the built-in Web server?

  The SAP is the built-in Web server. It is the internal Web site created for the printer when connected to a network.

  To access SAP:
  * Get the IP address of the printer from the control panel of the unit
  * Web open favorite, program navigation
  * Type the IP address in the URL bar and press ENTER to access the page

  Let me know if you need more information.

• e-mail can be disabled and TB used as a calendar only?

  I had installed TB, I set my email, however, now I want to use TB as a CALENDAR only, is possible to close the tab "email"? Make a right-click only allows you to "close other tabs", to not close the email tab.

  I guess I could remove the email account, but maybe it's an overdose, b/c, there may be a time, once a month, I can access this e-mail on this device. just I want to open the calendar only on this unit... and e-mail via other means on an another playback device.

  Any help appreciated.

  The add-on Regis can be interesting to look at. TB, it allows you to run the lightning calendar in a separate window, so you can close or minimize the window of primary e-mail TB. If it is installed in SeaMonkey, it seems that you can launch the calendar itself when you run SM.

• How can I disable AutoComplete in Web pages? No address bar autocomplete. In addition, delete the cache.

  I just want to go on a specific site where I have a dial-up connection and type my username in the username every time box instead of having semi-automatic before entry to come. I don't want my username to be cached and I would like to delete the cache that exists. Thank you.

  Follow these steps to delete the recorded data (form) in a drop-down list:

  1. Click on the (empty) input field on the web page to open the drop-down list
  2. Select an entry in the drop-down list
  3. Press the DELETE key (on a Mac: shift + delete) to remove it.
  • http://KB.mozillazine.org/Deleting_autocomplete_entries

• How can I save a unencripted of encrypted e-mail so e-mail can be shared internally to the server?

  Office sharing a server internal to save specific e-mails encrypted.

  When we receive emails save us emails to a folder shared which all individuals required power complete/admin to the folders on the server.

  If the person 'a' E-mail saves anyone shared pilot 'b' cannot open the email when necessary, even if person "b" is has full authority in the folder/drive.

  We always receive the following error message: cannot find your ID digital nam by the underlying security system.

  Any help would be greatly appreciated.

  Hello.

  Please post the question in the below mentioned link and see if it works.

  http://answers.Microsoft.com/en-us/Office/Forum/Office_2007-Outlook?TM=1367512724629&tab=all

  Good day!

• PHP mail - does not send

  Hello. I try to send an email with the site that I developed and published, but I get the following error message: php form script is missing from the Web server...
  
  In some related discussions, asked to test with http://emocionaldosfilhos.com.br/scripts/form_check.php
  
  which leads in failure following point:
  
  Spam Control: Cannot write scripts directory. Form can send successfully, but limiting the spam by its address IP will not work.
  
  I don't know how to solve. Could help?

  Hi friend. Yes, also, I talked to Locaweb team (where my site is hosted). They pointed out that for the well-functioning of the email send with PHP, they require messages to be sent within the international standard RFC 822. They sent an example of how to complete the process:

  <>
  The sender must be an e-mail from your domain in accordance with RFC 822.
  The return - path must be the same sender.
  $ headers = "" MIME - Version: 1.1 \ r \n ";"
  $ headers = "Content-type: text / plain;" "charset = iso-8859-1-r-n". ;
  $ headers = "from: [email protected] ------r------n. ; sender
  $ headers = ' Return - Path: [email protected] -r-n ". ; -Return path
  Send $ mail = (' [email protected] ', 'topic', 'Text', $ headers);

  If ($ encoding)
  echo "Message sent successfully ';
  on the other
  ECHO "the message cannot be sent.
  ? >

  So, they said they will work, but I need to know where I change.

• lost pop mail / windows live mail, can not send, have cricket server, they do not support

  lost my pop mail/windows live mail, can not send letters, are new server of cricket, they don't support, I don't know how to change or where to go in the Control Panel, unless someone guides me

  This has nothing to do with Windows Update.

  You will find support for Windows Live Mail in this forum: http://windowslivehelp.com/forums.aspx?forumid=b91657c9-9031-4406-a398-7d0783119bb7

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Best web server IIS or Linux for Dreamweaver CS4?

  I'm mainly a developer using IIS 7 .NET framework, Visual Studio 2008 did a horrible job of web development of the GUI, good in support of the database, but its ability to produce beautiful front-end is horrible and extremely bug.  so... I'm looking to Dreamweaver CS4 and I'm about to buy a GoDaddy hosting solution and have to decide if I should go with Linux or IIS.

  So my question:

  1. who is the platform is best for Dreamweaver CS4?  IIS or Linux?

  2. what additional components (if any) my hosting service will need to have installed on the web server to get all the benefits of the production of CS4?

  3. is there something in CS4 where I can specify my web server platform?

  Thank you, Rob.

  Hello

  Questions-

  1 hotspot (mouse on) images which will adjust and display additional information

  2 eCommerce support using PayPal

  3 provision to size sets

  4. future: Mobile device site possible so he needs to detect devices of connection

  5. the future: possible / / database support (probably MySQL - complex simple nothing)

  Answers-

  All except point 5 are objects on the client and nothing to do with your server.

  In regard to point 5 the I advise to use Linux with php/mysql.

  Could you give some details on site "slap" which requires additional components installed on the web server?

  Using php, you can resize the images on the server for delivery to the customer, it would also require the installed php GD extension, ensure that the version of php is a minimum of 5.2.9, whatever it is less is not recommended in my opinion, and your MySQL version 5 database.

  The full list of why these versions and which php extensions, you should have depends on your future needs, but check with the web site of e-commerce on their requirements for php as well.

  PZ

• Project created after installing the new update for CP9 does not not on Web server

  We upgraded 2 computers yesterday with the new update for 9 Captivate and that they will not play on our web server.  We have completed the upgrade of projects work very well.

  New projects are working fine locally.  I had to open these on a computer that has not been to level again and then make a new project and copy the slides in the new draft and publish it.  Then it works on our web server.

  Hi Susan,.

  Can you check with your Web server administrator that the list of permitted such MIME type entry for json files?

  It is a necessity with the changes in the recent update to HTML5 runtime. Please let me know if that solves the problem.

  Thank you

  Aditya

• How to change the local IP on the virtual NETWORK adapter for Web server address

  Hi all

  I have a physical Windows system, on which I run VMware Workstation 9. Now on VMware I run Ubuntu 12.10 a LAMP for a Web server.
  Problem:
  Now, my local IP address for my NETWORK card virtual (using the Ubuntu one) at the address 192.168.159.7 and my router only emits the 10.0.0.x range IP addresses. So if I want to port forward to the virtual NETWORK adapter that has a 192.168 address, I can't, so my LAMP Web server are not accessible to the outside because the router does not send packets on port 80 to the virtual card... How to fix this?
  The only way I guess that is to be assigned an ip address of 10.0.0.x to the virtual NETWORK adapter?
  But how do I do this?
  I tried to do it on the host from the Windows machine with "get my IP address automatically", but she emits an 192.168 address every time...
  Thank you

  Welcome to the community,

  I guess that the virtual computer is currently configured to "NAT" or "Host-Only' networking! That would explain the 192.168.x.x IP address.

  There are 2 options to be able to access the web server on the virtual computer.

  1. with "NAT" network configured

  In this case forward port 80 to the IP address of the host and configure the port forwarding on the virtual computer in the "Virtual Network Editor. This way you can leave the IP address on the private network of 192 (if it is currently set to NAT)

  2. use "Bridged" network layout

  Reconfigure the virtual NETWORK adapter to the machine virtual networking "Bridged" within the parameters of the virtual machine, assign an IP address from your router network (10.x.x.x) and do the port forwarding on the router directly to the IP address of the virtual machine.

  André